* satellite: update log levels
Change-Id: I86bc32e042d742af6dbc469a294291a2e667e81f
* log version on start up for every service
Change-Id: Ic128bb9c5ac52d4dc6d6c4cb3059fbad73f5d3de
* Use monkit for tracking failed ip resolutions
Change-Id: Ia5aa71d315515e0c5f62c98d9d115ef984cd50c2
* fix compile errors
Change-Id: Ia33c8b6e34e780bd1115120dc347a439d99e83bf
* add request limit value to storage node rpc err
Change-Id: I1ad6706a60237928e29da300d96a1bafa94156e5
* we cant track storage node ids in monkit metrics so lets use logging to track that for expired orders
Change-Id: I1cc1d240b29019ae2f8c774792765df3cbeac887
* fix build errs
Change-Id: I6d0ffe058e9a38b7ed031c85a29440f3d68e8d47
After calling uplink.Upload it is not guaranteed that the
storage node has yet saved all the orders since it happens
asynchronously. Hence we need a separate func to wait
for them to complete.
Change-Id: I0c34b3ea6c98dbcf37f80493c0e10a8bdbbb2aaf
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
When a storagenode begins to run low on capacity, we want to notify
the satellite before completely running out of space. To achieve this,
at the end of an upload request, the SN checks if its available space has
fallen below a certain threshold. If so, trigger a notification to the
satellites.
The new NotifyLowDisk method on the monitor chore is implemented using the
common/syn2.Cooldown type, which allows us to execute contact only once
within a given timeframe; avoiding hammering the satellites with requests.
This PR contains changes to the storagenode/contact package, namely moving
methods involving the actual satellite communication out of Chore and into
Service. This allows us to ping satellites from the monitor chore
Change-Id: I668455748cdc6741291b61130d8ef9feece86458
common/pb moved grpc to a separate package common/pb/pbgrpc.
This updates this repository to use it.
Change-Id: I2de2a190688871cf9cb61f7ea511f8a01e264e4e
With commit: 3331b443e7, satellite will
start calling `DeletePieces`. Therefore, we can remove the old endpoint
once the above commit is deployed with all satellites
Change-Id: I0124bc00a7cb808d119eb59f8fcd7fadf68158bb
Curently, storage nodes only report their capacity to satellites
once per hour. If a node fills up, it will fail all uploads until
the next contact cycle begins. With these changes, at the end of an
upload we check whether the MinimumDiskSpace threshold has been
passed. If so, trigger the monitor chore to update the node's
capacity, then trigger the contact chore to report the new
capacity to the satellites
Change-Id: Ie6aadaade1e2c12c87e03f8ff9059a50121380a0
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
this is to help protect against intentional or unintentional
slowloris style problems where a client keeps a tcp connection
alive but never sends any data. because grpc is great, we have
to spawn a separate goroutine for every read/write to the stream
so that we can return from the server handler to cancel it if
necessary. yep. really.
additionally, we update the rpcstatus package to do some stack
trace capture and add a Wrap method for the times where we want
to just use the existing error.
also fixes a number of TODOs where we attach status codes to the
returned errors in the endpoints.
Change-Id: Id8bb8ff84aa34e0f711b0cf9bce3908b36a1d3c1
This change updates the storagenode piecestore apis to expose access to
the full piece size stored on disk. Previously we only had access to
(and only kept a cache of) the content size used for all pieces. This
was inaccurate when reporting the amount of disk space used by nodes.
We now have access to the total content size, as well as the total disk
usage, of all pieces. The pieces cache also keeps a cache of the total
piece size along with the content size.
Change-Id: I4fffe7e1257e04c46021a2e37c5adc6fe69bee55
When error is formatted using %v it's not possible to check
whether the error was caused by a context cancellation.
Change-Id: Ia77dfb0817e49d9a7b168c12a6300d131007d0ee
This commit adds functionality to include the space used in the trash
directory when calculating available space on the node.
It also includes this trash value in the space used cache, with methods
to keep the cache up-to-date as files are trashed, restored, and
emptied.
