Test external implementation doesn't support OpenAccess
method. This makes imposible to test output of commands like
inspect or share. This implements only basic functionality.
Change-Id: I127ef0bb45a01634bd5265ed80840f8095c72794
The main motivation is to wrap the bucket DB and metainfo DB, so we
could check if a bucket is empty before applying geofencing config.
Change-Id: I8bac21555e01d51a663fb557bc1acfc8106bc2e1
func init() code isn't that well defined and reordering of them
could cause problems when starting the whole process from it.
Change-Id: I4088a0db156ece15354877011a481f6f91c9b332
This change adds the ability to download byte ranges
to uplinkng.
Extended the uplinkng Filesystem interface with Stat
method and an OpenOptions struct as parameter for the
Open method.
Also added a few tests for the ranged download
Change-Id: I89a7276a75c51a4b22d7a450f15b3eb18ba838d4
Add support for node url-s with PEER_URL to help configuring
authservice and gateway.
storj-sim network env SATELLITE_0_URL
Change-Id: I8b595b398007730662f100a4e6b3529cc0a7512a
Currently if the nodes is below the minimum version it will immediately
update to the suggested version, regardless if its eligible from the seed
or not. This change corrects the behaviour to update to the minimum
version only and then properly respect/wait for the rollout to include it.
Updates based on logic here: https://review.dev.storj.io/c/storj/private/+/6187
Change-Id: Ic6c91c48ae9b8a116378b2573fbfca7e7bd5cc32
If the directory doesn't exist, then the first run in a non-migration
setting will error because it cannot create the config file. This
change creates the directory.
Change-Id: I439159c00047e9ae20e139318dad5a047c853253
Usage: from a host for the affected satellite, issue this command
and supply the number of segments that have been permanently lost. For
example, to indicate 2 segments permanently lost:
satellite register-lost-segments 2
If the unthinkable happens and this is necessary to use, it is presumed
that we will also remove the non-recoverable segments from the metainfo
db, so they will not continue to appear as 'temporarily unavailable' to
the repair checker.
The influxQL query for this will probably look something like:
SELECT sum(total) AS "sum_total"
FROM "v3_stats_new"."autogen"."lost-segments"
WHERE time > :dashboardTime: AND "scope" = 'segment-durability'
GROUP BY time(:interval:), "application", "instance"
FILL(null)
Or use the Flux language in order to get the benefit of the
cumulativeSum function:
from(bucket: "v3_stats_new/autogen")
|> range(start: dashboardTime)
|> filter(fn: (r) => r._measurement == "lost-segments"
and r.scope == "segment-durability"
and r._field == "total")
|> group(columns: ["application", "instance"])
|> cumulativeSum()
Change-Id: I73d364937705aa815af7520ab79c00bc2aea09f6
Multipart upload limits added. Last part has no size limit.
Max number of parts: 10000, min part size: 5 MiB
Change-Id: Ic2262ce25f989b34d92f662bde720d4c4d0dc93d
https://storjlabs.atlassian.net/browse/PG-305
we should extend method move of cmd/uplink/cmd/mv.go
if both parameters end with slash -
i should list all files and call move method in loop
parameters:
uplink mv sj://bucket/a/prefix/ sj://new-bucket/a/new-prefix/
Change-Id: Ic24c2af83153ea60ec74393e65736af094877151
Removes database tables and functionality related to our custom
coupon implementation because it has been superseded by the Stripe
coupon and promo code system. Requires implementations of the
payments Invoices interface to return coupon usages along with
invoices.
Change-Id: Iac52d2ff64afca8cc4dbb2d1f20e6ad4b39ddfde
New command for cli to move object to different
location.
uplink mv sj://bucket/your-object sj://bucket/moved-object
Change-Id: I85a4961aa59f250819954e78f20363ac3c570938
Make bucket command was using full location
specified in command line instead only bucket name.
As an addition change contains basic integration tests
with storj-sim.
Change-Id: Ie3b5283468b7fbde0b1333f01dc4fc2a2952e1a1
Currently TextMaxVerifyCount flakes in some tests, try increasing the
sleep time to ensure that things are slow enough to trigger the error
condition.
