NonParallel running is needed for gateway tests, because minio
unfortunately relies on global state.
Change-Id: If730db2ab86d10f4d02e1ac3128f758e9c18cdff
This moves grpc related tlsopts methods to private/grpctlsopts.
This allows to remove grpc dependency from tlsopts.
Change-Id: I25090b82b1e7a0633417ad600f8587b0c30ace73
common/pb moved grpc to a separate package common/pb/pbgrpc.
This updates this repository to use it.
Change-Id: I2de2a190688871cf9cb61f7ea511f8a01e264e4e
This new repair timeout (configured as TotalTimeout) will include both
the time to download pieces and the time to upload pieces, as well as
the time to pop the segment from the repair queue.
This is a move from Github PR #3645.
Change-Id: I47d618f57285845d8473fcd285f7d9be9b4318c8
With commit: 3331b443e7, satellite will
start calling `DeletePieces`. Therefore, we can remove the old endpoint
once the above commit is deployed with all satellites
Change-Id: I0124bc00a7cb808d119eb59f8fcd7fadf68158bb
Curently, storage nodes only report their capacity to satellites
once per hour. If a node fills up, it will fail all uploads until
the next contact cycle begins. With these changes, at the end of an
upload we check whether the MinimumDiskSpace threshold has been
passed. If so, trigger the monitor chore to update the node's
capacity, then trigger the contact chore to report the new
capacity to the satellites
Change-Id: Ie6aadaade1e2c12c87e03f8ff9059a50121380a0
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
This peer will contain our administrative panels.
It's completely separated from our other satellite
processes because it allows better control for restricting
access to it.
Change-Id: Ifca473bee82ff6c680b346918ba32b835a7a6847
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
it was noticed that if you had a long lived transaction A that
was blocking some other transaction B and A was being aborted
due to retriable errors, then transaction B was never given
priority. this was due to using savepoints to do lightweight
retries.
this behavior was problematic becaue we had some queries blocked
for over 16 hours, so this commit addresses the issue with two
prongs:
1. bound the amount of time we will retry a transaction
2. create new transactions when a retry is needed
the first ensures that we never wait for 16 hours, and the value
chosen is 10 minutes. that should be long enough for an ample
amount of retries for small queries, and huge queries probably
shouldn't be retried, even if possible: it's more preferrable to
find a way to make them smaller.
the second ensures that even in the case of retries, queries that
are blocked on the aborted transaction gain priority to run.
between those two changes, the maximum stall time due to retries
should be bounded to around 10 minutes.
Change-Id: Icf898501ef505a89738820a3fae2580988f9f5f4
We move PathCipher to encryption.Store and we need to adjust
storj/uplink for those changes. Uplink repo is also using libuplink to
run tests so we need first adjust storj/storj libuplink and later
storj/uplink.
Change-Id: I84f23e6bad18ac139f72c19939dc526f9f46d88b
Allow rate limit project cache to expire so we can make project level rate limit changes without restarting the satellite process.
Change-Id: I159ea22edff5de7cbfcd13bfe70898dcef770e42
This ought to make it so that all single statements (Exec- or Query-) on
a CockroachDB backend will get retried as necessary. As there is no need
for savepoints to be allocated or released in this case, there is no
round-trip overhead except when statements actually do need to be
retried.
Change-Id: Ibd7f1725ff727477c456cb309120d080f3cd7099
We now close databases in testplanet in reverse order, knowing that some
caches and other objects need to close prior to the underlying db. Some
dbs were not being added near the list of closeable databases near their
creation, causing an issue with shutdown order.
Change-Id: I23391f4d77649030493e47bd7169002a72b3bf7a
this is to help protect against intentional or unintentional
slowloris style problems where a client keeps a tcp connection
alive but never sends any data. because grpc is great, we have
to spawn a separate goroutine for every read/write to the stream
so that we can return from the server handler to cancel it if
necessary. yep. really.
additionally, we update the rpcstatus package to do some stack
trace capture and add a Wrap method for the times where we want
to just use the existing error.
also fixes a number of TODOs where we attach status codes to the
returned errors in the endpoints.
Change-Id: Id8bb8ff84aa34e0f711b0cf9bce3908b36a1d3c1
Since we have caches on top of databases and they are included in the
databases list, we need to shut them down in-reverse order to avoid
issues with flushing to a closed database.
Change-Id: I3f23a527a2a5425638b1a7e2cab84741f019d493
We don't do a lot of panicking in our main code, so hopefully this won't
matter much, but we /do/ call panic a lot in our tests (t.Fatal,
require.NoError, etc). And when that happens, we need pending
transactions to be aborted or we can get into a deadlock situation when
something else tries to /Close/ that connection.
Change-Id: Idaf0d543ac95afea34f9b2393d1187f5322e9f0f
Currently we risk losing pending bandwidth rollup writes even on a clean
shutdown. This change ensures that all pending writes are actually
written to the db when shutting down the satellite.
