This small feature will give us ability to test pending_objects table
without enabling it globally.
Change-Id: I802f45987ad329f94adfc0f02957c802b21d8251
Allow a longer encrypted key length to reduce 'key length is too big'
errors in gateway-mt. Gateway is enforcing an unencrypted key length
of 1024 bytes but when encrypted some keys are exceeding the current
limit.
Updates https://github.com/storj/gateway-mt/issues/335
Change-Id: I38a0fbb0843fd782aeadca85f9a202821421b5a2
Change is adjusting BeginObjectNextVersion to create pending object in
`pending_objects` or `objects` table depends on configuration. This is
first change to move pending objects from objects table.
General goal is to support both tables until `objects` table will be
free from pending objects. Whenever it will be needed code will be
supporting both tables at once.
To be able to decide if we need to use `pending_objects` table or
`objects` table we extend satellite stream id to keep that information
for later use.
BeginObjectExactVersion will be not adjusted because at the moment it's
used only in tests.
Part of https://github.com/storj/storj/issues/6046
Change-Id: Ibf21965f63cca5e1775469994a29f1fd1261af4e
..instead of using segment_copies and ancestor_stream_id, etc.
This bypasses reference counting entirely, depending on our mark+sweep+
bloomfilter garbage collection strategy to get rid of pieces once they
are no longer part of a segment.
This is only safe to do after we have stopped passing delete requests on
to storage nodes.
Refs: https://github.com/storj/storj/issues/5889
Change-Id: I37bdcffaa752f84fd85045235d6875b3526b5ecc
Allow a longer encrypted key length to reduce 'key length is too big'
errors in gateway-mt. Gateway is enforcing an unencrypted key length
of 1024 bytes but when encrypted some keys are exceeding the current
limit.
Updates https://github.com/storj/gateway-mt/issues/335
Change-Id: Ib02e2064c42e96b9d59936905832d8dd6068d2c7
Allow a longer encrypted key length to reduce 'key length is too big'
errors in gateway-mt. Gateway is enforcing an unencrypted key length
of 1024 bytes but when encrypted some keys are exceeding the current
limit.
updates https://github.com/storj/gateway-mt/issues/335
Change-Id: I861a2313e558c9f7d39569d21c7a3d429c83575c
We would like to have ability to limit burst uploads to the single
object (the same location). This change we are limiting such upload to
one per second.
Change-Id: Ib9351df1017cbc07d7fc2f846c2dbdbfcd3a360c
This flag was in general one time switch to enable versions internally.
New we can remove it as it makes code more complex.
Change-Id: I740b6e8fae80d5fac51d9425793b02678357490e
We tested new upload flow (with multiple versions) to fix inconsistency
while uploading object on QA/EUN1/SLC. Now we would like to enable it
for all satellites by default. Tests required small adjustments.
Fixes https://github.com/storj/storj/issues/5283
Change-Id: I0d53c041abebc0d182ba5a88bb1dac906c29caf0
New flag 'MultipleVersions' was not correctly passed from metainfo
configuration to metabase configuration. Because configuration was
set correctly for unit tests we didn't catch it and issue was found
while testing on QA satellite.
This change reduce number of places where new metabase flags needs
to be propagated from metainfo configuration to avoid problems with
setting new flags in the future.
Fixes https://github.com/storj/storj/issues/5274
Change-Id: I74bc122649febefd87f665be2fba628f6bfd9044
We will introduce new logic for creating new objects (BeginObject).
Instead of using single version internally (1) we will be selecting first
available version during object creation. Because we need to be sure
that everything is wired up correctly we need a feature flag to be
able to control if new feature is enabled.
Change-Id: If0f8496397130811f43bf9db9fdcc2b30cd2e4ca
removed segment limit validation and checks in metainfo endpoint and accounting/projectusage
since feature is live and has always has segment limitation now
Resolves: https://github.com/storj/storj/issues/4470
Change-Id: I8cf87cbbc40ac61262f9f05e52573d3ae6410611
Initial space used for pieces is calcualted, not retrieved
from storage nodes and at the end of test we are deleting
also copies that become ancestors to verify that all data
was removed from storage nodes.
Change-Id: I9804adb9fa488dc0094a67a6e258c144977e7f5d
We would like to disable in production those parts of code
which are now mixed with new server-side copy logic.
Change-Id: Iff50682bc9545207330f58dd19b5eee53d404d7f
Currently the rate limit has kept per satellite api endpoint.
Since we run 9+ api endpoints in production, we do not need
a limit of 1000, since the intention was to allow 1000 total.
This change reduces the effective limit given 9 instances
down to 900, which should be close enough.
Change-Id: Ia579149ccc3a12e8febe0cfd5586b8a39de40f55
We want to be able to limit the number of segments per project for users.
To limit this we need to check limit value associated with project
and value of used segments already in BeginMoveObject, BeginMoveSegment
and increment cache segments usage after each CommitSegment call.
Resolves https://github.com/storj/team-metainfo/issues/1
Change-Id: I6290e67c095a174b9d101c4521802d9bfe0453b8
Multipart upload limits added. Last part has no size limit.
Max number of parts: 10000, min part size: 5 MiB
Change-Id: Ic2262ce25f989b34d92f662bde720d4c4d0dc93d
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
The system and database time may drift. We should use database time for
absolute "as of system time" to ensure that it's not newer than the
current database time. When the "as of system time" is in the future,
then the query will fail.
Change-Id: I5423f6aaad966ca03a76b5ff805bfba932e44a51
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
We were deleting expired objects by directly executing a delete query.
With this change, we first select the objects to be deleted and then
delete them (as recommended by cockroachdb for deleting using a non indexed
column).
Change-Id: Ied150fbdc7031a343a74e0b9dab316598188ef66
ListSegments loads all the segment data into memory, however this can
add up to a lot of data with inline segments and large objects.
Change-Id: I037738f0e70b810ecbea7d83b00ea7ca9eb90c7a
Iterate over streams/segments rather than loading all of them into
memory. This reduces the memory overhead of metainfo loop.
Change-Id: I9e98ab98f0d5f6e80668677269b62d6549526e57
This method will be used only with metainfo loop and we need to customize query to consume less memory.
Change-Id: Iaa97392f483c5df5609d501b3847b80eb1ea2583
We want to have custom loop iterator to avoid reading all object fields to reduce memory consumpion. This is first step to just rename existing iterator to IterateLoopObjects.
Change-Id: I8878ff21a49ba224db2d497cc8f9076e75c7609e
Segments are not read in batches. For each batch of objects
we are reading all segments for those objects.
Change-Id: Idaf19bbe4d4b095065d59399dd326e22c57499a6
ListAllBuckets could skip buckets when the total number of buckets
exceeds list limit. Replace listing buckets with looping directly
on the objects table.
Change-Id: I43da2fdf51e83915a7854b782f0e9ec32c373018
