This change tracks signup captcha scores in the signup_captcha column in the users table.
It slightly modifies the captcha verify method to return both the score and success.
see: https://github.com/storj/storj/issues/5067
Change-Id: I7b3993e44958cfcf179806c7df19d6887fe3eda9
Use the provided ConstraintViolation method of the pgutil package rather than importing jackc pgxerrcode directly.
Change-Id: I4e86713000b3f5f0aadd54beee8ee239f0c8df8e
Following the changes made to fix the storage usage graph
on the storagenode dashboard, we added a new
interval_end_time column to the accounting_rollups table.
We noticed a two-day delay in the graph, turns out the sub-query
was wrong due to the conflicting interval_end_time column
in both tables so we have to explicitly state which table
column we are referring to.
Also, set the default for interval_end_time in the accounting
rollups to the start_time if the interval_end_time is null
which will be removed once we backfill the column and alter
it to be a non-nullable column.
Updates https://github.com/storj/storj/issues/4178
Change-Id: Iff32b261d07b6ee219d2b6b6542377f0c54633a1
Database migration tests are rather slow, reduce them to
only the last 10 migrations, which should be sufficient.
Change-Id: Ib9d964fe6ec86ddeeef26c66b6ea9207b7868855
The signup_captcha column will hold the captcha scores of new users.
see: https://github.com/storj/storj/issues/5067
Change-Id: Ia322af29a3b5b019b417843272506a3dbd1397e4
This is in response to community feedback that our existing reputation
calculation is too likely to disqualify storage nodes unfairly with
extreme swings up and down.
For details and analysis, please see the data_loss_vs_dq_chance_sim.py
tool, the "tuning reputation further.ipynb" Jupyter notebook in the
storj/datascience repository, and the discussion at
https://forum.storj.io/t/tuning-audit-scoring/14084
In brief: changing the lambda and initial-alpha parameters in this way
causes the swings in reputation to be smaller and less likely to put a
node past the disqualification threshold unfairly.
Note: this change will cause a one-time reset of all (non-disqualified)
node reputations, because the new initial alpha value of 1000 is
dramatically different, and the disqualification threshold is going to
be much higher.
Change-Id: Id6dc4ba8fde1be3db4255b72282207bab5491ca3
Adding an index to the timestamp field of the billing transaction table to improve query performance. This should prevent having to do a full table scan when we query for the last billing transaction of a particular source and/or type.
Change-Id: I581f09494cc8662a12efba4302022a07121ba309
Adding an index to the wallet address field of the storjscan wallet table to improve query performance. This should prevent having to do a full table scan when we query for one or more wallet addresses for a given user in our queries.
Change-Id: Ic1b5d06c2258489e5464d186fed5270172f8cba5
The new dashboard currently gets stuck on loading and displays an error when
it fails to get usage data. Failure happens on satelliteDb due to a cockroach transaction error
caused by reading data before using AS OF SYSTEM TIME in the same transaction.
This change reverses the order of daily usage queries to avoid this error.
And hides the loaders on the dashboard if/when an error occurs.
see: https://github.com/storj/storj/issues/5012
Change-Id: I06b6ee434f72242f9b7d21dec7aaf39d1d622f1e
I don't know why the go people thought this was a good idea, because
this automatic reformatting is bound to do the wrong thing sometimes,
which is very annoying. But I don't see a way to turn it off, so best to
get this change out of the way.
Change-Id: Ib5dbbca6a6f6fc944d76c9b511b8c904f796e4f3
During an update to the billing DB, there is a special case failure that can occur if multiple updates to the table happen concurrently. In this case, the update would normally fail silently due to the balance constraint during update, and the subsequent insert for a new record fails because the user already exists in the table. The solution for this case, is to simply retry the insert with some limit to prevent infinite loops.
Change-Id: Ibe70fec2c386c25bd2484fe91f49a6a962357706
Update the billing table to use generated IDs, to include the source and status fields, and to add metadata jsonb field that can be used for fields specific to a particular type of billing transaction. Additionally a new table was added to keep track of user balances
Change-Id: Ieb3a63aafd8fe21fc3386bafd43d52081b7d2838
satellite/{payments/billing,satellitedb}: refactor billing DB
Update the billing table to use generated IDs, to include the source and status fields, and to add metadata jsonb field that can be used for fields specific to a particular type of billing transaction. Additionally a new table was added to keep track of user balances
Change-Id: Ieb3a63aafd8fe21fc3386bafd43d52081b7d2838
Adding an interval_end_time column to the accounting_rollups table
to keep the last interval_end_time for each daily storage tallies.
Updates https://github.com/storj/storj/issues/4178
Change-Id: If7a8210c5e9fe2fc9df84b137a8b6e3db2471c58
Currently we have a significant number of tallies that need to be
deleted together. Add a limit (by default 10k) to how many will
be deleted at the same time.
Change-Id: If530383f19b4d3bb83ed5fe956610a2e52f130a1
Some nodes were added to the nodes table due to a bug in quic
based storagenode contact code. This is a tool to clean up these nodes.
Delete with batch-size 1k seems to take ~400ms on local CockroachDB.
Change-Id: Ic0c1180528c27952e19c431fc9cc327292a10a5f
Add payments method to payments to DepositWallets interface.
Exposes payments retrieval API for a particular wallet to
other systems such as console billing API.
Change-Id: Ifcb3a35514aab50be00f6360007954980b5d8b38
The users.Update method in the satellitedb package takes a console.User
as an argument. It reads some of the fields on this struct and assigns
the value to dbx.User_Update_Fields. However, you cannot optionally
update only some of the fields. They all will always be updated. This means
that if you only want to update FullName, you still need to read the
user info from the DB to avoid updating the rest of the fields to zero.
This is not good because concurrent updates can overwrite each other.
This change introduces a new struct type, UpdateUserRequest, which
contains pointers for all the fields that are updated by satellite db
users.Update. Now the update method will check if a field is nil before
assigning the value to be updated in the db, so you only need to set the
field you want updated. For nullable columns, the respective field is a
double pointer. This allows us to update a column to NULL if the outer
pointer is not nil, but the inner pointer is.
