First from two methods needed to perform server-side move. It gets
metadata key and nonce and all segments key and nonces and returns
all of that to uplink.
Change-Id: Ied2c79559e77d3f63091c4d61948f2d6a2147d67
Remove the logic associated to the old transfer queue.
A new transfer queue (gracefulexit_segment_transfer_queue) has been created for migration to segmentLoop.
Transfers from the old queue were not moved to the new queue.
Instead, it was still used for nodes which have initiated graceful exit before migration.
There is no such node left, so we can remove all this logic.
In a next step, we will drop the table.
Change-Id: I3aa9bc29b76065d34b57a73f6e9c9d0297587f54
Currently TextMaxVerifyCount flakes in some tests, try increasing the
sleep time to ensure that things are slow enough to trigger the error
condition.
Also pass ctx to all the funcs so we can handle sleep better.
Change-Id: I605b6ea8b14a0a66d81a605ce3251f57a1669c00
Currently, requests that were successfully passed through the metainfo
endpoints rate-limiter might still fail in the middle of the
corresponding response. The problem is that we perform rate-limiting a
second time, which means other requests would influence whether the
current (already rate-checked) request will fail. This also has other
unintended effects, like responding with rpcstatus.PermissionDenied for
requests that were successfully rate-checked and did not lack
permissions but were rate-checked again in the middle of
(*Endpoint).BeginObject. This situation has been happening on the
gateway side and might affect other uplink clients. This change, where
appropriate, swaps subsequent validateAuth with validateAuthN that
performs rate-limiting once.
Change-Id: I6fc26dedb8c442dd20acaab5942f751279020b08
Current default is equal to hardcoded maximum of batch size
for loop listing. With this change we will bump maximum
batch size but current default won't change. We will be able to
increase it later without need for source code change.
Change-Id: I2744a87be28af4157f58ede73455682f61733bc1
We were using this method for metainfo loop but now
segment loop is not using it so we can drop it.
Change-Id: I60c5b4f86a619259906d8c2ba76e665b8715be75
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
* Disabled updating project for paid tier users who have 0 storage or
bandwidth limits set (these users have been disabled and should not be
able to increase their limits through the UI)
* Better error handling
* Removed unnecessary type conversions
Change-Id: I1e07a1909a4ba877718aa944848f36382f7dbbe2
GetRandomStripe function to randomly select a segment stripe to
audit was using `segment.EncryptedSize/segment.Redundancy.StripeSize()`.
Since integer divsion truncates it leads to skipping last stripe if
its size is less than stripe size. Use `Redundancy.StripeCount` to
get correct stripe count.
Change-Id: Ida09e035be30a21219ab3e1aedd66af8be707d1b
Don't update the project description if the request body has the
description field set to an empty string.
This follows the same convention used for updating an user's account.
Change-Id: I027047e609760e033cf4b233b1be352c6bf0ec8f
the month
The Stripe API had a bug before that it wasn't calcualting the input
timestamp based on correct timezone. We had a workaround to not include
the last day of the month in our code when submitting to Stripe.
Now, Stripe has fixed the issue. We need to remove the workaround and
include the last day of the month into our invoice generation
Change-Id: Ic6364ed071be73a19f0b0b46f274a02fb2489db5
If we encounter an error during the infectious error correction, we just
add it to the errlist to be logged at the worker level.
We want to make sure we know about this if it happens. Give it its own
error log and increment a monkit metric.
Change-Id: Ie5946ae3cd97b766e3099af8ce160a686135ee27
Additional test case where user is uploading 3 segments
each within 23h interval and when zombie deletion process
is executed then nothing is deleted because last segment
was uploaded in less then 24h.
Change-Id: I7426d6fe2c7e9b88c054a01408910c986bcf8d5f
Two small cleanups:
* merging private commitObject, commitSegment,
makeInlineSegment with its public versions. We were
using it when pb.Pointer was still used.
* removing unused CreatePath method
Change-Id: Ib18b07473d91259335dab874559ef52412ab813d
Currently, post requests originating from www.storj.io are failing
because the content-type header is not permitted for the /register
endpoint.
Change-Id: I14f21c2a27d8f0c8bae3609a5bf4b1e69a72c119
Rate limits application of coupon codes by user ID to prevent
brute forcing. Refactors the rate limiter to allow limiting based
on arbitrary criteria and not just by IP.
Change-Id: I99d6749bd5b5e47d7e1aeb0314e363a8e7259dba
Added options flag to define after which object won't be marked as inactive. All segments CreatedAt
time needs to be bellow this flag to treat object as inactive.
Change-Id: Ib5cffc776c6ee1b62b51eb8595438f968b42528c
When a node gets enough timeouts, it is supposed to be removed
from pending_audits and get an audit failure. We would give them
a failure, but we missed the removal. This change fixes it.
Change-Id: I2f7014e28d7d9b01a9d051f5bbb4f67c86c7b36b
"audit failed" is already used when a node fails an audit. That makes
searching for this higher level audit worker error more difficult.
Additionally, the presence of errors from the audit worker doesn't
necessarily mean the audit failed. Reword the error message to
"error(s) during audit"
Change-Id: I0aab12c73c18d4bd962c5d8ac8a17cabcec022e6
This change syncs batchSizeLimit and ListLimit constants to prevent
throwing away results returned while listing with a maximum returns
limit.
Change-Id: Ie2425542d945cb88653dcc34c079737bb32320d4
This currently contains tests for both graphql and regular endpoints.
Co-authored-by: Antonio Franco <antonio@storj.io>
Change-Id: I28d7e629b1caa114438d6fbc3abcc079a8ca10a6
This change allows users to disable multi-factor authentication
with a recovery code. Previously, users could only disable MFA
with a passcode.
