ReverifyPiece() is not currently hooked up to anything, but is planned
to take the place of audit.(*Verifier).Reverify().
ReverifyPiece() works by downloading one piece in its entirety, rather
than pulling an entire stripe across many nodes.
Change-Id: Ie2c680f4d3c3b65273a72466a3f9f55c115b0311
This table will be used as a queue for pieces that need to be reverified
(a regular audit timed out on the owning node, so now that node is
contained and we need to validate the piece before un-containing it).
Refs: https://github.com/storj/storj/issues/5228
Change-Id: I5dcd26b6adced8674cbd81884c1543a61ea9d4c8
BeginCopyObject checks twice for write permission in the destination
bucket. One check should be enough.
Change-Id: I3d5935d34f69cd48eaaf00d0117683edfdcefc05
The procedure responsible for node reputation status comparison could
return an invalid result due to comparing a status timestamp against
itself rather than comparing it against another. This results in
unnecessary database updates that could be avoided otherwise.
This change modifies the procedure to resolve this issue.
Change-Id: Id147e1942e994e8bca4ced2a9358f2474927d6ec
We had multiple experiment so far to collect high cardinality data (mainly in aggregated form).
1. we have a `/top` endpoint which aggregates events with upper bound
2. we use same api (eventstat) to publish S3 gateway-mt agents to influxdb
This patch starts to replace theses api with jtolio/eventkit. Instead of aggregation all events can be sent to a collector host where we can do aggregation and/or persisting data.
Change-Id: Id6df4882b51d2dbd2be9401ee4199d14f3ff7186
The threshold of piece deletions from the nodes during CommitObject
when overriding an existing object seemed to cause a race condition in
tests.
This change makes the threshold configurable so we can set it to maximum
so CommitObject waits until all pieces are removed from the nodes in the
test.
Change-Id: Idf6b52e71d0082a1cd87ad99a2edded6892d02a8
We removed monkit call from "object" method because it was using
too much cpu and was visible on cpu profile but we should first try
optimized version of this call.
Change-Id: Ib76d8a2968a704ce47235c6dac6edad4e40bde48
One of two parts to stop using objects loop for bucket accounting,
this method collects bucket tallies from list of bucket locations
part1 of: https://github.com/storj/team-metainfo/issues/125
Change-Id: Id2d492582453e28463cddf1245622fb7f191050c
We want to send emails to SNOs. Node status changes go through the
overlay service, so it's a good place to add the mail service.
Add the mailservice.Service, satellite address, and satellite name to
overlay service. Also add feature flag --overlay.send-node-emails
Change-Id: I3bd2cb3bf22f9724954ce2374f8b651b902b3a24
Add getSalt to projects api. Add action, GET_SALT, on Store
Projects module to make the api request and return the salt
string everywhere in the web app that generates an access grant.
The Wasm code which is used to create the access grant has been
changed to decode the salt as a base64 encoded string. The names
of the function calls in the changed Wasm code have also been
changed to ensure that access grant creation fails if JS access
grant worker code and Wasm code are not the same version.
https://github.com/storj/storj-private/issues/64
Change-Id: Ia2bc4cbadad84b066ca1882b042a3f0bb13c783a
We have new flow where existing object is deleted not on begin
object but on commit object. Deletion on commit object is still
missing deletion from storage nodes. This change adds this part
to the code.
Fixes https://github.com/storj/storj/issues/5222
Change-Id: Ibfd34665b2a055ec6c0d6e260c1a57e8a4c62b0e
We have a code to limit segments loop in case it will hit DB to hard
but so far we didn't use this loop feature in production. This is a
simple change to avoid logic responsible for rate limiting and its
monitoring if limiting is disabled (RateLimit = 0)
Change-Id: I43e07b407c6e65cf252303159d052eef250d1bea
Until this change we were stripping prefix from object key on satellite side. Because of that we were transferring over network unnecessary data
from DB. This change adjusts iterator SQL queries to use SUBSTRING to
remove prefix on DB side and avoid sending it to satellite.
Benchmark against 'main':
unfortunately "time/op" is very unstable while doing local bench in this
case and sometimes there is no difference in time and sometimes its up to 18%. I never saw results when old solution is faster then new one. Results for "alloc/op" and "allocs/op" are rather consistent.
name old time/op new time/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 1.98ms ± 6% 2.05ms ±23% ~ (p=1.000 n=9+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 3.97ms ± 8% 3.42ms ±20% -13.86% (p=0.005 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 8.42ms ±16% 7.58ms ± 5% -9.91% (p=0.002 n=10+10)
name old alloc/op new alloc/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 16.7kB ± 0% 16.9kB ± 0% +1.16% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 27.3kB ± 0% 28.2kB ± 0% +3.31% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 60.0kB ± 0% 62.4kB ± 0% +3.93% (p=0.000 n=10+8)
name old allocs/op new allocs/op delta
NonRecursiveListing/Cockroach/listing_no_prefix-8 312 ± 0% 315 ± 0% +0.96% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_with_prefix-8 526 ± 0% 541 ± 0% +2.85% (p=0.000 n=10+10)
NonRecursiveListing/Cockroach/listing_only_prefix-8 1.16k ± 0% 1.23k ± 0% +5.24% (p=0.000 n=10+10)
Change-Id: I23e501494ededafb2dd5ea903e8e4e313b42e956
This change increments users' failed_login_count in the database layer to avoid potential data race.
It also updates the login_lockout_expiration as well in one operation.
see: https://github.com/storj/storj/issues/4986
Change-Id: I74624f1bee31667b269cb205d74d16e79daabcb6
With this change we are switching methods to begin object, from
BeginObjectExactVersion to BeginObjectNextVersion. Main implication
is that from now it will be possible to have object with version
different than 1. New object will always get first available version.
Main reason to do this it to avoid deleting existing object during
reuploading object. Now we can create multiple pending objects but
only last committed will be available to the user. Any previous
committed object will be deleted.Because of that we moved logic to
delete existing object from BeginObject to CommitoObject request.
New logic is behind feature flat to be able to test it well first
before enablng on production.
Fixes https://github.com/storj/storj/issues/4871
Change-Id: I2dd9c7364fd93796a05ef607bda9c39a741e6a89
The flags weren't properly loading from config.
The code assumed that every node that's online for downloading also have
data uploaded to them -- which is not true.
Change-Id: Ifd65a47b9eca5b4841231928244fab17acbde6fb
This is another change to remove monkit calls from fast methods. Those
calls are visible in CPU profiles.
Change-Id: Ib3beba0dca6a6d93c3342b0994c580f78bbdd50b
After you create a brand new cluster (with storj-up, for example) the project usage fails during the first 5 minutes.
The problem is the usage of `AS OF SYSTEM TIME` which points to a time where the master database didn't exist.
In this specific case the database not found error can be ignored to avoid such messages. (if the database is really missing, we will have problems way more earlier, eg. at the login)
Change-Id: I51ee78994d91fc2a14b56646402faaaa8154c934
This patch addresses the following issues:
1. Running full migration in cockroachdb is quite slow. We already have an approach for unit tests to start from the latest snapshot. This patch makes it possible to use it for integrations tests.
2. Migration requires executing a separated command which makes it hard to run application in containerized test environments (like storj-up) or from IDE. This patch introduces a hidden flag to run migration.
3. Test user creation is painful. We do it with calling GraphQL + admin API. Providing an option with testuser makes the integration tests significant more simple (especially as the projectID -> access grant can be predictable)
Change-Id: I61010728727b490ea6aac32620f2da0484966727
Add an extra parameter to the pay-invoices command that can be used to restrict which invoices will have a payment attempted in stripe. The parameter should be of the form MM/DD/YYY and any invoices created on or after the date will have token balances applied and be processed for payment according to stripe subscriptions settings.
