My understanding is that the nodes table has the following fields:
- `address` field which can be a hostname or an IP
- `last_net` field that is the /24 subnet of the IP resolved from the address
This PR does the following:
1) add back the `last_ip` field to the nodes table
2) for uplink operations remove the calls that the satellite makes to `lookupNodeAddress` (which makes the DNS calls to resolve the IP from the hostname) and instead use the data stored in the nodes table `last_ip` field. This means that the IP that the satellite sends to the uplink for the storage nodes could be approx 1 hr stale. In the short term this is fine, next we will be adding changes so that the storage node pushes any IP changes to the satellite in real time.
3) use the address field for repair and audit since we want them to still make DNS calls to confirm the IP is up to date
4) try to reduce confusion about hostname, ip, subnet, and address in the code base
Change-Id: I96ce0d8bb78303f82483d0701bc79544b74057ac
We missed this in the migration that added the num_healthy_pieces
column. It exists in dbx, but not on the actual satellite table.
Change-Id: If16b5ec2325d56406250298531b3285215188bf3
Metainfo method validateAuth checks things like API key, user permission
and rate limit but at the end all errors were returned as
rpcstatus.Unauthenticated.
Old Metainfo is not touched to avoid backward compatibility issues.
Change-Id: I78eb276210fc50151da58a5c84e13ecd0961da29
Previously, we were simply discarding rows from the repair queue when
they couldn't be repaired (either because the overlay said too many
nodes were down, or because we failed to download enough pieces).
Now, such segments will be put into the irreparableDB for further
and (hopefully) more focused attention.
This change also better differentiates some error cases from Repair()
for monitoring purposes.
Change-Id: I82a52a6da50c948ddd651048e2a39cb4b1e6df5c
New API has limited number of options to configure at the moment. We
should remove unused flags from Uplink CLI and add if needed in the
future.
Change-Id: Icf3f3dadd43cb61a3b408b02d0762aef34425dbf
In production, the satellite is overriding the default repair threshold
(35) to a higher value (52). In some places in the checker and
irreparable processes, the repair threshold on the redundancy scheme is
used in place of the override value. This fixes those cases.
Change-Id: Ie7387217d9fb3886f050b5e5b67be51f276196de
The migration was broken into one migration per table to reduce table locking and reduce the
chances of failure due to SQL timeouts.
Of the 14 fields that lacked time zones, only the 3 named 'interval_start` seemed to have non-UTC data in them.
These fields are fixed in the migration by removing the +00 and adding AT TIME ZONE current_setting('TIMEZONE')
Field with good data are migrated by adding AT TIME ZONE 'UTC'
Note that postgres's timezone() is different than cockroach's timezone() so AT TIME ZONE is used.
https://storjlabs.atlassian.net/browse/SM-104
Change-Id: I410f2f1d7c11b143f17844347f37e6f4b1e70fce
- Previously, checkSegmentAltered only checked for segments that were replaced
but we want to detect all changes to a segment that occurred while an audit was being conducted.
- Fixed a bug where nodes failing audits during reverify for non-piece-hash-verified
segments were not being removed from containment mode.
- Filled in gaps in reverify testing to ensure nodes are properly removed from containment.
Change-Id: Icd96d369278987200fd28581395725438972b292
The billing tests were flaky because some assertions ran before the
storage nodes finish their work.
A new helper function in testplanet has been added to allow to wait for
storage nodes endpoints to finish their work. This function now it's
used in the billing tests for avoiding their flakiness.
This commit closes the ticket:
https://storjlabs.atlassian.net/browse/SM-403
A part of fixing other billing tests flakiness.
Change-Id: Iacb750af435f515c04b1e1d3510a218d184c9abc
uplinks
New libuplink is not storing encryption values in with bucket but old
uplinks are using those values for configuration. If bucket was created
with new libuplink we will send back satellite defaults.
Change-Id: Ie1bf3682847e07b302270b4c4bf1a7219f4bf011
Submit an order limit with a high amount but the order has a low amount of traffic.
Make sure the order amount is used for billing.
Change-Id: I6b6ae26e9b8896f4a3acf530b2f48510b6df89cc
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
Add a test for checking that the billing:
* it doesn't include upload traffic
* it includes download traffic
Change-Id: I1655c15c1fad642f77dd210f2014b2586ae10104
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these requests as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
This change should handle issue we have in older uplinks with incorrect
order of storing pointers.
Change-Id: I86514c95df169e6fbc91b52e5117472cae70cb8b
these tables are used in future commits with respect to the new
storagenode payments code. if we create them now, it will make
backfilling them with historical data easier.
Change-Id: I3c08c9770ec5b2baa38b4f2fd18c2f07746a61c2
Remove the check around consuming an expired serial so that we
have more time to run the migration. It does open a small race
of double spends for entries already counted and then added to
the pending queue right around when they're going to expire and
the consumed serials have already been removed, but that should
be rare if we keep the pending queue empty.
Change-Id: I000b15979b09c67751281ff675ea6c81fc9d22dc
common/pb moved grpc to a separate package common/pb/pbgrpc.
This updates this repository to use it.
Change-Id: I2de2a190688871cf9cb61f7ea511f8a01e264e4e
Add a column to the repair queue table in the satellite db for healthy
piece count. When an item is selected from the repair queue, the least
durable segment that has not been attempted in the past hour should be
selected first. This prevents our repairer from getting stuck doing work
on segments that are close to the repair threshold while allowing
segments that are more unhealthy to degrade further.
The migration also clears the repair queue so that the migration runs
quickly and we can properly account for segment health in future repair
work.
We do not select items off the repair queue that have been attempted in
the past six hours. This was changed from on hour to allow us time to
try a wider variety of segments when the repair queue is very large.
Change-Id: Iaf183f1e5fd45cd792a52e3563a3e43a2b9f410b
This new repair timeout (configured as TotalTimeout) will include both
the time to download pieces and the time to upload pieces, as well as
the time to pop the segment from the repair queue.
This is a move from Github PR #3645.
Change-Id: I47d618f57285845d8473fcd285f7d9be9b4318c8
This change adds two new tables to process orders as fast as we used
to but in an asynchronous manner and with hopefully less storage
usage. This should help scale on cockroach, but limits us to one
worker. It lays the groundwork for the order processing pipeline to
be queue rather than database driven.
For more details, see the added fast billing changes blueprint.
It also fixes the orders db so that all the timestamps that are
passed to columns that do not contain a time zone are converted to
UTC at the last possible opportunity, making it less likely to use
the APIs incorrectly. We really should migrate to include timezones
on all of our timestamp columns.
Change-Id: Ibfda8e7a3d5972b7798fb61b31ff56419c64ea35