Change-Id: Iec20bf7d8f6781182b81d1f17d9641491dbc8460
This command is intended to be run as part of invoice generation - it
iterates over Stripe customers, and applies the free tier coupon to any
customer who doesn't already have a coupon.
This way, we can ensure that all customers have at least the free tier
coupon before and after invoice generation, in case a different coupon
has expired.
Change-Id: I33a4aff9174049f9e051de53ef65298ca65ed688
Adds a banner at the top of the dashboard warning the user if he
has 3 or less MFA recovery codes.
Change-Id: I3271f1fe33501eaeeeca343bf60ca899e80f0fa1
Added editable fields to the project details page for Storage Limit and Bandwidth limit. Leveraged existing types when possible.
Added fixed checking into the limits to prevent reducing limits beyond current usage, as well as limiting usage to less than the default paid tier maximum.
Change-Id: I07ce53470919a8a9d4dce56ade6904ede8daf34c
Set the Access-Control-Allow-Origin header if a request is made to the
registration endpoint from storj.io or www.storj.io. This allows the
client to make the request with no issues.
Change-Id: I0cd747ececfe877fb5f834d8292307fc14e3db5c
We're seeing BeginDeleteObject in metaclient returning object not found:
metabase: no rows deleted in the Gateway-MT mint tests. There's a
client check for rpcStatus.NotFound, but the metabase endpoint isn't
wrapping the db error as a DRPC error.
Here's the chain:
gateway.AbortMultipartUpload()
project.AbortUpload()
metainfoClient.BeginDeleteObject() <- understands DRPC errors
endpoint.DeletePendingObject() <- where this code is
db.DeletePendingObject() <- returns error
Change-Id: I93991de76487426df0a807b0d1e69fc975196a1a
nodes and audit_history tables
This PR removes all code reference to audit_histories table and
```
audit_reputation_alpha, audit_reputation_beta,
unknown_audit_reputation_alpha, unknown_audit_reputation_beta,
```
columns from nodes table.
It also drops audit_histories table from the db since the code
that's referencing it currently are not being used.
Change-Id: Ifcda8db36afb3a333d487ff831f2fdefc8b02a4c
Updates the password reset page to use the new theme.
Adds new endpoint '/api/v0/auth/reset-password'
for password reset.
Additionally, updates the link-clicking mail simulator to only
click links with a specified attribute. Otherwise, the password reset
cancellation link would be clicked before the password reset link
could be accessed, rendering testing impossible.
Change-Id: I8fde74ef7ad980880a7bf6558e3b9ed31509a393
When we can't complete an audit or repair, we need more information about
what happened during each individual share/piece download.
In audit, add the number of offline, unknown, contained, failed nodes to
the error log. In repair, combine the errors from each download and add
them to the error log.
Change-Id: Ic5d2a0f3f291f26cb82662bfb37355dd2b5c89ba
To optimize memory consumption we where consuming
segment data during processing results from delete
query. Turns out that there is a chance that query will be
rolled-back if something will go wrong while reading
results. In such case its possible to delete pices but
object/segment will be still in DB.
This change removed piece deletion from problematic
place. Pieces are still deleted in batches but are not
limited at the moment. To avoid memory issues object
deletion batch was decreased.
Change-Id: Icb3667220f9c25f64b73cf71d0cf3fdc7e5107c5
Rename the entities in the endpoint paths from singular after we have
agreed that it matches with API design best practices.
Change-Id: I5bdc086c64c6f93e45a13436b65863fc3e8d864e
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
MFA is complete and we are good to enable it in production. This change
removes the flag that disables MFA by default.
Change-Id: I2f985ae501171bdab505d664b43c8cfc248bad8d
We need a way to delete whole part. This especially
needed for uplink multipart API to do cleanup after
aborted or failed part upload.
Test will be added when uplink part will be merged.
Change-Id: I9ba69a49e1adcdce0f42dd3a76f938fcf931155a
This change adds dedicated methods on metabase.Pieces to be able to add, remove pieces and also to check duplicates.
Change-Id: I21aaeff40c017c2ebe1cc85a864ae546754769cc
Added includeMetadata parameter which represents if metadata should be included in response
by default true, in case of new uplink version - ObjectIncludes will be used instead.
Change-Id: I2f8d3b4cc354cd655f8093bbbebe0e3c2ae14e6f
Error from joining loop should not restart satellite. This will be the
same error like for loop itself. In the same way we are handling joining
error for other services that are using segment loop.
Change-Id: Idf1035ef7f78462927bd23989ed8a4ee5826c49e
In case when number of deleted segments in a single
batch was multiplication of opts.DeletePiecesBatchSize it
was possible to finish deletion of objects to early.
Change-Id: I9181d4a3c64053d9df46a11a6e0cd22153c73ee9
Added Enter MFA passcode step to login after first attempt.
Connected client-side and server-side.
Change-Id: I4482afde50172bbf2c598aa01bbd220763b4f6d1
We made decision to avoid satellite shutdown when segment loop
will return error. Loop still can reeturn error but it will be logged
and we will make monitoring/alert around that error.
Change-Id: I6aa8e284406edf644a09d6b1fe00c3155c5430c9
Error message for attempting to activate an already-activated
account is removed from its own page and incorporated into the
login page in an identical manner to the message that appears
upon successful activation.
Change-Id: I29cd2685a7808fa71d34a439c86a38eb5fc3e199
It turns out that some DB methods are not
passing context to to lower levels even if have
context as a parameter.
