The current satellitedb.dbx has grown quite big over time.
Split the single file into multiple smaller ones.
Change-Id: I8d6ca851b834ac60820aff565906f04aab661875
Update get usage-limits, daily-usage and salt endpoints to support
both project-ID and project-PublicID.
Issue: https://github.com/storj/storj/issues/5411
Change-Id: Iff0114a295d1a479b141bfffbfb31599844d1fc0
Update the delete API key by name and projectID to support project-ID
and project-publicID.
Issue: https://github.com/storj/storj/issues/5410
Change-Id: I3bd11b9c3ae1ad6ce662dfc18b42779d2e4edf9b
Add an observer to monitor ranged segment loop progress.
Tested by running the segment loop in storj-up and navigating to
http://<container>:11111/mon/stats and there is the entry:
rangedloop-live,scope=storj.io/storj/satellite/metabase/rangedloop numSegments=364523630000.000000
part of https://github.com/storj/storj/issues/5223
Change-Id: If3d2774d2f17f51eac86f47c6dda1fb8ad696dfe
Removing all references to column last_verification_reminder which is to be removed, due to new column verification_reminders
Issue: https://github.com/storj/storj/issues/4560
Change-Id: I7c9a426e946c7aed58e62c1eef80629daf6b1272
Support interruption of the ranged segment loop through context.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
Add public ID field to graphql Project so it can be used on the front
end. Additionally public_id needed to be added to the ListByOwnerID sql
query which is called by graphql OwnedProjectsQuery.
github issue: https://github.com/storj/storj/issues/5408
Change-Id: I2ec04363c20493dc0f9c70b6d1610f724f18ec2f
Wire up duration measurement of observers with monkit.
Tested by attaching a SleepObserver, starting the rangedloop in storj-up
and navigating to http://<container>:11111/mon/stats. It reports the
following statistic:
completed-observer-duration,observer=*rangedlooptest.SleepObserver,scope=storj.io/storj/satellite/metabase/rangedloop duration=10.000117
Change-Id: Ief131d34001dd5d3ba1d7be6f161986e1f66440d
Before we introduced objects versions internally move operation was
always failing when under target location object exists. But then we
had only single version 1 all the time. With versions different than 1
we need to check all existing objects under target location.
To be backward compatible with our API new logic looks like this:
* if there is no object under target location use source object version
as target version
* if there are only pending objects find first free (highest) version
which could be used to move object there
* if there is committed object under target location reject move
operation
Fixes https://github.com/storj/storj/issues/5403
Change-Id: I717f3e7c42470b406287d6ec335f6f057d3fc3b5
This change implements the ranged loop observer to replace the audit
chore that builds the audit queue.
The strategy employed by this change is to use a collector for each
segment range to build separate per-node segment reservoirs that are
then merge them during the join step.
In previous observer migrations, there were only a handful of tests so
the strategy was to duplicate them. In this package, there are dozens
of tests that utilize the chore. To reduce code churn and maintenance
burden until the chore is removed, this change introduces a helper that
runs tests under both the chore and observer, providing a pair of
functions that can be used to pause or run the queueing function.
https://github.com/storj/storj/issues/5232
Change-Id: I8bb4b4e55cf98b1aac9f26307e3a9a355cb3f506
add triggerAttemptPaymentIfFrozen to check if the account is frozen
and if frozen, will trigger an attempt to pay outstanding invoices
Issue: https://github.com/storj/storj/issues/5398
Change-Id: I0da6a982e2da4204dee219d98ce2d503cbbb6f8e
The tests are forked from the chore tests with slight adaptations for
being run against the ranged loop. I also moved a benchmark for the
database from chore_test.go to db_test.go.
The pathcollector is reused as a rangedloop.Partial.
https://github.com/storj/storj/issues/5234
Change-Id: I56182031d133812a9f4d4a433c01b9150af39f31
Track duration of all segment loop observers. Factor out functions to
reduce size.
Still need to send the measurements out via monkit.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Iae0260e250f8ea33affed95c6592a1f42df384eb
This modifies the userinfo endpoint to return appropriate errors;
PermissionDenied for untrusted peers and Unimplemented because
the endpoint isn't implemented
Change-Id: I5109bb204b5e1ce2e21fe16b003991b6c900a8ce
Implemented interception for http requests.
We redirect user to login page on every 401 response.
Issue:
https://github.com/storj/storj/issues/5339
Change-Id: Icba4fc0031cb2b4e682a1be078cdcf95b7fa6bfe
This change stubs userinfo endpoint from storj/common/pb/userinfo.proto.
It also adds config for allowed peers, and a method for verifying peers.
Issue: https://github.com/storj/storj/issues/5358
Change-Id: I057a0e873a9e9b3b9ad0bba69305f0d708bd9b9e
This change adds an account freeze service with methods for checking
if a user is frozen, freezing a user, and unfreezing a user.
Furthermore, methods for altering the usage limits of a user or project
have been implemented for use by the account freeze service.
Change-Id: I77fecfac5c152f134bec90165acfe4f1dea957e7
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
This change updates the stripecoinpayments service to optionally skip
generating line items for payments records that have no egress, storage,
or segments for the billing period.
This results in a reduction from 4 to 1 Stripe API calls for customers
who have no usage. The final API call is the attempt to generate an
invoice on stripe, which expectedly fails because there are no unapplied line
items. Removing that final API call would require some additional
queries and is out of scope for this change.
This functionality is behind the
`payments.stripe-coin-payments.skip-empty-invoices` feature flag.
https://github.com/storj/storj/issues/5381
Change-Id: Id184969a4c79047c40502336d69c51388ab03bf8
Now that we are doing scalable piecewise reverifications, the code for
handling the old way of doing things (containment, pending audits,
reporting, testing) can now be removed.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ief1a75f423eff682e8f3d57804e343b3409a6631
This commit pulls the big switch! We have been setting up piecewise
reverifications (the workers for which can be scaled independently of
the core) for several commits now, and this commit actually begins
making use of them.
The core of this commit is fairly small, but it requires changing the
semantics in all the tests that relate to reverifications, so it ends up
being a large change. The changes to the tests are mostly mechanical and
repetitive, though, so reviewers needn't worry much.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ibb421cc021664fd6e0096ffdf5b402a69b2d6f18
This change implements DB methods for interacting with the
account_freeze_event table and introduces structures related to
account freeze events.
Change-Id: Ib125b31dfb754b2428212c39b780e14cfc7f97bf
This change fixes the access of unset segments and keys on the reservoir
when the reservoir size is less than the max OR the number of sampled
segments is smaller than the reservoir size. It does so by tucking away
the segments and keys behind methods that return properly sized slices
into the segments/keys arrays.
It also fixes a bug in the housekeeping for the internal index variable
that holds onto how many items in the array have been populated. As part
of this fix, it changes the type of index to int8, which reduces the
size of the reservoir struct by 8 bytes.
The tests have been updated to provide better coverage for this case.
