Use DownloadSelectionCache to avoid querying database for every
download.
This change only addresses downloads from users. The download selection
cache is not currently used for audit and repair.
Change-Id: I96a49e121dac0b4204f97592a63131edabd73fb5
This test had an effective config.Reputation.AuditCount = 0, meaning all
nodes that had _any_ positive audit results were considered vetted.
Because of that, only one node in the test setup was "new". And that
node was marked as being in GE, so could not be returned by node
selection.
The reason the tests still worked is because of the node selection rule
that says "if there are no new nodes at all, just get all reputable
nodes to satisfy the request".
This commit makes it so half of the nodes are vetted and half new, which
makes the test somewhat more interesting (and means we aren't
concentrating too much on testing details of behavior when AuditCount is
0).
Change-Id: I09157b7dc20ecaddd2a6e60cfe146e9186e3603b
prevent network enumeration by rejecting privateIPs in PingMe and
Checkin endpoints
Closesstorj/storj-private#32
Change-Id: I63f00483ff4128ebd5fa9b7b8da826a5706748c9
Set disqualification reason when reputations stats are updated on DB.Update.
Added tests for DisqualifyNode and for disqualification cases which happens during Update.
Change-Id: I00130ab5d9722422805159ad2f183c205de60f7e
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
Create global config to specify a list of country codes that should be
excluded from node selection during uploads.
This exclusion is not implemented when the upload selection cache is
disabled.
Change-Id: Ic41e8b4f18857a11045668eac23107da99668a72
Add a RepairExcludedCountryCodes config flag for overlay for providing a list of country codes to exclude nodes from target repair selection.
Mark segments with less than repairThreshold pieces in countries not in the RepairExcludedCountryCodes as not healthy.
With this change, the repair process is not affected. The segment will be removed from the repair queue by the repairer.
Another change will handle the logic at the repairer level.
Fixes https://github.com/storj/team-metainfo/issues/95
Change-Id: I9231b32de117a116488de055a3e94efcabb46e81
The database table got invalid input and the resulting error
was not checked. This adds updates that contain invalid fields
to trigger different errors.
Change-Id: Iacea32cbef5599aab562c88e4113073596cc9996
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
Currently the test threshold for unneeded node checkins are 30s.
The disqualification threshold was at 30s, which means, it was possible
for all the nodes to get disqualified.
Hopefully fixes#4267
Change-Id: I6b0a10c09b7fd90a9729794885c9e7a593781bad
We had a bug in the stray nodes chore where nodes who had not been seen
in several months were not being DQd. We figured out that this was
happening because we were using two queries: The first to grab
nodes where last_contact_success < some cutoff, the second to DQ them
unless last_contact_success == '0001-01-01 00:00:00+00'. The problem
is that if all of the nodes returned from the first query had
last_contact_success of '0001-01-01 00:00:00+00', we would pass them to
the second query which would not DQ them. This would result in the stray
nodes DQ loop ending since we found a number of nodes to DQ less than the
limit.
The fix: add the "WHERE last_contact_success != '0001-01-01
00:00:00+00'::timestamptz" to the selection query.
Change-Id: I4e60de90b68d8745d641b4467c2b23e0e56f7dff
Union query for both reputable and new nodes didn't properly work. The
top level query is required to have an `AS OF SYSTEM TIME` statement as
well.
Change-Id: I8ee6dd5b700c2b1ed2aa562962bfa72be7eec30a
We don't use this column for anything. If you want to know if a node is
contained, you can check the pending_audits table.
Change-Id: I8da1d8e01a2dcaff63c5067a7927b5451424ad04
gracefulexit
With the effort to move audit related data into reputation store, this
PR updates gracefulexit endpoint to use reputation service to get a
node's audit score
Change-Id: Iad93ea689ad67ff9c57c7be16687e21e715fab7a
package in audit
This PR implements reputation store and replace overlay in audit service
to use such store for storing node's audit stats.
In order to keep the changeset smaller, most of the changes in this PR is for copying audit logic in overlay to
reputation package. In a following PR, the duplicating code will be
removed from overlay.
Change-Id: I16c12494a0970f44c422b26cf603c1dc489e5bc1
Define service and DB interface for storing node reputation data
and updating the overlay cache.
Add overlay service and DB method UpdateReputation.
