On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
This peer will contain our administrative panels.
It's completely separated from our other satellite
processes because it allows better control for restricting
access to it.
Change-Id: Ifca473bee82ff6c680b346918ba32b835a7a6847
In case the endpoint doesn't start, it might end up indefinitely
waiting for it to come up stalling jenkins.
Change-Id: Ib10bf1a25461e7532ec56ca705178bc9a7f85d12
We decided that better name for "scope" will be "access". This change
refactors cmd part of code but don't touch libuplink. For backward
compatibility old configs with "scope" field will be loaded without any
issue. Old flag "scope" won't be supported directly from command line.
https://storjlabs.atlassian.net/browse/V3-3488
Change-Id: I349d6971c798380d147937c91e887edb5e9ae4aa
- also updated ping chore to pick up trust changes
- fixed small typo in blueprint
- fixed flags for storj-sim
- wired up changes to testplanet
Change-Id: I02982f3a63a1b4150b82a009ee126b25ed51917d
the old code to eventually create an api key on a satellite had
some issues. namely, there were some ignored errors, swallowed
errors, incorrect returns of nil errors when there should have
been an error, and it did not handle working against an already
existing database.
this commit fixes the above issues and organizes the code into
a set of methods performing individual steps rather than one big
function. it adds retries and attempts to get existing values
instead of creating them when possible, which means that it will
work if the values already exist. additionally, it removes the
3 second sleep in favor of a bounded retry loop with a small sleep
which improves startup times.
Change-Id: I4de04659e5a62dd3f675fbf3c76f3311c410a03e
for storj-sim to work, we need to avoid schemas in cockroach urls
so we have storj-sim create namespaced databases instead of schemas
and we have the migrate command create the database in the same way
that it would create a schema for postgres. then it works!
a follow up commit will move the creation of the database/schemas
into storj-sim's setup step so that we can avoid doing these icky
creations during normal migration calls. it will also make the
pointerdb have an explicit call to migrate instead of just doing
it every time it's opened.
Change-Id: If69ef5cb96b6866b0438c761bd445afb3597ae5f
* change satellite.Peer name to Core
* change to Core in testplanet
* missed a few places
* keep shared stuff in peer.go to stay consistent with storj/docs
* separate sadb migration, add version check
* update checkversion to do same validation as migration
* changes per CR
* add sa migration to storj-sim
* add different debug port in storj-sim for migration
* add wait for exit for storj-sim migration
* update sa docker entrypoint to support migration
* storj-sim satellite parts all wait for migration
* upgrade golang-migrate/migrate to v4 because bug
* fix go mod tidy
* rm dup api code from sa peer, update storj-sim
* fix for backwards compat tests
* use env var instead of localhost
* changes per CR
* fix env var name
* skip peer for setup
* set up satellite repair run command
* add separated repair process to storj-sim
* add repairer peer to satellite in testplanet
* move api run cmd into api.go
* add satellite run repair to entrypoint
When the contact chore starts running before the monitor service has
provided any useful capacity data, the first outgoing contact has
not-very-helpful data for the satellite. This change causes the contact
chore to wait until capacity data is available. The wait should be quite
short in all reasonable cases: even when a node starts with a lot of
stored pieces and no cached spaceUsedDB data, new data will have been
calculated and cached by the call to
`peer.Storage2.CacheService.Init(ctx)` in `storagenode.cmdRun()` before
`peer.Run(ctx)`.
Change-Id: Ibc26d5c1fc10a23006c00bc3f13ff6cf71f8bf1d
* test that all nodes can check in with all satellites
* keep kademlia config
* add untrusted satellite test
* use getversion
* remove kademlia config changes in test-sim-backwards.sh
* add kademlia flags back to storj-sim storagenode
* reset kademlia flags in storagenode entrypoint
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
What: Change cmd/uplink to use scopes
It moves the fields that will be subsumed by scopes into an explicit legacy section and hides their configuration flags.