Change-Id: I82f4fc1a47c362687a91364d85e4468057e53134
gracefulexit
With the effort to move audit related data into reputation store, this
PR updates gracefulexit endpoint to use reputation service to get a
node's audit score
Change-Id: Iad93ea689ad67ff9c57c7be16687e21e715fab7a
Currently, reputation table is only populated when a node has been
audited. This is ok in production, however a lot of our tests doesn't
upload any data or trigger audits.
This PR adds an initialization step in testplanet to populate reputation
table with zero value for nodes reputation.
Change-Id: I11b381236669db346dc68a48a6d4a27334a0a8b8
package in audit
This PR implements reputation store and replace overlay in audit service
to use such store for storing node's audit stats.
In order to keep the changeset smaller, most of the changes in this PR is for copying audit logic in overlay to
reputation package. In a following PR, the duplicating code will be
removed from overlay.
Change-Id: I16c12494a0970f44c422b26cf603c1dc489e5bc1
In the past ExpirationDate was available inside CreatePutRepairOrderLimits
but this was removed since the metabase segment was missing the ExpiresAt field.
Now ExpiresAt field is available in the metabase segment
and can be set correctly while executing NewSignerRepairPut.
Change-Id: I068c07492ab27bde2c44477bbd32c5872edd024a
Full path: satellite/{payments,console},web/satellite
* Adds the ability to apply coupon codes from the billing page in the
satellite UI.
* Flag for coupon code UI is split into two flags - one for the billing
page and one for the signup page. This commit implements the first, but
not the second.
* Update the Stripe dependency to v72, which is necessary to
use Stripe's promo code functionality.
Change-Id: I19d9815c48205932bef68d87d5cb0b000498fa70
Added MFA passcode and recovery code field for token requests.
Added endpoints for MFA-related activity: enabling MFA,
disabling MFA, generating a new MFA secret key, and
generating new MFA recovery codes.
Change-Id: Ia1443f05d3a2fecaa7f170f56d73c7a4e9b69ad5
Provides the means to serve an error to the user with a user-friendly
error message (serveCustomJSONError). Auth API uses this when
processing registration attempts.
Previously, the error message was inferred by the client based on
the status code of the response received from the server. However,
if multiple distinct errors fit a certain status code, it was impossible
to correctly interpret the error.
Change-Id: I2f91e9c81ba1a4d14ba67e0b4b531a48800d4799
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration and made accessible through graceful exit db in another one.
This changes makes graceful exit enqueue transfer items for new exiting nodes in the new table.
Change-Id: I7bd00de13e749be521d63ef3b80c168df66b9433
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration.
This change gives access to this table.
Graceful Exit doesn't use the table yet, this will be done in a next change.
Change-Id: I6c09cff4cc45f0529813a8898ddb2d14aadb2cb8
In most situations where we would not get enough shares to complete
an audit, something has probably gone wrong like a forgotten delete,
and nodes should not be failed. We have an alert when this occurs.
Check the logs to see what happened. If we decide the nodes should
get audit failures, we can do it manually.
Change-Id: Ib6e408082048d31197c37ebfd7f9031135fc938f
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
Columns for MFA status, secret key, and JSON-encoded array of
recovery codes are added to the users table.
Change-Id: Ifed7e50ec9767c1670d9682df1575678984daa60
Added feature flag for MFA
Added new client-side api call to enable MFA returning secret
Updated users Vuex module to include new API call
Change-Id: Ia9e10f68c4a7da39b4f7c1073e657c2de98fb0db
Current tally is calculating storage both for buckets and
storage nodes. This change is moving nodes storage
calculation to separate service that will be using
segment loop.
Change-Id: I9e68bfa0bc751c82ff738c71ca58d311f257bd8d
The user must complete a reCAPTCHA in order to register.
ReCAPTCHA verification failure results in rejection of the
registration attempt.
Change-Id: I34ba7db414d756fd1aaebdc3d19cccbfc7fc1ea3
When a user adds a credit card, switch them to the paid tier and update
their projects with new bandwidth/storage limits. New projects for the
paid tier user will also have the updated limits.
The new limits are:
* storage per project - 50 GB free/25 TB paid
* bandwidth per project - 50 GB free/100 TB paid
Change-Id: I7d6467d077e8bb2bbe4bcf88ab8d75490f83165e
The previous query was making a full table scan. This modifies code to
do the queries separately on each action. It will probably be slower on
a small table, however there should be a several magnitude boost on
large tables.
Change-Id: Ib8885024d8a5a0102bbab4ce09bd6af9047930c9
When the delta is very small from the bounds then the ratio calculation
doesn't work that well. Let's allow 100 from the bounds, since that
would be expected in any case.
We won't add a configuration for it, since it's not that useful.
Change-Id: I049066a42470b825f430b7f32ebe92d544c6cc8b
Added new info banner to show user their used and total storage values with a button to upgrade to Paid Tier with auto limit increase
Change-Id: I827818dcb5179358df246218a47feb61bc1a1bac
We want to calculate bucket tally only from iterating objects.
Object currently has an info about totals for bytes and segments.
We need to adjust tallies to keep those totals. Older entries will
be untouched and code will use totals only if available. Change
is adding columns for totals to bucket_storage_tally table and
is adding general handling for them.
Next step is to start using total columns instead of inline/remote.
This will be done with next change.
Change-Id: I37fed1b327789efcf1d0570318aee3045db17fad
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
So that we can easily see whether a user is in the paid tier without
querying for payment methods.
Change-Id: I122566ddd0953203f852741fa12c71795bc1ec5c
Period end was calculated
incorrectly as it was still in current month but
should be the first day of next month.
Change-Id: I37451d29a9b901b69e6c3c401b333c58b3376d61
this service exists to do currency conversions, which is
the best I can assume that this was meant to be named.
