Satellite now is keeping RS values for uplink but old uplinks were using
default bucket settings. Because of that we need to override buckets
settings with satellite settings to avoid breaking older uplinks.
Change-Id: Ia1068db70e4adbf741c5e81d27d9e39799049c22
before dbx would generate a compilcated blob of conditions that
encoded a row comparison, which only optimized to an index seek
on cockroachdb. this means that sqlite and postgres both had
quadratic behavior on paged queries of this form. instead, use
the implicit row construction feature supported in all of the
databases to do paged support so that they all optimize well.
Change-Id: Iac8703929ba2a59ee3ffa619b916d12663422887
This reverts commit 8772867855.
for uplink versions v0.25.0 through v0.30.7, there's a bug with multiplesegment upload
where the last segment is inline caused by this commit.
Change-Id: If375e186b23265586caf08991c25980e99f3cc1a
Change is adding object deletion to BeginObject request (before upload).
Now when satellite controls deletion we can move deletion before upload
to satellite. This change improves two things:
* no need for additional request to delete object before upload (need
one more change to storj/uplink)
* fix an issue with lack of permissions to upload if caveat allows only
for writing (e.g. disallow deletes but allows to write)
https://storjlabs.atlassian.net/browse/V3-3362
Change-Id: Ic453146298cdd302df290c532123731a3f99e38e
The old migration was not working. It was updateding pending (status 0)
and failed (status -1) to completed (status 100).
Change-Id: I808ff3cc692fe6c698ce26a8b411b134e67b752b
For the last few month we had no issues with order submission. I would
call it stable and now it is time to risk a lower expire time. This will
increase the database performance on the satellite and it will reduce
the delay for billing.
The long term goal is 6h but for that step we need to change graceful
exit first. At the moment storage nodes would get disuqlaified for not
transfering alle pieces in less than 6 hours.
Change-Id: I421a2c2421c5374c4e706e2338f1c2161fedc14c
paths are organized as follows:
project_id/segment_index/bucket_name/encrypted_key
so by picking parts[0] and parts[1], we were using the segment
index instead of the bucket name, causing bandwidth to be
accounted for incorrectly. additionally, we were using the
PUT action instead of the PUT_GRACEFUL_EXIT action, causing
the data to be charged incorrectly. we use PUT_REPAIR for
now because nodes won't accept uploads with PUT_GRACEFUL_EXIT
and our tables need migrations to handle rollups with it.
Change-Id: Ife2aff541222bac930c35df8fcf76e8bac5d60b2
Enable a new golangci-lint linter that has been added to the last
release. It reports a very little number of issues so they are fix it in
this commit.
Change-Id: I74fef4779c3f592aae19103fd9f70103586fe24e
Change DeleteObjectPieces for deleting the segments' pointers of an
object in a reverse order.
Last segment: L
N: total number of segments
Deleting in reverse order is: L, n-1 to 0
Deleting in reverse order makes BeginDeleteObject usable to delete
partially uploaded objects that were interrupted (e.g. upload
cancellation).
With this change, the uplink upload cancellation, can be changed to use
BeginDeleteObject to cleanup already uploaded segments without having to
retrieve orders and dial every single node which stored a piece.
Ticket: https://storjlabs.atlassian.net/browse/V3-3525
Change-Id: Ieca6fd3801c4b71671811cb5f08a99d5146928a6
A uuid.UUID is an array of bytes, and slicing it refers to the
underlying value, much like taking the address. Because range
in Go reuses the same value for every loop iteration, this means
that later iterations would overwrite earlier stored project
ids. We fix that by making a copy of the value before slicing it
for every loop iteration.
Change-Id: Iae3f11138d11a176ce360bd5af2244307c74fdad
A few variables were not renamed to the new standard piecesTotal and
piecesContentSize, so it was unclear which value was being used. These
have been updated, and some comments made more thorough.
Change-Id: I363bad4dec2a8e5c54d22c3c4cd85fc3d2b3096c
This change updates the storagenode piecestore apis to expose access to
the full piece size stored on disk. Previously we only had access to
(and only kept a cache of) the content size used for all pieces. This
was inaccurate when reporting the amount of disk space used by nodes.
We now have access to the total content size, as well as the total disk
usage, of all pieces. The pieces cache also keeps a cache of the total
piece size along with the content size.
Change-Id: I4fffe7e1257e04c46021a2e37c5adc6fe69bee55
Currently we risk losing pending bandwidth rollup writes even on a clean
shutdown. This change ensures that all pending writes are actually
written to the db when shutting down the satellite.
Change-Id: Ideab62fa9808937d3dce9585c52405d8c8a0e703
Currently storage tests were tied to the default lookup limit.
By increasing the limits, the tests will take longer and sometimes
cause a large number of goroutines to be started.
This change adds configurable lookup limit to all storage backends.
Also remove boltdb.NewShared, since it's not used any more.
Change-Id: I1a052f149da471246fac5745da133c3cfc27582e
Currently Cockroach DB setup takes a significant amount of time.
This flattens the database setup into a single query,
which improves the test time significantly.
The migration tests still test each migration separately.
Change-Id: Iaca16f34a6af3926fa2b5ebf618f939fd59460b3
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
Since incoming times may be in any time zone, and we want the output
to be in UTC and for them to have 00:00:00 hours, minutes and seconds
we first convert the incoming timestamp to UTC before doing the
truncate to the day and adding a day.
Because the old code always returned a timestamp that was in the
future, this is just for efficiency.
Change-Id: Ie692d47bca8691e73852c822d5c56cf8773d99b4
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these request as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
Change-Id: If170e78c8410f5ba5916cbff6a29b9221db9ce2e
Replace all the remaining uses of sql.DB with tagsql.DB to
fix issues with context cancellation.
Introduce tagsql.Open which helps to get rid of all tagsql.Wrap-s.
Use tagsql in cockroachkv and postgreskv.
Change-Id: I8946d203341cb85a25976896fc7881e1f704e779
Not having a skew caused an issue where:
1. Uplink calls "begin segment", where segment isn't committed to the
database.
2. Uplink stores piece X to the storage node A with timestamp 1.
3. Satellite runs garbage collection with timestamp 2.
4. Satellite sends retain request to storage node A with timestamp 2.
5. Storage node A deletes piece X, because 1 < 2.
6. Uplink calls "commit segment" with storage node A in it.
7. Download of segment fails, because A doesn't have piece X.
In production this is not an issue since the MaxTimeSkew is 72h by
default.
Change-Id: Id87ca3ddc44103dcd85d031b1367168c014b8e7b
Also added temporary types withRebind and withTagTx,
which will be later removed. Currently they help to avoid
changing the whole codebase at the same time.
Change-Id: I7f07ba8f4709a23a463bfa67464628665a05808f