Change-Id: I5da5070d3ac97f45c05c02f2849254bdc44413c3
This change causes new invoices to be scheduled for automatic
advancement through Stripe if their amount due is zero. Invoices
marked for automatic advancement are exempt from the manual invoice
finalization procedure.
Change-Id: Ic583db4c86ec5243d7506d380ca3faee5e9a58d3
This change introduces the generate-invoices satellite billing
command whose functionality is equivalent to running
apply-free-coupons, prepare-invoice-records,
create-project-invoice-items, and create-invoices in order.
Invoice finalization must still be performed separately.
Change-Id: Ia3d80b95eef1f2776c38bd730ed731e42ec4c35e
Monkit calls for fast methods which are executed very frequently can
slowdown whole process. This change removes monkit calls which are not
used.
See https://review.dev.storj.io/c/storj/storj/+/8498 as an example of
speed improvement after removing monkit calls.
Change-Id: If6567d80e05b748e6393b58a5142e43013107c61
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/multiple_segments-8 5.56µs ± 5% 0.69µs ±12% -87.57% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/multiple_segments-8 2.72kB ± 0% 0.00kB ~ (p=0.079 n=4+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/multiple_segments-8 50.0 ± 0% 0.0 -100.00% (p=0.008 n=5+5)
Change-Id: I20527fb576cd81db667a81929fa95b810ee11b14
It looks that monikt monitoring can give high CPU overhead for
segments loop observer. With this code we are changing how monitoring
is initialized for observer methods. This optimization affects mainly
path where segment is healthy and doesn't require repair. Benchmark
is also added to show difference between old and new approach.
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/healthy_segment-8 8.55µs ± 4% 1.37µs ± 6% -84.03% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/healthy_segment-8 2.63kB ± 0% 0.17kB ± 0% -93.62% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/healthy_segment-8 54.0 ± 0% 8.0 ± 0% -85.19% (p=0.008 n=5+5)
Change-Id: Ie138eab0d59e436395b13f57bdfb11f9871d4c18
Two things were done to optimize audit observer:
* monik call was removed as we have different way to track it
* no new allocation for audit.Segment struct inside observer
Benchmark against 'main':
name old time/op new time/op delta
RemoteSegment/Cockroach/multiple_segments-8 5.85µs ± 1% 0.74µs ± 4% -87.28% (p=0.008 n=5+5)
name old alloc/op new alloc/op delta
RemoteSegment/Cockroach/multiple_segments-8 2.72kB ± 0% 0.00kB ~ (p=0.079 n=4+5)
name old allocs/op new allocs/op delta
RemoteSegment/Cockroach/multiple_segments-8 50.0 ± 0% 0.0 -100.00% (p=0.008 n=5+5)
Change-Id: Ib973e48782bad4346eee1cd5aee77f0a50f69258
If we need to restore the satelliteDB from a backup, we must preserve the user - storj token wallet address association. This commit adds a log statement of this information after a user successfully claims a wallet. We can perform a SQL update to reassign the wallet address to the user if needed.
Change-Id: Ia5c25d7ac57e59b35865d74068196e42bc4ffe87
We have an alert on `not_enough_shares_for_audit` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the audit framework to act in that way.
Instead, in this change, we add three new metrics,
`audit_not_enough_nodes_online`, `audit_not_enough_shares_acquired`, and
`audit_suspected_network_problem`. When an audit fails, and emits
`not_enough_shares_for_audit`, we will now determine whether it looks
like we are having network problems (most errors are connection
failures, possibly also some successful connections which subsequently
time out) or whether something else has happened.
After this is deployed, we can remove the alert on
`not_enough_shares_for_audit` and add new alerts on
`audit_not_enough_nodes_online` and `audit_not_enough_shares_acquired`.
`audit_suspected_network_problem` does not need an alert.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: Ibb256bc19d2578904f71f5229111ac98e5212fcb
While investigating high memory consumption on a Redis instance, it was found that much of the memory consumed was from cached redis scripts.
Redis caches scripts based on the hash of the script itself. This change uses ARGV to reduce the number of cached scripts.
Change-Id: Ia878fe81552a3067f09e60c44bb4ace25c6b5f9a
When doing server-side copy, deletes the committed version of the target location if it already exists. It does not touch pending versions. The version of the copy is set to the highest already existing version + 1.
Fixes: https://github.com/storj/storj/issues/5071
Change-Id: I1d91ac17054834b1f4f0970a9fa5d58198c58a37
Change the default loop interval for querying for new payments and adding them into the billing table from 1 minute to 15 seconds.
Change-Id: I26cf4a764cbe1de4c9b839ad60352374d8231522
Introduces a new endpoint on the satellite web server to get the
project's salt. The endpoint utilizes a new console service method
GetSalt which in turn calls the project DB GetSalt method if the
user is authorized. It returns the project salt bytes as a base64
encoded string in the response.
Change-Id: Ia13b5a4b8580e7bdad0dbb98014a276b1c74b46d
Restore functionality where retain filters can be sent out to multiple
storage nodes simultaneously.
Fixes https://github.com/storj/team-metainfo/issues/121
Change-Id: I2bf86a166b09c6a277c1cb455cdca0165ce6b8af
Add new project db method, GetSalt, to get project salt. If salt
column is empty, return the sha-256 hash of the project ID. This
new method is used in metainfo endpoint ProjectInfo to return the
project salt to the client. This is backwards compatible because
the salt column is not populated yet. The updated endpoint will
do the same thing as the current endpoint.
Change-Id: I7eba376c865e10995a5a916302feca7cd7c7efa2
Assert that listing works with our new object consistency approach.
Half of https://github.com/storj/storj/issues/4868
Change-Id: I5e92f86122b50103cec7bf6d3b2c8ed103caceec
Restore previously existing end-to-end garbage collection test using
the new separate services for bloom filter generation and storage node
communication.
Original tests can be found under:
https://github.com/storj/storj/blob/v1.63.1/satellite/gc/gc_test.go
Change-Id: I42d1ab0f9981dfe183140da4d08087f4a6cd9296
Return the balance as currency object with a value and currency. The values are returned in USDollarsMicro (6 digits after the decimal).
Change-Id: I88c87faf3311b72dedd293d4e754c2fd5c03c128
Change the default number of required block confirmations for a payment to be confirmed from 12 to 15.
Change-Id: I44c258134c293e7691623bc00c504130aa69a96a
We have an alert on `repair_too_many_nodes_failed` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the repair framework to act in that way.
Instead, in this change, we change the way that
`repair_too_many_nodes_failed` works. When a repair fails, we collect
piece fetch errors by type and determine from them whether it looks like
we are having network problems (most errors are connection failures,
possibly also some successful connections which subsequently time out)
or whether something else has happened.
We will now only emit `repair_too_many_nodes_failed` when the outcome
does not look like a network failure. In the network failure case, we
will instead emit `repair_suspected_network_problem`.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: I49df98da5df9c606b95ad08a2bdfec8092fba926
This structure is entirely unused within the audit module, and is only
used by repair code. Accordingly, this change moves the structure from
audit code to repair code.
Also, we take the opportunity here to rename the structure to something
less generic.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: If85b37e08620cda1fde2afe98206293e02b5c36e
Before and after segments loop we are collecting stats about number of entries in segments and objects table. We are using number of segments
to validate loop execution but currently we are not using number of
objects anywhere. This change drops SQL query to count objects count as
it's not use anywhere at the moment.
Change-Id: I25ce77758870beb0daa5c0e21084a4c633a26f15
This change adds the option of requiring users to pass a captcha
verification before password recovery emails can be sent to them.
The captcha for the Forgot Password form shares a configuration with
the one for the login form.
Change-Id: I27fdb4ed42cd9da1b4b8b1e80357892dc4091765
* Disallow too large listing limit, which would cause a lot of memory to
be consumed.
* Fix throttling logic and add a test.
* Fix read error handling; depending on the concurrency it can return
the NotFound status either in the Read or Close.
