This change accomplishes multiple things:
1. Instead of having a max in flight time, which means
we effectively have a minimum bandwidth for uploads
and downloads, we keep track of what windows have
active requests happening in them.
2. We don't double check when we save the order to see if it
is too old: by then, it's too late. A malicious uplink
could just submit orders outside of the grace window and
receive all the data, but the node would just not commit
it, so the uplink gets free traffic. Because the endpoints
also check for the order being too old, this would be a
very tight race that depends on knowledge of the node system
clock, but best to not have the race exist. Instead, we piggy
back off of the in flight tracking and do the check when
we start to handle the order, and commit at the end.
3. Change the functions that send orders and list unsent
orders to accept a time at which that operation is
happening. This way, in tests, we can pretend we're
listing or sending far into the future after the windows
are available to send, rather than exposing test functions
to modify internal state about the grace period to get
the desired effect. This brings tests closer to actual
usage in production.
4. Change the calculation for if an order is allowed to be
enqueued due to the grace period to just look at the
order creation time, rather than some computation involving
the window it will be in. In this way, you can easily
answer the question of "will this order be accepted?" by
asking "is it older than X?" where X is the grace period.
5. Increases the frequency we check to send up orders to once
every 5 minutes instead of once every hour because we already
have hour-long buffering due to the windows. This decreases
the maximum latency that an order will be reported back to
the satellite by 55 minutes.
Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.
The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.
Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
on node's start checks if any of trusted satellites has GE status "Exited successfully"
if so - trying to delete blobs/satellite folder, so no trash left on SNO.
Change-Id: I566266c84f2a872df54cd01bc2f15a9934f138ed
Part 2 of moving usedserials in memory
* Drop usedserials table in storagenodedb
* Use in-memory usedserials store in place of db for order limit
verification
* Update order limit grace period to be only one hour - this means
uplinks must send their order limits to storagenodes within an hour of
receiving them
Change-Id: I37a0e1d2ca6cb80854a3ef495af2d1d1f92e9f03
See https://storjlabs.atlassian.net/browse/SM-752
These changes allow us to change the log level at runtime through a handler off of the debug endpoint.
Examples of changing the log level on storj-sim
To get the current level for the satellite api process:
curl -XGET 'http://127.0.0.1:10009/logging' --header 'Content-Type: text/plain'
To change the log level:
curl -XPUT 'http://127.0.0.1:10009/logging' --header 'Content-Type: text/plain' --data-raw '{"level":"error"}'
Change-Id: I05d164b290929fa06b6d78c01075ee41f8238044
Currently uploads can cause a lot of IOPS, reduce this by introducing a
in-memory buffer on-top of the file.
Change-Id: I5f4e3e01c0a36258271d180b922107de447bcb59
CreateTables hasn't been quite true for a while now, rename to
MigrateToLatest to be clearer in it's behavior.
Change-Id: Ida48e95122a5d9b7a814e922d3698e00024a2ba7
To improve delete performance, we want to process deletes asynchronously
once the message has been received from the satellite. This change makes
it so that storagenodes will send the delete request to a piece Deleter,
which will process a "best-effort" delete asynchronously and return a
success message to the satellite.
There is a configurable number of max delete workers and a max delete
queue size.
Change-Id: I016b68031f9065a9b09224f161b6783e18cf21e5
Currently storj-sim relies on the log lines to be exactly the same,
when they change it cannot find the necessary information from log.
Change-Id: Ia039915ef3375a7cf60f107b2c05c958de15b6d5
* debug
* traces
* cfgstruct
* process
Package `storj/private/version` will be removed as a separate change.
Change-Id: Iadc40faa782e6225513b28218952f02d9c240a9f
In many cases when a storagenode fails the preflight check, it is due to
test_table existing, which is used to determine read/write capabilities
after the initial schema verification. If preflight ends early due to a
failure or stopped storagenode, it may not get the chance to drop this
table.
This change excludes test_table from the schema comparison to ensure
that it never prevents a storagenode from starting up.
It also adds Preflight DB test for storagenode.
Change-Id: Ib8e71df2e42fda3b2a364fbf7a801891c5831d39
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
When a storagenode begins to run low on capacity, we want to notify
the satellite before completely running out of space. To achieve this,
at the end of an upload request, the SN checks if its available space has
fallen below a certain threshold. If so, trigger a notification to the
satellites.
The new NotifyLowDisk method on the monitor chore is implemented using the
common/syn2.Cooldown type, which allows us to execute contact only once
within a given timeframe; avoiding hammering the satellites with requests.
This PR contains changes to the storagenode/contact package, namely moving
methods involving the actual satellite communication out of Chore and into
Service. This allows us to ping satellites from the monitor chore
Change-Id: I668455748cdc6741291b61130d8ef9feece86458
common/pb moved grpc to a separate package common/pb/pbgrpc.
This updates this repository to use it.
Change-Id: I2de2a190688871cf9cb61f7ea511f8a01e264e4e
Curently, storage nodes only report their capacity to satellites
once per hour. If a node fills up, it will fail all uploads until
the next contact cycle begins. With these changes, at the end of an
upload we check whether the MinimumDiskSpace threshold has been
passed. If so, trigger the monitor chore to update the node's
capacity, then trigger the contact chore to report the new
capacity to the satellites
Change-Id: Ie6aadaade1e2c12c87e03f8ff9059a50121380a0
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
Per default our server address is listening on all IP addresses on the machine.
This caused our preflight check to fail, as it did not have an hostname to lookup.
With this change, we are fine with this and go ahead.
Change-Id: I9eb5c891c099eb35f679d6d7e79ec38bb43b619f
Remove starting up messages from peers. We expect all of them to start,
if they don't, then they should return an error why they don't start.
The only informative message is when a service is disabled.
When doing initial database setup then each migration step isn't
informative, hence print only a single line with the final version.
Also use shorter log scopes.
Change-Id: Ic8b61411df2eeae2a36d600a0c2fbc97a84a5b93
- also updated ping chore to pick up trust changes
- fixed small typo in blueprint
- fixed flags for storj-sim
- wired up changes to testplanet
Change-Id: I02982f3a63a1b4150b82a009ee126b25ed51917d