Change-Id: Ia2416f5475749e8bfe8d05bf491649576f6d77bf
This change removes all the separate implementations for
`apiservice.serveJSONError()` and defines one for every service to use
in `consoleapi/common.go`.
Change-Id: Iabf184e5cba69a98eb25936ce11ebd07f02c8ff3
Because of our free/paid tier plan, we do not need a paywall anymore. We
have not used it in a while, but still have leftover code laying around.
Change-Id: Iaea8c39faf042a2f7a6b837727bb135c8bdf2907
Adding AS OF SYSTEM TIME to query that is calculating project bandiwdth.
As an addition method for setting interval is added as test doesn't
work well with default interval.
Change-Id: Id1e15be4f6afff13b9dc2b7f595e2edb6de28db9
Currently, pending audit is finding segment by segment location
(path) because we want to move audit to segmentloop and we will
have only StreamID and Position we need to add columns for those
fields. Altering existing table can cause issues while
migration and deployment. Cleaner choise is to make new table.
This change contains migration with new segment_pending_audit
table that will replace pending_audits table and adjustments
to use new table in the code.
Table pending_audits will be dropped with next release.
Change-Id: Id507e29c152da594bac1fd812c78d7ecf45ec51f
table graceful_exit_segment_transfer_queue will be used to replace graceful_exit_transfer_queue. Currently, it uses the path of a segment to keep track of pieces to be transferred. As we want to use the segment metainfo loop, we will need to record stream_id and position of the segment instead of relying on object path.
This change also add a uses_segment_transfer_queue column to the graceful_exit_progress table to be able to know if a transfer has been initiated while using the old table.
Change-Id: Iafb1e8e65ba124e20de4a9ff76da181c3222de7e
Added new endpoint and service method to return total usage and limits for all the projects that user owns.
It is needed for new paid tier UI
Change-Id: Ic5b67ca7b275ec4930d976a007168235c0500b70
It's possible that single object will have a lot of segments and
at the moment we are trying to collect all pieces at once and
send to storage nodes information about deletion. Such
approach my lead to using extensive amount of memory. This
change is handling this problem by calling DeletePieces
function multiple times with only part of pieces to delete for
a single call.
Change-Id: Ie1e66cd9d86d130eb89a61cf6e23f38b8cb8859e
Define service and DB interface for storing node reputation data
and updating the overlay cache.
Add overlay service and DB method UpdateReputation.
See https://github.com/storj/storj/pull/4144
Change-Id: Iedd8bd3274457d26c595919303d55327c1464b8c
The reputation table duplicates the reputation information in the
nodes table. It will be used for implementing the reputation
service.
Change-Id: I36c0318e8fa5f535e9d527df95b22a4f9eb365d4
the very common case is that the node api version is
indeed at least the requested version, so query for
that first to avoid write traffic.
Change-Id: Ib047d93078205bc07fee75d1f635503b792307f0
* added signup personal user test & added testDefault:true to OpenRegistrationEnabled in service.go
* added copyright
* fixed import ordering
* fixed comment formatting and gofmt-ed with -s
* gofmt-ed with -s and -w
* fixed fragile elements
* fixed one more fragile element
* fixed nesting
* removed unnecessary timeout
* fixed imports
We used this to reduce initial load on the core to avoid OOM. However,
this is not a problem anymore with garbage collection running
separately.
Change-Id: Ifd62c822a74974bc21a5913199334469a4bc0130
This adds verification for the processed count and before and after
segment/objects table counts.
This adds new flag:
metainfo.segment-loop.suspicious-processed-ratio: 0.03
This defaults to 3%, which at 100M segments is 3M segments.
Change-Id: I5ee03e913ddc4e67e94010ced126a2a9ea51f41b
This adds verification for the processed count and before and after
segment/objects table counts.
This adds new flag:
metainfo.loop.suspicious-processed-ratio: 0.03
This defaults to 3%, which at 100M objects is 3M objects.
Change-Id: Ife5522ecc97bcc5a55667f36868a0f1fc8e4c561
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Loops are using custom structs to provide
segments while iterating/looping so we need
to expose new field there too.
Change-Id: I12c8f4a01afeac171bf638d278253999fa90a8cb
We added expires_at column to segments table and now
we need to populate this column while committing segment.
We still need to migrate existing segments with
separate tool.
Change-Id: Ibac8c63d97201dd98cc2cb9db385f4cb73bc3f7e
Currently we did not limit the "as of system time" for iterating over
objects table. Using just an interval would cause problems with the
tests. That could be overcome skipping that interval for tests
altogether, however, we should probably test those more to ensure that
GC stays working as intended.
This is a safer code, however, maybe not as straigthforward as it could
be.
Change-Id: I374f77783b2af42bb6da846735ceea20a7ce5e60
The redis key associated to bandwidth usage depended on the current month.
This change makes it depends also on the day, so that we update bandwidth usage
daily to take into account changes associated to expired but not used allocated bandwidth.
It also add a test to to check that the allocated but not settled bandwidth is not counted after 2 days.
Change-Id: Iee9dbe3517cc3b9825438360b276a07a43dfbc64
Currently it's difficult to gather how many objects and segments are
being inserted. Adding separate monitoring counters make this easier.
Change-Id: I986cd82f03e99d2aa6fc76028255ee1090d1b294
Migration step for adding a 'egress_dead' column to the project_bandwidth_daily_rollups.
It will be used to track bandwidth allocation that won't be consumned
as the corresponding order has already been processed and has a settled
bandwidth amount lower than the order limit (allocated bandwidth).
Change-Id: Ic07592e69292ae2076e69f6038bb0e0fae79b271
Currently the iterate is being called in only one location so there's no
benefit in passing them as arguments over using the receiver.