Change-Id: I778f04a5961988b2480df5c7faaa22393fc5d760
Pieces count in DB are stored as int64 and we would like to align bloom
filter processing with this type.
Change-Id: Iaec767e609a40d802077ae057520541805a7c44f
We will introduce new logic for creating new objects (BeginObject).
Instead of using single version internally (1) we will be selecting first
available version during object creation. Because we need to be sure
that everything is wired up correctly we need a feature flag to be
able to control if new feature is enabled.
Change-Id: If0f8496397130811f43bf9db9fdcc2b30cd2e4ca
Assert that listing pending objects works with our new object consistency
approach.
Half of https://github.com/storj/storj/issues/4868
Change-Id: Ic7bf3b20db57e64853d0464d7dc0da5441efd56f
* service was running wrong RunOnce method
* after doing integration with GC sender we concluded that we don't
need special flag "gc-sender" to be uploaded as its safe to consume
partial results by GC senger. This part was removed.
* prefix format for moving data after error was unified with GC
sender
https: //github.com/storj/team-metainfo/issues/120
Change-Id: I204b696b9c2def4874ad1d17d0e84231cc98d583
Implement a new service to read retain filter from a bucket and
send them out to storagenodes.
This allows the retain filters to be generated by a separate command on
a backup of the database.
Paralellism (setting ConcurrentSends) and end-to-end garbage collection
tests will be restored in a subsequent commit.
Solves https://github.com/storj/team-metainfo/issues/121
Change-Id: Iaf8a33fbf6987676cc3cf74a18a8078916fe673d
Current metainfo.ListObjects implementation is using metabase iterator to list objects.
In the non-recursive case, it used to retrieve all the corresponding rows and then discarded the entries that did not fit the listing request.
This can lead in some edge cases (each prefix contains more than batchsize objects/sub-prefixes) to make unecessary calls to the db.
This change defines the metabase.ListObjects and aims at retrieving only prefixes (but not objects under it) and objects by modifying the SQL query.
In this version, it is not optimized on the database side. Cockroach will still have to go through all rows under a prefix, so there is still room for improvement.
metainfo.ListObjects is not currently using this method as we would like to assess its performance on the QA satellite first.
Fixes https://github.com/storj/storj/issues/5088
Change-Id: Ied3a9210871871d9d4a3096888d3e40c2dceed61
Rather than using Invoice Items to account for storjscan token payments, credit notes will be used and applied to the users finalized invoice. This credit note will reduce the amount due of the users invoice based on the amount of storj token balance the user has on the satellite. Applying credit notes to a finalized invoice also requires that the invoice not be automatically paid when finalized. Therefore, a new command (pay-invoices) was added to initiate payment for users invoices.
Change-Id: Ie539375a10e842e3cb64bf0140834bbab0774f54
They are needed for segment-verify tool.
Also rename some of the conversion methods to make clear,
which of them have side-effects.
Change-Id: Ie9a0952548e9ed5068c7a30c2fd2134b07139bca
Bloom filter CreationDate is used to avoid deleting pieces that
where not processed by GC. Every piece created after that timestamp
won't be deleted. Current GC process is taking CreationDate as a
beginning of bloom filter creation. This is appraoch allows to avoid
issues with inconsistent view on DB as currently we are using live DB
to create bloom filters.
With appraoch were we will be using DB snaphot with segment loop
we can get CreationDate from latest created segment in DB. Every piece
created after latest created segment won't be touched by GC on storage
node.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I6aaf64948ab7f60cfea62195689ad77c25ea772e
Update storjscan API payment type to use currency.Amount for token and
usd values.
Update storjscan version for testsuite intgration tests.
Change-Id: Ie4ba7277b25d0d297a0130a8b885d6d38ff5eea4
If source and destination are the same, do nothing and return the original object.
Later, we will have to handle the case when metadata is changed, but for now it's not possible through libuplink.
An issue has been created for this (https://github.com/storj/storj/issues/5168)
Change-Id: I91cf48afeec498d3b2c219fa0d3baf2163cff384
By including NodeURL in the OIDC well-known configuration, we're
able to discover the NodeURL for a given HTTP address without
any client side assumptions or needing to make a drpc to discover
this. Instead, it's included in a call that is already made by an
OIDC/OAuth enabled client.
Change-Id: If00f31665ca69b1f522e26fec825b29ad03fe7f9
We need a method for getting a list of segments from the metabase,
without converting the aliases and omitting all inline segments.
Change-Id: I26d919c675fc285ab03a35b327edd9b5c8bbe4b0
Main issue with those tests was that for case where all objects were
uploaded at once (case "some nodes down" and "all nodes down").
Because all objects had the same name while upload each new object
was overwriting existing object. Because of that instead had several
objects to delete by test explicitly we had just 1. Test were not
failing because while overwriting existing object we were deleting it
but it was not what this test should do.
Change-Id: I602116f00be66589c7c0e68fe28c25e5c03e6b5d
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket.
This change add main logic to new service. After collecting all bloom
filters with segment loop and piece tracker all filters are marshaled
and packed into zip files. Each zip contains up to "ZipBatchSize" bloom
filters and it's uploaded to specified in configuration bucket.
All uploaded objects have specified expiration time to not delete them
manually.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I2b6bc02a7dd7c3a639e75810fd013ae4afdc80a2
We plan to replace metabase.BeginObjectExactVersion usage in
metainfo.BeginObject with metabase.BeginObjectNextVersion. To make this
switch as simple a possible would be nice to have the same results for
both methods. This change is extending return value for
BeginObjectNextVersion to whole object struct. Tests were also adjusted
to be more like metabase.BeginObjectExactVersion tests.
Part of https://github.com/storj/storj/issues/4871
Change-Id: I4db99d74af07e5a73757b55233e0bbdc7b99d565
This change implements a requirement that all new passwords must be
no longer than 128 characters.
Change-Id: I7a8f23c87190d465eed59b3e0627ccd32d465bb9
Remove pkg satellite/payments/monetary as it moved to storj.io/common.
Update all code pkg references from monetary to common/currency.
Change-Id: If2519f4c80cf315a9299e6521a6b9bbc6c399156
Our Test Versions still requires 1.16 to be compatible with our oldest
uplink versions. These changes make the code compile with 1.16.
Also, it makes go generate work in private/apigen/example.
Change-Id: Ib2f7493941a16f361328fe01d2be293f26123719
Currently the paths were set relative to the root of the module,
however the code did not ensure that we are running relative to the
module directory.
Also, ensure typescript output corresponds to our styling.
Change-Id: I2b3cbd4ea8f2615e35c7b58c6fb8851669c47885
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket.
This change adds integration with testplanet which makes writing
unit tests possible.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I7b335c5dafa8cffe265c56b75d8c8f8567580893
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket. This this initial change to add such
service. Added service is joining segment loop and collects all
bloom filters.
Sending bloom filters to the bucket will be added as a subsequent
change.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I2551723605afa41bec84826b0c647cd1f61f3b14
This change adds the following endpoints:
- projects/apikeys/{id}: returns a paged list of API keys for the
project specified by the given ID
- apikeys/delete/{id}: deletes the API key specified by the given ID
Additionally, the API Go code generator has been given the ability to
process unsigned integer parameters.
Change-Id: I5ff24e012da24a3f06bea1ebb62bae6ff62f951a
Add the users current wallet balance to the endpoints for claiming and listing storjscan wallets. Also prevent a user with a claimed wallet address from claiming a new wallet.
Change-Id: I0dbf1303699f924d05c8c52359038dc5ef6c42a1
method similar to metabase.DeleteObjectExactVersion which will delete last committed object
Closes https://github.com/storj/storj/issues/4872
Change-Id: Ia9f8c227dc59575bf8ed297886b35536097028b4
Adds USDollarsMicro currency to the billing DB which support fraction of a cent with decimal places for better billing amounts accuracy.
