Storage nodes undergoing Graceful Exit have up to now been receiving
hostnames for all other storage nodes they need to contact when
transferring pieces. This adds up to a lot of DNS lookups, which
apparently overwhelm some home routers. There does not seem to be any
need for us to send hostnames for graceful exit as opposed to IP
addresses; we already use IP addresses (as given by the last_ip_port
column in the nodes table) for all the GET and PUT orders we send out.
This change causes IP addresses to be used instead.
I started trying to construct a test to ensure that the behavior
changed, but it was rabbit-holing, so I've begun to feel that maybe this
change doesn't require one; it is a very simple change, and very much of
the same nature as what we already do for IPs in CreateGetOrderLimits
and CreatePutOrderLimits (and others).
Change-Id: Ib2b5ffe7a9310e9cdbe7464450cc7c934fa229a1
With the new overlay.AuditOutcome type for offline audits, the
IsUp field is redundant. If AuditOutcome != AuditOffline, then
the node is online.
In addition to removing the field itself, other changes needed
to be made regarding the relationship between 'uptime' and 'audits'.
Previously, uptime and audit outcome were completely separated. For
example, it was possible to update a node's stats to give it a
successful/failed/unknown audit while simultaneously indicating that
the node was offline by setting IsUp to false. This is no longer possible
under this changeset. Some test which did this have been changed slightly
in order to pass.
Also add new benchmarks for UpdateStats and BatchUpdateStats with different
audit outcomes.
Change-Id: I998892d615850b1f138dc62f9b050f720ea0926b
After moving SatStreamID and SatSegmentID from common I missed changing
some methods in metainfo endpoint. This change is a fix for that.
Change-Id: I34e121fce47371ee4cfd92cce03809520b68859f
We have some types that are only valid for satellite usage. Such types
are SatStreamID and SatSegmentID. This change moves those types to
storj/storj and adds basic infrastructure for generating code.
Change-Id: I1e643844f947ce06b13e51ff16b7e671267cea64
Some of metainfo endpoint methods are not used but we still have
implementation there. This change removes unused code and returns
unimplemented error for those methods.
Change-Id: I74e75e0caff76a4f5d119ee989b687b4e9d6e6f9
This change removed unused 'createRequests' struct. As far I remember it
was used to help validating old metainfo beginObject/commitObject flow.
Change-Id: I0f139b9934196d73f26eafa347ba5605722f3a55
As part of the Metainfo Refactoring, we need to make the Metainfo Loop
working with both the current PointerDB and the new Metabase. Thus, the
Metainfo Loop should pass to the Observer interface more specific Object
and Segment types instead of pb.Pointer.
After this change, there are still a couple of use cases that require
access to the pb.Pointer (hence we have it as a field in the
metainfo.Segment type):
1. Expired Deletion Service
2. Repair Service
It would require additional refactoring in these two services before we
are able to clean this.
Change-Id: Ib3eb6b7507ed89d5ba745ffbb6b37524ef10ed9f
- Remove flag for switching off offline audit reporting.
- Change the overlay method used from UpdateUptime to BatchUpdateStats, as this
is where the new online scoring is done.
- Add a new overlay.AuditOutcome type: AuditOffline. Since we now use the same
method to record offline audits as success, failure, and unknown, we need to
distinguish offline audits from the rest.
Change-Id: Iadcfe10cf13466fa1a1c2dc542db8994a6423355
This fixes a slow query that was taking up to 4 seconds in production
SELECT node_id, path, piece_num, root_piece_id, durability_ratio, queued_at, requested_at, last_failed_at, last_failed_code, failed_count, finished_at, order_limit_send_count
FROM graceful_exit_transfer_queue
WHERE node_id = '[redacted]'
AND finished_at is NULL
AND last_failed_at is NULL
ORDER BY durability_ratio asc, queued_at asc LIMIT 300 OFFSET 0;
Change-Id: Ib89743ca35f1d8d0a1456b20fa08c683ebdc1549
Fix the DeleteAccount handler to return 501 HTTP status code because
it's what corresponds for a "Not Implemented" status.