Change-Id: I433a5d8b795b1bcc1f1e9320d87b10820cf537f1
Full prefix: web/satellite, satellite/{console, analytics, satellitedb}
- checkbox added to register view - business tab
- user being saved with new column
- add sales contact choice to Segment calls
- ui fix added to employee count dropdown
Change-Id: Ib976872463b88874ea9714db635d58c79cdbe3a1
In a rare case it's possible to start the loop iteration without
observers. The most likely case is that the observer is cancelled and
the coalesce timer trigger asynchronously, although being stopped.
Nevertheless, all the observers may also exit during the iteration, in
either case it should not result in an error.
If there's a probem with the observers, then they can report their own
error as they see fit.
Change-Id: Ie423fec41e6295be05536a4b7b0b6623ffebf2fb
We are not using this table so make no sense to put data there.
This change removes only code that is using this table. Before next
release we need to drop table with migration step.
Change-Id: I80f400aa778c717e70324bd00da502b7032c9d9f
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Until now, whenever audits were recorded we would try to delete
the node from containment just in case it exists. Since we now
want to treat segment repair downloads as audits, this would
erroneously remove nodes from containment, as repair does not go
through a Reverify step. With this changeset, (Batch)UpdateStats
will not remove nodes from containment. The Reverify method will
remove all necessary nodes from containment.
Change-Id: Iabc9496293076dccba32ddfa028e92580b26167f
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Previously the object range was not used for calculating order limit.
This meant that even if you were downloading only a small range it would
account bandwidth based on the full segment.
This doesn't fully address the accounting since the lazy segment
downloads do not send their requested range nor requested limit.
Change-Id: Ic811e570c889be87bac4293547d6537a255078da
There was a bug when user tried to get project after removing themselves from it.
Also we made user select firstly created project only if they removed themselves from current selected project.
Change-Id: I4b28ebc1ab4a8c14d05ef702e034f2ab39225cc3
Method IterateLoopSegments can be used to iterate over all segments in metabase without touching objects.
Change-Id: I3cc0e783884b603b47ef3f8233e357aa8a391250
Because of recent changes to how coupons for the free tier are handled
(see commit 4c0817bcfb), we no longer want all these $10
non-expiring coupons. After coupons are applied during invoice
generation, if a customer does not have any valid (non expired, non
consumed) coupons, a new promotional coupon is applied.
We could just wait for users to consume all $10 of the non-expiring
coupons, and the new promotional coupon would be applied for the
following billing cycle, but this gets tricky, because if in the final
month, the user is billed for $1 of usage, but only $0.5 of the $10
non-expiring coupon is remaining, the user will be charged for the
remaining $0.5. With the new promotional coupon of $1.65, expiring every
month, this would not be an issue.
So long story short, this commit migrates all non-expiring coupons to
expire within 2 billing periods (all existing non-expiring coupons in
prod were created in early April or later). That way, there is still
enough value in the $10 coupon that we don't have to worry about
customers exceeding it, and the coupons will expire. Then we'll
immediately apply the $1.65 coupon for the next month! And then
hopefully this unfortunate situation will come to a pleasant end.
Change-Id: I8a593948d8876c41a71d886b9a95d4e2c802b4f3
Replace GetProjectAllocatedBandwidth by GetProjectBandwidth which calculates
used bandwidth from allocated and settled bandwidth recorded in the
project_bandwidth_daily_rollups table.
For each day in the month, if the allocated bandwidth is expired, it uses the
settled bandwidth for computing used bandwidth.
Change-Id: Ife723c6d5275338f470619631acb25930d39ac3c
project_bandwidth_daily_rollups table
We want to calculate used bandwidth better so we need to calculate it
from allocated and settled bandwidth. To do this we need first populate
this new table.
https://storjlabs.atlassian.net/browse/PG-56
Change-Id: I308b737bf08ee48ce4e46a3605697ab2095f7257
Rather than applying our internal satellite implementation of coupons
when new accounts are created, use a configured Stripe coupon instead.
If no configuration is set, no coupon will be applied.
This change also removes logic for adding coupons to customers who pay
with crypto - they will already have the free tier coupon applied
anyway.
We will be phasing out our internal coupon implementation.
Change-Id: Ieb87ddb3412acbc74986aa9d18a4cbd93c29861a
The context passed into SendEmail gets canceled before links are clicked
in the test environment. This change passes an un-cancelable context
from SendRenderedAsync so that email sending/link clicking can be
completed even if the parent context is canceled.
Change-Id: I88535d315900d7886877f0e14d1d052745402ac7
Improve UpdateCheckIn on a contended row:
name old time/op new time/op delta
UpdateCheckInContended-100x-32 2.29s ±55% 0.17s ±61% -92.45% (p=0.008 n=5+5)
Change-Id: I053ab9f1cff136c306e5fb57f5e355cdc0269a8c
Piece hash verification failures during repair download are considered
audit failures, but we are not logging these occurrences. Now we log
them.
Change-Id: If456cebcfda6af7a659be3d1fc74448e681fb653
Add test with NotBefore and NotAfter restricted permission to verify that we don't have an access to bucket
Change-Id: I7ec98a5b02c0098ee7ec81034278398f4435f1cf
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Initially metabase was developed separately and it was useful to have a
separate environment flag for tests, however, it's more convenient to
use the same as rest of the testsuite.
Change-Id: Ia4d79be27ce5911cbae68d57cdf0b30f63459444
Currently we were duplicating code for AS OF SYSTEM TIME in several
places. This replaces the code with using a method on
dbutil.Implementation.
As a consequence it's more useful to use a shorter name for
implementation - 'impl' should be sufficiently clear in the context.
