Currently TextMaxVerifyCount flakes in some tests, try increasing the
sleep time to ensure that things are slow enough to trigger the error
condition.
Also pass ctx to all the funcs so we can handle sleep better.
Change-Id: I605b6ea8b14a0a66d81a605ce3251f57a1669c00
Use multipart upload to upload single object in parts in
parallel. Its using parallelism flag added earlier.
Change-Id: I45b531a5db43c86f0112a5e3bb4a83bc1d65650f
Now that the command has been run on all production satellites
(US1, AP1, EU1), we should not need it again.
Change-Id: I25a4ffb03a7172445d90a04ec539be36c4eb2c8e
Adds support for new uplink method DownloadObjectAt which
gives ability to download single object in parallel.
Change-Id: I8388653429992b0d24c383d17d7e90904203fe77
This command is intended to be run as part of invoice generation - it
iterates over Stripe customers, and applies the free tier coupon to any
customer who doesn't already have a coupon.
This way, we can ensure that all customers have at least the free tier
coupon before and after invoice generation, in case a different coupon
has expired.
Change-Id: I33a4aff9174049f9e051de53ef65298ca65ed688
this makes the distinction between an "access name" and
an "access value" and talks about which is expected for
commands. most are "access name or value".
Change-Id: I43c0043a17d37e89ab5f87388ae9e890a8b59958
this was just supposed to add parallel uploads/downloads
and it does do that, but i then found a bunch of bugs
with respect to path handling that i thought i had under
control. oops.
so this adds a ton of tests and tries to make the logic
in ulloc to be more consistent. almost all of the actual
file handling bits and knowledge happens in cmd_cp now
where it should belong.
additionally, the s3 command has the behavior that if your
bucket has the file s3://bucket/file, then executing
s3 ls s3://bucket/fi returns nothing. this change makes
uplinkng match that behavior even if i don't personally
like it.
a big portion of the weirdness is the concept introduced
that i've named "directoryish", which intends to capture
the behavior that if a user copies a file to that location
then the base name of the source should be appended on
rather than a direct copy. this concept is entirely a
based on the string value and not the actual filesystem
state. hence, the cp command is responsible for checking
if local paths are actually a directory, and adding a
trailing slash if necessary to make them "directoryish".
additionally, the empty key for a bucket and the empty
string for local paths are considered "directoryish".
Change-Id: I9120d18616fd813b29ff81beed4f5993caa99fb6
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
We made decision to avoid satellite shutdown when segment loop
will return error. Loop still can reeturn error but it will be logged
and we will make monitoring/alert around that error.
Change-Id: I6aa8e284406edf644a09d6b1fe00c3155c5430c9
There are some users in our QA satellite which are no longer in Stripe,
and there are some users in Stripe which are not on our QA satellite.
This change allows us to test the paid tier conversion script in QA
despite these problems.
Change-Id: If94c9e882327841d1fd294d75fd302e6a7feee41
To be sure we are comparing the same set of objects
and segments lets ignore objects and segments created
after processing was started.
Segmets without objects cannot be created in normal
way so we will have them only if we broke something in
the past.
Change-Id: I96c07caf9e5091775d4dc8dfc0fef2b08b87957c
This tool has two commands to execute. One is to 'report'
orphaned segments. Second to 'delete' orphaned
segments.
To find such segments tool is first finding all unique
segment stream ids. As a next step its removing from this
list stream ids of existing objects. What is left is a list of
orphaned segments.
Change-Id: I4a0ae3ad0b10a8d16572bfd22ac92cfa15ca19b3
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
The auth service has no way to remove access grant registrations that
lack expiration dates. We want to encourage people to set them, so as
to slow the rate at which the auth service DB fills up.
Change-Id: I1ccf629cd995dc184d2d90333166eab34d34ae07
We have implemented the paid tier, but it currently only handles new
users entering paid tier. It does not convert users who have already
added a credit card previously. We still want to convert these users'
project limits. This billing command can be run once to convert all old
customers with a credti card. Afterwards, we should be able to safely
remove it.