Why: So that it can read scopes in from files and stuff
* setup referral route
* referredBy
* add user id
* modify user query
* separate optional field from userInfo
* get current reward on init of satellite gui
* remove unsed code
* fix format
* only apply 0 credit on registration
* only pass required information for rewards
* fix time parsing
* fix test and linter
* rename method
* add todo
* remove user referral logic
* add null check and fix format
* get current offer
* remove partnerID on CreateUser struct
* fix storj-sim user creation
* only redeem credit when there's an offer
* fix default offer configuration
* fix migration
* Add helper function for get correct credit duration
* add comment
* only store userid into user_credit table
* add check for partner id to set correct offer type
* change free credit to use invitee credits
* remove unecessary code
* set to only listen on 127.0.0.1, move static files to same location, better template handling
* handle error
* fix path in storj-sim
* revert template handling changes
* code shouldn't panic on invalid tempalte
* do not rewrite once writing has started
* write correct error code
* use filepath for path handling
* revert change
* fix
* fix mod tidy
* use correct error code for not found, avoid infinite loop on failure
* Set up new port 8090 for in offers
Clean up commented code
Rename offers to offersweb
Remove unused code
Add todos for adding front-end templates
Add middleware for only allow local access
Add comment
Fix linting error
Remove commented code
Update storj-sim
Check request IP against Host IP
Use net pakcage to retrieve IP address
Rename service to marketing
* Add wrapper for all errors
* fix conflicts
* update the config file
* fix linting error
* remove unused packages
* remove global runtime var and add flag to storj-sim for mar static dir
* remove debugging lines
* add new config for test data and check if static dir flag is set before passing to mux
* change 'console' to 'marketing' for test data config
* fix linting errors
* update config flag
* Trigger Jenkins
* Trigger CLA
* uplink: Mark encryption key config field for setup
Set the "setup" property to the `EncryptionConfig.EncrptionKey` for
avoiding to save it in the configuration file.
This field is only meant for using in the command line parameters which
need to use a different encryption key than the one present in the key
file or use it when there is not set any encryption key file path.
* cmd/uplink: Setup non-interactive accept enc key
Change the uplink CLI setup command non-interactive to save the
encryption key into a file when it's passed through the flag
--enc.encryption-key
Previous to this change it wasn't possible to create an key file despite
of that the flag was provided, so it was useless on the setup command.
* cmd/uplink: Reuse logic to read pwd from terminal
Reuse the logic which is already implemented in the pkg/cfgstruct for
reading a password from the terminal on interactive mode, rather than
duplicating it in the setup command.
* cmd/gateway: Use encryption key file flags
The cmd/gateway was still using the `enc.key` configuration field which
doesn't exist anymore and its setup command wasn't using the
`enc.key-filepath` with combination of the `enc.encryption-key` for
generating a file with the encryption key.
This commit update the cmd/gateway appropriately and move to the uplink
package the function used by cmd/uplink to save the encryption key for
allowing to also be used by the cmd/gateway without duplicating the
logic.
* cmd/storj-sim: Adapt gateway config cmd changes
Adapt the cmd/storj-sim to correctly pass the parameters to the
cmd/gateway setup and run command.
* scripts: Don't pass the --enc.encryption-key flag
uplink configuration has changed to only support the
`--enc.encryption-key` flag for setup commands and consequently the
cmd/uplink and cmd/gateway don't accept this flag over other commands,
hence the test for the uplink had to be updated for no passing the
flag on the multiples calls that the test do to cmd/uplink.
* uplink: Remove func which aren't useful anymore
Remove the function which allows to user or load an encryption key
because it isn't needed anymore since the `--enc.encryption-key` flag is
only available for the setup command.
Consequently remove its usage from cmd/uplink and cmd/gateway, because
such flag will always be empty because in case that's passed Cobra will
return an error due to a "unknown flag".