Similarly, using AsOfSystemInterval and AsOfSystemTime to distinguish
between the two modes is useful and slightly shorter without causing
confusion.
Change-Id: Idefe55528efa758b6176591017b6572a8d443e3d
So far we were setting ZombieDeletionDeadline alwasy as nil and because of that DB default was never set. This change adds separate query for inserting object if deadline is not set.
Change-Id: I3d6a16570e7c74b5304e13edad8c7adcd021340c
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
The system and database time may drift. We should use database time for
absolute "as of system time" to ensure that it's not newer than the
current database time. When the "as of system time" is in the future,
then the query will fail.
Change-Id: I5423f6aaad966ca03a76b5ff805bfba932e44a51
multiregion satellites have complex database connection strings
largely due to using a different backend for the repair queue than
cockroach.
billing stuff didn't work right with this.
Change-Id: Ie8759a8c47e71347c3a190abfc9d53945d7b8855
Add an auto-generated table of content to the README for easy to find
and browser the documentation of the available API end points.
Change-Id: Id94d904cefd30449234224072ddc50a181aaba04
Currently nodeselection package only contained state for uploads, move
these to a subpackage, such that we can make another "downloadselection"
for downloads. Then move selection logic from overlay to nodeselection.
Change-Id: I0fc42bcae3a29db2728dae9f3863b1e95bf5165b
When audits are being recorded, we automatically add some SQL to remove
the node from the pending audits table in case it exists. They are
removed from pending audits even if the node was offline for the audit.
This is not the correct behavior.
Add statement to record audit results in reverify tests to ensure no
more false positives.
Change-Id: I186ae68bc5e7962ef6c5defbebc1d95e63596a17
We are already adding the free tier coupons at the end of
InvoiceApplyCoupons, but there is a case where we will charge customers
who do not currently have a coupon the next time invoices are generated.
By applying the free tier coupon before preparing invoice project
records, we cover this case.
Once every customer has a coupon, it will be safe to remove this
functionality and only apply new coupons at the end of invoicing.
Change-Id: I65afbe5c0b84e63eeb1a0221e8d95311d87641a0
The DBs of our production satellites have some indexes that we didn't
have in the migrations because at that time we weren't able to add them
because our migration test was not able to deal with Cockroach indexes
with the STORING clause.
We have recently modified the storj.io/private/dbutil/pgutil package to
support the CRDB STRORING clause, so we are adding the missing indexes
to our migrations for being able to have them if we have to recover a DB
from scratch or we deploy a new DB satellite.
Change-Id: I686ff84e5b4c02d9615f50fa531261363affefb8
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
The previously configured never-expiring coupon does not refill every
month. Eventually, even though it never expires, it will run out. This
commit makes several small changes to address this issue for the free
tier:
* Change the config for the promotional coupon to be $1.65 for 1 month
(the change from $10 to $1.65 is due to our recent pricing changes)
* Update PopulatePromotionalCoupons (PPC for brevity) to add promotional
coupons to users with expired and consumed coupons (all users with a
project and no active coupons should get a new coupon when PPC is called)
* Call PPC at the end of the `create-invoice-coupons` stage of invoice
generation - after current coupons are processed and expired/exhausted.
* Remove legacy admin functionality for PPC from satellite/console - we
do not currently use it, but if we did, it should be in satellite/admin
instead.
Change-Id: I77727b97bef972df32ebb23cdc05055827076e2a
Allows us to remove the following files from satellite branding
repo, with an up-to-date single source of truth now in storj/storj:
* web/satellite/src/common/registrationSuccess.html
* web/satellite/src/common/registrationSuccess.scss
* web/satellite/src/views/register/registerArea.html
* web/satellite/src/views/register/registerArea.scss
The registrationSuccess files have been removed from all satellites in
the branding repository. The registerArea files have been removed only
from production satellites in the branding repository.
Importantly, this change enables the "resend email" functionality on
production satellites - previously, this functionality was available in
storj/storj, but not our branding repository.
Removes the config for VerificationPageURL, which redirected users away
from the satellite app to storj.io after creating an account. In order
for the email resend button to work, we cannot leave the app.
Adds a new config value for partner satellites, which replaces the
partner satellite names config. The new config includes name and
address. It is validated on setup/run to ensure it can be parsed.
Change-Id: I67db0702d9b9641f1a37b599f2929d56f3c33aca
For business accounts we need to track the sales contact.
It will be a question to business accounts during onboarding.
Change-Id: I8d101ce1b52091478dfb0ddd875e1cc717d765d3
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
There's a rare chance that `Stop` returns false, however doesn't have
time triggered. Use a non-blocking drain to remove the token.
Change-Id: I1ae18a197424017f0ca76656602709a029b56bfd
WHAT:
whitelist .storjshare.io domain for media-src CSP
WHY:
to enable video preview for linksharing
Change-Id: Ib673602d31ca116e7ce1cee0eba17099a55d7dbc
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
We need some chores to join without triggering the loop.
For example it's fine to run metrics, only when something else is
running.
Change-Id: I9d8bd16f59c28c540c8d72971bc4e233a8660c02
Currently the tool verifies:
* validity of plain_offset
* whether plain_size is smaller than encrypted_size
Change-Id: I9ec4fb5ead3356a196392c26ca377fcdb367138e
When nodes check in for the very first time, if the satellite can't ping
them back, they are inserted into the nodes table with
last_contact_success of '0001-01-01 00:00:00+00'. If the stray nodes
chore runs before the node can fix their problem, they are DQd.
