Use tagsql.DB pointer as step database, to propagate changes
back and forth between actual database and migration.
Adds CreateDB operation to the migration step to be able to
create new dbs before executing migration action.
Adjusts storagenode database migration to use inner tagsql.DB
pointer of each database as step.DB.
Adjusts satellite dabase migration, adds proxy migrationDB field
to satellite db that wraps itself as tagsql.DB, pointer of which
is used as step.DB.
Change-Id: Ifed4de5b01a356cf7b37db64d2eaeb7b61982c5c
To avoid further name collisions, the very broad named package gets moved into
the consoleauth package where its also mainly being used.
Change-Id: Ie563c9700adbf0553baca2b7b8ba4a1d9c29d144
Currently Cockroach migration test is the most heavy with regards to
schema changes. This causes other tests to time out. This adds an
alternate cockroach instance that is used for migration tests.
Change-Id: I01fe9313527ff002f0bb0914dd52c3645b8eaf6d
This PR adds the following items:
1) an in-memory read-only cache thats stores project limit info for projectIDs
This cache is stored in-memory since this is expected to be a small amount of data. In this implementation we are only storing in the cache projects that have been accessed. Currently for the largest Satellite (eu-west) there is about 4500 total projects. So storing the storage limit (int64) and the bandwidth limit (int64), this would end up being about 200kb (including the 32 byte project ID) if all 4500 projectIDs were in the cache. So this all fits in memory for the time being. At some point it may not as usage grows, but that seems years out.
The cache is a read only cache. When requests come in to upload/download a file, we will read from the cache what the current limits are for that project. If the cache does not contain the projectID, it will get the info from the database (satellitedb project table), then add it to the cache.
The only time the values in the cache are modified is when either a) the project ID is not in the cache, or b) the item in the cache has expired (default 10mins), then the data gets refreshed out of the database. This occurs by default every 10 mins. This means that if we update the usage limits in the database, that change might not show up in the cache for 10 mins which mean it will not be reflected to limit end users uploading/downloading files for that time period..
Change-Id: I3fd7056cf963676009834fcbcf9c4a0922ca4a8f
Additionally, this PR changes NewNodeFraction devDefault and testplanet config from 0.05 to 1.
This is because many tests relied on selecting nodes that were reputable based on audit and uptime
counts of 0, in effect, selecting new nodes as reputable ones.
However, since reputation is now indicated by a vetted_at db field that is explicitly set
rather than implied by audit and uptime counts, it would be more complicated to try to
update all of the nodes' reputations before selecting nodes for tests.
Now we just allow all test nodes to be new if needed.
Change-Id: Ib9531be77408662315b948fd029cee925ed2ca1d
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.
Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
* The audit worker wants to get items from the queue and process them.
* The audit chore wants to create new queues and swap them in when the
old queue has been processed.
This change adds a "Queues" struct which handles the concurrency
issues around the worker fetching a queue and the chore swapping a new
queue in. It simplifies the logic of the "Queue" struct to its bare
bones, so that it behaves like a normal queue with no need to understand
the details of swapping and worker/chore interactions.
Change-Id: Ic3689ede97a528e7590e98338cedddfa51794e1b
To prevent longlived unused connections, set the maximum time to 30 minutes to
prevent proxies and loadbalancers forcefully cutting the connection.
This helps in scenarios with low load/requests to a DB.
Change-Id: I7dba15ef97f6f6541e872a6fb1d3a9bbbfe5bb50
TestMaxOutBuckets is one of our slower tests (50-90s).
This change seems to make it 2-12s.
It reduces the number of buckets that need to be created.
It also removes unnecessary storage nodes.
Change-Id: I1012fc6e9258b2f7674b16da4e8b418741c93eea
This change accomplishes multiple things:
1. Instead of having a max in flight time, which means
we effectively have a minimum bandwidth for uploads
and downloads, we keep track of what windows have
active requests happening in them.
2. We don't double check when we save the order to see if it
is too old: by then, it's too late. A malicious uplink
could just submit orders outside of the grace window and
receive all the data, but the node would just not commit
it, so the uplink gets free traffic. Because the endpoints
also check for the order being too old, this would be a
very tight race that depends on knowledge of the node system
clock, but best to not have the race exist. Instead, we piggy
back off of the in flight tracking and do the check when
we start to handle the order, and commit at the end.
3. Change the functions that send orders and list unsent
orders to accept a time at which that operation is
happening. This way, in tests, we can pretend we're
listing or sending far into the future after the windows
are available to send, rather than exposing test functions
to modify internal state about the grace period to get
the desired effect. This brings tests closer to actual
usage in production.
4. Change the calculation for if an order is allowed to be
enqueued due to the grace period to just look at the
order creation time, rather than some computation involving
the window it will be in. In this way, you can easily
answer the question of "will this order be accepted?" by
asking "is it older than X?" where X is the grace period.