Change-Id: I3ceb17b692fe456fc4c1ca5d67d35c96aeb0a169
Adding this entry means that the database accessed as "reverifyqueue"
(`(*satelliteDBCollection).ReverifyQueue()`) can be located on a
different database host from the other databases, and things should
still work. There aren't any queries that do a JOIN on tables from
reverifyQueue and other things in satellitedb, for example.
This should really have been put here earlier, when reverifyqueue was
first added, but it's ok. This won't have any bearing on things until we
need to deploy to prod.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I76f68de79cd645c869f3dbfbe3b2c9c4f9359e8f
This method on the Verifier allows the caller to find, out of the nodes
holding pieces in a given segment, which ones are contained.
This method is not yet being used. It will be in a future commit.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I242cd999913ca4dabbe8a62767ed4869b31fca04
Implemented UI error tracking.
We use satellite analytics service to track the fact that UI error occurred and send minimal info to Segment (not Hubspot).
We send only the fact that UI error occurred and the place where this error occurred.
Extended notificator plugin error function to include the place where error occurred.
I made the place argument nullable to be always explicitly provided (build fails if place is not provided).
If place is not null then error event is triggered in the background.
Issue:
https://github.com/storj/storj-private/issues/107
Change-Id: I7d129fb29629979f5be6ff5dea37ad19b1a2397e
update the updateProject function to set user specified bandwidth and storage limits
fixes https://github.com/storj/storj/issues/5185
Change-Id: Ib4132487f6b7ea0afa7c57acfc358857b3e852d1
We missed proper handling of object copies for method
GetStreamPieceCountByNodeID which is used by metabase.GetObjectIPs.
That caused some lack of IPs returned when queriyng IPs of copy and
broke things like pices map on linksharing.
Fixes https://github.com/storj/storj/issues/5406
Change-Id: I9574776f34880788c2dc9ff78a6ae20d44fe628f
Here we add a worker class comparable to audit.Worker, which will be
responsible for pulling items off of the reverification queue and
calling reverifier.ReverifyPiece on them.
Note that piecewise reverification audits (which this will control) are
not yet being done. That is, nothing is being added to the
reverification queue at this point.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I94e28830e27caa49f2c8bd4a2336533e187ab69c
The Reporter is responsible for processing results from auditing
operations, logging the results, disqualifying nodes that reached
the maximum reverification count, and passing the results on to
the reputation system.
In this commit, we extend the Reporter so that it knows how to process
the results of piecewise reverification audits.
We also change most reporter-related tests so that reverifications
happen as piecewise reverification audits, exercising the new code.
Note that piecewise reverification audits are not yet being done outside
of tests. In a later commit, we will switch from doing segmentwise
reverifications to piecewise reverifications, as part of the
audit-scaling effort.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I9438164ce1ea4d9a1790d18d0e1046a8eb04d8e9
While researching logs from a large set of audits, I noticed that nearly
all of them had streamIDs starting with 0 or 1. This seemed very odd,
because streamIDs are supposed to be pretty much entirely random, and
every hex digit from 0-f should have been represented with roughly equal
frequency.
It turned out that our A-Chao implementation of reservoir sampling is
flawed. As far as we can tell, so is the Wikipedia implementation. No
one has yet reviewed the original 1982 paper by Dr. Chao in enough
detail to know where the error originated, but we do know that we have
been auditing segments near the beginning of the segment loop (low
streamIDs) far more often than segments near the end of the segment loop
(high streamIDs).
This change uses an algorithm Wikipedia calls "A-Res" instead, and adds
a test to check for that sort of bias creeping back in somehow. A-Res
will be slightly slower than A-Chao, because of a few extra steps that
need to be done, but it does appear to be selecting items uniformly.
Change-Id: I45eba4c522bafc729cebe2aab6f3fe65cd6336be
Some observers assume that they will observe all the segments for a
given stream, and that they will observe those segments in a sequential
stream over one or more iterations.
This change updates the range provider from rangedlooptest to provide
these guarantees.
The change also removes the Mock suffix from the provider/splitter types
since the package name (rangedlooptest) implies that the type is a test
double.
Change-Id: I927c409807e305787abcde57427baac22f663eaa
We have a bug in our behavior while doing API pods deployment. At this
time its possible to have pods with multiple versions flag set true only
partially for some of pods. Because of that it's possible to start new
object without removing existing/older version on BeginObject
(new behavior) and also don't remove that existing/older object on
CommitObject. That can cause to have two committed objects with
different versions and that's a state we want to avoid.
To fix it we are removing multiple versions flag from CommitObject to
always try delete existing objects. This way even if we don't remove
existing object on BeginObject it will be always removed while
committing.
Fixes https://github.com/storj/storj/issues/5373
Change-Id: Idc334bf5cc785d2f559af96e92c3de6d82ca58ba
Add an abstraction rangedloop.SegmentProvider to fetch chunks of
segments from the metainfo database in parallel.
Part of https://github.com/storj/storj/issues/5223
Change-Id: Ife26467ea0c3be550bde0b05464ef1db62dd4d2a
Adds DeleteAllSessionsByUserIDExcept which removes all sessions except the specified session from the database and applies this function to enableMFA and disableMFA
addresses https://github.com/storj/storj-private/issues/15
Change-Id: I5d8c620dadbbda4a1b430ccf8a6121e167dd0761
Minimal implementation of the ranged (=threaded) segment loop
service, to improve performance over the existing loop.
Has tests with a an inmemory segment database
and example observer.
Does not have yet: database link, observer duration tracking,
suspicious processed ratio guard, rate limiting, minimum execution
interval per observer, etc.
Part of https://github.com/storj/storj/issues/5223
Change-Id: I08ffb392c3539e380f4e7b4f1afd56c4c394668d
This change shows STORJ token balance on the billing overview page instead of the Stripe balance it shows currently.
It changes the text on the "Available balance" card to reflect the new balance being displayed. Finally, it adds shortcuts to navigate straight to token history or add tokens modal when call to action on "Balance card"
Issue: https://github.com/storj/storj/issues/5204
Change-Id: Ic88e43c602e4949b6c6be4c7644c04f3c7d38585
To be able to verify segments in a list of buckets, this change:
- adds method ListBucketsStreamIDs to list all stream ids belonging to a list of buckets provided using a ListVerifyBucketList on which Add(projectID, bucketName) is defined.
- allows to specify a list of streamIDs to check in ListVerifySegments
Fixes https://github.com/storj/storj-private/issues/101
Change-Id: I72a48a0873a3056ac54ad56c0e9242364b2ae918
First, adding a logger argument allows the caller to have a logger
already set up with whatever extra fields they want here.
Secondly, we need to return the Outcome instead of a simple boolean so
that it can be passed on to the Reporter later (need to make the right
decision on increasing reputation vs decreasing it).
Thirdly, we collect the cached reputation information from the overlay
when creating the Orders, and return it from ReverifyPiece. This will
allow the Reporter to determine what reputation-status fields need to be
updated, similarly to how we include a map of ReputationStatus objects
in an audit.Report.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I5700b9ce543d18b857b81e684323b2d21c498cd8
NewContainment will replace Containment later in this commit chain, but
for now it is not yet being used.
