Commit Graph

28 Commits

Author SHA1 Message Date
Egon Elbre
0bdb952269 all: use keyed special comment
Change-Id: I57f6af053382c638026b64c5ff77b169bd3c6c8b
2020-10-13 15:13:41 +03:00
Cameron Ayer
ca0c1a5f0c storagenode/{monitor,pieces}, storage/filestore: add loop to check storage directory writability
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.

Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
2020-08-31 21:20:49 +00:00
Cameron Ayer
586e6f2f13 private/testblobs, storage, storage/filestore: add storage dir verification to filestore
Sometimes SNOs fail to properly configure or lose connection to their storage directory
which can result in DQ. This causes unnecessary repair and is unfortunate for all parties.

This change introduces the creation of a special file in the storage directory at runtime
containing the node ID. While the storage node runs, it periodically verifies that it can
find said file with the correct contents in the correct location. If not, the node will
shut down with an error message.

This change will solve the issue of nodes losing access to the storage directory, but it will not
solve the issue of nodes pointing to the wrong directory, as the identifying file is created each
time the node starts up. After this change has been the minimum version for a few releases, we will
remove the creation of the directory-identifying file from the storage node run command and add it
to the setup command.

Change-Id: Ib7b10e96ac07373219835e39239e93957e7667a4
2020-08-19 17:18:14 +00:00
Egon Elbre
94a09ce20b all: add missing dots
Change-Id: I93b86c9fb3398c5d3c9121b8859dad1c615fa23a
2020-08-11 17:50:01 +03:00
Egon Elbre
e70da5cd4e all: fix comments
Change-Id: I2d2307e3fab87de47a72b3595d051e2c95ff4f8a
2020-07-16 19:13:14 +03:00
Egon Elbre
080ba47a06 all: fix dots
Change-Id: I6a419c62700c568254ff67ae5b73efed2fc98aa2
2020-07-16 14:58:28 +00:00
stefanbenten
257855b5de all: replace == comparison with errors.Is
Change-Id: I05d9a369c7c6f144b94a4c524e8aea18eb9cb714
2020-07-14 15:50:25 +00:00
Qweder93
0521435e08 storagenode/gracefulexit: added deletion of all files left in storage/blobs/satellite after successful GE
https://storjlabs.atlassian.net/browse/SG-368

Change-Id: I29a978fe0d0153aedf2be91dc7f45b4ef386d447
2020-07-08 14:38:31 +03:00
Qweder93
f2a0c64425 storage/filestore: log potential disk corruption
In walkNamespaceWithPrefix log in case of "lstat" error, because this may indicate an underlying disk corruption.

SG-50

Change-Id: I867c3ffc47cfac325ae90658ec4780d213ff3e63
2020-05-27 12:12:55 +00:00
Egon Elbre
c630cf2490 storagenode/pieces: implement buffering for writing
Currently uploads can cause a lot of IOPS, reduce this by introducing a
in-memory buffer on-top of the file.

Change-Id: I5f4e3e01c0a36258271d180b922107de447bcb59
2020-05-04 06:01:32 +00:00
Qweder93
6c4d3f133f storagenode/dashboard: trash added to avaliable space calculations
Change-Id: Ia6f3af20dc98f569b86796ffa68428065d662c78
2020-05-01 15:26:02 +00:00
Jeff Wendling
7999d24f81 all: use monkit v3
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.

graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.

it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.

Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
2020-02-05 23:53:17 +00:00
Isaac Hess
7d1e28ea30 storagenode: Include trash space when calculating space used
This commit adds functionality to include the space used in the trash
directory when calculating available space on the node.

It also includes this trash value in the space used cache, with methods
to keep the cache up-to-date as files are trashed, restored, and
emptied.

As part of the commit, the RestoreTrash and EmptyTrash methods have
slightly changed signatures. RestoreTrash now also returns the keys that
were restored, while EmptyTrash also returns the total disk space
recovered. Each of these changes makes it possible to keep the cache
up-to-date and know how much space is being used/recovered.

Also changed is the signature of PieceStoreAccess.ContentSize method.
Previously this method returns only the content size of the blob,
removing the size of any header data. This method has been renamed
`Size` and returns both the full disk size and content size of the blob.
This allows us to only stat the file once, and in some instances (i.e.
cache) knowing the full file size is useful.

Note: This commit simply adds the trash size data to the piece size data
we were already collecting. The piece size data is not accurate for all
use-cases (e.g. because it does not contain piece header data); however,
this commit does not fix that problem. Now that the ContentSize (Size)
method returns the full size of the file, it should be easier to fix
this problem in a future commit.