Change-Id: Id07dfae104d94e27c7b22ab8f5781010e16c4c8e
Removed batch insert of payments since they do not guarantee order. Order of payments sent to the payments DB is important, because the billing chore will request new payments based on the last received payment. If the last payment inserted is not the last payment received, duplicate payments will be inserted into the billing table.
Change-Id: Ic3335c89fa8031f7bc16f417ca23ed83301ef8f6
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket. This change is just initial code with peer
which will be used to build this new process.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I10a52b74865ce8ec4c29b7c6a2836f9232620422
Add new protobuff message to store retain filters before sending them
out to storagenodes.
This allows the retain filters to be generated by a separate command on
a backup of the database.
Change-Id: I8a2892d9d34bed1dbd6e5a7ded000dcdea7ec061
We are preparing to use object versions internally and to do
that we need to prepare different parts of the system to handle
object versions different than '1'. This change adjust code
responsible for server-side move and copy.
What was done:
* begin methods for move and copy are now using GetObjectLastCommitted
to find object
* results from begin move and copy operation contains now version to
be able to map object correctly with finish operation
* begin methods are putting version into satellite stream id and
finish methods are using this version as parameter instead hardcoded
value
Fixes https://github.com/storj/storj/issues/4867
Change-Id: I1380911279c21e10a3fff0342793efd2e73eafad
Implemented share bucket feature.
Refactored share object modal a bit (has to be refactored entirely).
Issue:
https://github.com/storj/storj/issues/4945
Change-Id: Icefd4bfe3eef9173ae824eea44d30450acde8044
This concludes the saga that began with commit c053bdbd, migrating away
from using gob-encoded big.Float values in the database to using
integers with an implied number of decimal places.
Nothing is using or accessing or expecting the _gob columns to exist
anymore. The transition code and the migration chore are gone. All that
remains is to drop the columns.
Change-Id: I9b15ee52f7781510a6dc91cf7c54f7f9022b1210
Currently we are tracking loop time with RunOnce method
metrics but it may give inaccurate values if loop if waiting
for observer for a ver long time. We had such case with GC
which is only loop observer in GC peer and its joning loop
every 5 days.
Change-Id: I08546c912e00c3641488de6a5d75948fe75c8e99
Currently, the satellite tracks connectivity information about all nodes
that have contacted it, even if we have never successfully contacted
the node back.
This behavior was leveraged during a security audit to create hundreds
of thousands of "junk nodes" in the nodes table on one satellite, which
affected performance of queries such as node selection.
With this change, we should no longer track information about nodes that
have never been successfully contacted.
Note that it will still be possible to cause the creation of "junk
node" entries in the db; the attacker just has to set up individual
publicly-routable IP+port pairs for each node as it is created, so it
can respond to a PingBack.
Change-Id: Ibb6da6cc908fd4fc85aae1ba00313ba2738409ab
Metadata validation for CommitObject request was placed in a wrong
place. There is a case (old uplink) where encrypted key is bundled
inside encrypted metadata bytes and we need to extract it before we
can validate it. This change moves metadata validation to a place where
we are sure we have encrypted metadata and encrypted metadata encrypted
key ready to be checked.
"Run Versions Test" is covering this case and it was failing without
this change.
Change-Id: Ib709ad901fbb3fa4865a393195b7b3f4c0d87e7a
For object Version in different places we are using different types.
Satellite StreamID is using int32 but metabase accepts int64. Metabase
type is correct one and we should align other places with it.
As a small addition this change is also passing version correctly
between requests instead of using hardcoded value.
Change-Id: I63634d73c0a48c009e4db5f203ff18b7f3218b02
Updated metabase.UpdateObjectMetadata method to update set metdata always for last committed object
Closes https://github.com/storj/storj/issues/4870
Change-Id: I060683e31efcaf3e2531fea143cf0567e5ff5f73
Sessions now expire after a much shorter amount of time, requiring
clients to issue API requests for session extension. This is handled
behind the scenes as the user interacts with the page, but once session
expiration is imminent, a modal appears which informs the user of his
inactivity and presents him with the choice of loging out or preserving
his session.
Change-Id: I68008d45859c814a835d65d882ad5ad2199d618e
This change tracks signup captcha scores in the signup_captcha column in the users table.
It slightly modifies the captcha verify method to return both the score and success.
see: https://github.com/storj/storj/issues/5067
Change-Id: I7b3993e44958cfcf179806c7df19d6887fe3eda9
Use the provided ConstraintViolation method of the pgutil package rather than importing jackc pgxerrcode directly.
Change-Id: I4e86713000b3f5f0aadd54beee8ee239f0c8df8e
This change reverts satellite/metabase/iterator.go of 7390f389c to the
previous version (without optimization) but leaves added benchmarks in
place.
We noticed that this optimization doesn't work and actually elevates
listing times for most buckets, hence the revert until we come up with a
better idea.
Benchmarks:
name old time/op new time/op delta
NonRecursiveListing/Postgres/listing_no_prefix-8 1.30ms ± 4% 4.52ms ± 4% +246.92% (p=0.008 n=5+5)
NonRecursiveListing/Postgres/listing_with_prefix-8 3.26ms ± 3% 4.44ms ± 2% +36.19% (p=0.008 n=5+5)
NonRecursiveListing/Cockroach/listing_no_prefix-8 618µs ± 3% 2225µs ± 2% +259.94% (p=0.008 n=5+5)
NonRecursiveListing/Cockroach/listing_with_prefix-8 1.81ms ± 5% 2.60ms ± 5% +43.96% (p=0.008 n=5+5)
Updates storj/team-metainfo#115
Change-Id: I96e4e7a563b188df478f8489027dc0042469b839
Following the changes made to fix the storage usage graph
on the storagenode dashboard, we added a new
interval_end_time column to the accounting_rollups table.
We noticed a two-day delay in the graph, turns out the sub-query
was wrong due to the conflicting interval_end_time column
in both tables so we have to explicitly state which table
column we are referring to.
Also, set the default for interval_end_time in the accounting
rollups to the start_time if the interval_end_time is null
which will be removed once we backfill the column and alter
it to be a non-nullable column.
Updates https://github.com/storj/storj/issues/4178
Change-Id: Iff32b261d07b6ee219d2b6b6542377f0c54633a1
This is longest metabase at the moment and would nice to speed
up is a bit to improve overal tests execution time.
Change-Id: I86da8e0e593d20024b3ec778cbeab34a4613151f
Database migration tests are rather slow, reduce them to
only the last 10 migrations, which should be sufficient.
Change-Id: Ib9d964fe6ec86ddeeef26c66b6ea9207b7868855
Context cancellation that aborts a non-essential Redis operation must
not be logged as an error because the operation is intentionally
canceled.
We are actually considering them not to be an error in following
operation because of the same reason and we return a RPC canceled status
code.
On the other hand it doesn't make sense to continue if the context is
canceled because although this is a non-essential operation if this one
is canceled due to the context the next one will be canceled for the
same reason, hence, we return earlier.
Change-Id: Ib3331975adeb06367d1ea0a578263ef50ae3f079
Adds USDMicro currency which support fraction of a cent with decimal places
for better billing amounts accuracy.
Adds JSON marshaling and unmarshaling for monetary.Amount, so that it
can be converted to/from JSON.
Change-Id: I034eba120ed23b6ba00b2d81a4f1b9db5f9a203f
The signup_captcha column will hold the captcha scores of new users.
see: https://github.com/storj/storj/issues/5067
Change-Id: Ia322af29a3b5b019b417843272506a3dbd1397e4
This is in response to community feedback that our existing reputation
calculation is too likely to disqualify storage nodes unfairly with
extreme swings up and down.
