We added expires_at column to segments table and now
we need to populate this column while committing segment.
We still need to migrate existing segments with
separate tool.
Change-Id: Ibac8c63d97201dd98cc2cb9db385f4cb73bc3f7e
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
We want to move some of current metainfo loop observers to
segment loop. This change adds new service, similar to metainfo
loop but which is iterating only over segments.
Change-Id: I67f7f461781723a4476e2b83377f31736d7c4870
Previously the object range was not used for calculating order limit.
This meant that even if you were downloading only a small range it would
account bandwidth based on the full segment.
This doesn't fully address the accounting since the lazy segment
downloads do not send their requested range nor requested limit.
Change-Id: Ic811e570c889be87bac4293547d6537a255078da
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
The system and database time may drift. We should use database time for
absolute "as of system time" to ensure that it's not newer than the
current database time. When the "as of system time" is in the future,
then the query will fail.
Change-Id: I5423f6aaad966ca03a76b5ff805bfba932e44a51
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
The cursor was not being used in the batch deletion.
The stream ID was not being used while deleting, which could in rare
circumstaces delete a newly uploaded object.
Use the stream id in deletion, rather than passing that information from
one query to another.
Change-Id: I03271c6e72747e345dfb0bb70989f29e835efd8e
Check that the bloom filter creation date is earlier than the
metainfo loop system time used for db scanning.
Change-Id: Ib0f47c124f5651deae0fd7e7996abcdcaac98fb4
During metainfo refactor we disabled some validation as it was designed to validate pointer. Now part of this validation is restored. This is first part.
Change-Id: I6132f922fe23d60118bbccfdb77fd93c3c81afed
Document the fields that migrated objects have missing, it's easy to
forget that they might not exist.
Avoid downloading the segment, if we're not sure whether it's the
correct one. We'll later improve the code with an heuristic to get a
best guess, which segment to download.
Change-Id: I12395c17bbf0edf25e0d00c8d072fce6085e303b
We recently added create_at column to segments table.
Old segments needs to get this value from objects table.
This tool will iterate over all objects and update corresponding
segments if create_at column is not set.
Change-Id: Ib5aedc384637e739ee9af84454af0639e2559416
When object doesn't contain segments the implementation would have
returned []*pb.SegmentDownloadResponse{nil} instead of nil.
Change-Id: If38f6d3d9d119f514f63ad1a8762055f657f3004
Add endpoint for getting object information, list segments in a range
and download the first segment in the range.
Change-Id: I056d697ae87c9aa34e7deccba8713902db260457
Repair checker expects to have information about CreatedAt and RepairedAt fields to calculate segment age metric.
Change-Id: I6b41df880d77133be541e14d10d91cc75759b339
Currently we can have an error about duplicated entry while inserting into value_attributions table. This change is changing simple insert into insert that is doing nothing on conflict.
Change-Id: I3efd8dc0b63115e8e2ed8f4196ccf969ee942295
we want to know a lot more about what's going on during
the operation of the metainfo loop. this patchset adds
more instrumentation to previously unmonitored but
interesting functions, and adds metrics that keep track
of how far through a specific loop we are. it also
adds mon:lock annotations, especially to the metainfo
loop run task, which recently changed, silently broke
some queries, and thus failed to alert us to spiking
run time issues.
Change-Id: I4358e2f2293d8ebe30eef497ba4e423ece929041
We were using two queries to delete one or more objects and its/their
segments in DeleteObjectExactVersion, DeletePendingObject, DeleteObjectLatestVersion,
DeleteObjectAnyStatusAllVersions,DeleteObjectsAllVersions.
This change delete objects and their segments in one query.
Change-Id: Ib2c0eb501f00b091ee32519e02155350c4dcb8b0
We have a use case for this in ListSegments. ListSegments is going to
return the EncryptedETag along with EncryptedKey and EncryptedKeyNonce.
It also must return the EncryptionParameters.
Since the EncryptionParameters are in the objects DB table, it would be
more efficient for ListSegment to avoid querying that DB table, but take
it from the SatStreamID.
Change-Id: I16c98641c0fe0c98e3303329d0da6ef137ca55cf
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