NewContainment will allow a node to be contained for multiple pending
reverify jobs at a time. It is implemented by way of the reverify queue.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I126eda0b3dfc4710a88fe4a5f41780618ec19101
We have a bug where if number of buckets in the system will be
multiplication of batch size (2500) then loop that is going over
all buckets can run indefinitely.
Fixes https://github.com/storj/storj/issues/5374
Change-Id: Idd4d97c638db83e46528acb9abf223c98ad46223
Simple email validation before attempting to send notifications. If the
email is not valid, skip sending notifications and go to update
email_sent so we don't try it again. Also, move ValidateEmail function
into new package so it can be used in nodeevents without import cycle.
Change-Id: I63ce0fc84f7b1d964f7cc6da61206f54baaf1a21
It helps for the (*reverifyQueue).Insert() method to be idempotent (it
does not make sense for the same node to be under containment for the
same piece multiple times). This change allows for that, by adding an
`ON CONFLICT DO NOTHING` clause to the database query.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: Id2839ee185d5396c0bc2f84ffad610df9786f6c7
Adding a new worker comparable to Verifier, called Reverifier; as the
name suggests, it will be used for reverifications, whereas Verifier
will be used for verifications.
This allows distinct logging from the two classes, plus we can add some
configuration that is specific to the Reverifier.
There is a slight modification to GetNextJob that goes along with this.
This should have no impact on operational concerns.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: Ie60d2d833bc5db8660bb463dd93c764bb40fc49c
Previously, the node events chore would select based on the earliest
created_at. However, if for some reason this batch fails, it would still
be the next item to select. If there is a consistent error, the chore
would be stuck retrying the same batch over and over. Now instead
GetNextBatch orders by `last_attempted NULLS FIRST ASC, created_at ASC`.
If a batch fails during Notify, last_attempted is updated so we can move
on to a new batch if one exists.
Change-Id: Ia8458e05ac358d85b2f2c6d690f3d607d631be61
audit.Queues was the previous method of passing stacks of segments for
audit to the verifier. As of commit 68f9ce4a, this is now happening
by way of the auditor queue (database-backed, so that communication can
happen between multiple peers). audit.Queues is no longer needed.
Refs: https://github.com/storj/storj/issues/5228
Change-Id: I46f2d48d655fb66366c92146cdb6b85aef200552
SetNodeContained() will change the contained flag in the nodes table,
which will affect whether nodes are selected for new uploads. This flag
_should_ correlate with whether or not a given node has any entries in
the reverification queue. However, the reverification queue is intended
to be 'safely partitionable' from the nodes table, so we can't enforce
that characteristic transactionally. But this is ok; there are no dire
consequences if they are out of sync.
We will be adding a chore that updates the contained flag based on the
contents of the reverification queue periodically, if something fails
to set it directly when appropriate.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I26460d8718dee63fd55d00a44568b2065fc8fe30
GetByNodeID will allow querying the reverification queue to see if there
are any pending jobs for a given node ID. And thus, to see if that node
ID should be contained or not.
Some parameters on the other methods of the ReverifyQueue interface have
been changed to accept pointers; this was done ahead of the rest of the
changes for the reverification queue to better match the signatures of
the methods that these will replace once ReverifyQueue is actually being
used (meaning fewer changes to tests).
Refs: https://github.com/storj/storj/issues/5251
Change-Id: Ic38ce6d2c650702b69f1c7244a224f00a34893a1
This change removes the error type that is returned when a token
request contains an incorrect password. Instead, the generic error
type for invalid login credentials is used.
Change-Id: Ia7dbc38f4a08aeaeeac7ff5b5a801233e349b8b3
This change reduces the token links expiry time from 24h to 30m and improves the UI to promt users of the expiration.
see: https://github.com/storj/storj-private/issues/17
Change-Id: Iac00f5740fa84069937fdf9bd30a739b6db2a9e0
The audit chore will be pushing a large number of segments to be
audited, and the db might choke on that large insert when under load.
This change divides the insert up into batches, which can be sized
however is optimal for the backing database. It also arranges for
segments to be inserted in the order of the primary key, which helps
performance on some systems.
Refs: https://github.com/storj/storj/issues/5228
Change-Id: I941f580f690d681b80c86faf4abca2995e37135d
* storj/common
* storj/private
Latests common version requires small refactoring for names and types
used by metainfo code.
Change-Id: I224fe93b4751c996ba6e846be0e5677252cf830f
Reputation updates during repair currently consumes a lot of database
resources. Sometimes increasing the rate of repair is more important
than auditing a node based on whether they have or don't have the
correct piece during repair. This is the job of the audit service.
This commit is to implement an intermediate solution from this issue: https://github.com/storj/storj/issues/5089
This commit does not address the more in-depth fix discussed here: https://github.com/storj/storj/issues/4939
Change-Id: I4163b18d78a96fadf5265789fd73c8aa8def0e9f
This change causes rate limiting errors to be returned to the client
as JSON objects rather than plain text to prevent the satellite UI from
encountering issues when trying to parse them.
Resolvesstorj/customer-issues#88
Change-Id: I11abd19068927a22f1c28d18fc99e7dad8461834
We tested new upload flow (with multiple versions) to fix inconsistency
while uploading object on QA/EUN1/SLC. Now we would like to enable it
for all satellites by default. Tests required small adjustments.
Fixes https://github.com/storj/storj/issues/5283
Change-Id: I0d53c041abebc0d182ba5a88bb1dac906c29caf0
As part of the effort of splitting out the auditor workers to their own
process, we are transitioning the communication between the auditor
chore and the verification workers to a queue implemented in the
database, rather than the sequence of in-memory queues we used to use.
This logical database is safely partitionable from the rest of
satelliteDB.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I6cd31ac5265423271fbafe6127a86172c5cb53dc
We added alternative way to calculate bucket tallies for accounting and
now it's tested and we will enable it by default.
CollectBucketTallies was extended to support overriding current time
to be able to test handling expired objects.
Change-Id: I738b99a33fd2e086245f92d874c1cbb806e834c0
Add a new chore to periodically insert nodes who are offline and
have not gotten an offline email in a certain amount of time into node
events
Change-Id: I658b385bb777b0240c98092946a93d65bee94abc
Create NodeEvents Chore on satellite core to read nodeevents DB and
notify node operators on node events. The chore sends notifications
grouped by email and event type: it selects the oldest entry in
nodeevents.DB and also any other event with the same email and event
type no matter how old it is. The oldest entry of a group must exist for
a minimum amount of time before that group can be selected, however.
This minimum amount of time is a configurable value:
--node-events.selection-wait-period. This wait period allows us to
combine events of the same time and same email address into a singular
email.
Change-Id: I8b444aa324d2dae265cc27d9e9e85faef79195d8
read one is the wrong method when trying to select one row when there
are multiple. It returns TooManyRows error. Read first is the correct
method.