Change-Id: I27f842d283c2711e24d51dcab622e57eeb9157f1
There are multiple entries in the users table with the same email
address. This is because in the past users were able to register
multiple times if the email was not verified. This is no longer
the case. If a user tries to register with an unverified email
already in the DB, we send a verification email instead of
creating another entry. However, since these old entries in the
table with duplicate emails were never cleaned up, the email
reminder chore will send out email verification reminders to them.
A single person will get one separate email per entry in the DB
with their email and where status = 0.
Since the multiple entries with the same email problem was solved
a while ago, just add a constraint to GetUnverifiedNeedingReminder
to only select users created after a cutoff. Once the DB is
migrated to remove the duplicate emails, we can remove the cutoff.
github issue: https://github.com/storj/storj/issues/4853
Change-Id: I07d77d43109bcacc8909df61d4fb49165a99527c
The ApplyUpdates() method on the reputation.DB interface acts like the
similar Update() method, but can allow for applying the changes from
multiple audit events, instead of only one.
This will be necessary for the reputation write cache, which will batch
up changes to each node's reputation in order to flush them
periodically.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I44cc47767ea2d9423166bb8fed080c8a11182041
Updated daily project usage query to return correct allocated traffic.
If allocated egress has expired then we return settled egress.
If not then we return allocated egress - dead egress.
Fix for this issue
https://github.com/storj/storj/issues/4563
Change-Id: Ia15a50d3bb8d8cb1106936e17dbe0f1f5a40fa87
Fixed daily usage query returning single bucket usage.
We sum up bucket usages now.
Also fixed https://github.com/storj/storj/issues/4559.
Change-Id: I2eb6299f1ef500d68150879195011b6fbb5f37ed
Add billing DB to the satellite. This DB will hold all transactions on the users account and can be used to compute the users current usable account balance.
Change-Id: I056416efc169e5e5e30c9f30cd8bc766b7bc8073
This has been a cause of some confusion, even though the fields are
labeled as being copies of config values.
Having them be under a field explicitly named "Config" makes this
clearer, plus, allows the values to be passed in simply as a copy
of the Config struct from the satellite, rather than copying the fields
individually (which can be error-prone, particularly as the AuditCount
field in UpdateRequest is apparently not the same thing as the
AuditCount field in reputation.Config).
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I386953347b71068596618616934aa28e3245cdc1
Add storjscan wallets DB to the satellite. For now this DB is a one to one mapping of the users account to a storjscan wallet that can be used by the account holder to make payments on their Storj account.
relates to https://github.com/storj/storj/issues/4347
Change-Id: I6e65b15817b90ceb75641244f9bf173c3b4228a7
The two protobuf types are identical except that one is in our common/pb
package, and the other is in internalpb. Since the type is public
already, and there is no difference in the internal one, it seems better
to use the public one for all satellite needs.
There is also another type which is essentially identical, but which is
not a protobuf type, also called "AuditHistory". It looks like we don't
ever actually need to have a separate type from the protobuf one.
This change makes us use "storj/common/pb".AuditHistory for all of our
AuditHistory needs.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: If845fde21bb31c801db6d67ffc9a146d1617b991
This functionality will be needed in both packages, so here we move it
into the more general reputation-code package and export it for use in
satellitedb.
This also removes the related UpdateAuditHistory() signature from the
reputation DB interface, since it doesn't have anything to do with the
db. It doesn't need to be a method, either.
Finally, this changes the test for addAudit to be a plain test function
instead of using testplanet.Run(). It didn't need a whole testplanet
setup or any databases.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I90f6a909e5404f03ad776b95cfa2f248308c57c1
Márton found out that DROP DATABASE is rather slow on CRDB, and it makes
a significant impact when running the whole testsuite. In sum of test
times it's ~2.5h compared to ~2h. And the end-to-end ~20m to ~16m.
This adds a new flag STORJ_TEST_COCKROACH_NODROP for enabling this
behavior in the CI environment.
Fixes https://github.com/storj/dev-enablement/issues/6
Change-Id: I5a6616c32dc6596a96ba3d203f409368307d7438
This will let us update our reputation cache when writing through to the
db.
Since the information is already being fetched from the db and returned
to the application, the extra cpu load here should be minimal.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I2b8619f2c0d541893c7d3e7d33b1863b96775ebd
We want to remind unverified users to verify their emails:
once after 24 hours has passed and again after 5 days has passed.
Add mailservice.Service to satellite core because it is needed by the
chore for sending emails. To add the mailservice.Service to the core,
we create a helper function in satellite/peer.go to avoid duplicating
the code in both api.go and core.go. In addition to the chore, this
change adds methods to users.DB to get unverified users in need of
reminder.
Change-Id: I4e515bdf43f922788b4f965b2efb34fa32288bd1
We added nodes.disqualification_reason recently, but we didn't add a
corresponding column in the reputations table (despite having a
corresponding `disqualified` column there).
Without this change, the (very useful and informative) assignments to
updateFields.DisqualificationReason in reputations.go have no effect.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I77404902ca64b56aed72f1de76b303fe82b76aab
When a new user registers, we send a verification request to their
email. Currently, if they do not verify their email, we take no further
action. We want to send these users reminders: one after about one day
and one after about 5 days. To do this we will use this new
verification_reminders column.
It will look something like this:
```
SELECT email FROM users
WHERE status = 0
AND (
(verification_reminders = 0 AND created_at < now() - 'INTERVAL 1d')
OR (verification_reminders = 1 AND created_at < now() - 'INTERVAL 5d')
)
```
Change-Id: If0620e08c97e9e337c9563481d665c5bd462693b
Fix for this customer issue
https://github.com/storj/customer-issues/issues/34
By this change we fetch bucket usage since its creation instead of using project's createdAt timestamp.
Change-Id: Ic0ea5d169056a5bd64ed143d13954d794da6e1d2
Things that make debugging easier.
* Added logging to automatic link clicking to make it obvious, when it
fails.
* Added monitoring to oidc.
* Made dbx create calls noreturn for oauth_*
Change-Id: I37397b4e84ce5bfd82954aed9c38fdfd52595f24
We were already able to override (or not) metadata with this method
but to be explicit we are introducting new option to control storing
metadata with object. Separate option should be less error prone.
https://github.com/storj/team-metainfo/issues/105
Change-Id: I4c5bce953a633a0009b05c5ca84266ca6ceefc26
Last part of backwards compatible db migration to remove "suspended" column.