For details and analysis, please see the data_loss_vs_dq_chance_sim.py
tool, the "tuning reputation further.ipynb" Jupyter notebook in the
storj/datascience repository, and the discussion at
https://forum.storj.io/t/tuning-audit-scoring/14084
In brief: changing the lambda and initial-alpha parameters in this way
causes the swings in reputation to be smaller and less likely to put a
node past the disqualification threshold unfairly.
Note: this change will cause a one-time reset of all (non-disqualified)
node reputations, because the new initial alpha value of 1000 is
dramatically different, and the disqualification threshold is going to
be much higher.
Change-Id: Id6dc4ba8fde1be3db4255b72282207bab5491ca3
Since 6 fields were sent, but only 5 fields were used as input (no burst),
the Segments UI input field was being set to the burst field in the
object, leaving segments empty.
Change-Id: I4e58ed8a36e2022d1d0844e9f9001562db3dcbb8
Adding an index to the timestamp field of the billing transaction table to improve query performance. This should prevent having to do a full table scan when we query for the last billing transaction of a particular source and/or type.
Change-Id: I581f09494cc8662a12efba4302022a07121ba309
Adding an index to the wallet address field of the storjscan wallet table to improve query performance. This should prevent having to do a full table scan when we query for one or more wallet addresses for a given user in our queries.
Change-Id: Ic1b5d06c2258489e5464d186fed5270172f8cba5
This change implements a unit test for ensuring proper
processing of requests and responses by generated API code.
Additionally, this change requires API handlers to explicitly receive
Monkit scopes rather than assuming that `mon` will always exist in the
generated API code's namespace.
Change-Id: Iea56f139f9dad0050b7d09ea765189280c3466f2
Created new modal which shows user their native STORJ token wallet address.
There are QR and copy buttons.
It will be used only in new billing screen.
Change-Id: Icef3c8668c548b779c07fe2b85eb5761cd1221a3
Restored GetObjectLatestVersion and renamed it to GetObjectLastCommitted
Add test cases to cover server-side copy
Closes https://github.com/storj/storj/issues/4866
Change-Id: I343b339a60152b8fb92fda97baf80bd8fe60d631
Jenkins doesn't do a very good job with identifying what has been changed.
While it has a syntax to defined patterns, it compares the current build with the previous build (in case of git-verify it can be a totally different branch) instead of checking the HEAD commit.
This patch introduces shell scripts to do this better:
* It doesn't depend on Jenkins any more
* It can be executed locally
* It can detect web changes properly (see the relation change as an example).
Change-Id: I9d37775e3818c08c4aa96ffb78f84d57f28a2c95
As a reminder
* This counters are for data with high-cardinality
* We have strong upper bound for memory limits
* They can be accessed from /top monitoring interface
Example:
```
curl 172.20.0.10:11111/top
since ~ 2022-08-09T07:45:58Z
auth_request_count project=9094cff8-104e-4956-a367-97ea134b7e06 11.000000
auth_request_buckets 1.000000
auth_request_discarded 0.000000
auth_request_count partner=00000000-0000-0000-0000-000000000000 11.000000
auth_request_buckets 1.000000
auth_request_discarded 0.000000
```
Note: discarded 0 --> we didn't hit the memory limit.
Change-Id: I8db09b4aa61bade55cb324b84b7fbcb8f068c179
The new dashboard currently gets stuck on loading and displays an error when
it fails to get usage data. Failure happens on satelliteDb due to a cockroach transaction error
caused by reading data before using AS OF SYSTEM TIME in the same transaction.
This change reverses the order of daily usage queries to avoid this error.
And hides the loaders on the dashboard if/when an error occurs.
see: https://github.com/storj/storj/issues/5012
Change-Id: I06b6ee434f72242f9b7d21dec7aaf39d1d622f1e
I don't know why the go people thought this was a good idea, because
this automatic reformatting is bound to do the wrong thing sometimes,
which is very annoying. But I don't see a way to turn it off, so best to
get this change out of the way.
Change-Id: Ib5dbbca6a6f6fc944d76c9b511b8c904f796e4f3
We made optimization for segment loop observers to avoid
heavy monkit initialization on each call. It was applied to very
often executed methods. Unfortunately we used wrong monkit
method to track function times. Instead mon.Task we used
mon.Func().
https://github.com/spacemonkeygo/monkit#how-it-works
Change-Id: I9ca454dbd828c6b43ba09ca75c341991d2fd73a8
We noticed that in the system we have undeleted very old pending
objects. General rule is to delete them after some inactivity. Turns
out that all those objects are objects migrated to metabase from
previous DB schema. During this migration we didn't set
zombie_deletion_deadline to any value.
This change takes into account pending objects with zombie deletion
deadline set to nil during zombie deletion process.
I also checked accross all production satellites and youngest pending
objects with nil zombie_deletion_deadline are from 2021 so it is safe
to delete them.
Change-Id: Ie2b6a4b4e203c1750cf8408ee281c0631b263082
Change from DEBUG level to INFO level the logs that the trace request
middleware logs because it looks that we don't log in DEBUG level in
production Satellite API pods.
For making that assumption I searched in the last 7 days logs collected
by Google Logging service for all the Satellite API pods in US1 and it
didn't show any line.
Change-Id: I620009d70d59df46d524c8cee93851bd13eceeee
During an update to the billing DB, there is a special case failure that can occur if multiple updates to the table happen concurrently. In this case, the update would normally fail silently due to the balance constraint during update, and the subsequent insert for a new record fails because the user already exists in the table. The solution for this case, is to simply retry the insert with some limit to prevent infinite loops.
Change-Id: Ibe70fec2c386c25bd2484fe91f49a6a962357706
- Previously unused struct Endpoint.Request now defines the form
of the request body.
- Path parameters (e.g. "id" in "/delete/{id}") are defined in
the Endpoint.PathParams field.
- Endpoint.Params has been renamed to Endpoint.QueryParams to
eliminate confusion.
Change-Id: Ifef51ca2f362c33086f0e43e936d50b0fdd18aa1
Logs out all current user sessions when a password is changed through both the
forgot password and change password methods.
Change-Id: Iaf9b4969aa45441591524906af326b9dec17939f
Split out the function to delete a batch of objects from a bucket, so
that we get metrics which give a rough indication how long this operation
takes.
Part of https://github.com/storj/storj/issues/4957
Change-Id: I20a4ed5894217f4cd0b2f25aee297f0ecda57ab5
Don't terminate the expired objects loop or the zombie objects loop when
there is a DB error when selecting the objects for deleting them because
it isn't critical and the loops will pick them up again in the next
iteration.
The exception is if the DB rows scan method returns an error because
that's a symptom of the passed arguments to the method don't match with
the columns order, number, or type of the query, or there is invalid
data in the DB.
Don't also terminate these loops if the there is a DB error when
deleting the objects because the loops will pick them up in the next
iteration.
Because we don't return those errors now for not terminating the loop,
we have to log them.
Change-Id: I86bcf83d619345255840ae8f3db61620f044d2af
We have enabled the new project dashboard in production. Change the
default to true so that we do not need an explicit configuration in
prod.
Change-Id: I0f93773965283e7b0682f6586685224281cbf78c
We log metainfo object operations and it looks that the log's message
convention is `Object {operation}`, however the `Object Download`
operation didn't match with the actual operation and the one that was
representing it had was `Download Object`.
This commit changes the log's message for the download object operation
according to the other object operations log messages format and fixes
the log message for the Get Object operation.
For finding this I executed the following command at the root of the
repository to obtain the list of lines where we log object operations.