Change-Id: Ic6c92795486892ac041befd118b6945314bffeaa
Add LastOfflineEmail to overlay.NodeDossier. This is the last time a
node got an offline email. Add two new overlay db methods,
GetOfflineNodesForEmail and UpdateLastOfflineEmail. Edit db method
UpdateCheckIn to nullify last_offline_email if node is up.
Change-Id: I1ee60e7d98dd1b68348a57f9a4fb77c6c9895d6d
We have code that is used only by old uplinks and can fail at some point
but we don't interrupt anything and only log message about failure.
Until now it was logged as error but it's nothing critial so we can
reduce it to warning.
As an addition log entry was extended with more information about client
that is using this backward compatibility code.
Change-Id: Ie21c673ee59eb10de065cc371132f8f9505e2220
This change causes the session inactivity timer to be enabled unless
expressly specified otherwise.
Change-Id: I85b4014394afac2feb21f383cac414cddb09ca8f
Added new feature flag.
Reworked vuex logic to work properly with project level passphrase.
Implemented new simple set project level passphrase modal.
Issue:
https://github.com/storj/storj/issues/5280
Change-Id: I6a15e90ee9fa7aa8a09c67022466787090120f9c
Currently the primary key of the underlying rollup table has the
primary key being the bucket name, but we used to sort by projectID.
This caused dead locks due to the contention during updates/inserts.
We should reevalute if bucket name being the primary key is the right
way for this table, this should stop the long running and failing attempts tho.
Change-Id: Ie7d0f86944da48ad9cbd92eb162226882a2fb954
This change modifies the method responsible for returning project
usage summaries such that the end date of the given time period
is excluded to prevent overlap.
Change-Id: If06155efff5c6fce3865f5f6e4344873abe3e432
When a node checks in and its version is below the minimum, insert
BelowMinVersion event into node events
Change-Id: I0e437ac34496778369515cbc40c15676da8b27ae
Multipart upload requires to have the same UploadID returned from
different requests (BeginUpload, ListUploads). Otherwise client won't
be able to find existing uploads. Main issue was that data needed to
construct UploadID is in System metadata which can be filtered out
by listing option.
This change is fixing how we are setting Status for listed objects and
it's forcing reading System metadata if we are reading pending objects.
Fixes https://github.com/storj/storj/issues/5298
Change-Id: I8dd5fbab4421a64dc3ed95556408ead4c829f276
Upon adding members to a project using the Add Team Member modal,
users are now notified that only email addresses belonging to an
account will receive a project invitation. This notification appears
regardless of whether every submitted email corresponds to an account.
Previously, users received an error message if any email address not
attached to an account was submitted.
Change-Id: Ia014c8311c1347e001b1c6c33de73ea61f20b0cb
We want to be able to exclude contained nodes from nodes selection. For this, we add a 'contained' column to the nodes table to track the containment status.
Fixes https://github.com/storj/storj/issues/5231
Change-Id: Id78e645f172145adcb8664646e8ebf14e218b57b
Since the auditor will be moving to a different process from the
metainfo loop, we need a way of communicating which segments have
been chosen for audit. This queue will be that communication, for now.
Contrast this with the queue for _re_verifications in commit 9c67f62f.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I9a269c7ef21e6c5e9c6e5e1f3db298fe159a8a79
Hubspot is migrating from using API keys for authentication to OAuth.
This change migrates our Hubspot integration to use OAuth tokens.
It modifies the EnqueueCreateUser code to not send empty HubspotUTK to hubspot, and to return error for failed requests.
see: https://developers.hubspot.com/changelog/upcoming-api-key-sunset
Change-Id: I422f00e3e3caeff3ff3d08ddec059502b9addaee
* Mark node events table as "safely partitionable", meaning that it
is/will not be queried relationally along with other tables. This way,
we can safely use this table in Postgres rather than CockroachDB,
where most of our other satellite tables are running.
* Add a dbx-generated delete function to the node events table, to allow
us to easily delete entries created before a provided time. This
allows us to keep the table clean, since there is no need to persist
entries after emails have been sent.
Change-Id: I25e8a5c4092fe49dcfa6c8bb73f2043646bb611f
Libuplink is using some aliases to storj package which we will
move directly to libuplink and remove from common/storj.
To make code compilable we need to fix places where we
are using aliased types directly to be able to update libuplink.
Change-Id: I7222a927af3b41e214d1c9204917f3ebce4727ce
GetObject and GetObjectIPs are invoked by the Linksharing service to
display the shared object and its map. These two endpoint currently
require read permission.
There is a use case where an object can be shared with an access grant
that has only list permission. In such a case, the expectation is that
the linksharing service would still display the metadata of the shared
object (name, size, map), but the content would be still inaccessible.
See https://github.com/storj/gateway-mt/issues/209 for details.
This change allows GetObject and GetObjectIPs to require either read or
list permission to support the described use case.
Change-Id: I3477edc7bf8990e9848482890da047094c875d09
When a customer has no pending line items, an invoice will not be
generated for them and the Stripe client method responsible for
creating new invoices returns nil. This change adds a nil check to
account for this possibility to ensure that no panics are caused
by attempted processing of the invoice.
Change-Id: Id184d027d7447f0ef876db58601ab6cf63927fc5
Some changes to make code cleaner and easier to adopt to new ranged
loop.
* removed unneeded mutex
* reorganize constructor args
* avoid creating the same redundancy scheme for each segment piece
Change-Id: I81f3f6597147fc515516949db3ce796a60b1c8a0
Pair uuid's to create ranges. Will be used to parallelize the segment
loop.
Part of https://github.com/storj/storj/issues/5223
Change-Id: I73e2fb8a2cd379b840864449b6251b48feeb7b66
Instead of sending emails at the time the node is seen to be back
online, we have decided to send the event to the node events table,
which will initiate the email sending process at some point.
Change-Id: Id756209498112579de8e78ee20ad2df54571a617
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
New flag 'MultipleVersions' was not correctly passed from metainfo
configuration to metabase configuration. Because configuration was
set correctly for unit tests we didn't catch it and issue was found
while testing on QA satellite.
This change reduce number of places where new metabase flags needs
to be propagated from metainfo configuration to avoid problems with
setting new flags in the future.
Fixes https://github.com/storj/storj/issues/5274
Change-Id: I74bc122649febefd87f665be2fba628f6bfd9044
since amount of objects is growing and looping through all of them
starts taking lot of time, we are switching for SQL query to do it
in chunks of tallies per bucket. 2nd part of issue fix.
Closes https://github.com/storj/team-metainfo/issues/125
Change-Id: Ia26bcac0a7e2c6503df9ebbf4817a636841d3284
Change he bloomfilter generation process to prefix the objects with a date and update the LATEST object with the prefix. The sender will read the LATEST file to get the prefix to process.
Change-Id: Iae0d3c49015d57f391d87789fb799a7d774066bf
The current deployment strategy requires that the GC bloomfilter generation process executes only once and exits.
Change-Id: I952991f126596aa165d1f2e9fce6f8548c21bdba
Implement node events DB with Insert and GetLatestByEmailAndEvent. Get
was changed to GetLatestByEmailAndEvent so we can verify items are being
inserted into the table without needing the ID, which is not available
to us in the tests.
