* change overlay.UpdateStats to allow a third audit outcome. Now it can
handle successful, failed, and unknown audits.
* when "unknown audit reputation"
(unknownAuditAlpha/(unknownAuditAlpha+unknownAuditBeta)) falls below the
DQ threshold, put node into suspension.
* when unknown audit reputation goes above the DQ threshold, remove node
from suspension.
* record unknown audits from audit reporter.
* add basic tests around unknown audits and suspension.
Change-Id: I125f06f3af52e8a29ba48dc19361821a9ff1daa1
My understanding is that the nodes table has the following fields:
- `address` field which can be a hostname or an IP
- `last_net` field that is the /24 subnet of the IP resolved from the address
This PR does the following:
1) add back the `last_ip` field to the nodes table
2) for uplink operations remove the calls that the satellite makes to `lookupNodeAddress` (which makes the DNS calls to resolve the IP from the hostname) and instead use the data stored in the nodes table `last_ip` field. This means that the IP that the satellite sends to the uplink for the storage nodes could be approx 1 hr stale. In the short term this is fine, next we will be adding changes so that the storage node pushes any IP changes to the satellite in real time.
3) use the address field for repair and audit since we want them to still make DNS calls to confirm the IP is up to date
4) try to reduce confusion about hostname, ip, subnet, and address in the code base
Change-Id: I96ce0d8bb78303f82483d0701bc79544b74057ac
Previously, we were simply discarding rows from the repair queue when
they couldn't be repaired (either because the overlay said too many
nodes were down, or because we failed to download enough pieces).
Now, such segments will be put into the irreparableDB for further
and (hopefully) more focused attention.
This change also better differentiates some error cases from Repair()
for monitoring purposes.
Change-Id: I82a52a6da50c948ddd651048e2a39cb4b1e6df5c
In production, the satellite is overriding the default repair threshold
(35) to a higher value (52). In some places in the checker and
irreparable processes, the repair threshold on the redundancy scheme is
used in place of the override value. This fixes those cases.
Change-Id: Ie7387217d9fb3886f050b5e5b67be51f276196de
The migration was broken into one migration per table to reduce table locking and reduce the
chances of failure due to SQL timeouts.
Of the 14 fields that lacked time zones, only the 3 named 'interval_start` seemed to have non-UTC data in them.
These fields are fixed in the migration by removing the +00 and adding AT TIME ZONE current_setting('TIMEZONE')
Field with good data are migrated by adding AT TIME ZONE 'UTC'
Note that postgres's timezone() is different than cockroach's timezone() so AT TIME ZONE is used.
https://storjlabs.atlassian.net/browse/SM-104
Change-Id: I410f2f1d7c11b143f17844347f37e6f4b1e70fce
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
Add a column to the repair queue table in the satellite db for healthy
piece count. When an item is selected from the repair queue, the least
durable segment that has not been attempted in the past hour should be
selected first. This prevents our repairer from getting stuck doing work
on segments that are close to the repair threshold while allowing
segments that are more unhealthy to degrade further.
The migration also clears the repair queue so that the migration runs
quickly and we can properly account for segment health in future repair
work.
We do not select items off the repair queue that have been attempted in
the past six hours. This was changed from on hour to allow us time to
try a wider variety of segments when the repair queue is very large.
Change-Id: Iaf183f1e5fd45cd792a52e3563a3e43a2b9f410b
This new repair timeout (configured as TotalTimeout) will include both
the time to download pieces and the time to upload pieces, as well as
the time to pop the segment from the repair queue.
This is a move from Github PR #3645.
Change-Id: I47d618f57285845d8473fcd285f7d9be9b4318c8
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
everyone was importing it as dbx anyway. why should it be
named satellitedb? so yeah just pass the "-p dbx" flag.
Change-Id: I5efa669f4f00f196b38a9acd0d402009475a936f
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb
Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
Remove direct dependency on uplink.RSConfig, this simplifies
moving the config file without introducing weird dependencies.
Change-Id: I7fd2a145401e0205d7047631df9d2810241efeec
* satellite/nodeselection: dont select nodes that havent checked in for a while
* change testplanet online window to one minute
* remove satellite reconfigure online window = 0 in repair tests
* pass timestamp into UpdateCheckIn
* change timestamp to timestamptz
* edit tests to set last_contact_success to 4 hours ago
* fix syntax error
* remove check for last_contact_success > last_contact_failure in IsOnline
We don't use reverse listing in any of our code, outside of tests, and
it is only exposed through libuplink in the
lib/uplink.(*Project).ListBuckets() API. We also don't know of any users
who might have a need for reverse listing through ListBuckets().
Since one of our prospective pointerdb backends can not support
backwards iteration, and because of the above considerations, we are
going to remove the reverse listing feature.
Change-Id: I8d2a1f33d01ee70b79918d584b8c671f57eef2a0
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* update audit status as failed for nodes that failed piece hash verification
* remove comment
* fix lint error
* add test
* fix format
* use named return value for Get
* add comments
* add more better comment
* format
* add outline for ECRepairer
* add description of process in TODO comments
* begin download/getting hash for a single piece
* verify piece hash and order limit during download
* fix download piece
* begin filling out ESREpair. Get
* wip move ecclient.Repair to ecrepairer.Repair
* pass satellite signee into repairer
* reconstruct original stripe from pieces
* move rebuildStripe()
* calculate piece size differently, increment successful count
* fix shares slices initialization
* rename stripeData to segment
* do not pad reader in Repair()
* temp debug
* create unsafeRSScheme
* use decode reader
* rename file name to be all lowercase
* make repair downloader async
* declare condition variable inside Get method
* set downloadAndVerifyPiece's in-memory buffer to be share size
* update unusedLimits var
* address comments
* remove unnecessary comments
* move initialization of segmentRepaire to be outside of repairer service
* use ReadAll during download
* remove dots and move hashing to after validating for order limit signature
* wip test
* make sure files exactly at min threshold are repaired
* remove unused code
* use corrput data and write back to storagenode
* only create corrupted node and piece ids once
* add comment
* address nat's comment
* fix linting and checker_test
* update comment
* add comments
* remove "copied from ecclient" comments
* add clarification comments in ec.Repair
* Added batch update stats for recordAuditSuccessStatus
* Added batch update stats to recordAuditFailStatus
* added configurable batch size
* build individual update/delete statements so the statements can be batched into 1 call to the DB
* notified #config-changes channel and ran make update-satellite-config-lock
* updated tests to use batch update stats
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
