To save load on DNS servers, the repair code first tries to dial the
last known good ip and port for a node, and then falls back to a DNS
lookup only if we fail to connect to the last known good ip and port.
However, it looks like we are seeing errors during the client stream
Close() call (probably due to quic-go code), and those are classified
the same as errors encountered during Dial. The repairer code sees this
error, assumes that we failed to contact the node, and retries- but
since we did actually succeed in connecting the first time around, this
results in submitting the same order limit (with the same serial number)
to the storage node, which (rightfully) rejects it.
So together with change I055c186d5fd4e79560f67763175bc3130b9bc7d2 in
storj/uplink, this should avoid the double submission and avoid dinging
nodes' suspension scores unfairly.
See https://github.com/storj/storj/issues/4687.
Also, moving the testsuite directory check up above check-monkit in the
Jenkins Lint task, so that a non-tidy testsuite/go.mod can be recognized
and handled before everything breaks weirdly and seemingly randomly
later on.
Change-Id: Icb2b05aaff921d0af6aba10e450ac7e0a7bb2655
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
The "satellite fetch-pieces" command allows a satellite operator to
fetch as many pieces of a segment as possible, along with their
original order limits and hashes as provided by the storage nodes. The
fetched pieces and associated info will be stored on in a specified
folder as they are, rather than being RS-decoded or decrypted.
It is hoped that this will allow easier debugging of certain one-off
problems we've observed in the wild.
Change-Id: I42ae0e9ef0023538e42473a9be5a2460a3ac0f3a
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
If satellite can't find enough nodes to successfully download a segment,
it probably is not the fault of storage nodes.
Change-Id: I681f66056df0bb940da9edb3a7dbb3658c0a56cb
work
Since we have changed the repair worker to also mark a node as audit
failure if they return a not found error, we should ignore expired
segments when possible
Change-Id: Ie6a677e1d7b234e93965c736d05950440236653c
Update repair tests to check if audit score increases for nodes
that successfully send pieces during successfull and failed repairs.
Change-Id: Ie6abbde6155ab4697d209366c9fa497e731756e9
When we can't complete an audit or repair, we need more information about
what happened during each individual share/piece download.
In audit, add the number of offline, unknown, contained, failed nodes to
the error log. In repair, combine the errors from each download and add
them to the error log.
Change-Id: Ic5d2a0f3f291f26cb82662bfb37355dd2b5c89ba
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
This change adds dedicated methods on metabase.Pieces to be able to add, remove pieces and also to check duplicates.
Change-Id: I21aaeff40c017c2ebe1cc85a864ae546754769cc
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Piece hash verification failures during repair download are considered
audit failures, but we are not logging these occurrences. Now we log
them.
Change-Id: If456cebcfda6af7a659be3d1fc74448e681fb653
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
At some point we might try to change original segment RS values and set Pieces according to the new values. This change adds add NewRedundancy parameter for UpdateSegmentPieces method to give ability to do that. As a part of change NewPieces are validated against NewRedundancy.
Change-Id: I8ea531c9060b5cd283d3bf4f6e4c320099dd5576
It's impossible to time correctly this check. The segment may expire
just at the time we upload the repaired pieces to new storage nodes.
They will reject this as expired and the repair will fail.
Also, we penalize storage nodes with audit failure only if they fail
piece hash verification, i.e. return incorrect data, but only if they
have already deleted the piece.
So, it would be best if the repair service does not care about object
expiration at all. This is a responsibility of another service.
Removing this check will also simplify how we migrate this code
correctly to the metabase.
Change-Id: I09f7b372ae2602daee919a8a73cd0475fb263cd2
Rather than having a single repair override value, we will now support
repair override values based on a particular segment's RS scheme.
The new format for RS override values is
"k/o/n-override,k/o/n-override..."
Change-Id: Ieb422638446ef3a9357d59b2d279ee941367604d
Firstly, this changes the repair functionality to return Canceled errors
when a repair is canceled during the Get phase. Previously, because we
do not track individual errors per piece, this would just show up as a
failure to download enough pieces to repair the segment, which would
cause the segment to be added to the IrreparableDB, which is entirely
unhelpful.
Then, ignore Canceled errors in the return value of the repair worker.
Apparently, when the worker returns an error, that makes Cobra exit the
program with a nonzero exit code, which causes some piece of our
deployment automation to freak out and page people. And when we ask the
repair worker to shut down, "canceled" errors are what we _expect_, not
an error case.
Change-Id: Ia3eb1c60a8d6ec5d09e7cef55dea523be28e8435
The current monkit reporting for "remote_segments_lost" is not usable for
triggering alerts, as it has reported no data. To allow alerting, two new
metrics "checker_segments_below_min_req" and "repairer_segments_below_min_req"
will increment by zero on each segment unless it is below the minimum
required piece count. The two metrics report what is found by the checker
and the repairer respectively.
Change-Id: I98a68bb189eaf68a833d25cf5db9e68df535b9d7
With the new overlay.AuditOutcome type for offline audits, the
IsUp field is redundant. If AuditOutcome != AuditOffline, then
the node is online.
In addition to removing the field itself, other changes needed
to be made regarding the relationship between 'uptime' and 'audits'.
Previously, uptime and audit outcome were completely separated. For
example, it was possible to update a node's stats to give it a
successful/failed/unknown audit while simultaneously indicating that
the node was offline by setting IsUp to false. This is no longer possible
under this changeset. Some test which did this have been changed slightly
in order to pass.
Also add new benchmarks for UpdateStats and BatchUpdateStats with different
audit outcomes.
Change-Id: I998892d615850b1f138dc62f9b050f720ea0926b