$> ag 'log\.Info\(".*Object.*",' --no-color git:(main)
satellite/metainfo/endpoint_object.go
179: endpoint.log.Info("Object Upload", zap.Stringer("Project ID", keyInfo.ProjectID), zap.String("operation", "put"), zap.String("type", "object"))
336: endpoint.log.Info("Object Download", zap.Stringer("Project ID", keyInfo.ProjectID), zap.String("operation", "get"), zap.String("type", "object"))
557: endpoint.log.Info("Download Object", zap.Stringer("Project ID", keyInfo.ProjectID), zap.String("operation", "download"), zap.String("type", "object"))
791: endpoint.log.Info("Object List", zap.Stringer("Project ID", keyInfo.ProjectID), zap.String("operation", "list"), zap.String("type", "object"))
979: endpoint.log.Info("Object Delete", zap.Stringer("Project ID", keyInfo.ProjectID), zap.String("operation", "delete"), zap.String("type", "object"))
`ag` is a command-line tool similar to `grep`
Change-Id: I9072c5967eb42c397a2c64761d843675dd4991ec
We had a lot of flaky test failures from TestAuth. The error message (WHICH IS NOT VISIBLE IN JEKNINS, only in tests.json):
```
FAIL: TestAuth_Register_NameSpecialChars/Postgres (1.04s)
panic: runtime error: index out of range [0] with length 0 [recovered]
panic: runtime error: index out of range [0] with length 0
goroutine 3473 [running]:
testing.tRunner.func1.2({0x235fe40, 0xc000fe6a08})
/usr/local/go/src/testing/testing.go:1209 +0x36c
testing.tRunner.func1()
/usr/local/go/src/testing/testing.go:1212 +0x3b6
panic({0x235fe40, 0xc000fe6a08})
/usr/local/go/src/runtime/panic.go:1047 +0x266
storj.io/storj/satellite/console/consoleweb/consoleapi_test.TestAuth_Register_NameSpecialChars.func1(0xc001a281a0, 0x289d650, 0xc001a30000)
/var/lib/jenkins/workspace/storj-gerrit-verify/satellite/console/consoleweb/consoleapi/auth_test.go:773 +0x785
storj.io/storj/private/testplanet.Run.func1.1({0x289c770, 0xc0001b8008})
/var/lib/jenkins/workspace/storj-gerrit-verify/private/testplanet/run.go:67 +0x732
storj.io/storj/private/testmonkit.RunWith({0x289c770, 0xc0001b8008}, {0x28d89b0, 0xc001a281a0}, {0x1, {0x0, 0x0}, {0x0, 0x0, 0x0}}, ...)
```
The root cause:
testplanet uses a simulated mail sender which clicks to all the registration links by default (async).
These tests creat links and check the unverified users, but without enough luck the mail sender may already clicks to the link which makes the user verified.
Change-Id: I17cd6bf4ae3e7adc223ec693976bb609370f0c44
Added string length limits for registration partner and promo params.
Limitation added both on client and server sides.
Issue: https://github.com/storj/storj-private/issues/44
Change-Id: Ifae04caad1775e0a8ca72ae7f9abcf0ea5fb564b
Implemented Recaptcha and Hcaptcha for login screen.
Slightly refactored registration page implementation.
Made 2 different login/registration captcha configs on server side to easily swap between captchas independently.
Issue: https://github.com/storj/storj/issues/4982
Change-Id: I362bd5db2d59010e90a22301893bc3e1d860293a
In an effort to distribute load on the reputation database, the
reputation write cache scheduled nodes to be written at a time offset by
the local nodeID. The idea was that no two repair workers would have the
same nodeID, so they would not tend to write to the same row at the same
time.
Instead, since all satellite processes share the same satellite ID
(duh), this caused _all_ workers to try and write to the same row at the
same time _always_. This was not ideal.
This change uses a random number instead of the satellite ID. The random
number is sourced from the number of nanoseconds since the Unix epoch.
As long as workers are not started at the exact same nanosecond, they
ought to get well-distributed offsets.
Change-Id: I149bdaa6ca1ee6043cfedcf1489dd9d3e3c7a163
This change makes the authentication middleware reject any requests
that are not properly authenticated to prevent them from being
passed into endpoint-specific handlers.
Change-Id: I1f6b74f68fc7354e47fb825a128bad968129f420
Update the billing table to use generated IDs, to include the source and status fields, and to add metadata jsonb field that can be used for fields specific to a particular type of billing transaction. Additionally a new table was added to keep track of user balances
Change-Id: Ieb3a63aafd8fe21fc3386bafd43d52081b7d2838
satellite/{payments/billing,satellitedb}: refactor billing DB
Update the billing table to use generated IDs, to include the source and status fields, and to add metadata jsonb field that can be used for fields specific to a particular type of billing transaction. Additionally a new table was added to keep track of user balances
Change-Id: Ieb3a63aafd8fe21fc3386bafd43d52081b7d2838
metabasetest package utils can be used by both tests and benchmarks
if we will use interface TestingT from require package. This change
adjusts metabasettest.CreateObject method
Change-Id: I3c138e2ef9873b804ab5b3402804efa409397a9f
`len(m.attached)` was used without locking.
Also, use gofumpt to make whitespace usage more consistent.
Change-Id: Ifa9deedc8451f0c54e84d6ac3c2bdc1807688989
When a someone tries to create an account with an email that is already
associated with a verified account, send them an email with options to
sign in, create an account on another satellite, or reset password.
Change-Id: I844144d88b7356bd7064c4840c9441347a5368b0
Adding an interval_end_time column to the accounting_rollups table
to keep the last interval_end_time for each daily storage tallies.
Updates https://github.com/storj/storj/issues/4178
Change-Id: If7a8210c5e9fe2fc9df84b137a8b6e3db2471c58
removed segment limit validation and checks in metainfo endpoint and accounting/projectusage
since feature is live and has always has segment limitation now
Resolves: https://github.com/storj/storj/issues/4470
Change-Id: I8cf87cbbc40ac61262f9f05e52573d3ae6410611
With pointerdb listing objects operation was optimized to skip
objects from prefixes for non recursive listing. This change it
adopting this optimiaztion from old code.
Main change is to drop current page results if we detect a prefix
that needs to be skipped and jump with next listing query after this
prefix by setting cursor to "some-prefix(byte('/')+1) which is
effectively "some-prefix0".
Benchmark:
name old time/op new time/op delta
NonRecursiveListing/Postgres/listing_no_prefix-8 960µs ±11% 257µs ±12% -73.19% (p=0.008 n=5+5)
NonRecursiveListing/Postgres/listing_with_prefix-8 945µs ±11% 671µs ±12% -28.97% (p=0.008 n=5+5)
NonRecursiveListing/Cockroach/listing_no_prefix-8 4.31ms ± 8% 1.19ms ± 7% -72.44% (p=0.008 n=5+5)
NonRecursiveListing/Cockroach/listing_with_prefix-8 4.97ms ± 8% 3.35ms ±15% -32.67% (p=0.008 n=5+5)
Fixes https://github.com/storj/team-metainfo/issues/115
Change-Id: Iafdf3600d058abbaf441f792d32a7fc17cc08696
Previously there was no realtime administration of the storage usage
during copies. Now there is.
Closes https://github.com/storj/storj/issues/4719
Change-Id: I0d536bf551d16208116c3aceac89ed590ec473bf
When signing up, a user can opt in to having sales contact them. This
change alters the way this flag is passed to Hubspot and Segment.
Hubspot sends a form submission request to create the user, followed by
a "custom behavioral event" with some additional user info.
Segment sends an "Identify" call followed by a "create user" event.
This change moves "have_sales_contact" to the form submission for
Hubspot, and the Identify call for Segment.
This simplifies the process of applying this field to a contact/user in
Segment and Hubspot.
Change-Id: I5e6871b3926a76fb24f97fb2d835a26720275072
When a user's bandwidth/storage limits are manually set to exceed the
paid tier defaults, attempting to update their project via the satellite
UI (e.g. to change the name/description) would result in an error.
This change modifies the limit checks for updating a project to remove
this issue.
https://github.com/storj/storj/issues/4892
Change-Id: I48853a3289b0ac51587f268a18c1b25743123fcf
Piece deletion service was using KnownReliable method from
overlaycache to get nodes addresses to send delete request.