Solution: when DQing stray nodes, dont DQ where last_contact_success =
'0001-01-01 00:00:00+00'::timestamptz
Change-Id: I477a02d5ef85b2c930ed6b7d99a4d1995169bca8
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
The original test caused the testplanet to timeout due to contact
service stuck in a loop. We can change it to only test the failure case for
PingBack method instead of closing the TCP port on storagenodes.
Change-Id: Ic96aee637b39ae95050c6902c2bf9ca51fb586c3
The test function fails randomly in the CI when runs with CRDB. There
isn't currently an explanation why the expectation of number of nodes
which exited 4 minutes ago reports 4 nodes rather than 5 and the only
clue that we have now to see if it gets remedied is to give 2 minutes
rather than 1 to the node that exited close to the time passed function
which makes the test to randomly fail.
Change-Id: I3a731e3eb7f19caebdf29713150727f2cf3e0e0a
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
QUIC
We want to encourage storagenodes to open their udp port. This PR
changes contact service in satellite to try to connect to nodes through
QUIC. If satellite can't reach nodes through quic, it will send an error
message back to nodes. On the nodes side, it will always log out error
message from check in if the error message is not empty.
Whether satellite can reach nodes through quic has no affect on nodes'
uptime check.
Change-Id: I5ebf80f921c4a6504997d83c8bd45226da9d3703
The cursor was not being used in the batch deletion.
The stream ID was not being used while deleting, which could in rare
circumstaces delete a newly uploaded object.
Use the stream id in deletion, rather than passing that information from
one query to another.
Change-Id: I03271c6e72747e345dfb0bb70989f29e835efd8e
Co-authored-by: littleskunk <jens.heimbuerge@googlemail.com>
Co-authored-by: JT Olio <hello@jtolio.com>
Co-authored-by: Igor <38665104+ihaid@users.noreply.github.com>
Check that the bloom filter creation date is earlier than the
metainfo loop system time used for db scanning.
Change-Id: Ib0f47c124f5651deae0fd7e7996abcdcaac98fb4
During metainfo refactor we disabled some validation as it was designed to validate pointer. Now part of this validation is restored. This is first part.
Change-Id: I6132f922fe23d60118bbccfdb77fd93c3c81afed
Currently metrics could trigger metainfo loop on it's own on GC pod,
however running only metrics adds a lot of load, we should only run it
together with other essential chores.
There's no easy way to join that way in metainfo loop, for now, let's
remove it from GC. Satellite Core will still run the metrics.
Change-Id: Ie513a9d2f86add0aa319d08567c6cf3542d73d4e
Document the fields that migrated objects have missing, it's easy to
forget that they might not exist.
Avoid downloading the segment, if we're not sure whether it's the
correct one. We'll later improve the code with an heuristic to get a
best guess, which segment to download.
Change-Id: I12395c17bbf0edf25e0d00c8d072fce6085e303b
If a visitor to the website (run through the reverse proxy) consented to
cookies, read the ID stored in that cookie and send it along with the
Identify/Track calls sent to Segment upon account creation. This allows
us to connect referral information gathered when visitors land on our
website with account activity, helping us improve our onboarding flow.
Change-Id: I0ece717ab5bba67901e50a9b4229c1d4ed7e46b7
We can be more precise and conservative by using the backend
satellite/analytics service. We also no longer need client-side Segment
scripts.
Change-Id: Ic5fb18bea2d388b586ad773e26027d69bde87294
* satellite/analytics: Add analytics for user signed in, project created and access grant created events
Co-authored-by: Moby von Briesen <mobyvb@gmail.com>
We recently added create_at column to segments table.
Old segments needs to get this value from objects table.
This tool will iterate over all objects and update corresponding
segments if create_at column is not set.
Change-Id: Ib5aedc384637e739ee9af84454af0639e2559416
This is a very simple endpoint which allows the satellite UI client to
notify the console server that an event has occurred. We will use this
to track when users have completed certain tasks that can't be tracked
server-side (e.g. generating gateway credentials, setting a passphrase)
As part of this change, one client side event is implemented to use the
endpoint - when the user clicks the button to create gateway credentials
after making a new access grant.
Change-Id: Ic8fa729f1c84474788e1de84c18532aef8e8fa3c
When object doesn't contain segments the implementation would have
returned []*pb.SegmentDownloadResponse{nil} instead of nil.
Change-Id: If38f6d3d9d119f514f63ad1a8762055f657f3004
Add endpoint for getting object information, list segments in a range
and download the first segment in the range.
Change-Id: I056d697ae87c9aa34e7deccba8713902db260457
The new default promotional coupon is $10/month, and doesn't expire.
This change also migrates the coupon.duration column over to the new
coupon.billing_periods, and switches to rely completely on
billing_periods.
Change-Id: Ic3341e9fa4040449bab5e66ca4ee2640b095cf3d
Repair checker expects to have information about CreatedAt and RepairedAt fields to calculate segment age metric.
Change-Id: I6b41df880d77133be541e14d10d91cc75759b339
Currently we can have an error about duplicated entry while inserting into value_attributions table. This change is changing simple insert into insert that is doing nothing on conflict.
Change-Id: I3efd8dc0b63115e8e2ed8f4196ccf969ee942295
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
we want to know a lot more about what's going on during
the operation of the metainfo loop. this patchset adds
more instrumentation to previously unmonitored but
interesting functions, and adds metrics that keep track
of how far through a specific loop we are. it also
adds mon:lock annotations, especially to the metainfo
loop run task, which recently changed, silently broke
some queries, and thus failed to alert us to spiking
run time issues.
Change-Id: I4358e2f2293d8ebe30eef497ba4e423ece929041
instead of only generating invoices for nodes that had some
activity, we generate it for every node so that we can find
and pay terminal nodes that did not meet thresholds before
we recognized them as terminal.