Also pass ctx to all the funcs so we can handle sleep better.
Change-Id: I605b6ea8b14a0a66d81a605ce3251f57a1669c00
Use multipart upload to upload single object in parts in
parallel. Its using parallelism flag added earlier.
Change-Id: I45b531a5db43c86f0112a5e3bb4a83bc1d65650f
Now that the command has been run on all production satellites
(US1, AP1, EU1), we should not need it again.
Change-Id: I25a4ffb03a7172445d90a04ec539be36c4eb2c8e
Adds support for new uplink method DownloadObjectAt which
gives ability to download single object in parallel.
Change-Id: I8388653429992b0d24c383d17d7e90904203fe77
This command is intended to be run as part of invoice generation - it
iterates over Stripe customers, and applies the free tier coupon to any
customer who doesn't already have a coupon.
This way, we can ensure that all customers have at least the free tier
coupon before and after invoice generation, in case a different coupon
has expired.
Change-Id: I33a4aff9174049f9e051de53ef65298ca65ed688
this makes the distinction between an "access name" and
an "access value" and talks about which is expected for
commands. most are "access name or value".
Change-Id: I43c0043a17d37e89ab5f87388ae9e890a8b59958
this was just supposed to add parallel uploads/downloads
and it does do that, but i then found a bunch of bugs
with respect to path handling that i thought i had under
control. oops.
so this adds a ton of tests and tries to make the logic
in ulloc to be more consistent. almost all of the actual
file handling bits and knowledge happens in cmd_cp now
where it should belong.
additionally, the s3 command has the behavior that if your
bucket has the file s3://bucket/file, then executing
s3 ls s3://bucket/fi returns nothing. this change makes
uplinkng match that behavior even if i don't personally
like it.
a big portion of the weirdness is the concept introduced
that i've named "directoryish", which intends to capture
the behavior that if a user copies a file to that location
then the base name of the source should be appended on
rather than a direct copy. this concept is entirely a
based on the string value and not the actual filesystem
state. hence, the cp command is responsible for checking
if local paths are actually a directory, and adding a
trailing slash if necessary to make them "directoryish".
additionally, the empty key for a bucket and the empty
string for local paths are considered "directoryish".
Change-Id: I9120d18616fd813b29ff81beed4f5993caa99fb6
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
We made decision to avoid satellite shutdown when segment loop
will return error. Loop still can reeturn error but it will be logged
and we will make monitoring/alert around that error.
Change-Id: I6aa8e284406edf644a09d6b1fe00c3155c5430c9
There are some users in our QA satellite which are no longer in Stripe,
and there are some users in Stripe which are not on our QA satellite.
This change allows us to test the paid tier conversion script in QA
despite these problems.
Change-Id: If94c9e882327841d1fd294d75fd302e6a7feee41
To be sure we are comparing the same set of objects
and segments lets ignore objects and segments created
after processing was started.
Segmets without objects cannot be created in normal
way so we will have them only if we broke something in
the past.
Change-Id: I96c07caf9e5091775d4dc8dfc0fef2b08b87957c
This tool has two commands to execute. One is to 'report'
orphaned segments. Second to 'delete' orphaned
segments.
To find such segments tool is first finding all unique
segment stream ids. As a next step its removing from this
list stream ids of existing objects. What is left is a list of
orphaned segments.
Change-Id: I4a0ae3ad0b10a8d16572bfd22ac92cfa15ca19b3
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
The auth service has no way to remove access grant registrations that
lack expiration dates. We want to encourage people to set them, so as
to slow the rate at which the auth service DB fills up.
Change-Id: I1ccf629cd995dc184d2d90333166eab34d34ae07
We have implemented the paid tier, but it currently only handles new
users entering paid tier. It does not convert users who have already
added a credit card previously. We still want to convert these users'
project limits. This billing command can be run once to convert all old
customers with a credti card. Afterwards, we should be able to safely
remove it.
Change-Id: Ia496580b8e72ef436375b74f590fe57cca704fa8