Change-Id: I4a6cae09e262c8452a618116d1dc66b687f59f85
2019-12-23 19:07:03 -07:00
Ivan Fraixedes
42c61138e8
storage: Improve doc comments delete methods (#3591)
Improve the documentation of several methods involved in the delete
operation to make clear their behavior without having to inspect their
logic.
2019-12-02 12:18:20 +01:00
Isaac Hess
a6235d3962 storage/filestore: Monitor when we open files in trash
Change-Id: I817bf8349c2e1ba55e1490f06162af1099bebdb0
2019-11-26 14:38:49 -07:00
Isaac Hess
56f8fd2dd7
storagenode/pieces: Add EmptyTrash functionality (#3640)
* storagenode/pieces: Add EmptyTrash functionality

* storagenode/pieces: Fix err

* storagenode/pieces: Fix lint
2019-11-26 09:25:21 -07:00
Isaac Hess
2166c2a21b
storage/filestore: Add Trash and RestoreTrash to Blobs (#3529)
* storage/filestore: Add Trash and RestoreTrash to Blobs

* Change restore to be satellite-specific

* Fix comment

* Fix merge rename conflict
2019-11-14 15:19:15 -07:00
paul cannon
bd89f51c66
Keep v0pieceinfo database isolated (#3364)
* put TestCreateV0 back in StoreForTest
* avoid direct handles to V0 pieceinfo db
* type mismatch fix
* use storage.Blobs interface in store_test.go

..instead of filestore.Store. this will allow filestore.Store to become
unexported.

* unexport filestore.Store

rename it to blobStore. things should use the storage.Blobs interface
instead. changes in this commit are purely mechanical (made through the
"refactor" tool in Gocode followed by search/replace on the word "Store"
within the storage/filestore/ directory).

* kill filestore.StoreForTest

now that filestore.blobStore is unexported, there isn't a need for a
specialized wrapper type. this (not coincidentally) also makes it
possible for the WriterForFormatVersion() method on
storagenode/pieces.StoreForTest to work, without requiring everything to
wrap the store.blobs attribute in a filestore.StoreForTest, which was
impractical.
2019-11-13 13:15:31 -06:00
Isaac Hess
4d26d0a6a6 storagenode/pieces: Add migration from v0 piece to v1 piece (#3401) 2019-11-04 17:59:45 +01:00
Jess G
022f5d2e14
storagenode: add space used cache for pieces (#2753)
* add cache, update cache w/piece create/delete

* add service w/loop to cache to recalculate space used cache

* add piecestore cache to other sn svcs to use

* add table to persist the total space used

* rm cache where not needed

* rm stuff from sn svcs

* start fixing tests, changes per comments

* update commits

* add unit tests

* fix commiting before we write header bytes

* fix cache create test

* copy cache map, add started back to recalc

* fix test

* add test, update comments
2019-08-12 14:43:05 -07:00
paul cannon
17bdb5e9e5
move piece info into files (#2629)
Deprecate the pieceinfo database, and start storing piece info as a header to
piece files. Institute a "storage format version" concept allowing us to handle
pieces stored under multiple different types of storage. Add a piece_expirations
table which will still be used to track expiration times, so we can query it, but
which should be much smaller than the pieceinfo database would be for the
same number of pieces. (Only pieces with expiration times need to be stored in piece_expirations, and we don't need to store large byte blobs like the serialized
order limit, etc.) Use specialized names for accessing any functionality related
only to dealing with V0 pieces (e.g., `store.V0PieceInfo()`). Move SpaceUsed-
type functionality under the purview of the piece store. Add some generic
interfaces for traversing all blobs or all pieces. Add lots of tests.
2019-08-07 20:47:30 -05:00
JT Olio
679cdfda9e storage/filestore: add monkit task to missing places (#2124)
Change-Id: I61f8056617a8d0596a00c232a6d0b330909e08f9
2019-06-05 15:06:06 +02:00
Kaloyan Raev
2ab95b533e
Check errors for possible outcomes from audit's DownloadShares (#2072) 2019-06-03 12:17:09 +03:00
Egon Elbre
05d148aeb5
Storage node and upload/download protocol refactor (#1422)
refactor storage node server
refactor upload and download protocol
2019-03-18 12:55:06 +02:00
Egon Elbre
773d6a7ad1
filestore changes for piece store (#1437) 2019-03-11 10:06:56 +02:00
Jennifer Li Johnson
856b98997c
updates copyright 2018 to 2019 (#1133) 2019-01-24 15:15:10 -05:00
Egon Elbre
c4c9e75109
Use errs.Combine in storage (#923) 2018-12-21 12:54:20 +02:00
Egon Elbre
c9cabaf73a
storage/filestore (#384) 2018-09-28 09:59:27 +03:00