Change-Id: Ideab62fa9808937d3dce9585c52405d8c8a0e703
Currently Cockroach DB setup takes a significant amount of time.
This flattens the database setup into a single query,
which improves the test time significantly.
The migration tests still test each migration separately.
Change-Id: Iaca16f34a6af3926fa2b5ebf618f939fd59460b3
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
Replace all the remaining uses of sql.DB with tagsql.DB to
fix issues with context cancellation.
Introduce tagsql.Open which helps to get rid of all tagsql.Wrap-s.
Use tagsql in cockroachkv and postgreskv.
Change-Id: I8946d203341cb85a25976896fc7881e1f704e779
Not having a skew caused an issue where:
1. Uplink calls "begin segment", where segment isn't committed to the
database.
2. Uplink stores piece X to the storage node A with timestamp 1.
3. Satellite runs garbage collection with timestamp 2.
4. Satellite sends retain request to storage node A with timestamp 2.
5. Storage node A deletes piece X, because 1 < 2.
6. Uplink calls "commit segment" with storage node A in it.
7. Download of segment fails, because A doesn't have piece X.
In production this is not an issue since the MaxTimeSkew is 72h by
default.
Change-Id: Id87ca3ddc44103dcd85d031b1367168c014b8e7b
Also added temporary types withRebind and withTagTx,
which will be later removed. Currently they help to avoid
changing the whole codebase at the same time.
Change-Id: I7f07ba8f4709a23a463bfa67464628665a05808f
dbschema.Query is used only for testing and sqlite,
so this won't cause us problems in production.
Change-Id: Ib296a7daf161a9d3de23a7dfdc4f505d47ac4a37
storagenode database preflight check.
Disable preflight database check by default, and have the option to
enable it. This will allow us to enable it once it is definitely
working.
Also change the name of the config flag for preflight time sync.
Change-Id: Ie2e20f9e25dcb38794eafa7e1505e7c6ff287c99
live accounting used to be a cache to store writes before they are picked up during
the tally iteration, after which the cache is cleared. This created a window in which
users could potentially exceed the storage limit. This PR refactors live accounting to
hold current estimations of space used per project. This should also reduce DB load
since we no longer need to query the satellite DB when checking space used for limiting.
The mechanism by which the new live accounting system works is as follows:
During the upload of any segment, the size of that segment is added to its respective
project total in live accounting. At the beginning of the tally iteration we record
the current values in live accounting as `initialLiveTotals`. At the end of the tally
iteration we again record the current totals in live accounting as `latestLiveTotals`.
The metainfo loop observer in tally allows us to get the project totals from what it
observed in metainfo DB which are stored in `tallyProjectTotals`. However, for any
particular segment uploaded during the metainfo loop, the observer may or may not
have seen it. Thus, we take half of the difference between `latestLiveTotals` and
`initialLiveTotals`, and add that to the total that was found during tally and set that
as the new live accounting total.
Initially, live accounting was storing the total stored amount across all nodes rather than
the segment size, which is inconsistent with how we record amounts stored in the project
accounting DB, so we have refactored live accounting to record segment size
Change-Id: Ie48bfdef453428fcdc180b2d781a69d58fd927fb
this commit introduces the reported_serials table. its purpose is
to allow for blind writes into it as nodes report in so that we have
minimal contention. in order to continue to accurately account for
used bandwidth, though, we cannot immediately add the settled amount.
if we did, we would have to give up on blind writes.
the table's primary key is structured precisely so that we can quickly
find expired orders and so that we maximally benefit from rocksdb
path prefix compression. we do this by rounding the expires at time
forward to the next day, effectively giving us storagenode petnames
for free. and since there's no secondary index or foreign key
constraints, this design should use significantly less space than
the current used_serials table while also reducing contention.
after inserting the orders into the table, we have a chore that
periodically consumes all of the expired orders in it and inserts
them into the existing rollups tables. this is as if we changed
the nodes to report as the order expired rather than as soon as
possible, so the belief in correctness of the refactor is higher.
since we are able to process large batches of orders (typically
a day's worth), we can use the code to maximally batch inserts into
the rollup tables to make inserts as friendly as possible to
cockroach.
Change-Id: I25d609ca2679b8331979184f16c6d46d4f74c1a6
This reverts commit 8e242cd012.
Revert because lib/pq has known issues with context cancellation.
These issues need to be resolved before these changes can be merged.
Change-Id: I160af51dbc2d67c5449aafa406a403e5367bb555
this will allow for some nice runtime analysis down the road.
also, this allows for wrapping database handles in a way that
can interact with these contexts
requires https://review.dev.storj.io/c/storj/dbx/+/514
Change-Id: Ib087b7cd73296dd2c1e0331314da34d861f61d2b
When error is formatted using %v it's not possible to check
whether the error was caused by a context cancellation.