Change-Id: I4abe63631c44774cd7e795fbab0cbab4d801db4c
Change node_events schema to use an id column as primary key rather than
node id because there can be multiple events per node id.
Change-Id: I518d8ef9ea658764876483e282a4058d3c4910f4
Add new table for node events. We can use this to notify node
operators of certain node events. Further, we can squash events for
multiple nodes with the same email into a single notification.
Change-Id: Icea6dd939df8fe4a98806bd79c014e21d239c43e
ReverifyPiece() is not currently hooked up to anything, but is planned
to take the place of audit.(*Verifier).Reverify().
ReverifyPiece() works by downloading one piece in its entirety, rather
than pulling an entire stripe across many nodes.
Change-Id: Ie2c680f4d3c3b65273a72466a3f9f55c115b0311
This table will be used as a queue for pieces that need to be reverified
(a regular audit timed out on the owning node, so now that node is
contained and we need to validate the piece before un-containing it).
Refs: https://github.com/storj/storj/issues/5228
Change-Id: I5dcd26b6adced8674cbd81884c1543a61ea9d4c8
BeginCopyObject checks twice for write permission in the destination
bucket. One check should be enough.
Change-Id: I3d5935d34f69cd48eaaf00d0117683edfdcefc05
The procedure responsible for node reputation status comparison could
return an invalid result due to comparing a status timestamp against
itself rather than comparing it against another. This results in
unnecessary database updates that could be avoided otherwise.
This change modifies the procedure to resolve this issue.
Change-Id: Id147e1942e994e8bca4ced2a9358f2474927d6ec
We had multiple experiment so far to collect high cardinality data (mainly in aggregated form).
1. we have a `/top` endpoint which aggregates events with upper bound
2. we use same api (eventstat) to publish S3 gateway-mt agents to influxdb
This patch starts to replace theses api with jtolio/eventkit. Instead of aggregation all events can be sent to a collector host where we can do aggregation and/or persisting data.
Change-Id: Id6df4882b51d2dbd2be9401ee4199d14f3ff7186
The threshold of piece deletions from the nodes during CommitObject
when overriding an existing object seemed to cause a race condition in
tests.
This change makes the threshold configurable so we can set it to maximum
so CommitObject waits until all pieces are removed from the nodes in the
test.
Change-Id: Idf6b52e71d0082a1cd87ad99a2edded6892d02a8
We removed monkit call from "object" method because it was using
too much cpu and was visible on cpu profile but we should first try
optimized version of this call.
Change-Id: Ib76d8a2968a704ce47235c6dac6edad4e40bde48
One of two parts to stop using objects loop for bucket accounting,
this method collects bucket tallies from list of bucket locations
part1 of: https://github.com/storj/team-metainfo/issues/125
Change-Id: Id2d492582453e28463cddf1245622fb7f191050c
We want to send emails to SNOs. Node status changes go through the
overlay service, so it's a good place to add the mail service.
Add the mailservice.Service, satellite address, and satellite name to
overlay service. Also add feature flag --overlay.send-node-emails
Change-Id: I3bd2cb3bf22f9724954ce2374f8b651b902b3a24
Add getSalt to projects api. Add action, GET_SALT, on Store
Projects module to make the api request and return the salt
string everywhere in the web app that generates an access grant.
The Wasm code which is used to create the access grant has been
changed to decode the salt as a base64 encoded string. The names
of the function calls in the changed Wasm code have also been
changed to ensure that access grant creation fails if JS access
grant worker code and Wasm code are not the same version.
https://github.com/storj/storj-private/issues/64
Change-Id: Ia2bc4cbadad84b066ca1882b042a3f0bb13c783a
We have new flow where existing object is deleted not on begin
object but on commit object. Deletion on commit object is still
missing deletion from storage nodes. This change adds this part
to the code.
Fixes https://github.com/storj/storj/issues/5222
Change-Id: Ibfd34665b2a055ec6c0d6e260c1a57e8a4c62b0e
We have a code to limit segments loop in case it will hit DB to hard
but so far we didn't use this loop feature in production. This is a
simple change to avoid logic responsible for rate limiting and its
monitoring if limiting is disabled (RateLimit = 0)
Change-Id: I43e07b407c6e65cf252303159d052eef250d1bea
Until this change we were stripping prefix from object key on satellite side. Because of that we were transferring over network unnecessary data
from DB. This change adjusts iterator SQL queries to use SUBSTRING to
remove prefix on DB side and avoid sending it to satellite.
Benchmark against 'main':
unfortunately "time/op" is very unstable while doing local bench in this
case and sometimes there is no difference in time and sometimes its up to 18%. I never saw results when old solution is faster then new one. Results for "alloc/op" and "allocs/op" are rather consistent.
name old time/op new time/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 1.98ms ± 6% 2.05ms ±23% ~ (p=1.000 n=9+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 3.97ms ± 8% 3.42ms ±20% -13.86% (p=0.005 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 8.42ms ±16% 7.58ms ± 5% -9.91% (p=0.002 n=10+10)
name old alloc/op new alloc/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 16.7kB ± 0% 16.9kB ± 0% +1.16% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 27.3kB ± 0% 28.2kB ± 0% +3.31% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 60.0kB ± 0% 62.4kB ± 0% +3.93% (p=0.000 n=10+8)
name old allocs/op new allocs/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 312 ± 0% 315 ± 0% +0.96% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 526 ± 0% 541 ± 0% +2.85% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 1.16k ± 0% 1.23k ± 0% +5.24% (p=0.000 n=10+10)
Change-Id: I23e501494ededafb2dd5ea903e8e4e313b42e956
This change increments users' failed_login_count in the database layer to avoid potential data race.
It also updates the login_lockout_expiration as well in one operation.
see: https://github.com/storj/storj/issues/4986
Change-Id: I74624f1bee31667b269cb205d74d16e79daabcb6
With this change we are switching methods to begin object, from
BeginObjectExactVersion to BeginObjectNextVersion. Main implication
is that from now it will be possible to have object with version
different than 1. New object will always get first available version.
Main reason to do this it to avoid deleting existing object during
reuploading object. Now we can create multiple pending objects but
only last committed will be available to the user. Any previous
committed object will be deleted.Because of that we moved logic to
delete existing object from BeginObject to CommitoObject request.
New logic is behind feature flat to be able to test it well first
before enablng on production.
Fixes https://github.com/storj/storj/issues/4871
Change-Id: I2dd9c7364fd93796a05ef607bda9c39a741e6a89
The flags weren't properly loading from config.
The code assumed that every node that's online for downloading also have
data uploaded to them -- which is not true.
Change-Id: Ifd65a47b9eca5b4841231928244fab17acbde6fb
This is another change to remove monkit calls from fast methods. Those
calls are visible in CPU profiles.
Change-Id: Ib3beba0dca6a6d93c3342b0994c580f78bbdd50b
After you create a brand new cluster (with storj-up, for example) the project usage fails during the first 5 minutes.