Add a black box test for the DeleteAccount to ensure that always return
an error response because, at this time, we don't allow to delete
accounts through the API.
This test was not added to the corresponding commit
https://review.dev.storj.io/c/storj/storj/+/2712 due to the rush to
fix it.
Change-Id: Ibcf09e2ec52f182a8a580d606c457328d94c8b60
A year ago we made the audit service deleting expired segments.
Meanwhile, we introduced an expired deletetion sub-service in the
metainfo service which sole purpose is deleting expired segments.
Therefore, now we are removing this responsibility from the audit
service. It will continue to avoid reporting failures on expired
segments, but it would not delete them anymore.
We do this to cleanup responsibilities in advance of the metainfo
refactoring.
Change-Id: Id7aab2126f9289dbb5b0bdf7331ba7a3328730e4
In production we are seeing ~115 storage nodes (out of ~6,500) are not using the new SettlementWithWindow endpoint (but they are upgraded to > v1.12).
We analyzed data being reported by monkit for the nodes who were above version 1.11 but were not successfully submitting orders to the new endpoint.
The nodes fell into a few categories:
1. Always fail to list orders from the db; never get to try sending orders from the filestore
2. Successfully list/send orders from the db; never get to calling satellite endpoint for submitting filestore orders
3. Successfully list/send orders from the db; successfully list filestore orders, but satellite endpoint fails (with "unauthenticated" drpc error)
The code change here add the following to address these issues:
- modify the query for ordersDB.listUnsentBySatellite so that we no longer select expired orders from the unsent_orders table
- always process any orders that are in the ordersDB and also any orders stored in the filestore
- add monkit monitoring to filestore.ListUnsentBySatellite so that we can see the failures/successes
Change-Id: I0b473e5d75252e7ab5fa6b5c204ed260ab5094ec
This preserves the last_ip_and_port field from node lookups through
CreateAuditOrderLimits() and CreateAuditOrderLimit(), so that later
calls to (*Verifier).GetShare() can try to use that IP and port. If a
connection to the given IP and port cannot be made, or the connection
cannot be verified and secured with the target node identity, an
attempt is made to connect to the original node address instead.
A similar change is not necessary to the other Create*OrderLimits
functions, because they already replace node addresses with the cached
IP and port as appropriate. We might want to consider making a similar
change to CreateGetRepairOrderLimits(), though.
The audit situation is unique because the ramifications are especially
powerful when we get the address wrong. Failing a single audit can have
a heavy cost to a storage node. We need to make extra effort in order
to avoid imposing that cost unfairly.
Situation 1: If an audit fails because the repair worker failed to make
a DNS query (which might well be the fault on the satellite side), and
we have last_ip_and_port information available for the target node, it
would be unfair not to try connecting to that last_ip_and_port address.
Situation 2: If a node has changed addresses recently and the operator
correctly changed its DNS entry, but we don't bother querying DNS, it
would be unfair to penalize the node for our failure to connect to it.
So the audit worker must try both last_ip_and_port _and_ the node
address as supplied by the SNO.
We elect here to try last_ip_and_port first, on the grounds that (a) it
is expected to work in the large majority of cases, and (b) there
should not be any security concerns with connecting to an out-or-date
address, and (c) avoiding DNS queries on the satellite side helps
alleviate satellite operational load.
Change-Id: I9bf6c6c79866d879adecac6144a6c346f4f61200
This change allows the creation and deletion of api keys via the admin API.
It adds two methods for deletion, one via the name and projectID and the
second one via the serialized apikey directly.
Change-Id: Ida8aa729e716db58c671a901e5f7e39253e89a0d
We are moving an error into rejectErr since its preventing storage nodes from being able to settle other orders.
Change-Id: I3ac97c340e491b127f5e0024c5e8bd9f4df8d5c3
Use tagsql.DB pointer as step database, to propagate changes
back and forth between actual database and migration.