Change-Id: Ibb3433e1b35f1ddcfbe292c034238c9fa1b66c44
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
Previously we would select a limited number of nodes for DQ in a
CTE and run the update on that set in a single transaction. This
could lead to locking on the table, so instead we select and update
in separate transactions.
Change-Id: I1e802c0845e829eeadcee4fa382f58462515fdb1
- add Credit History table to billing acount page and set up ui for a user adding promo codes
- implement promo codes ui in registration form
- add feature flag to handle if coupon code ui should be rendered
Change-Id: I9fdeef7cffc7901958d3f9be335e1115b2471a2e
* Set up basic structure of new service.
* Implement a basic analytics track event for user creation.
Change-Id: Ica8c785540b1ef9d848404af307a22f21d33c6aa
We were using two queries to delete one or more objects and its/their
segments in DeleteObjectExactVersion, DeletePendingObject, DeleteObjectLatestVersion,
DeleteObjectAnyStatusAllVersions,DeleteObjectsAllVersions.
This change delete objects and their segments in one query.
Change-Id: Ib2c0eb501f00b091ee32519e02155350c4dcb8b0
We have a use case for this in ListSegments. ListSegments is going to
return the EncryptedETag along with EncryptedKey and EncryptedKeyNonce.
It also must return the EncryptionParameters.
Since the EncryptionParameters are in the objects DB table, it would be
more efficient for ListSegment to avoid querying that DB table, but take
it from the SatStreamID.
Change-Id: I16c98641c0fe0c98e3303329d0da6ef137ca55cf
Rename the functions that are prefixed with 'New' which connect with
Redis by 'Open' to make clear that they perform network operations.
Change-Id: I1351e89a642e8e2c2586626646315ad0fb2c6242
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
WHAT:
new endpoint to be able to delete apiKey/accessGrant by name and project id
WHY:
it will be called to delete special pregenerated access grant which will be used to generate gateway credentials for file browser component or bucket management
Change-Id: I7467ebaab27a7da33efd062536c6da41e6ed4c30
We are implementing the free tier, which will give all new users 3
projects, 50gb storage, and 50gb bandwidth per project. All users will
receive a recurring coupon to cover this amount of usage.
With the free tier, we no longer need a paywall. Users will not need to
enter a payment method unless they want to increase their project or
usage limits.
Change-Id: If3b026e91858e5f557a2758e366616cecc8f21c7
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
We were deleting expired objects by directly executing a delete query.
With this change, we first select the objects to be deleted and then
delete them (as recommended by cockroachdb for deleting using a non indexed
column).
Change-Id: Ied150fbdc7031a343a74e0b9dab316598188ef66
At some point we might try to change original segment RS values and set Pieces according to the new values. This change adds add NewRedundancy parameter for UpdateSegmentPieces method to give ability to do that. As a part of change NewPieces are validated against NewRedundancy.
Change-Id: I8ea531c9060b5cd283d3bf4f6e4c320099dd5576
The coupon_codes table will allow for administrators to create new promo
codes associated with coupon information (amount, duration, etc...).
A user will be able to enter a promo code (aka coupon code) in order to
apply a new coupon to their account. The coupon in the coupons table is
linked to the template defined in the coupon_codes table.
Change-Id: I50e49fa92afbc6aa9d01d8a895c069efb59e472b
WHAT:
enter passphrase step for users who has already created passphrase
WHY:
to let users proceed to upload step
Change-Id: I084aec5b863981978cf190f99ee95154fbed9aab
Among other conditions, nodes fail audits by returning incorrect
data and by reaching the max reverify count, but we weren't logging
these events. This commit adds the missing logs.
Change-Id: I80749a7e95e8cb97bc8dd7dac1e523e223114b7f
Update the Redis dependency to use the last major production version.
The last version accepts a context parameter in all the network methods
so it allows us to pass it through them.
Change-Id: I34121b2ec3c2728602115c724933ad24c9e6e4fd
WHAT:
beta satellite top banner's copy is changed to include support/feedback URLs
WHY:
so users using our beta satellite will be able to report feedback somewhere
Change-Id: Ibc349c8b3354b577275fcf1d2b75bfdd267729d9
At the moment we are trying to optimize deletion queries but its hard to verify deletion performance. Until we are sure that the queries are good we will just log errors instead shutting down whole satellite core.
Change-Id: I5625251d4518c35f0d46d6bf37b2f3ea7950675e
If a non-nil value is read from created_at column of the segments table,
it will be set to the CreatedAt field if SegmentListItem.
Change-Id: I02691d8e11fad12c1b0e4c443bdebb568016ffe3
The created_at columns is first added without a default value to avoid
setting the current time to existing segments.
Change-Id: Ic2fe3da238422e2949e6f3016fbac04eb89ba037
Migration step 148 will cause errors because we missed some
references to the columns being dropped. Removing the step
altogether causes problems with backwards compatibility tests
because the change already exists in the latest release tag.
To circumvent, we change v148 to an empty migration.
Add methods FindTable and RemoveColumn in private/dbutil/dbschema
Change-Id: Ia527e95b88a88c5dc82800928ce6f8cfb879e334
Move a specific interface & types used for testing to be a private
subpackage with a name that clearly identifies it for testing purpose.
Change-Id: I646cf3b6f0a3b518a6f9a125998dc5a02df02db6
ListSegments loads all the segment data into memory, however this can
add up to a lot of data with inline segments and large objects.
Change-Id: I037738f0e70b810ecbea7d83b00ea7ca9eb90c7a
IterateDatabase method was used by zombie segment reaper which is removed for multipart implementation.
Change-Id: I93e1294236612d6d82b2ab57053bb84e653f72b4