Removes exeption which removes "suspended" column in tests from `migrate_test.go`.
Adds DB migration to remove "suspended" column from 'nodes' and 'reputations' tables.
Change-Id: I02051279f6f4181e966c567919af0e774583f165
Set disqualification reason when reputations stats are updated on DB.Update.
Added tests for DisqualifyNode and for disqualification cases which happens during Update.
Change-Id: I00130ab5d9722422805159ad2f183c205de60f7e
Attribution is attached to bucket usage, but that's more granular than
necessary for the attribution report. This change iterates over the
bucket attributions, parses the user agent, converts the first entry
to lower case, and uses that as the key to a map which holds the
attribution totals for each unique user agent.
Change-Id: Ib2962ba0f57daa8a7298f11fcb1ac44a8bb97875
Migrate free tier users to have default limits if their limits were set to 0.
They were affected by incorrect working of Update user query.
Change-Id: I4c49c8d99b12dba2b9b0ab61b2175085976dcc95
Added failed_login_count and login_lockout_expiration columns to users table to control users failed login attempts.
We want to prevent brute forcing of user login so this is the first step.
Change-Id: I06b0b9f5415a1922e08cd9908893b2fd3c26bca0
Before, the VA query was summing the total and dividing by the number of
rows. This gives the average bytes stored per hour, but we charge for
usage with byte-hours. Why not do value attribution the same way?
To do that, we don't divide by the number of rows. We also have object
and segment fees so return segment-hours and object-hours too.
Change-Id: I1f18b7e1b2bae1d3fae1ca3b93bfc24db5b9b0e6
This sets the corresponding _numeric columns to be NOT NULL (it has been
verified manually that there are no more NULL _numeric values on any
known satellites, and it should be impossible with current code to get
new NULL values in the _numeric columns.
We can't drop the _gob columns immediately, as there will still be code
running that expects them, but once this version is deployed we can
finally drop them and be totally done with this crazy 5-step migration.
Change-Id: I518302528d972090d56b3eedc815656610ac8e73
We are in the process of creating an api to allow users to manage their
accounts programmatically. We would like to use api keys for
authorization. We were originally going to create an entirely new table
for these api keys, but seeing as we already have 2 other tables for
keys/tokens, api_keys and oauth_tokens, we thought it might be better to
use one of these. We're using oauth_tokens.
We create a new oidc.OAuthTokenKind for account management api keys:
KindAccountManagementTokenV0. We made the key versioned because we
likely want to improve the implementation in the future, but we want to
get something functional out the door ASAP because the account management
api feature is highly desired.
Add a new method to oidc.OAuthTokens interface for revoking v0 account
management api keys, RevokeAccountManagementTokenV0. Add update method
to dbx implementation to allow updating the expiration. We will revoke
these keys by setting the expiration to 0 so they are expired.
Change-Id: Ideb8ae04b23aa55d5825b064b5e43e32eadc1fba
We have an issue with latest CRDB. Single query cannot modify
the same table multiple times. Now build is blocked.
This change is unblocking build by:
* adjusting query for inserting into repair queue
* temporary removing code for deletion for server-side copy
* temporary disable backward compatibility tests for CRDB
Change-Id: Idd9744ebd228e5dc05bdaf65cfc8f779472a975d
Remove redundant suspension timestamp column from nodes and reputation tables.
Suspended timestamp was moved to unknown_audit_suspended and suspended column is
no longer used so there is no point in keeping both.
Change-Id: Ieea3f12141b33ec9efe7594f4c9dbc7e10675b0e
When performing re-authorizations for OAuth, we need to pull up an
APIKey using it's project id and name. This change also updates the
APIKeyInfo struct to return the head value associated with an API
key.
Change-Id: I4b40f7f13fb9b58a1927dd283b42a39015ea550e
Update the user to the default paid tier project limit, which is currently 3 projects, when the user upgrades to a paid account.
Change-Id: I95b19d62cebc7d878b716355f2ebcaf0b51ca3f7
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
We decided that we want to have segment limit for paying users high
enough to not have to change it too often.
Fixes https://github.com/storj/storj/issues/4590
Change-Id: Ic1c38bf3e2fcc000548ff4c7e7004647b39fbecf
Added new projectaccounting query to get project's single bucket usage rollup.
Added new service method to call new query.
Added implementation for IsAuthenticated method which is used by new generated API.
Change-Id: I7cde5656d489953b6c7d109f236362eb465fa64a
Add a RepairExcludedCountryCodes config flag for overlay for providing a list of country codes to exclude nodes from target repair selection.
Mark segments with less than repairThreshold pieces in countries not in the RepairExcludedCountryCodes as not healthy.
With this change, the repair process is not affected. The segment will be removed from the repair queue by the repairer.
Another change will handle the logic at the repairer level.
Fixes https://github.com/storj/team-metainfo/issues/95
Change-Id: I9231b32de117a116488de055a3e94efcabb46e81
Remove special characters from the test database name to improve
compatibility with external tools like the Cockroach web gui.
Change-Id: I3a6a368a5051e3064e7279b14eec4f2d4ff3c435
All code on known satellites at this moment in time should know how to
populate and use the new numeric columns on the
stripecoinpayments_tx_conversion_rates and coinpayments_transactions
tables in the satellite db. However, there are still gob-encoded
big.Float values in the database from before these columns existed. To
get rid of those values, so that we can excise the gob-decoding code
from the relevant sections, however, we need something to read the gob
bytestrings and convert them to numeric values, a few at a time, until
they're all gone.
To accomplish that, this change adds two chores to be run in the
satellite core process- one for the coinpayments_transactions table, and
one for the stripecoinpayments_tx_conversion_rates table. They should
run relatively infrequently, so that we do not impose any undue load on
processing resources or the db.
Both of these chores work without using explicit sql transactions, but
should still be concurrent-safe, since they work by way of
compare-and-swap type operations.
If the satellite core process needs to be restarted, both of these
chores will start scanning for migrateable rows from the beginning of
the id space again. This is not ideal, but shouldn't be a problem (as
far as I can tell, there are only a few thousand rows at most in either
of these tables on any production satellite).