The problem is the usage of `AS OF SYSTEM TIME` which points to a time where the master database didn't exist.
In this specific case the database not found error can be ignored to avoid such messages. (if the database is really missing, we will have problems way more earlier, eg. at the login)
Change-Id: I51ee78994d91fc2a14b56646402faaaa8154c934
This patch addresses the following issues:
1. Running full migration in cockroachdb is quite slow. We already have an approach for unit tests to start from the latest snapshot. This patch makes it possible to use it for integrations tests.
2. Migration requires executing a separated command which makes it hard to run application in containerized test environments (like storj-up) or from IDE. This patch introduces a hidden flag to run migration.
3. Test user creation is painful. We do it with calling GraphQL + admin API. Providing an option with testuser makes the integration tests significant more simple (especially as the projectID -> access grant can be predictable)
Change-Id: I61010728727b490ea6aac32620f2da0484966727
Add an extra parameter to the pay-invoices command that can be used to restrict which invoices will have a payment attempted in stripe. The parameter should be of the form MM/DD/YYY and any invoices created on or after the date will have token balances applied and be processed for payment according to stripe subscriptions settings.
Change-Id: I5da5070d3ac97f45c05c02f2849254bdc44413c3
This change causes new invoices to be scheduled for automatic
advancement through Stripe if their amount due is zero. Invoices
marked for automatic advancement are exempt from the manual invoice
finalization procedure.
Change-Id: Ic583db4c86ec5243d7506d380ca3faee5e9a58d3
This change introduces the generate-invoices satellite billing
command whose functionality is equivalent to running
apply-free-coupons, prepare-invoice-records,
create-project-invoice-items, and create-invoices in order.
Invoice finalization must still be performed separately.
Change-Id: Ia3d80b95eef1f2776c38bd730ed731e42ec4c35e
Monkit calls for fast methods which are executed very frequently can
slowdown whole process. This change removes monkit calls which are not
used.
See https://review.dev.storj.io/c/storj/storj/+/8498 as an example of
speed improvement after removing monkit calls.
Change-Id: If6567d80e05b748e6393b58a5142e43013107c61
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/multiple_segments-8 5.56µs ± 5% 0.69µs ±12% -87.57% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/multiple_segments-8 2.72kB ± 0% 0.00kB ~ (p=0.079 n=4+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/multiple_segments-8 50.0 ± 0% 0.0 -100.00% (p=0.008 n=5+5)
Change-Id: I20527fb576cd81db667a81929fa95b810ee11b14
It looks that monikt monitoring can give high CPU overhead for
segments loop observer. With this code we are changing how monitoring
is initialized for observer methods. This optimization affects mainly
path where segment is healthy and doesn't require repair. Benchmark
is also added to show difference between old and new approach.
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/healthy_segment-8 8.55µs ± 4% 1.37µs ± 6% -84.03% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/healthy_segment-8 2.63kB ± 0% 0.17kB ± 0% -93.62% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/healthy_segment-8 54.0 ± 0% 8.0 ± 0% -85.19% (p=0.008 n=5+5)
Change-Id: Ie138eab0d59e436395b13f57bdfb11f9871d4c18
Two things were done to optimize audit observer:
* monik call was removed as we have different way to track it
* no new allocation for audit.Segment struct inside observer
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/multiple_segments-8 5.85µs ± 1% 0.74µs ± 4% -87.28% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/multiple_segments-8 2.72kB ± 0% 0.00kB ~ (p=0.079 n=4+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/multiple_segments-8 50.0 ± 0% 0.0 -100.00% (p=0.008 n=5+5)
Change-Id: Ib973e48782bad4346eee1cd5aee77f0a50f69258
If we need to restore the satelliteDB from a backup, we must preserve the user - storj token wallet address association. This commit adds a log statement of this information after a user successfully claims a wallet. We can perform a SQL update to reassign the wallet address to the user if needed.
Change-Id: Ia5c25d7ac57e59b35865d74068196e42bc4ffe87
We have an alert on `not_enough_shares_for_audit` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the audit framework to act in that way.
Instead, in this change, we add three new metrics,
`audit_not_enough_nodes_online`, `audit_not_enough_shares_acquired`, and
`audit_suspected_network_problem`. When an audit fails, and emits
`not_enough_shares_for_audit`, we will now determine whether it looks
like we are having network problems (most errors are connection
failures, possibly also some successful connections which subsequently
time out) or whether something else has happened.
After this is deployed, we can remove the alert on
`not_enough_shares_for_audit` and add new alerts on
`audit_not_enough_nodes_online` and `audit_not_enough_shares_acquired`.
`audit_suspected_network_problem` does not need an alert.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: Ibb256bc19d2578904f71f5229111ac98e5212fcb
While investigating high memory consumption on a Redis instance, it was found that much of the memory consumed was from cached redis scripts.
Redis caches scripts based on the hash of the script itself. This change uses ARGV to reduce the number of cached scripts.
Change-Id: Ia878fe81552a3067f09e60c44bb4ace25c6b5f9a
When doing server-side copy, deletes the committed version of the target location if it already exists. It does not touch pending versions. The version of the copy is set to the highest already existing version + 1.
Fixes: https://github.com/storj/storj/issues/5071
Change-Id: I1d91ac17054834b1f4f0970a9fa5d58198c58a37
Change the default loop interval for querying for new payments and adding them into the billing table from 1 minute to 15 seconds.
Change-Id: I26cf4a764cbe1de4c9b839ad60352374d8231522
Introduces a new endpoint on the satellite web server to get the
project's salt. The endpoint utilizes a new console service method
GetSalt which in turn calls the project DB GetSalt method if the
user is authorized. It returns the project salt bytes as a base64
encoded string in the response.
Change-Id: Ia13b5a4b8580e7bdad0dbb98014a276b1c74b46d
Restore functionality where retain filters can be sent out to multiple
storage nodes simultaneously.
Fixes https://github.com/storj/team-metainfo/issues/121
Change-Id: I2bf86a166b09c6a277c1cb455cdca0165ce6b8af
Add new project db method, GetSalt, to get project salt. If salt
column is empty, return the sha-256 hash of the project ID. This
new method is used in metainfo endpoint ProjectInfo to return the
project salt to the client. This is backwards compatible because
the salt column is not populated yet. The updated endpoint will
do the same thing as the current endpoint.
Change-Id: I7eba376c865e10995a5a916302feca7cd7c7efa2
Assert that listing works with our new object consistency approach.
Half of https://github.com/storj/storj/issues/4868
Change-Id: I5e92f86122b50103cec7bf6d3b2c8ed103caceec
Restore previously existing end-to-end garbage collection test using
the new separate services for bloom filter generation and storage node
communication.
Original tests can be found under:
https://github.com/storj/storj/blob/v1.63.1/satellite/gc/gc_test.go
Change-Id: I42d1ab0f9981dfe183140da4d08087f4a6cd9296
Return the balance as currency object with a value and currency. The values are returned in USDollarsMicro (6 digits after the decimal).