See https://github.com/storj/storj/pull/4144
Change-Id: Iedd8bd3274457d26c595919303d55327c1464b8c
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Improve UpdateCheckIn on a contended row:
name old time/op new time/op delta
UpdateCheckInContended-100x-32 2.29s ±55% 0.17s ±61% -92.45% (p=0.008 n=5+5)
Change-Id: I053ab9f1cff136c306e5fb57f5e355cdc0269a8c
Currently we were duplicating code for AS OF SYSTEM TIME in several
places. This replaces the code with using a method on
dbutil.Implementation.
As a consequence it's more useful to use a shorter name for
implementation - 'impl' should be sufficiently clear in the context.
Similarly, using AsOfSystemInterval and AsOfSystemTime to distinguish
between the two modes is useful and slightly shorter without causing
confusion.
Change-Id: Idefe55528efa758b6176591017b6572a8d443e3d
Currently nodeselection package only contained state for uploads, move
these to a subpackage, such that we can make another "downloadselection"
for downloads. Then move selection logic from overlay to nodeselection.
Change-Id: I0fc42bcae3a29db2728dae9f3863b1e95bf5165b
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
When nodes check in for the very first time, if the satellite can't ping
them back, they are inserted into the nodes table with
last_contact_success of '0001-01-01 00:00:00+00'. If the stray nodes
chore runs before the node can fix their problem, they are DQd.
Solution: when DQing stray nodes, dont DQ where last_contact_success =
'0001-01-01 00:00:00+00'::timestamptz
Change-Id: I477a02d5ef85b2c930ed6b7d99a4d1995169bca8
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
instead of only generating invoices for nodes that had some
activity, we generate it for every node so that we can find
and pay terminal nodes that did not meet thresholds before
we recognized them as terminal.
Change-Id: Ibb3433e1b35f1ddcfbe292c034238c9fa1b66c44
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
Previously we would select a limited number of nodes for DQ in a
CTE and run the update on that set in a single transaction. This
could lead to locking on the table, so instead we select and update
in separate transactions.
Change-Id: I1e802c0845e829eeadcee4fa382f58462515fdb1
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
Testing interfaces is slightly clearer when it's in the package needing
the database rather than each individual implementation.
Change-Id: I10334c214a205f7e510b939b4359a2214c4e060a
Full scope:
private/testplanet,satellite/{overlay,satellitedb}
Description:
In most cases, downtime tracking with audits will eventually lead
to DQ for nodes who are unresponsive. However, if a stray node has no
pieces, it will not be audited and will thus never be disqualified.
This chore will check for nodes who have not successfully been contacted
in some set time and DQ them.
There are some new flags for toggling DQ of stray nodes and the timeframes
for running the chore and how long nodes can go without contact.
Change-Id: Ic9d41fdbf214736798925e728245180fb3c55615
* Deduplicate NodeID list prior to fetching IPs.
* Use NodeSelectionCache for fetching reliable IPs.
* Return number of segements, reliable pieces and all pieces.
Change-Id: I13e679caab275488b4037624b840a4068dad9589
GetSuccessfulNodeNotCheckedInSince and GetOfflineNodesLimited are overlay methods
which were only used by the previous downtime tracking system which has been removed.
These methods should also be removed.
Change-Id: Idb829d742e1f987e095604423fff656fe581183e
Full prefix: satellite/{overlay,nodestats},storagenode/{reputation,nodestats}
Allow the storagenode to receive its audit history data from the
satellite via the satellite's GetStats endpoint.
The storagenode does not save this data for use in the API yet.
Change-Id: I9488f4d7a4ccb4ccf8336b8e4aeb3e5beee54979
* Separate audit history interface into its own file in the overlay
package
* Add overlay.AuditHistory struct so that internalpb.AuditHistory is
only used from within the database layer
* Add overlay.GetAuditHistory function for features that will require
access to detailed audit history information
* Do not return full audit history from UpdateAuditHistory - callers to
that function only need to know the online score and whether a full
tracking period has been completed
* Move audit history tests out of satellite/satellitedb, since they are
independent of database implementation
Change-Id: I35b0c4ac23bbaabd80624f8a9631c3cb1a1f33bd
Nodes which are offline_suspended will no longer be considered for new
uploads. The current threshold that enters a node into offline
suspension is 0.6. Disqualification for offline suspension is still
disabled.
Change-Id: I0da9abf47167dd5bf6bb21e0bc2186e003e38d1a
Query nodes table using AS OF SYSTEM TIME '-10s' (by default) when on CRDB to alleviate contention on the nodes table and minimize CRDB retries. Queries for standard uploads are already cached, and node lookups for graceful exit uploads has retry logic so it isn't necessary for the nodes returned to be current.