Change-Id: I733b7cd96760d506a1cf52735f598c6c3aa19735
For a thorough explanation of the overall transition, see the message on
commit c053bdbd70.
This change will rename the columns containing gob-encoded big.Floats
and add new columns which will contain the equivalent data in a more
sql-friendly format.
The change should *not* break already-running satellite processes,
because all functionality touching these tables has already been taught
to work with these new columns if it sees any "undefined column" errors.
Change-Id: I229324376533e383c5d05064b8aedad149cf825b
This change adds some more checks to the deletion process for projects and
users, since we ran into a race condition during invoicing, where projects
have been deleted before the invoicing was finished, leading to missing
references.
This PR changes the logic to block user deletion if we are in exactly that period,
while also allowing the deletion of projects/users on free tier during the month.
Change-Id: Ic0735205e6633762fb7e3c2fa13e744cdfa5ec32
Finished implementing queries for both bandwidth and storage using pgx.Batch.
Fixed CSP styling issue.
Change-Id: I5f9e10abe8096be3115b4e1f6ed3b13f1e7232df
We have here two migrations in fact. One is for existing users,
we need to check if its paying user (paid_tier) and set 1M for
them and 150K for others.
Second migration is to set limits for projects depends on owner.
If owner is a paying user (paid_tier) then project should have
1M limit, otherwise it should be 150K. In this case to make
migration faster initially projects table segment_limit was set
to 1M by default. With migration we are selecting all paying
users and we are setting 150K limit for all projects which owners
are not in paying users set.
Initially we had a concern if that query wil lbe quick enough to
be executed during deployment but after investigation CRDB
team confirms that this should take seconds for out DBs.
Fixes https://github.com/storj/team-metainfo/issues/70
Change-Id: I8be06e9f949b68b993e043cc15525e8483bf49ea
Implemented endpoint and query to get bandwidth chart data for new project dashboard.
Connected backend with frontend.
Storage chart data is mocked right now.
Change-Id: Ib24d28614dc74bcc31b81ee3b8aa68b9898fa87b
A few months ago we removed all references to the contained
column in nodes and reputations
bb21551a9c
and
56fe636123
But we never did the migration to drop the columns.
This commit will finally do that.
Change-Id: I82aa2f257b1fb14a2f1c4c4a1589f80895360ae4
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
Batching of the order submissions can lead to combining the allocated
traffic totals for two completely different time windows, resulting
in incorrect customer accounting. This change will group the batched
order submissions by projectID as well as time window, leading to
distinct updates of a buckets bandwidth rollup based on the hour
window in which the order was created.
Change-Id: Ifb4d67923eec8a533b9758379914f17ff7abea32
We want to issue a reminder to users when they don't verify their email within 24hrs of registering. This change only adds a column to the users table.
Change-Id: I92e2baeabf179338ffec01574d4752c0ccdba88b
All limits we have for projects have also parent limits stored
with user data. New created project is first taking limits from
owner (user) limits.
This change is extending users table with project_segment_limit
column and adds functionality to get and set value for this
column.
Change-Id: Iff5e36c62b517652390b649fc05992475916ecff
Exposes functionality to get and update project segment
limit. It will be used to limit number of segments per project
while uploading object.
Change-Id: I971d48eebb4e7db8b01535c3091829e73437f48d
We want to set maximum number of segments per
project. This change adds only column to projects table.
Default value 1M is set to make later migration easier as
we need to set 1M for paid tier users and 140K for free
tier users.
Change-Id: I8e83712e08c5bd91dfa59f652d17e45c14240a36
Added new query to get project object and segment count.
Added appropriate object and segment count view for new project dashboard.
Change-Id: I69a2e55442f318c51dc365c0c578b964f2f06c7f
This reverts commit 2c0a360a14.
Avoid big transactions. We'll do it outside of the migration pipeline.
Change-Id: Iade810d81bb2453c9e351149cb84662b207ee527
Value attribution codes were converted into UUIDs and stored in the users, projects, api_keys, bucket_metainfos, and value_attributions tables in the partner_id column. This migration will lookup the appropriate partner name associated with each of these UUIDs, and store the partner name directly in the user_agent column within each table. If an error occurs during the partner ID to partner name conversion, the partner ID value will be migrated to user_agent.
A note on the migration test data, postgres.v182.sql:
With one exception, all preexisting rows in the relevant tables had a NULL partner_ID. Therefore, we needed to insert new rows with partner_ID set under the OLD DATA section in order to test that the migration works. For each affected table, we insert one row with a valid partner ID which has a corresponding partner name, and one row with a partner ID which would return an error during the conversion to the partner name.
Change-Id: Iad977d72df0ce95a0c5ca80a065c4276ec1f2354
The main motivation is to wrap the bucket DB and metainfo DB, so we
could check if a bucket is empty before applying geofencing config.
Change-Id: I8bac21555e01d51a663fb557bc1acfc8106bc2e1
To allow for changing limits for new users, while leaving existing users limits as they are, we must store the project limits for each user. We currently store the limit for the number of projects a user can create in the user DB table. This change would also store the project bandwidth and storage limits in the same table.
Change-Id: If8d79b39de020b969f3445ef2fcc370e51d706c6
Alter satellites DB nodes table to add `disqualification_reason` int column
which contains disqualification type enum of why node has been disqualified.
Change-Id: Ia514557018ca27e1984216dc5004346d59869d16
We had a bug in the stray nodes chore where nodes who had not been seen
in several months were not being DQd. We figured out that this was
happening because we were using two queries: The first to grab
nodes where last_contact_success < some cutoff, the second to DQ them
unless last_contact_success == '0001-01-01 00:00:00+00'. The problem
is that if all of the nodes returned from the first query had
last_contact_success of '0001-01-01 00:00:00+00', we would pass them to
the second query which would not DQ them. This would result in the stray
nodes DQ loop ending since we found a number of nodes to DQ less than the
limit.
The fix: add the "WHERE last_contact_success != '0001-01-01
00:00:00+00'::timestamptz" to the selection query.
Change-Id: I4e60de90b68d8745d641b4467c2b23e0e56f7dff
Even though we want to start charging segment fee instead of object fee,
it's hard for users to understand what a segment is. This PR adds the
object count back in the UI alongside with segment count to help address
the issue.