5. Increases the frequency we check to send up orders to once
every 5 minutes instead of once every hour because we already
have hour-long buffering due to the windows. This decreases
the maximum latency that an order will be reported back to
the satellite by 55 minutes.
Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
On run, write the storage directory verification file.
Every time the node runs it will write the file even if it already exists.
The reason we do this is because if the verification file is missing, the SN
doesn't know whether it is an incorrect directory, or it simply hasn't written
the file yet, and we want to keep nodes running without needing operator intervention.
Once this change has been a part of the minimum version for several releases,
we will move the file creation from the run command to the setup
command. Run will only verify its existence.
Change-Id: Ib7d20e78e711c63817db0ab3036a50af0e8f49cb
Sometimes SNOs fail to properly configure or lose connection to their storage directory
which can result in DQ. This causes unnecessary repair and is unfortunate for all parties.
This change introduces the creation of a special file in the storage directory at runtime
containing the node ID. While the storage node runs, it periodically verifies that it can
find said file with the correct contents in the correct location. If not, the node will
shut down with an error message.
This change will solve the issue of nodes losing access to the storage directory, but it will not
solve the issue of nodes pointing to the wrong directory, as the identifying file is created each
time the node starts up. After this change has been the minimum version for a few releases, we will
remove the creation of the directory-identifying file from the storage node run command and add it
to the setup command.
Change-Id: Ib7b10e96ac07373219835e39239e93957e7667a4
services
This PR adds a limiter on the amount of concurrent objects deletion can be handled so
we don't run out of memory.
Change-Id: Id2ce368af6f86845fcdfd34cb2f5e460efe9b272
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.
The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.
Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
In testplanet Run function we create a new configuration variable on
each t.Run for setting the value to the config name field when it's
empty, however the new copy of the configuration was not used.
Change-Id: I9da34e743f9648850c96556eab0349e742db3aac
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.
Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.
In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).
In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.
In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.
The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.
Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.
Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
Add a config so that some percent of users require credit cards /
account balances
in order to create a project or have a promotional coupon applied
UI was updated to match needed paywall status
At this point we decided not to use a field to store if a user is in an
A/B
test, and instead just use math to see if they're in a test. We decided
to use MD5 (because its in Postgres too) and User UUID for that math.
Change-Id: I0fcd80707dc29afc668632d078e1b5a7a24f3bb3
Removes old project_bandwidth_rollups records that are no longer used.
Uses a retain months configuration to determine how many months to save. Current month cannot be removed.
Tests retainMonths=-1, 0, 2
Change-Id: Ia4be2546cdb28802427acf41ecd85ad66df3e62c
The order in which column names appear in an index should be
deterministic (for both our sqlite and postgresql code). Also, the order
is very relevant as to whether a given schema is correct.
Change-Id: I227ea057fcd9c3e967dd241a7e1c787d1bc4baa1
This change switches the backend logic to use the new DB column on the users table to restrict project creation.
Furthermore it back fills the existing limits from registration tokens to the new column to ensure no users are reset to the new default.
UI is updated to reflect ability to create several projects
Change-Id: Ie29157430ae6b065411ca4c4557c9f1be69cdc4f
We passed in revocationDB and metainfoDB for no reason.
Lets remove it from the dependency list to further reduce the footprint.
Change-Id: Ic0317bb92670fbd305d4a8b0ed1cb82858e2f6d3
Why: We need a way to cut down on database traffic due to bandwidth
measurement and tracking.
What: This changeset is the Satellite side of settling orders in 1 hr windows.
See design doc for more details: https://review.dev.storj.io/c/storj/storj/+/1732
Change-Id: I2e1c151e2e65516ebe1b7f47b7c5f83a3a220b31
What:
Use the github.com/jackc/pgx postgresql driver in place of
github.com/lib/pq.
Why:
github.com/lib/pq has some problems with error handling and context
cancellations (i.e. it might even issue queries or DML statements more
than once! see https://github.com/lib/pq/issues/939). The
github.com/jackx/pgx library appears not to have these problems, and
also appears to be better engineered and implemented (in particular, it
doesn't use "exceptions by panic"). It should also give us some
performance improvements in some cases, and even more so if we can use
it directly instead of going through the database/sql layer.
Change-Id: Ia696d220f340a097dee9550a312d37de14ed2044
STORJ_POSTGRES_TEST naming was not consistent with STORJ_SIM_POSTGRES.
This allows to use STORJ_TEST_POSTGRES for clarity, it still has a
fallback to STORJ_POSTGRES_TEST.
Change-Id: I6f294c66c80fcfd6750fea2a89795f3b7f5dd691
Since we increased the number of concurrent audit workers to two, there are going
to be instances of a single node being audited simultaneously for different segments.
If the node times out for both, we will try to write them both to the pending audits
table, and the second will return an error since the path is not the same as what
already exists. Since with concurrent workers this is expected, we will log the
occurrence rather than return an error.
Since the release default audit concurrency is 2, update testplanet default to run with
concurrent workers as well.
Change-Id: I4e657693fa3e825713a219af3835ae287bb062cb