Change-Id: Ia496580b8e72ef436375b74f590fe57cca704fa8
The user must complete a reCAPTCHA in order to register.
ReCAPTCHA verification failure results in rejection of the
registration attempt.
Change-Id: I34ba7db414d756fd1aaebdc3d19cccbfc7fc1ea3
this changes globalFlags to be a ulext.External
interface value that is passed to each command.
rather than have the ulext.External have a Setup
call in the way that the projectProvider used to
we make all of the state arguments to the functions
and have the commands call setup themselves.
the reason it is in its own package is so that
cmd/uplinkng can import cmd/uplinkng/ultest
but cmd/uplinkng/ultest needs to refer to whatever
the interface type is to call the function that
creates the commands.
there's also quite a bit of shuffling around of
code and names. sorry if that makes it tricky
to review. there should be no logic changes, though.
a side benefit is there's no longer a need to do
a type assertion in ultest to make it set the
fake filesystem to use. that can be passed in
directly now. additionally, this makes the
access commands much easier to test.
Change-Id: I29cf6a2144248a58b7a605a7ae0a5ada5cfd57b6
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
Because of our free/paid tier plan, we do not need a paywall anymore. We
have not used it in a while, but still have leftover code laying around.
Change-Id: Iaea8c39faf042a2f7a6b837727bb135c8bdf2907
Expires_at column was added to segments table and
we need to migrate this value for existing segments
from corresponding objects. This standalone tool
will read all objects and if expires_at is set then
will send update query for this object segments.
Updates will be send in batches and in parallel.
Change-Id: I1fddf0af8cde0f560582d25c6d0e07a00b58e534
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
this implements the rm command which has to add
a Remove method to the fileystem interface and
implement it for local, remote and test filesystems.
Change-Id: Id41add28f01938893530aae0b4b73c8954e9b715
this adds a helper method to prompt for a line of
input using the clingy context to the global flag
state that errors if interactive mode is disabled.
Change-Id: Ie113c8920dfa4719e85cc24f11401d91b32812f9
this adds some stuff to ultest so that the set of
files created by a test can be inspected after so
that we can write some tests for the cp command
to observe that it does what it is supposed to do.
Change-Id: I98b8fb214058140dfbb117baa7acea6a2cc340e1
the directory was starting to get pretty large and
it was making it hard to pick concise names for
types and variables. this moves the location
stuff into a cmd/uplinkng/ulloc package, the
filesystem stuff into a cmd/uplinkng/ulfs package,
and the testing stuff into a cmd/uplinkng/ultest
package.
this should make the remaining stuff in cmd/uplinkng
only the business logic of how to implement the
commands, rather than also including a bunch of
helper utilities and scaffolding.
Change-Id: Id0901625ebfff9b1cf2dae52366aceb3b6c8f5b6
this adds a test framework with fake implementations of a
filesystem so that unit tests can be written asserting
the output of different command invocations as well as
the effects they have on a hypothetical filesystem and
storj network.
it also implements the mb command lol
Change-Id: I134c7ea6bf34f46192956c274a96cb5df7632ac0
This enables use of the --progress, --expires, and --metadata flags with
'uplink put'. These flags work similarly to their counterparts in the
'uplink cp' command.
Small difference from cp: "progress" is on by default in 'uplink cp',
but (for backwards compatibility) off by default in 'uplink put'.
Why: Requested by @Toyoo on the forum:
https://forum.storj.io/t/explicit-data-expiration-questions/13854/2
..and it's an easy addition to make.
Change-Id: Id20aedd3a280db43e4883338f92f6beec7a400de
This expanded format shows expiration times for objects and how much
custom metadata each object has.
This commit also organizes output formatting code together in one
section for simpler adjustments in the future.
Change-Id: Ica041c8a1de6ee73c104a0554c5c259e447536c4