Change-Id: I92eb42c769d350eba68a72443deffec5c278359c
table and drop not null constraint on objects column
Since, we want to move from charging our customers by object count to
segment count, this PR prepares the database to be able to record segments count
instead of objects count for satellite's billing system
Change-Id: Ie91ef354e78d24a268bc1cdc4327c182f733321e
listPendingTransitionShim is a temporary transition shim intended to
make existing API processes keep working when a future DB schema change
is executed. For more explanation, see the message on commit c053bdbd70.
However, the shim has a small bug: it is missing the ORDER BY clause
that appears in the original ListPending method. This transition shim
code won't ever run until we make the DB schema change, so this bug
hasn't hurt anything yet; it's just important that we fix it before the
DB schema change happens.
Change-Id: I5953651583ee236500c2c07141dfc9d690a95118
This update is to set up users being able to register with a promo code added to their account in place of the free tier coupon.
Change-Id: I7badf87937b12664f145520b6dcc4b26fe750407
We don't need column uses_segment_transfer_queue in graceful_exit_progress
as now all exiting nodes are using graceful_exit_segment_transfer_queue and
table graceful_exit_transfer_queue has been dropped.
Change-Id: I4b7c087433f04138cf09bcf8ad3d8de2c185502a
Multipart upload limits added. Last part has no size limit.
Max number of parts: 10000, min part size: 5 MiB
Change-Id: Ic2262ce25f989b34d92f662bde720d4c4d0dc93d
Union query for both reputable and new nodes didn't properly work. The
top level query is required to have an `AS OF SYSTEM TIME` statement as
well.
Change-Id: I8ee6dd5b700c2b1ed2aa562962bfa72be7eec30a
Uplink needs only part of columns we are reading from DB.
To improve performance we should read only those that are
realy needed.
Change-Id: Ib39259318169c46afe5fa4c6ce2184da82e960c8
We don't use this column for anything. If you want to know if a node is
contained, you can check the pending_audits table.
Change-Id: I5671722a5fc6e1749d3a49e187a56556000ff941
We don't use this column for anything. If you want to know if a node is
contained, you can check the pending_audits table.
Change-Id: I8da1d8e01a2dcaff63c5067a7927b5451424ad04
Removes database tables and functionality related to our custom
coupon implementation because it has been superseded by the Stripe
coupon and promo code system. Requires implementations of the
payments Invoices interface to return coupon usages along with
invoices.
Change-Id: Iac52d2ff64afca8cc4dbb2d1f20e6ad4b39ddfde
Cockroach doesn't like concurrent database creation, add a limiter to
avoid overloading the database.
Also limit the cockroach testing to the last 10 migrations.
Change-Id: Ie73c516ac2d362b251f605049e51eb25888432bd
Populate the egress_dead column for taking into account allocated bandwidth that can be removed because orders have been sent by the storage nodes. The bandwidth not used in these orders can be allocated again.
Change-Id: I78c333a03945cd7330aec052edd3562ec671118e
Drop table graceful_exit_transfer_queue which is not used anymore (replaced by graceful_exit_segment_transfer_queue).
Change-Id: Ie254fe9a54fb0784e350a439ce7a9bc99a3a58b5
Migration tests are very heavy on database schema changes, which may
cause delays and retries. Separate out the migration tests and ensure
that they do not run concurrently on the same database.
Change-Id: I35b17525f18fd923546ce1fcc12d805c95073b6b
Why: big.Float is not an ideal type for dealing with monetary amounts,
because no matter how high the precision, some non-integer decimal
values can not be represented exactly in base-2 floating point. Also,
storing gob-encoded big.Float values in the database makes it very hard
to use those values in meaningful queries, making it difficult to do
any sort of analysis on billing.
Now that we have amounts represented using monetary.Amount, we can
simply store them in the database using integers (as given by the
.BaseUnits() method on monetary.Amount).
We should move toward storing the currency along with any monetary
amount, wherever we are storing amounts, because satellites might want
to deal with currencies other than STORJ and USD. Even better, it
becomes much clearer what currency each monetary value is _supposed_ to
be in (I had to dig through code to find that out for our current
monetary columns).
Deployment
----------
Getting rid of the big.Float columns will take multiple deployment
steps. There does not seem to be any way to make the change in a way
that lets existing queries continue to work on CockroachDB (it could be
done with rules and triggers and a stored procedure that knows how to
gob-decode big.Float objects, but CockroachDB doesn't have rules _or_
triggers _or_ stored procedures). Instead, in this first step, we make
no changes to the database schema, but add code that knows how to deal
with the planned changes to the schema when they are made in a future
"step 2" deployment. All functions that deal with the
coinbase_transactions table have been taught to recognize the "undefined
column" error, and when it is seen, to call a separate "transition shim"
function to accomplish the task. Once all the services are running this
code, and the step 2 deployment makes breaking changes to the schema,
any services that are still running and connected to the database will
keep working correctly because of the fallback code included here. The
step 2 deployment can be made without these transition shims included,
because it will apply the database schema changes before any of its code
runs.
Step 1:
No schema changes; just include code that recognizes the
"undefined column" error when dealing with the
coinbase_transactions or stripecoinpayments_tx_conversion_rates
tables, and if found, assumes that the column changes from Step
2 have already been made.
Step 2:
In coinbase_transactions:
* change the names of the 'amount' and 'received' columns to
'amount_gob' and 'received_gob' respectively
* add new 'amount_numeric' and 'received_numeric' columns with
INT8 type.
In stripecoinpayments_tx_conversion_rates:
* change the name of the 'rate' column to 'rate_gob'
* add new 'rate_numeric' column with NUMERIC(8, 8) type
Code reading from either of these tables must query both the X_gob
and X_numeric columns. If X_numeric is not null, its value should
be used; otherwise, the gob-encoded big.Float in X_gob should be
used. A chore might be included in this step that transitions values
from X_gob to X_numeric a few rows at a time.
Step 3:
Once all prod satellites have no values left in the _gob columns, we
can drop those columns and add NOT NULL constraints to the _numeric
columns.