As part of the commit, the RestoreTrash and EmptyTrash methods have
slightly changed signatures. RestoreTrash now also returns the keys that
were restored, while EmptyTrash also returns the total disk space
recovered. Each of these changes makes it possible to keep the cache
up-to-date and know how much space is being used/recovered.
Also changed is the signature of PieceStoreAccess.ContentSize method.
Previously this method returns only the content size of the blob,
removing the size of any header data. This method has been renamed
`Size` and returns both the full disk size and content size of the blob.
This allows us to only stat the file once, and in some instances (i.e.
cache) knowing the full file size is useful.
Note: This commit simply adds the trash size data to the piece size data
we were already collecting. The piece size data is not accurate for all
use-cases (e.g. because it does not contain piece header data); however,
this commit does not fix that problem. Now that the ContentSize (Size)
method returns the full size of the file, it should be easier to fix
this problem in a future commit.
Change-Id: I4a6cae09e262c8452a618116d1dc66b687f59f85
- also updated ping chore to pick up trust changes
- fixed small typo in blueprint
- fixed flags for storj-sim
- wired up changes to testplanet
Change-Id: I02982f3a63a1b4150b82a009ee126b25ed51917d
planet.Start starts a testplanet system, whereas planet.Run starts a testplanet
and runs a test against it with each DB backend (cockroach compat).
Change-Id: I39c9da26d9619ee69a2b718d24ab00271f9e9bc2
* pkg/pg: Add new service function storage node
Add a new service function to the storage node piece store for deleting
pieces when satellites request them.
* storagenode/piecestore: Add endpoint to delete piece
Add a new endpoint to receive from trusted satellites to delete a piece.
* private/testplanet: Fix storagenode mock
Add to the storagenode mock the new endpoint method.
* proto.lock: Update it with the last protbuff changes
* storagenode/piecestore: Reuse test piece upload
Extract the repeated logic from several tests functions for uploading a
test piece to a test helper function.
* uplink/piecestore: Implement client side method
Implement the client side method of the new piecestore RPC function.
* storagenode/piecestore: Add test DeletePiece endpoint
Implement a test for the DeletePiece new endpoint method.
* put TestCreateV0 back in StoreForTest
* avoid direct handles to V0 pieceinfo db
* type mismatch fix
* use storage.Blobs interface in store_test.go
..instead of filestore.Store. this will allow filestore.Store to become
unexported.
* unexport filestore.Store
rename it to blobStore. things should use the storage.Blobs interface
instead. changes in this commit are purely mechanical (made through the
"refactor" tool in Gocode followed by search/replace on the word "Store"
within the storage/filestore/ directory).
* kill filestore.StoreForTest
now that filestore.blobStore is unexported, there isn't a need for a
specialized wrapper type. this (not coincidentally) also makes it
possible for the WriterForFormatVersion() method on
storagenode/pieces.StoreForTest to work, without requiring everything to
wrap the store.blobs attribute in a filestore.StoreForTest, which was
impractical.
The upload code currently updates the usage in a deferred call to saveOrder().
The consequence is that in the success case, the RPC is completed before
the usage has been updated.
This change repurposes the deferred call to update usage in the
failure case, while explicitly updating the usage before completing the
RPC.
This fixes some test flakiness when using dRPC. gRPC waits until the final status is written before a Recv call completes, and the final status is written by the server after the handler function has exited. In practice this means that the client is blocked until the defer call is also finished. So this change will not change performance at all.
It has two advantages:
(1) It fixes test flakiness
and, more importantly:
(2) reduces the chances that someone will accidentally write a flaky test in the future
This change adds a trusted registry (via the source code) of node address to node id mappings (currently only for well known Satellites) to defeat MITM attacks to Satellites. It also extends the uplink UI such that when entering a satellite address by hand, a node id prefix can also be added to defeat MITM attacks with unknown satellites.
When running uplink setup, satellite addresses can now be of the form 12EayRS2V1k@us-central-1.tardigrade.io (not even using a full node id) to ensure that the peer contacted is the peer that was expected. When using a known satellite address, the known node ids are used if no override is provided.
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
