The main motivation is to wrap the bucket DB and metainfo DB, so we
could check if a bucket is empty before applying geofencing config.
Change-Id: I8bac21555e01d51a663fb557bc1acfc8106bc2e1
Add the project ID to error logs messages about not being able to
retrieve and track storage or bandwidth usage.
Some error logs related to these errors already contained the project ID
but others didn't, having it in the ones that didn't make them more
consistent and will provide more info which may be helpful for
troubleshooting them.
Change-Id: Ia9fc707a7f3aff0867645bb941badc199c2bf832
We implemented filtering of system metadata to
reduce DB load in case user will need only list of
objects but we missed that encryption configuration
is needed to decrypt object key.
This change is always including encryption configuration into
list objects results.
Change-Id: Iaf7b3d8441480e3ad787f19a28f1b648584d5f7d
Don't log as an Error when users make request that cannot be fulfilled
because they exceed their storage or bandwidth limits.
Those are not system errors and the service is handling them correctly
and showing them in the logs an "ERROR" is misleading.
Change-Id: Iac642b7e8ba92840bb943192ad0694b5f4930258
To allow for changing limits for new users, while leaving existing users limits as they are, we must store the project limits for each user. We currently store the limit for the number of projects a user can create in the user DB table. This change would also store the project bandwidth and storage limits in the same table.
Change-Id: If8d79b39de020b969f3445ef2fcc370e51d706c6
Change the satellite Admin HTTP server for:
* Embedding the UI assets into the Go binary.
* Serve the UI assets from the embedded file system or from a specific
directory path through a configuration flag, without requiring
authentication but keeping the authentication verification for the API
endpoints.
* Add tests to verify that the UI assets are served without
authentication.
Change-Id: I9003ac96f1ec585a189b67fc1cb315905403d557
Alter satellites DB nodes table to add `disqualification_reason` int column
which contains disqualification type enum of why node has been disqualified.
Change-Id: Ia514557018ca27e1984216dc5004346d59869d16
To resolve problem with lack of ability to set metadata while MPU on
gateway we are adding setting metadata with BeginObject. This
change makes also metadata optional while CommitObject. We need
this functionality to not override metadata set with BeginObject in
case when metadata is not set with CommitObject.
Another reson is that we would like to not set metadata at all if user
didn't specify metadata. At the moment we always setting some bytes
for metadata fields e.g. empty EncryptedMetadata field can have key
and nonce set.
Change-Id: Ifee25b7718eb1f919119db9b698b29d8b5ebe2ec
rollup does not handle virtual drives correctly, use preserveSymlinks to
avoid compilation issues.
Change-Id: I7ae9509572ff4e2e74b059db4909f2e612a1331b
Currently the slow db was sleeping for 1s and the timeout for audit was
1s. There's a slight chance that the timeout won't trigger on such a
small difference.
Increase the slow node sleep to 10x of the timeout.
Hopefully fixes#4268
Change-Id: Ifdab45141b3fc7c62bde11813dbc534b3255fe59
Currently the test threshold for unneeded node checkins are 30s.
The disqualification threshold was at 30s, which means, it was possible
for all the nodes to get disqualified.
Hopefully fixes#4267
Change-Id: I6b0a10c09b7fd90a9729794885c9e7a593781bad
This commit crate the Satellite Admin Web UI v1
* Bootstrap the files installing the project template:
https://github.com/sveltejs/template
* Add the prettier prettier-plugin-svelte NPM packages as dev
dependencies.
* Add an empty prettierrc.toml.
* Transform the project template to use Typescript rather than
Javasript. See: https://github.com/sveltejs/template#using-typescript
* Replace the default favicon by the Storj logo.
* Create components in companion of some Typescript code which allows to
generate a simple HTML page based on an opinionated definition of API.
* Implement all the Admin API client calls in the format that the UI
generator components requires for rendering the UI from them.
Change-Id: I58fa586d68dc8998e5d89db169b8e90204f0a96d
To reduce database load, add option to omit as many object properties
as possible when listing objects.
Change-Id: I817633801b00629a4042d1d1bd2389ee581953de
Removed PathCipher and DefaultSegmentSize from CreateBucketParams
since they are unused anymore and breaks Integration on uplink side
Change-Id: I1393a7f1f436940731aa59edd693043336383290
The UserAgent should be stored as is, with the exception of removing the trailing version from any libuplink user agents
Change-Id: If17ef2fc4b59480a3477300f2585a07d64cc2bf4
Turns out that S3 protocol is setting object metadata with initial
request, in our case it's BeginObject, so we need to modify metabase
methods to accept metadata at the beginning and at the end.
BeginObject methods will set metadata always (niled or not niled).
One additional improvment for metadata fields was introduced and it's
validating fields as optional if EncryptedMetadata was not set.
This change currently doesn't have any implications and it's a base for
other changes. Metadata is not set with BeginObject metainfo endpoint
yet.