Change-Id: Id6db304b404e6fde44f5a8c23cdaeeaaa2324f20
Why: big.Float is not an ideal type for dealing with monetary amounts,
because no matter how high the precision, some non-integer decimal
values can not be represented exactly in base-2 floating point. Also,
storing gob-encoded big.Float values in the database makes it very hard
to use those values in meaningful queries, making it difficult to do
any sort of analysis on billing.
For better accuracy, then, we can just represent monetary values as
integers (in whatever base units are appropriate for the currency). For
example, STORJ tokens or Bitcoins can not be split into pieces smaller
than 10^-8, so we can store amounts of STORJ or BTC with precision
simply by moving the decimal point 8 digits to the right. For USD values
(assuming we don't want to deal with fractional cents), we can move the
decimal point 2 digits to the right.
To make it easier and less error-prone to deal with the math involved, I
introduce here a new type, monetary.Amount, instances of which have an
associated value _and_ a currency.
Change-Id: I03395d52f0e2473cf301361f6033722b54640265
This PR utilize the new burst limit column from projects table to allow
control on the limit for request per seconds and token bucket size
When no burst limit is explicitly set, rate limit is applied to both so
we don't limit how quickly request can be made in a second.
Change-Id: I883235c60c5d6416aeadd1c80ed2ebd193aa4d9f
In order to limit the amount of overall requests a user can issue in a
time span, we need to have the ability to define such limit separate
from per second request rate.
This PR adds a new column on the projects table to store the burst limit
per project.
Change-Id: I7efc2ccdda4579252347cc6878cf846b85146dc7
Remove the logic associated to the old transfer queue.
A new transfer queue (gracefulexit_segment_transfer_queue) has been created for migration to segmentLoop.
Transfers from the old queue were not moved to the new queue.
Instead, it was still used for nodes which have initiated graceful exit before migration.
There is no such node left, so we can remove all this logic.
In a next step, we will drop the table.
Change-Id: I3aa9bc29b76065d34b57a73f6e9c9d0297587f54
nodes and audit_history tables
This PR removes all code reference to audit_histories table and
```
audit_reputation_alpha, audit_reputation_beta,
unknown_audit_reputation_alpha, unknown_audit_reputation_beta,
```
columns from nodes table.
It also drops audit_histories table from the db since the code
that's referencing it currently are not being used.
Change-Id: Ifcda8db36afb3a333d487ff831f2fdefc8b02a4c
gracefulexit
With the effort to move audit related data into reputation store, this
PR updates gracefulexit endpoint to use reputation service to get a
node's audit score
Change-Id: Iad93ea689ad67ff9c57c7be16687e21e715fab7a
Currently, reputation table is only populated when a node has been
audited. This is ok in production, however a lot of our tests doesn't
upload any data or trigger audits.
This PR adds an initialization step in testplanet to populate reputation
table with zero value for nodes reputation.
Change-Id: I11b381236669db346dc68a48a6d4a27334a0a8b8
package in audit
This PR implements reputation store and replace overlay in audit service
to use such store for storing node's audit stats.
In order to keep the changeset smaller, most of the changes in this PR is for copying audit logic in overlay to
reputation package. In a following PR, the duplicating code will be
removed from overlay.
Change-Id: I16c12494a0970f44c422b26cf603c1dc489e5bc1
Added MFA passcode and recovery code field for token requests.
Added endpoints for MFA-related activity: enabling MFA,
disabling MFA, generating a new MFA secret key, and
generating new MFA recovery codes.
Change-Id: Ia1443f05d3a2fecaa7f170f56d73c7a4e9b69ad5
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration and made accessible through graceful exit db in another one.
This changes makes graceful exit enqueue transfer items for new exiting nodes in the new table.
Change-Id: I7bd00de13e749be521d63ef3b80c168df66b9433
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration.
This change gives access to this table.
Graceful Exit doesn't use the table yet, this will be done in a next change.
Change-Id: I6c09cff4cc45f0529813a8898ddb2d14aadb2cb8
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
Columns for MFA status, secret key, and JSON-encoded array of
recovery codes are added to the users table.
Change-Id: Ifed7e50ec9767c1670d9682df1575678984daa60
When a user adds a credit card, switch them to the paid tier and update
their projects with new bandwidth/storage limits. New projects for the
paid tier user will also have the updated limits.
The new limits are:
* storage per project - 50 GB free/25 TB paid
* bandwidth per project - 50 GB free/100 TB paid
Change-Id: I7d6467d077e8bb2bbe4bcf88ab8d75490f83165e
The previous query was making a full table scan. This modifies code to
do the queries separately on each action. It will probably be slower on
a small table, however there should be a several magnitude boost on
large tables.
Change-Id: Ib8885024d8a5a0102bbab4ce09bd6af9047930c9
We want to calculate bucket tally only from iterating objects.
Object currently has an info about totals for bytes and segments.
We need to adjust tallies to keep those totals. Older entries will
be untouched and code will use totals only if available. Change
is adding columns for totals to bucket_storage_tally table and
is adding general handling for them.
Next step is to start using total columns instead of inline/remote.
This will be done with next change.
Change-Id: I37fed1b327789efcf1d0570318aee3045db17fad
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
So that we can easily see whether a user is in the paid tier without
querying for payment methods.
Change-Id: I122566ddd0953203f852741fa12c71795bc1ec5c
Period end was calculated
incorrectly as it was still in current month but
should be the first day of next month.
Change-Id: I37451d29a9b901b69e6c3c401b333c58b3376d61
Adding AS OF SYSTEM TIME to query that is calculating project bandiwdth.
As an addition method for setting interval is added as test doesn't
work well with default interval.
Change-Id: Id1e15be4f6afff13b9dc2b7f595e2edb6de28db9
Currently, pending audit is finding segment by segment location
(path) because we want to move audit to segmentloop and we will
have only StreamID and Position we need to add columns for those
fields. Altering existing table can cause issues while
migration and deployment. Cleaner choise is to make new table.
This change contains migration with new segment_pending_audit
table that will replace pending_audits table and adjustments
to use new table in the code.
Table pending_audits will be dropped with next release.
Change-Id: Id507e29c152da594bac1fd812c78d7ecf45ec51f
table graceful_exit_segment_transfer_queue will be used to replace graceful_exit_transfer_queue. Currently, it uses the path of a segment to keep track of pieces to be transferred. As we want to use the segment metainfo loop, we will need to record stream_id and position of the segment instead of relying on object path.