KnownReliable was always hitting DB because this method was
not using cache. This change is using new DownloadSelectionCache
to avoid direct DB calls.
Change is not perfect because DownloadSelectionCache is not as
precise as KnownReliable method and can select few more nodes
to which we will send delete request but difference should be
small and we can improve it later.
Updates https://github.com/storj/storj/issues/4959
Change-Id: I4c3d91089a18ac35ebcb469a56536c33f76e44ea
Currently we have a significant number of tallies that need to be
deleted together. Add a limit (by default 10k) to how many will
be deleted at the same time.
Change-Id: If530383f19b4d3bb83ed5fe956610a2e52f130a1
An object copy/move is done by 2 DRPC calls. It's possible a new object was uploaded ore moved to the source location between these calls. For copy, in that case the segments end up with the wrong keys. This change adds an explicit check for that by comparing the streamId supplied by the user with the streamId in the database.
Fixes https://github.com/storj/storj/issues/4930
Change-Id: Id600456ce78fb4069b93644828a0b3eb85e23e16
We need to provide the ability to see bucket attribution on the gateway side
so customers can validate if bucket is attributed to them. Extendet metainfo.ListBuckets
request with UserAgent.
Fixes https://github.com/storj/storj/issues/4965
Change-Id: I5624874a7faa14cda06183ad44013e9ebb385b63
Trace all the requests that the HTTP API endpoints receive.
We want to trace them with Monkit because we want to break them down by
request type and response code for seeing if they succeeded or failed.
Also log them with DEBUG level with the IP client.
Change-Id: Ia7b013351c788f131e775818f27091f3014ea861
We retry a GET_REPAIR operation in one case, and one case only (as far
as I can determine): when we are trying to connect to a node using its
last known working IP and port combination rather than its supplied
hostname, and we think the operation failed the first time because of a
Dial failure.
However, logs collected from storage node operators along with logs
collected from satellites are strongly indicating that we are retrying
GET_REPAIR operations in some cases even when we succeeded in connecting
to the node the first time. This results in the node complaining loudly
about being given a duplicate order limit (as it should), whereupon the
satellite counts that as an unknown error and potentially penalizes the
node.
See discussion at
https://forum.storj.io/t/get-repair-error-used-serial-already-exists-in-store/17922/36
.
Investigation into this problem has revealed that
`!piecestore.CloseError.Has(err)` may not be the best way of determining
whether a problem occurred during Dial. In fact, it is probably
downright Wrong. Handling of errors on a stream is somewhat complicated,
but it would appear that there are several paths by which an RPC error
originating on the remote side might show up during the Close() call,
and would thus be labeled as a "CloseError".
This change creates a new error class, repairer.ErrDialFailed, with
which we will now wrap errors that _really definitely_ occurred during
a Dial call. We will use this class to determine whether or not to retry
a GET_REPAIR operation. The error will still also be wrapped with
whatever wrapper classes it used to be wrapped with, so the potential
for breakage here should be minimal.
Refs: https://github.com/storj/storj/issues/4687
Change-Id: Ifdd3deadc8258f34cf3fbc42aff393fa545794eb
Added new email html template.
It is sent when user tries to reset password with unknown or unverified account.
Made a couple of minor config changes.
Issue: https://github.com/storj/storj/issues/4913
Change-Id: I730f48b3478e302d1e38e1f8a27c75f66a8ba6fd
Some nodes were added to the nodes table due to a bug in quic
based storagenode contact code. This is a tool to clean up these nodes.
Delete with batch-size 1k seems to take ~400ms on local CockroachDB.
Change-Id: Ic0c1180528c27952e19c431fc9cc327292a10a5f
Add payments method to payments to DepositWallets interface.
Exposes payments retrieval API for a particular wallet to
other systems such as console billing API.
Change-Id: Ifcb3a35514aab50be00f6360007954980b5d8b38
Use DownloadSelectionCache to avoid querying database for every
download.
This change only addresses downloads from users. The download selection
cache is not currently used for audit and repair.
Change-Id: I96a49e121dac0b4204f97592a63131edabd73fb5
Adding go.mod into node_modules is not sufficient, because npm install
wipes them quite often out. Similarly, when running npm install locally
it will remove it, causing the git state to be dirty.
Rather than having them committed, add them after running npm install.
Change-Id: Iaf21a9c6e198dc31fe50345ec5dee85b44617176
This just cleanup change to unblock libuplink to reorganize types
which are aliases to storj types.
Change-Id: Id3edf13f1b0aef52d7606d545aa7a6594cf8d13f
Add go.mod to node_modules folder, that way Go compiler doesn't
need to scan the node_module directories for any Go code.
Change-Id: I747909416490c847d6b4bfa3438fea66660fcd53
It seems the tests relied on time.Now(), which might cause some
discrepancies in calculations. Use a fixed time.Now() rather than
recalculating.
As a sidefix, remove "Test" prefix from t.Run. These are unnecessary.
Change-Id: I1de903fcf0fcf46fc8e3acf2463e17239b8e3cc6
The MinDownloadTimeout 950ms and delay of 1s were quiet close, possibly
causing flaky behavior in TestVerifierSlowDownload.
Change-Id: I4f6c1554a118b21427357642abe39986fd0af38d
Classify errors related to invalid tokens for activating user accounts
for returning 400 status code rather than 500 status code.
Don't log all the errors with "error" level, only the ones related to
internal server errors and the rest log them with "debug" level because
they pollute the production satellite errors with errors that are
misguiding.
Change-Id: Id2bd737edba8550ce08965b51b8bf2540bd13ca4
Previously copying an object to it's ancestor location (copy of copy)
broke the object and all copies.
This fixes this by calling the existing delete method rather than a
custom one when there is an existing object at the copy destination.
The check for existing object at destination has been moved to an
earlier point in FinishCopy.
metabase.DeleteObject exposes a transaction parameter so that it can be
reused within metabase.
Closes https://github.com/storj/storj/issues/4707
Uplink test at https://review.dev.storj.io/c/storj/uplink/+/7557
Change-Id: I418fc3337fa9f30146ccc1db456af168ae41c326
- instead of closing over the outer err variable, potentially
overwriting some errors or something, declare local variables.
- double check that we got the number of rows we expected to get
and error otherwise. this prevents a possible source of inserting
bogus rows into the database.
Change-Id: I30662be2727afe0a90e4215a182fedc2648d1169
Part of the delete query cause a full table scan of segment_copies. This
slowed down the system. This change should have the same semantics but
improved performance.
Part of https://github.com/storj/storj/issues/4898
Change-Id: I4afe23df05467eafc9c91591f47a7251a0f3dd31
Read the source object and write the destination object in the same
transaction, to prevent breaking the object because it was deleted
simultaneously.
This is probably the root cause of the metainfo loop halting from
2022-06-21 onwards, where 2 objects lost their root_piece_id during
copying.
Part of https://github.com/storj/storj/issues/4930
Change-Id: I9c45d56a7bfb48ecd5f4906ee1cca42922901e90
Returns only user's own projects when we hit GET user endpoint.
Fix for this issue
https://github.com/storj/storj/issues/4820
Change-Id: I546268fa3e5983a72f11f998803da5455c0035b4
Satellite caches the project bandwidth in Redis when it doesn't have it
because was not set or the key expired, however, it doesn't perform the
check and set if not exists in a transaction. It also uses the increase
function which increases the value if it exists otherwise it sets it.
This provokes that multiple concurrent request to the same project may
increase the total project by multiples of the bandwidth usage
registered in the database rather than setting it because they may check
if the key exists before any other has executed the increase and then
the first one executing it will set the value but the others will
increased causing that Redis has a wrong bandwidth usage value which is
N magnitude of the real one and making the satellite to deny the
downloading if it surpasses the project limit.
This commit changes the "update"" project bandwidth usage by an "insert"
but using a Redis function that only sets the value if the key doesn't
exists for solving the increase issue but also not overriding the value
due to may contain updates of other downloading requests which aren't
already registered in the DB.