Change-Id: I1f768407bc3428500b0d30ee188257420d953001
We had a bug in the stray nodes chore where nodes who had not been seen
in several months were not being DQd. We figured out that this was
happening because we were using two queries: The first to grab
nodes where last_contact_success < some cutoff, the second to DQ them
unless last_contact_success == '0001-01-01 00:00:00+00'. The problem
is that if all of the nodes returned from the first query had
last_contact_success of '0001-01-01 00:00:00+00', we would pass them to
the second query which would not DQ them. This would result in the stray
nodes DQ loop ending since we found a number of nodes to DQ less than the
limit.
The fix: add the "WHERE last_contact_success != '0001-01-01
00:00:00+00'::timestamptz" to the selection query.
Change-Id: I4e60de90b68d8745d641b4467c2b23e0e56f7dff
Even though we want to start charging segment fee instead of object fee,
it's hard for users to understand what a segment is. This PR adds the
object count back in the UI alongside with segment count to help address
the issue.
Change-Id: I92eb42c769d350eba68a72443deffec5c278359c
Currently slower storagenodes can slow down deletion queue.
To make piece deletion faster reduce the maximum time spent in
either dialing or piece deletion requests.
With this change:
* dial timeout is 3s
* request timeout is 15s
* fail threshold is set to 10min
Similarly, we'll mark storage node as failed when the timeout occurs.
The timeout usually indicates that the storagenode is overwhelmed.
Garbage collection will ensure that the pieces get deleted eventually.
Change-Id: Iec5de699f5917905f5807140e2c3252088c6399b
table and drop not null constraint on objects column
Since, we want to move from charging our customers by object count to
segment count, this PR prepares the database to be able to record segments count
instead of objects count for satellite's billing system
Change-Id: Ie91ef354e78d24a268bc1cdc4327c182f733321e
This commit doesn't change any behavior, just organize the code in
different way to make it easier to implement different Criterias
to include nodes. Today we use NodeID and Subnet based selection
but later Criteria can be extended with different kind of
placement rules (like geofencing).
The change nodeselection is used by segment allocaton (upload) and repair
and excludes nodes from an in-memory selection.
Resolves https://github.com/storj/storj/issues/4240
Change-Id: I0c1955fe16a045e3b76d7e50b2e1f4575a7ff095
We needed Redundancy insided sat StreamID when uplink was defining RS values. Now it can be removed.
Change-Id: Id37187493eaa00cf29cb0262a050d71add3deb96
listPendingTransitionShim is a temporary transition shim intended to
make existing API processes keep working when a future DB schema change
is executed. For more explanation, see the message on commit c053bdbd70.
However, the shim has a small bug: it is missing the ORDER BY clause
that appears in the original ListPending method. This transition shim
code won't ever run until we make the DB schema change, so this bug
hasn't hurt anything yet; it's just important that we fix it before the
DB schema change happens.
Change-Id: I5953651583ee236500c2c07141dfc9d690a95118
This update is to set up users being able to register with a promo code added to their account in place of the free tier coupon.
Change-Id: I7badf87937b12664f145520b6dcc4b26fe750407
To make our free tier limits more clear, we will reduce the number of projects allowed from 3 to 1, and increase the storage and bandwidth limit of the free tier from 50 Gb to 150 GB. The total allotments across all projects for a given user are unchanged, just reduced to a single project.
Change-Id: Ic8dddb135f2b83a3f36e2b9fdcb477e351ec137b
We should improve the way how we are handling metabase errors in
metainfo endpoint.
https://storjlabs.atlassian.net/browse/PG-316
Change-Id: I1da6f333546cabf34d6eb1de8e94a3ef455d75d5
Move a variable declaration just before where is used for making easy to
follow the implementation when reading it.
Change-Id: I3e93597956352037a63c5496b11576fdd2c600a6
We don't need column uses_segment_transfer_queue in graceful_exit_progress
as now all exiting nodes are using graceful_exit_segment_transfer_queue and
table graceful_exit_transfer_queue has been dropped.
Change-Id: I4b7c087433f04138cf09bcf8ad3d8de2c185502a
The error message Stripe's API was sending:
"This property cannot be expanded (total_discount_amounts).
You may want to try expanding 'data.total_discount_amounts' instead."
Change-Id: I9f8cea4107d826d837755be2c3c04675a36f3c37
Multipart upload limits added. Last part has no size limit.
Max number of parts: 10000, min part size: 5 MiB
Change-Id: Ic2262ce25f989b34d92f662bde720d4c4d0dc93d
Speedup is done by reducing number of testplanet instances
for tests without changing main test logic.
Change-Id: Ic3849485d37b8ca55c013a45b7191dce65b88b04
Add some testing around adding/replacing promotional coupons and what
the user sees in the UI depending on their coupon status.
Change-Id: Ice6c0a0644d05af0c30c87a93ba963c0bb09e32d
Union query for both reputable and new nodes didn't properly work. The
top level query is required to have an `AS OF SYSTEM TIME` statement as
well.
Change-Id: I8ee6dd5b700c2b1ed2aa562962bfa72be7eec30a
Uplink needs only part of columns we are reading from DB.
To improve performance we should read only those that are
realy needed.
Change-Id: Ib39259318169c46afe5fa4c6ce2184da82e960c8