This change also add a uses_segment_transfer_queue column to the graceful_exit_progress table to be able to know if a transfer has been initiated while using the old table.
Change-Id: Iafb1e8e65ba124e20de4a9ff76da181c3222de7e
Define service and DB interface for storing node reputation data
and updating the overlay cache.
Add overlay service and DB method UpdateReputation.
See https://github.com/storj/storj/pull/4144
Change-Id: Iedd8bd3274457d26c595919303d55327c1464b8c
The reputation table duplicates the reputation information in the
nodes table. It will be used for implementing the reputation
service.
Change-Id: I36c0318e8fa5f535e9d527df95b22a4f9eb365d4
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
The redis key associated to bandwidth usage depended on the current month.
This change makes it depends also on the day, so that we update bandwidth usage
daily to take into account changes associated to expired but not used allocated bandwidth.
It also add a test to to check that the allocated but not settled bandwidth is not counted after 2 days.
Change-Id: Iee9dbe3517cc3b9825438360b276a07a43dfbc64
Migration step for adding a 'egress_dead' column to the project_bandwidth_daily_rollups.
It will be used to track bandwidth allocation that won't be consumned
as the corresponding order has already been processed and has a settled
bandwidth amount lower than the order limit (allocated bandwidth).
Change-Id: Ic07592e69292ae2076e69f6038bb0e0fae79b271
Full prefix: web/satellite, satellite/{console, analytics, satellitedb}
- checkbox added to register view - business tab
- user being saved with new column
- add sales contact choice to Segment calls
- ui fix added to employee count dropdown
Change-Id: Ib976872463b88874ea9714db635d58c79cdbe3a1
We are not using this table so make no sense to put data there.
This change removes only code that is using this table. Before next
release we need to drop table with migration step.
Change-Id: I80f400aa778c717e70324bd00da502b7032c9d9f
Until now, whenever audits were recorded we would try to delete
the node from containment just in case it exists. Since we now
want to treat segment repair downloads as audits, this would
erroneously remove nodes from containment, as repair does not go
through a Reverify step. With this changeset, (Batch)UpdateStats
will not remove nodes from containment. The Reverify method will
remove all necessary nodes from containment.
Change-Id: Iabc9496293076dccba32ddfa028e92580b26167f
Because of recent changes to how coupons for the free tier are handled
(see commit 4c0817bcfb), we no longer want all these $10
non-expiring coupons. After coupons are applied during invoice
generation, if a customer does not have any valid (non expired, non
consumed) coupons, a new promotional coupon is applied.
We could just wait for users to consume all $10 of the non-expiring
coupons, and the new promotional coupon would be applied for the
following billing cycle, but this gets tricky, because if in the final
month, the user is billed for $1 of usage, but only $0.5 of the $10
non-expiring coupon is remaining, the user will be charged for the
remaining $0.5. With the new promotional coupon of $1.65, expiring every
month, this would not be an issue.
So long story short, this commit migrates all non-expiring coupons to
expire within 2 billing periods (all existing non-expiring coupons in
prod were created in early April or later). That way, there is still
enough value in the $10 coupon that we don't have to worry about
customers exceeding it, and the coupons will expire. Then we'll
immediately apply the $1.65 coupon for the next month! And then
hopefully this unfortunate situation will come to a pleasant end.
Change-Id: I8a593948d8876c41a71d886b9a95d4e2c802b4f3
Replace GetProjectAllocatedBandwidth by GetProjectBandwidth which calculates
used bandwidth from allocated and settled bandwidth recorded in the
project_bandwidth_daily_rollups table.
For each day in the month, if the allocated bandwidth is expired, it uses the
settled bandwidth for computing used bandwidth.
Change-Id: Ife723c6d5275338f470619631acb25930d39ac3c
project_bandwidth_daily_rollups table
We want to calculate used bandwidth better so we need to calculate it
from allocated and settled bandwidth. To do this we need first populate
this new table.
https://storjlabs.atlassian.net/browse/PG-56
Change-Id: I308b737bf08ee48ce4e46a3605697ab2095f7257
Improve UpdateCheckIn on a contended row:
name old time/op new time/op delta
UpdateCheckInContended-100x-32 2.29s ±55% 0.17s ±61% -92.45% (p=0.008 n=5+5)
Change-Id: I053ab9f1cff136c306e5fb57f5e355cdc0269a8c
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Initially metabase was developed separately and it was useful to have a
separate environment flag for tests, however, it's more convenient to
use the same as rest of the testsuite.
Change-Id: Ia4d79be27ce5911cbae68d57cdf0b30f63459444
Currently we were duplicating code for AS OF SYSTEM TIME in several
places. This replaces the code with using a method on
dbutil.Implementation.
As a consequence it's more useful to use a shorter name for
implementation - 'impl' should be sufficiently clear in the context.
Similarly, using AsOfSystemInterval and AsOfSystemTime to distinguish
between the two modes is useful and slightly shorter without causing
confusion.
Change-Id: Idefe55528efa758b6176591017b6572a8d443e3d
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
multiregion satellites have complex database connection strings
largely due to using a different backend for the repair queue than
cockroach.
billing stuff didn't work right with this.
Change-Id: Ie8759a8c47e71347c3a190abfc9d53945d7b8855
When audits are being recorded, we automatically add some SQL to remove
the node from the pending audits table in case it exists. They are
removed from pending audits even if the node was offline for the audit.
This is not the correct behavior.
Add statement to record audit results in reverify tests to ensure no
more false positives.
Change-Id: I186ae68bc5e7962ef6c5defbebc1d95e63596a17
The DBs of our production satellites have some indexes that we didn't
have in the migrations because at that time we weren't able to add them
because our migration test was not able to deal with Cockroach indexes
with the STORING clause.
We have recently modified the storj.io/private/dbutil/pgutil package to
support the CRDB STRORING clause, so we are adding the missing indexes
to our migrations for being able to have them if we have to recover a DB
from scratch or we deploy a new DB satellite.
