this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
Enable a new golangci-lint linter that has been added to the last
release. It reports a very little number of issues so they are fix it in
this commit.
Change-Id: I74fef4779c3f592aae19103fd9f70103586fe24e
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
live accounting used to be a cache to store writes before they are picked up during
the tally iteration, after which the cache is cleared. This created a window in which
users could potentially exceed the storage limit. This PR refactors live accounting to
hold current estimations of space used per project. This should also reduce DB load
since we no longer need to query the satellite DB when checking space used for limiting.
The mechanism by which the new live accounting system works is as follows:
During the upload of any segment, the size of that segment is added to its respective
project total in live accounting. At the beginning of the tally iteration we record
the current values in live accounting as `initialLiveTotals`. At the end of the tally
iteration we again record the current totals in live accounting as `latestLiveTotals`.
The metainfo loop observer in tally allows us to get the project totals from what it
observed in metainfo DB which are stored in `tallyProjectTotals`. However, for any
particular segment uploaded during the metainfo loop, the observer may or may not
have seen it. Thus, we take half of the difference between `latestLiveTotals` and
`initialLiveTotals`, and add that to the total that was found during tally and set that
as the new live accounting total.
Initially, live accounting was storing the total stored amount across all nodes rather than
the segment size, which is inconsistent with how we record amounts stored in the project
accounting DB, so we have refactored live accounting to record segment size
Change-Id: Ie48bfdef453428fcdc180b2d781a69d58fd927fb
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
I also fleshed out consoledb_test.go to do actual inserts and gets to
make sure things were working correctly.
Change-Id: I089bf4c776d15dc8578080e26760bd6dff4beec9
* satellite/console: Add X-Frame-Options and Referrer-Policy security headers
* Update to use CSP instead of XFO and include tardigrade.io
* Make FrameAncestors a config option
* Update satellite-config lock
* Make help text for FrameAncestors better
* update offer once redemption cap has reached
* use transaction to get offer info before insert
* update offer status when redeemable capacity has reached
* fix format
* use pgutil to check constraint error
* change error message
* when there's partner id, we will not require an activation token for creating a new account
* create new token if user has a partner id on creation
* validate partner id first
* fix format
* remove unnecessary code
* display error message instead of reroute
* add more test
* add comments
* add comment
* parent 13dd501042
author Yingrong Zhao <yingrong.zhao@gmail.com> 1563560530 -0400
committer Yingrong Zhao <yingrong.zhao@gmail.com> 1563581673 -0400
parent 13dd501042
author Yingrong Zhao <yingrong.zhao@gmail.com> 1563560530 -0400
committer Yingrong Zhao <yingrong.zhao@gmail.com> 1563581428 -0400
satellite/console: add referral link logic (#2576)
* setup referral route
* referredBy
* add user id
* modify user query
* separate optional field from userInfo
* get current reward on init of satellite gui
* remove unsed code
* fix format
* only apply 0 credit on registration
* only pass required information for rewards
* fix time parsing
* fix test and linter
* rename method
* add todo
* remove user referral logic
* add null check and fix format
* get current offer
* remove partnerID on CreateUser struct
* fix storj-sim user creation
* only redeem credit when there's an offer
* fix default offer configuration
* fix migration
* Add helper function for get correct credit duration
* add comment
* only store userid into user_credit table
* add check for partner id to set correct offer type
* change free credit to use invitee credits
* remove unecessary code
* add credit update in activateAccount
* remove unused code
* fix format
* close reader and fix front-end build
* move create credit logic into CreateUser method
* when there's no offer set, user flow shouldn't be interrupted by referral program
* add appropriate error messages
* remove unused code
* add comment
* add error class for no current offer error
* add error class for credits update
* add comment for migration
* only log secret when it's in debug level
* fix typo
* add testdata
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
* setup referral route
* referredBy
* add user id
* modify user query
* separate optional field from userInfo
* get current reward on init of satellite gui
* remove unsed code
* fix format
* only apply 0 credit on registration
* only pass required information for rewards
* fix time parsing
* fix test and linter
* rename method
* add todo
* remove user referral logic
* add null check and fix format
* get current offer
* remove partnerID on CreateUser struct
* fix storj-sim user creation
* only redeem credit when there's an offer
* fix default offer configuration
* fix migration
* Add helper function for get correct credit duration
* add comment
* only store userid into user_credit table
* add check for partner id to set correct offer type
* change free credit to use invitee credits
* remove unecessary code
* Add partnerID on user creation
* added support for partner ID on create user in consoleql User
* add partner ID to api key if the user creating it has a partner ID associated with it
* updates for consoleal user and userinfo
* add RedeemRewards method
* remove redeem from reward.db
* add redeemable cap check in redeem
* rename offerCap to redeemableCap
* remove redeem test
* update error message
* fix build
* Trigger Jenkins
* use correct credit setting for redeem
* fix comment
* change create qury to get redeemable_cap from offers table
* change referredBy to a pointer in user credit struct
* fix orderdDB methods to take correct args
* update tally to save projectID in correct format
* update var names in splitBucket test
* changes per CR comments
* add dbx queries
* add migration file
* start service
* Add TotalReferredCountByUserId and availableCreditsByUserID
* implement UserCredits interface and UserCredit struct type
* add UserCredits into consoledb
* add setupData helper function
* add test for update
* update lock file
* fix lint error
* add invalidUserCredits tests
* rename method
* adds comments
* add checks for erros in setupData
* change update method to only execute one query per request
* rename vairable
* should return a signal from Update method if the charge is not fully complete
* changes for readability
* prevent sql injection
* rename
* improve readability
* added scopelint and correcte issues found
* corrected scopelint issue
* made updates based on Ivan's suggestions
Most were around naming conventions
Some were false positives, but I kept them since the test.Run could eventually be changed to run in parallel, which could cause a bug
Others were false positives. Added // nolint: scopelint
* first round cleanup based on go-critic
* more issues resolved for ifelsechain and unlambda checks
* updated from master and gocritic found a new ifElseChain issue
* disable appendAssign. i reports false positives
* re-enabled go-critic appendAssign and disabled lint check at code line level
* fixed go-critic lint error
* fixed // nolint add gocritic specifically
What: Changes to support custom usage limit for the project. With this implementation by default project usage limit is taken from configuration flag. If project DB field usage_limit will be set to value larger than 0 it will become custom usage limit and we will be used to verify is limit was exceeded.
Whats changed:
usage_limit (bigint) field added to projects table (with migration)
things related to project usage moved from metainfo endpoint to project usage type
accounting.ProjectAccounting extended with GetProjectUsageLimits() method
Why: We need to have different usage limits per project. https://storjlabs.atlassian.net/browse/V3-1814