Change-Id: I88c87faf3311b72dedd293d4e754c2fd5c03c128
Change the default number of required block confirmations for a payment to be confirmed from 12 to 15.
Change-Id: I44c258134c293e7691623bc00c504130aa69a96a
We have an alert on `repair_too_many_nodes_failed` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the repair framework to act in that way.
Instead, in this change, we change the way that
`repair_too_many_nodes_failed` works. When a repair fails, we collect
piece fetch errors by type and determine from them whether it looks like
we are having network problems (most errors are connection failures,
possibly also some successful connections which subsequently time out)
or whether something else has happened.
We will now only emit `repair_too_many_nodes_failed` when the outcome
does not look like a network failure. In the network failure case, we
will instead emit `repair_suspected_network_problem`.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: I49df98da5df9c606b95ad08a2bdfec8092fba926
This structure is entirely unused within the audit module, and is only
used by repair code. Accordingly, this change moves the structure from
audit code to repair code.
Also, we take the opportunity here to rename the structure to something
less generic.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: If85b37e08620cda1fde2afe98206293e02b5c36e
Before and after segments loop we are collecting stats about number of entries in segments and objects table. We are using number of segments
to validate loop execution but currently we are not using number of
objects anywhere. This change drops SQL query to count objects count as
it's not use anywhere at the moment.
Change-Id: I25ce77758870beb0daa5c0e21084a4c633a26f15
This change adds the option of requiring users to pass a captcha
verification before password recovery emails can be sent to them.
The captcha for the Forgot Password form shares a configuration with
the one for the login form.
Change-Id: I27fdb4ed42cd9da1b4b8b1e80357892dc4091765
* Disallow too large listing limit, which would cause a lot of memory to
be consumed.
* Fix throttling logic and add a test.
* Fix read error handling; depending on the concurrency it can return
the NotFound status either in the Read or Close.
Change-Id: I778f04a5961988b2480df5c7faaa22393fc5d760
Pieces count in DB are stored as int64 and we would like to align bloom
filter processing with this type.
Change-Id: Iaec767e609a40d802077ae057520541805a7c44f
We will introduce new logic for creating new objects (BeginObject).
Instead of using single version internally (1) we will be selecting first
available version during object creation. Because we need to be sure
that everything is wired up correctly we need a feature flag to be
able to control if new feature is enabled.
Change-Id: If0f8496397130811f43bf9db9fdcc2b30cd2e4ca
Assert that listing pending objects works with our new object consistency
approach.
Half of https://github.com/storj/storj/issues/4868
Change-Id: Ic7bf3b20db57e64853d0464d7dc0da5441efd56f
* service was running wrong RunOnce method
* after doing integration with GC sender we concluded that we don't
need special flag "gc-sender" to be uploaded as its safe to consume
partial results by GC senger. This part was removed.
* prefix format for moving data after error was unified with GC
sender
https: //github.com/storj/team-metainfo/issues/120
Change-Id: I204b696b9c2def4874ad1d17d0e84231cc98d583
Implement a new service to read retain filter from a bucket and
send them out to storagenodes.
This allows the retain filters to be generated by a separate command on
a backup of the database.
Paralellism (setting ConcurrentSends) and end-to-end garbage collection
tests will be restored in a subsequent commit.
Solves https://github.com/storj/team-metainfo/issues/121
Change-Id: Iaf8a33fbf6987676cc3cf74a18a8078916fe673d
Current metainfo.ListObjects implementation is using metabase iterator to list objects.
In the non-recursive case, it used to retrieve all the corresponding rows and then discarded the entries that did not fit the listing request.
This can lead in some edge cases (each prefix contains more than batchsize objects/sub-prefixes) to make unecessary calls to the db.
This change defines the metabase.ListObjects and aims at retrieving only prefixes (but not objects under it) and objects by modifying the SQL query.
In this version, it is not optimized on the database side. Cockroach will still have to go through all rows under a prefix, so there is still room for improvement.
metainfo.ListObjects is not currently using this method as we would like to assess its performance on the QA satellite first.
Fixes https://github.com/storj/storj/issues/5088
Change-Id: Ied3a9210871871d9d4a3096888d3e40c2dceed61
Rather than using Invoice Items to account for storjscan token payments, credit notes will be used and applied to the users finalized invoice. This credit note will reduce the amount due of the users invoice based on the amount of storj token balance the user has on the satellite. Applying credit notes to a finalized invoice also requires that the invoice not be automatically paid when finalized. Therefore, a new command (pay-invoices) was added to initiate payment for users invoices.
Change-Id: Ie539375a10e842e3cb64bf0140834bbab0774f54
They are needed for segment-verify tool.
Also rename some of the conversion methods to make clear,
which of them have side-effects.
Change-Id: Ie9a0952548e9ed5068c7a30c2fd2134b07139bca
Bloom filter CreationDate is used to avoid deleting pieces that
where not processed by GC. Every piece created after that timestamp
won't be deleted. Current GC process is taking CreationDate as a
beginning of bloom filter creation. This is appraoch allows to avoid
issues with inconsistent view on DB as currently we are using live DB
to create bloom filters.
With appraoch were we will be using DB snaphot with segment loop
we can get CreationDate from latest created segment in DB. Every piece
created after latest created segment won't be touched by GC on storage
node.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I6aaf64948ab7f60cfea62195689ad77c25ea772e
Update storjscan API payment type to use currency.Amount for token and
usd values.
Update storjscan version for testsuite intgration tests.
Change-Id: Ie4ba7277b25d0d297a0130a8b885d6d38ff5eea4
If source and destination are the same, do nothing and return the original object.
Later, we will have to handle the case when metadata is changed, but for now it's not possible through libuplink.
An issue has been created for this (https://github.com/storj/storj/issues/5168)
Change-Id: I91cf48afeec498d3b2c219fa0d3baf2163cff384
By including NodeURL in the OIDC well-known configuration, we're
able to discover the NodeURL for a given HTTP address without
any client side assumptions or needing to make a drpc to discover
this. Instead, it's included in a call that is already made by an
OIDC/OAuth enabled client.
Change-Id: If00f31665ca69b1f522e26fec825b29ad03fe7f9
We need a method for getting a list of segments from the metabase,
without converting the aliases and omitting all inline segments.
Change-Id: I26d919c675fc285ab03a35b327edd9b5c8bbe4b0
Main issue with those tests was that for case where all objects were
uploaded at once (case "some nodes down" and "all nodes down").
Because all objects had the same name while upload each new object
was overwriting existing object. Because of that instead had several
objects to delete by test explicitly we had just 1. Test were not
failing because while overwriting existing object we were deleting it
but it was not what this test should do.
Change-Id: I602116f00be66589c7c0e68fe28c25e5c03e6b5d
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket.
This change add main logic to new service. After collecting all bloom
filters with segment loop and piece tracker all filters are marshaled
and packed into zip files. Each zip contains up to "ZipBatchSize" bloom
filters and it's uploaded to specified in configuration bucket.