Change-Id: I686ff84e5b4c02d9615f50fa531261363affefb8
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
The previously configured never-expiring coupon does not refill every
month. Eventually, even though it never expires, it will run out. This
commit makes several small changes to address this issue for the free
tier:
* Change the config for the promotional coupon to be $1.65 for 1 month
(the change from $10 to $1.65 is due to our recent pricing changes)
* Update PopulatePromotionalCoupons (PPC for brevity) to add promotional
coupons to users with expired and consumed coupons (all users with a
project and no active coupons should get a new coupon when PPC is called)
* Call PPC at the end of the `create-invoice-coupons` stage of invoice
generation - after current coupons are processed and expired/exhausted.
* Remove legacy admin functionality for PPC from satellite/console - we
do not currently use it, but if we did, it should be in satellite/admin
instead.
Change-Id: I77727b97bef972df32ebb23cdc05055827076e2a
For business accounts we need to track the sales contact.
It will be a question to business accounts during onboarding.
Change-Id: I8d101ce1b52091478dfb0ddd875e1cc717d765d3
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
When nodes check in for the very first time, if the satellite can't ping
them back, they are inserted into the nodes table with
last_contact_success of '0001-01-01 00:00:00+00'. If the stray nodes
chore runs before the node can fix their problem, they are DQd.
Solution: when DQing stray nodes, dont DQ where last_contact_success =
'0001-01-01 00:00:00+00'::timestamptz
Change-Id: I477a02d5ef85b2c930ed6b7d99a4d1995169bca8
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
The new default promotional coupon is $10/month, and doesn't expire.
This change also migrates the coupon.duration column over to the new
coupon.billing_periods, and switches to rely completely on
billing_periods.
Change-Id: Ic3341e9fa4040449bab5e66ca4ee2640b095cf3d
Currently we can have an error about duplicated entry while inserting into value_attributions table. This change is changing simple insert into insert that is doing nothing on conflict.
Change-Id: I3efd8dc0b63115e8e2ed8f4196ccf969ee942295
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
instead of only generating invoices for nodes that had some
activity, we generate it for every node so that we can find
and pay terminal nodes that did not meet thresholds before
we recognized them as terminal.
Change-Id: Ibb3433e1b35f1ddcfbe292c034238c9fa1b66c44
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
Previously we would select a limited number of nodes for DQ in a
CTE and run the update on that set in a single transaction. This
could lead to locking on the table, so instead we select and update
in separate transactions.
Change-Id: I1e802c0845e829eeadcee4fa382f58462515fdb1
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
The coupon_codes table will allow for administrators to create new promo
codes associated with coupon information (amount, duration, etc...).
A user will be able to enter a promo code (aka coupon code) in order to
apply a new coupon to their account. The coupon in the coupons table is
linked to the template defined in the coupon_codes table.
Change-Id: I50e49fa92afbc6aa9d01d8a895c069efb59e472b
Migration step 148 will cause errors because we missed some
references to the columns being dropped. Removing the step
altogether causes problems with backwards compatibility tests
because the change already exists in the latest release tag.
To circumvent, we change v148 to an empty migration.
Add methods FindTable and RemoveColumn in private/dbutil/dbschema
Change-Id: Ia527e95b88a88c5dc82800928ce6f8cfb879e334
cockroach is having problems with huge transactions and
having them complete before timeouts or whatever, so
do smaller transactions.
because we can have partial recording of payments which
are not unique, we have to do a thing where we read and
check if it already exists before writing. this is not
concurrency safe.
Change-Id: Ia7d59499a43ce6d70cb2a23754edbdd1b643ef1a
The new 'consistency ge-cleanup-orphaned-data' cli command deleted
orphaned transfer queue items, but not entries in the
graceful_exit_progress table. This will delete orphaned entries
from the exit progress table too.
Change-Id: I5f927aac1f258490678deaf179be92ccfe10fcd8
Turns out that many methods generated with dbx where not used at all.
Lets remove them.
As a next step we can think about dropping tables like:
* user_credit
* offer
Change-Id: Id6cda81a701348db2a6b8b26daa22ae9c4f87cb4
Pregenerate the database schema we should use for most tests.
Currently, Cockroach is slow with regards to migration and it's
better if it happens in as few transactions as possible.
This reduces test time from ~21min to ~15min.
Change-Id: Ife8117053e6b9ecf3c93fe63677edf15d4d7c254
Testing interfaces is slightly clearer when it's in the package needing
the database rather than each individual implementation.
Change-Id: I10334c214a205f7e510b939b4359a2214c4e060a
This PR removes all back-end related referral program code including the
marketing portal.
We will have a separate PR for front-end code and database migration to
drop `offers` and `usercredits` table
Change-Id: If59f952cddfe0558a7dc03a0eac7cc1081517f88
These changes are independently tracked on
https://github.com/storj/storj/tree/jt/migration-reorder
The point of this is to make the distributed column
migration, needed for SNO invoice generation, the very
next one, so we can release it as a point release.
Change-Id: I26e1c03629c4f079b9ad12485e2b71a715d82b3b
Limit bucket name lookup to date range of the calling methods since we only need distinct bucket names for that time period.
Adds new index and removes an index specific to project ID since it is no longer needed.
Change-Id: Ic07bbfb1c32280e0c0e39f8da020b284e1e5d974
Fix an issue due to copy-paste problem that made that the Graceful Exit
test to be flaky.
The test uses a time created at the beginning of the test for avoiding
to get undeterministic time differences due to the fact of the response
time variation by the DB queries, however some part of the test were
using a current time rather than this base time, so they have been
addressed.
Change-Id: I4786f06209e041269875c07798a44c2850478438
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
Add a command to the satellite for cleaning up the Graceful Exit (a.k.a
GE) transfer queue items of nodes that have exited.
The commit adds to the GE satellite DB a couple of new methods, and its
corresponding test, for performing the operations of the new command.
Change-Id: I29a572a59689d63b24990ac13c52e76d65aaa917
using redash i manually checked that the only times the sum of
the payments does not match the paid column is for 2020-12 and
if it does not match then there are no payments.
Change-Id: I71ce0571de7e38e21548d7d6757b25abc3bfa781
The rollup archiver chore moves bucket bandwidth rollups and
storagenode rollups that are older than a given duration
to two new archive tables.
Change-Id: I1626a3742ad4271bc744fbcefa6355a29d49c6a5