Adds CreateDB operation to the migration step to be able to
create new dbs before executing migration action.
Adjusts storagenode database migration to use inner tagsql.DB
pointer of each database as step.DB.
Adjusts satellite dabase migration, adds proxy migrationDB field
to satellite db that wraps itself as tagsql.DB, pointer of which
is used as step.DB.
Change-Id: Ifed4de5b01a356cf7b37db64d2eaeb7b61982c5c
This change completes the column migration of
5f6fccc6e8 and
2f648fd981.
It resets every users project limits who are below or equal to our
current production defaults.
Change-Id: Ie041d08bb67b62844f6023190fc00bc2dad5b1cb
WHAT:
Now project amount limit is taken from users db instead of config. But if db value is 0 then default config value will be used instead.
WHY:
this will allow us to change user's project limit by changing db value.
Change-Id: I9edcd0bf9eaae5fe40e90a44cac82d9ce8519274
This makes it possible to remove of this obsolete flag from the
multi-tenant gateway.
As a consequence, displaying the GATEWAY_0_ACCESS env var will always
require a running storj-sim. Until now, it was required only the first
time. Then the value was stored in the 'access' config. But this is now
not possible anymore.
The changes in StripeMock are required to fix failures in integration
tests. StripeMock is in-memory and its data does not survive restarts of
storj-sim. The second and following starts of storj-sim had invalid
state of StripeMock, which failed requests that were required to
populate the GATEWAY_0_ACCESS env var. The changes in StripeMock makes
it repopulate the Stripe customers from the database.
Change-Id: I981a208172b76577f12ecdaae485f5ae4ea269bc
The same was that our Admin API handles project and account deletions currently, we would like
to have the same checks on the user-facing API. This PR adds the same checks to the console service.
General more applicable checks have been moved directly into the payments service.
In addition it adds the BucketsDB to the console DB, to have easier access and avoiding import cycles with
the metainfo package.
A small cleanup around our unnecessary monkit imports made it in as well.
Change-Id: I8769b01c2271c1687fbd2269a738a41764216e51
holding it during node i/o means slow nodes can hold up order
processing for everyone else. this dramatically increases
the amount of tiem spent handling orders.
Change-Id: Iec999b7ed0817c921a0fd039097a75bdd3c70ea2
Doing it at the ProcessOrders level was insufficient: the endpoints
make multiple database calls. It was a misguided attempt to only
have one spot enter the semaphore. By putting it in the endpoint
we can not only be sure that the concurrency is correctly limited
but it can be configurable easily.
Change-Id: I937149dd077adf9eb87fce52a1a17dc0afe96f64
we have thundering herds of order submissions that take all of the
database connections causing temporary periodic outages. limit
the amount of concurrent order processing to 2.
Change-Id: If3f86cdbd21085a4414c2ff17d9ef6d8839a6c2b
Adds membership checks for the following calls:
- GetProject
Add ownership checks for the following calls:
- DeleteProject
It also disables the API endpoint to delete a project.
Furthermore it adds tests for the console service.
Change-Id: I1ffc8dcb44746a74ad06a7dbd064a29c57c25272
The VerifyPieceHashes method has a sanity check for the number pieces to
be removed from the pointer after the audit for verifying the piece
hashes.
This sanity check failed when we executed the command on the production
satellites because the Verify command removes Fails and PendingAudits
nodes from the audit report if piece_hashes_verified = false.
A new temporary UsedToVerifyPieceHashes flag is added to
audits.Verifier. It is set to true only by the verify-piece-hashes
command. If the flag is true then the Verify method will always include
Fails and PendingAudits nodes in the report.
Test case is added to cover this use case.
Change-Id: I2c7cb6b12029d52b2fc565365eee0826c3de6ee8
To avoid further name collisions, the very broad named package gets moved into
the consoleauth package where its also mainly being used.
Change-Id: Ie563c9700adbf0553baca2b7b8ba4a1d9c29d144