All uploaded objects have specified expiration time to not delete them
manually.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I2b6bc02a7dd7c3a639e75810fd013ae4afdc80a2
We plan to replace metabase.BeginObjectExactVersion usage in
metainfo.BeginObject with metabase.BeginObjectNextVersion. To make this
switch as simple a possible would be nice to have the same results for
both methods. This change is extending return value for
BeginObjectNextVersion to whole object struct. Tests were also adjusted
to be more like metabase.BeginObjectExactVersion tests.
Part of https://github.com/storj/storj/issues/4871
Change-Id: I4db99d74af07e5a73757b55233e0bbdc7b99d565
This change implements a requirement that all new passwords must be
no longer than 128 characters.
Change-Id: I7a8f23c87190d465eed59b3e0627ccd32d465bb9
Remove pkg satellite/payments/monetary as it moved to storj.io/common.
Update all code pkg references from monetary to common/currency.
Change-Id: If2519f4c80cf315a9299e6521a6b9bbc6c399156
Our Test Versions still requires 1.16 to be compatible with our oldest
uplink versions. These changes make the code compile with 1.16.
Also, it makes go generate work in private/apigen/example.
Change-Id: Ib2f7493941a16f361328fe01d2be293f26123719
Currently the paths were set relative to the root of the module,
however the code did not ensure that we are running relative to the
module directory.
Also, ensure typescript output corresponds to our styling.
Change-Id: I2b3cbd4ea8f2615e35c7b58c6fb8851669c47885
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket.
This change adds integration with testplanet which makes writing
unit tests possible.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I7b335c5dafa8cffe265c56b75d8c8f8567580893
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket. This this initial change to add such
service. Added service is joining segment loop and collects all
bloom filters.
Sending bloom filters to the bucket will be added as a subsequent
change.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I2551723605afa41bec84826b0c647cd1f61f3b14
This change adds the following endpoints:
- projects/apikeys/{id}: returns a paged list of API keys for the
project specified by the given ID
- apikeys/delete/{id}: deletes the API key specified by the given ID
Additionally, the API Go code generator has been given the ability to
process unsigned integer parameters.
Change-Id: I5ff24e012da24a3f06bea1ebb62bae6ff62f951a
Add the users current wallet balance to the endpoints for claiming and listing storjscan wallets. Also prevent a user with a claimed wallet address from claiming a new wallet.
Change-Id: I0dbf1303699f924d05c8c52359038dc5ef6c42a1
method similar to metabase.DeleteObjectExactVersion which will delete last committed object
Closes https://github.com/storj/storj/issues/4872
Change-Id: Ia9f8c227dc59575bf8ed297886b35536097028b4
Adds USDollarsMicro currency to the billing DB which support fraction of a cent with decimal places for better billing amounts accuracy.
Change-Id: Id07dfae104d94e27c7b22ab8f5781010e16c4c8e
Removed batch insert of payments since they do not guarantee order. Order of payments sent to the payments DB is important, because the billing chore will request new payments based on the last received payment. If the last payment inserted is not the last payment received, duplicate payments will be inserted into the billing table.
Change-Id: Ic3335c89fa8031f7bc16f417ca23ed83301ef8f6
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket. This change is just initial code with peer
which will be used to build this new process.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I10a52b74865ce8ec4c29b7c6a2836f9232620422
Add new protobuff message to store retain filters before sending them
out to storagenodes.
This allows the retain filters to be generated by a separate command on
a backup of the database.
Change-Id: I8a2892d9d34bed1dbd6e5a7ded000dcdea7ec061
We are preparing to use object versions internally and to do
that we need to prepare different parts of the system to handle
object versions different than '1'. This change adjust code
responsible for server-side move and copy.
What was done:
* begin methods for move and copy are now using GetObjectLastCommitted
to find object
* results from begin move and copy operation contains now version to
be able to map object correctly with finish operation
* begin methods are putting version into satellite stream id and
finish methods are using this version as parameter instead hardcoded
value
Fixes https://github.com/storj/storj/issues/4867
Change-Id: I1380911279c21e10a3fff0342793efd2e73eafad
Implemented share bucket feature.
Refactored share object modal a bit (has to be refactored entirely).
Issue:
https://github.com/storj/storj/issues/4945
Change-Id: Icefd4bfe3eef9173ae824eea44d30450acde8044
This concludes the saga that began with commit c053bdbd, migrating away
from using gob-encoded big.Float values in the database to using
integers with an implied number of decimal places.
Nothing is using or accessing or expecting the _gob columns to exist
anymore. The transition code and the migration chore are gone. All that
remains is to drop the columns.
Change-Id: I9b15ee52f7781510a6dc91cf7c54f7f9022b1210
Currently we are tracking loop time with RunOnce method
metrics but it may give inaccurate values if loop if waiting
for observer for a ver long time. We had such case with GC
which is only loop observer in GC peer and its joning loop
every 5 days.
Change-Id: I08546c912e00c3641488de6a5d75948fe75c8e99
Currently, the satellite tracks connectivity information about all nodes
that have contacted it, even if we have never successfully contacted
the node back.
This behavior was leveraged during a security audit to create hundreds
of thousands of "junk nodes" in the nodes table on one satellite, which
affected performance of queries such as node selection.
With this change, we should no longer track information about nodes that
have never been successfully contacted.
Note that it will still be possible to cause the creation of "junk
node" entries in the db; the attacker just has to set up individual
publicly-routable IP+port pairs for each node as it is created, so it
can respond to a PingBack.
Change-Id: Ibb6da6cc908fd4fc85aae1ba00313ba2738409ab
Metadata validation for CommitObject request was placed in a wrong
place. There is a case (old uplink) where encrypted key is bundled
inside encrypted metadata bytes and we need to extract it before we
can validate it. This change moves metadata validation to a place where
we are sure we have encrypted metadata and encrypted metadata encrypted
key ready to be checked.
"Run Versions Test" is covering this case and it was failing without
this change.
Change-Id: Ib709ad901fbb3fa4865a393195b7b3f4c0d87e7a
For object Version in different places we are using different types.
Satellite StreamID is using int32 but metabase accepts int64. Metabase
type is correct one and we should align other places with it.
As a small addition this change is also passing version correctly
between requests instead of using hardcoded value.
Change-Id: I63634d73c0a48c009e4db5f203ff18b7f3218b02
Updated metabase.UpdateObjectMetadata method to update set metdata always for last committed object
Closes https://github.com/storj/storj/issues/4870
Change-Id: I060683e31efcaf3e2531fea143cf0567e5ff5f73
Sessions now expire after a much shorter amount of time, requiring
clients to issue API requests for session extension. This is handled
behind the scenes as the user interacts with the page, but once session
expiration is imminent, a modal appears which informs the user of his
inactivity and presents him with the choice of loging out or preserving
his session.
Change-Id: I68008d45859c814a835d65d882ad5ad2199d618e
This change tracks signup captcha scores in the signup_captcha column in the users table.
It slightly modifies the captcha verify method to return both the score and success.
see: https://github.com/storj/storj/issues/5067
Change-Id: I7b3993e44958cfcf179806c7df19d6887fe3eda9