Change-Id: I164d1c83cdf5e7e6eacf082145b5c6a47078d041
We decided that better name for "scope" will be "access". This change
refactors cmd part of code but don't touch libuplink. For backward
compatibility old configs with "scope" field will be loaded without any
issue. Old flag "scope" won't be supported directly from command line.
https://storjlabs.atlassian.net/browse/V3-3488
Change-Id: I349d6971c798380d147937c91e887edb5e9ae4aa
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb
Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
This code needs to work against cockroachDB, so transactions must be retried
when a retryable error is returned. This change puts migrate
transactions into the dbutil.WithTx transactional helpers to achieve
this in the easiest way.
Change-Id: Ib930e82d55cb0257357a222ce9131e6e53372c03
These helpers will work similar to the WithTx method we have added to
our dbx.DB instances, but it will use crdb.ExecuteTx or crdb.ExecuteInTx
when the backend is CockroachDB, so that transactions are retried
correctly.
Anything that uses transactions and might need to work against
CockroachDB needs to handle "RetriableError" from cockroachdb by
restarting the transaction. This will probably be a large pain if not
using these helpers or something very like them.
Subsequent changes will undertake transforming all db-transaction uses
in satellite code so that they are cockroach-safe.
Change-Id: I648b8de2168612c67b9d6eb8402bccf8286249a9
Remove starting up messages from peers. We expect all of them to start,
if they don't, then they should return an error why they don't start.
The only informative message is when a service is disabled.
When doing initial database setup then each migration step isn't
informative, hence print only a single line with the final version.
Also use shorter log scopes.
Change-Id: Ic8b61411df2eeae2a36d600a0c2fbc97a84a5b93
storing live accounting in memory will not work, as the core and api each create
their own instance. Using redis will allow each to access the same store
Change-Id: I4c8250b579d7b6b6d8991bc890894573626effe6
For improving the deletion performance we are shifting the
responsibility to delete the pieces of the object from Uplink to the
Satellite.
BeginDeleteObject was the first call to return the stream ID which was
used for after retrieving the list of segments and then get addressed
order limits for deleting the pieces (of each segment) from the storage
nodes.
Now we want the Satellite deletes the pieces of all the object segments
from the storage nodes hence we don't need anymore to have several
network round trips between the Uplink and the Satellite because the
Satellite can delete all of them in the initial BegingDeleteObject
request.
satellite/metainfo.ListSegments has been changed to return 0 items if
the pointer of the last segment of an object is not found because we
need to preserve the backward compatibility with Uplinks that won't be
updated to the last release and they rely on listing the segments after
calling BeginDeleteObject for retrieving the addressed order limits
to contact the storage nodes to delete the pieces.
Change-Id: I5f99ecf27d62d65b0a062936b9b17581ef692af0
Remove direct dependency on uplink.RSConfig, this simplifies
moving the config file without introducing weird dependencies.
Change-Id: I7fd2a145401e0205d7047631df9d2810241efeec
Adds check to see if storage nodes are eligible to initiate
graceful exit, by checking their CreatedAt date and seeing if
their "age" is greater than the new config value:
NodeMinAgeInMonths
The default for this value is 6 months for now.
https://storjlabs.atlassian.net/browse/V3-3357
Change-Id: Ib807ab8987ddb5a38a27a83886490f73fe8c5816
This commit adds functionality to include the space used in the trash
directory when calculating available space on the node.
It also includes this trash value in the space used cache, with methods
to keep the cache up-to-date as files are trashed, restored, and
emptied.
As part of the commit, the RestoreTrash and EmptyTrash methods have
slightly changed signatures. RestoreTrash now also returns the keys that
were restored, while EmptyTrash also returns the total disk space
recovered. Each of these changes makes it possible to keep the cache
up-to-date and know how much space is being used/recovered.
Also changed is the signature of PieceStoreAccess.ContentSize method.
Previously this method returns only the content size of the blob,
removing the size of any header data. This method has been renamed
`Size` and returns both the full disk size and content size of the blob.
This allows us to only stat the file once, and in some instances (i.e.
cache) knowing the full file size is useful.
Note: This commit simply adds the trash size data to the piece size data
we were already collecting. The piece size data is not accurate for all
use-cases (e.g. because it does not contain piece header data); however,
this commit does not fix that problem. Now that the ContentSize (Size)
method returns the full size of the file, it should be easier to fix
this problem in a future commit.
Change-Id: I4a6cae09e262c8452a618116d1dc66b687f59f85
The default interval tries to balance:
1. ensure that most things run at least once during tests
2. ensure that they won't run over 10 times
Change-Id: I911b57b595ffbef1963654bf4a42efad1534b058
Close a peer didn't guarantee that the peer ended its services and we
want that when a StopPeer method returns the peer service is actually
finished.
Change-Id: If97f41b7e404990555640c71e097ebc719678ae7