Change-Id: I33e2fe462930b2fdb4061fc94002bd3544476f94
This test had an effective config.Reputation.AuditCount = 0, meaning all
nodes that had _any_ positive audit results were considered vetted.
Because of that, only one node in the test setup was "new". And that
node was marked as being in GE, so could not be returned by node
selection.
The reason the tests still worked is because of the node selection rule
that says "if there are no new nodes at all, just get all reputable
nodes to satisfy the request".
This commit makes it so half of the nodes are vetted and half new, which
makes the test somewhat more interesting (and means we aren't
concentrating too much on testing details of behavior when AuditCount is
0).
Change-Id: I09157b7dc20ecaddd2a6e60cfe146e9186e3603b
This change fixes the issue where the API generator would produce
different Go code for the same API definition upon each invocation
due to the random nature of map iteration.
Change-Id: I6770a10faf06311c24f541611c25d0b2b0f8e521
To avoid regression with old versions of uplink objects move we need to
remove FinishMoveObject check for key and nonce, in SQL
in FinishMoveObject do check if metadata is nil then
don't set key and nonce. The same UPDATE clause should return metadata and
if metadata != nil we should do the same validation for key and nonce
to avoid putting broken key and nonce while doing move
Resolves: https://github.com/storj/team-metainfo/issues/108
Change-Id: If723dfad899e9235f53559b71ee1c7fe49deb8b8
The users.Update method in the satellitedb package takes a console.User
as an argument. It reads some of the fields on this struct and assigns
the value to dbx.User_Update_Fields. However, you cannot optionally
update only some of the fields. They all will always be updated. This means
that if you only want to update FullName, you still need to read the
user info from the DB to avoid updating the rest of the fields to zero.
This is not good because concurrent updates can overwrite each other.
This change introduces a new struct type, UpdateUserRequest, which
contains pointers for all the fields that are updated by satellite db
users.Update. Now the update method will check if a field is nil before
assigning the value to be updated in the db, so you only need to set the
field you want updated. For nullable columns, the respective field is a
double pointer. This allows us to update a column to NULL if the outer
pointer is not nil, but the inner pointer is.
Change-Id: I27f842d283c2711e24d51dcab622e57eeb9157f1
This change integrates the session management database functionality
with the web application. Claim-based authentication has been removed
in favor of session token-based authentication.
Change-Id: I62a4f5354a3ed8ca80272814aad2448f901eab1b
This change swaps net.IP.IsPrivateIP usages with custom isPrivateIP to
unbreak the build as we want to build for earlier than Go 1.17.
Change-Id: I44badbb487f35e43b8b0433ad0f3b9c87af718d4
There are multiple entries in the users table with the same email
address. This is because in the past users were able to register
multiple times if the email was not verified. This is no longer
the case. If a user tries to register with an unverified email
already in the DB, we send a verification email instead of
creating another entry. However, since these old entries in the
table with duplicate emails were never cleaned up, the email
reminder chore will send out email verification reminders to them.
A single person will get one separate email per entry in the DB
with their email and where status = 0.
Since the multiple entries with the same email problem was solved
a while ago, just add a constraint to GetUnverifiedNeedingReminder
to only select users created after a cutoff. Once the DB is
migrated to remove the duplicate emails, we can remove the cutoff.
github issue: https://github.com/storj/storj/issues/4853
Change-Id: I07d77d43109bcacc8909df61d4fb49165a99527c
TestRollupNoDeletes is very flaky (passes locally but fails in the main branch build).
The exact reason is not clear, but stopping the loop seems to be async, the following lines may not stop the loops immediatelly which is a potential problem:
```
satellitePeer.Accounting.Rollup.Loop.Pause()
satellitePeer.Accounting.Tally.Loop.Pause()
```
Fortunatelly these test check only the database interfaces. Instead of testplanet.Run we can run only satellitedbtest.Run which is faster and more predictable (no background loops).
Other potential problem: comment claims that the default of DeleteTallies is false:
```
// In testplanet the setting config.Rollup.DeleteTallies defaults to false.
```
But it seems to be true (rollup.go):
```
DeleteTallies bool `help:"option for deleting tallies after they are rolled up" default:"true"`
```
This is also fixed in the patch (as we need set it explicit), but TBH it can be fixed with testplanet, too.
Change-Id: Id7ec80d5c069bed2c556f4d001c71aa23fc5af23
If project.UserAgent is set, use this for bucket.UserAgent on bucket
creation. Otherwise, set bucket attribution as before (getting UserAgent
from request headers).
Tests were updated to create the bucket with a different user, added as
a project member. Otherwise, the tests do not catch the bug.
Change-Id: I7ecf79a8eac5957eed361cbea94823190f58b776
The ApplyUpdates() method on the reputation.DB interface acts like the
similar Update() method, but can allow for applying the changes from
multiple audit events, instead of only one.
This will be necessary for the reputation write cache, which will batch
up changes to each node's reputation in order to flush them
periodically.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I44cc47767ea2d9423166bb8fed080c8a11182041
Implemented project delete endpoint for REST API.
Added project usage status check service method to indicate if project can be deleted.
Updated project invoice status check method to indicate if project can be deleted.
Change-Id: I57dc96efb072517144252001ab5405446c9cdeb4
prevent network enumeration by rejecting privateIPs in PingMe and
Checkin endpoints
Closesstorj/storj-private#32
Change-Id: I63f00483ff4128ebd5fa9b7b8da826a5706748c9
We don't have metric to track how many pending objects we have in the
system. This change is using tally objects loop to collect pending
objects per bucket and at the end its combining all buckets values
into single metric for all pending objects in a system.
Change-Id: Iac7a6bfb48854f7e70127d275ea8fdd60c4eb8b7
Add storjscan wallets implementation to the satellite. The wallets interface allows you to add and claim new wallets as called by the API. The storjscan specific implementation of this interface uses a wallets DB to associate the user to a wallet address, as well as a storjscan client to request and associate new wallets to the satellite.
Change-Id: I54081edb5545d4e3ee07cf1cce3d3e87cc00c4a1
Update all the NPM dependencies used by the Admin UI.
The dev dependencies correspond to the ones that are currently used by
an svelte app generated with the last svelte-kit version. They
deprecated some configuration options and changed some svelte
directives.
The only non-dev dependency is also updated to the last published.
Change-Id: I5f2192cab41e00efc3239237f8dc8f3d07816b63
script-src-elem is preferred over script-src in certain scenarios.
If it's absent, then the browser always uses script-src. By adding
script-src-elem it ended up blocking google recaptcha.
Change-Id: I9cf96e71e69054c4a034ca189db84fbe8903a59b
Updated daily project usage query to return correct allocated traffic.
If allocated egress has expired then we return settled egress.
If not then we return allocated egress - dead egress.
Fix for this issue
https://github.com/storj/storj/issues/4563
Change-Id: Ia15a50d3bb8d8cb1106936e17dbe0f1f5a40fa87
Fixed daily usage query returning single bucket usage.
We sum up bucket usages now.
Also fixed https://github.com/storj/storj/issues/4559.
Change-Id: I2eb6299f1ef500d68150879195011b6fbb5f37ed
TRUNCATE requires table recreation which involves 'online schema change' with crdb.
(with psql it might be fater than DROP, that was the motivation of the original change)
`online schema change` is an async operation with crdb and it's eventually very slow therefore we try to avoid it.
This·reverts·commit·15bed0ed0e81d54fe4ffac9928bdf648f5e06ec6.¬
Change-Id: I93e1ab470962be77e3458d74c8787442c9d7bee0
Add the admin API endpoint for disabling an user's multifacdtor
authentication to the satellite admin UI.
Remove a couple of commented code lines too.
Change-Id: Iaee7efe7a3d4d38bdd6541311447a9726806f0f1