We are no longer planning on implementing downtime penalization using
the method described in
docs/blueprints/archive/storage-node-downtime-tracking-deprecated.md.
Now, we are implementing the design described in
docs/blueprints/storage-node-downtime-tracking-with-audits.md.
This change removes the downtime estimation chores from the satellite
core as well as the package satellite/downtime. A future change will
remove the database table.
Change-Id: I1a1d3cf9dceeba36255d25243294865b89925518
With the new overlay.AuditOutcome type for offline audits, the
IsUp field is redundant. If AuditOutcome != AuditOffline, then
the node is online.
In addition to removing the field itself, other changes needed
to be made regarding the relationship between 'uptime' and 'audits'.
Previously, uptime and audit outcome were completely separated. For
example, it was possible to update a node's stats to give it a
successful/failed/unknown audit while simultaneously indicating that
the node was offline by setting IsUp to false. This is no longer possible
under this changeset. Some test which did this have been changed slightly
in order to pass.
Also add new benchmarks for UpdateStats and BatchUpdateStats with different
audit outcomes.
Change-Id: I998892d615850b1f138dc62f9b050f720ea0926b
- Remove flag for switching off offline audit reporting.
- Change the overlay method used from UpdateUptime to BatchUpdateStats, as this
is where the new online scoring is done.
- Add a new overlay.AuditOutcome type: AuditOffline. Since we now use the same
method to record offline audits as success, failure, and unknown, we need to
distinguish offline audits from the rest.
Change-Id: Iadcfe10cf13466fa1a1c2dc542db8994a6423355
Previously if a node did not have audit history data for each of the
windows over the tracking period, we would give them the benefit of
the doubt and set their score to 1. This was to prevent nodes from
being suspended right out the gate. We need a minimum amount of data
to evaluate them.
However, a node who is actually failing at being online will have no
idea until they have received enough audits and we suspend them.
Instead, we will always use their real score, but use a flag to determine
whether they are eligible for suspension/dq.
Change-Id: I382218f12e8770f95d4bcddcf101ef348940cadf
Additionally, this PR changes NewNodeFraction devDefault and testplanet config from 0.05 to 1.
This is because many tests relied on selecting nodes that were reputable based on audit and uptime
counts of 0, in effect, selecting new nodes as reputable ones.
However, since reputation is now indicated by a vetted_at db field that is explicitly set
rather than implied by audit and uptime counts, it would be more complicated to try to
update all of the nodes' reputations before selecting nodes for tests.
Now we just allow all test nodes to be new if needed.
Change-Id: Ib9531be77408662315b948fd029cee925ed2ca1d
Add online score used for the new audit history offline tracking system
to the nodes table. This allows us easy access to the node's online
score for the storagenode dashboard as well as for data analysis.
Change-Id: Ie99be1192e5236862a5b3dbed2e5ef03b9169410
When a node's audit history "online score" passes below a configured
threshold, the node goes into "offline suspension" mode and begins a
review period, where the operator is given an opportunity to bring their
node back online.
After the review period passes, offline suspension is turned off for the
node.
In the future, if a node still has a bad online score at the end of the
review period, it will be disqualified. This is disabled right now.
In the future, if a node is in offline suspension, it will be treated as
"unhealthy". Right now, there are no consequences for being in offline
suspension.
Minor changes:
* Moves AuditHistoryConfig out of UpdateStats/BatchUpdateStats args and
into UpdateRequest.
* Adds "now" argument to UpdateStats/BatchUpdateStats args for easy
testing.
* Changes formatting strings inside buildUpdateStatement to use specific
types.
Change-Id: I032b60298840fc16e6ef831da750f2d57619a397
Add a function to the overlay cache called UpdateAuditHistory, which
allows us to add online or offline audits to a particular node's audit
history, and get that node's "online score" for the configured tracking
period.
The next step will be to use UpdateAuditHistory from inside
BatchUpdateStats/UpdateStats, so that audit history is actually updated
when nodes get audited, and we can suspend nodes based on their online
score.
Change-Id: I2289105e6961e68e829a987ff756b0e576fab120
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.
Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
This change removes the overlay function FindStorageNodesForRepair,
which skips using the node selection cache and hits the database
directly. Otherwise, it is functionally identical to
FindStorageNodesForUpload, which checks the node selection cache first.
When selecting nodes for PUT_REPAIRs, we now call
FindStorageNodesForUpload instead of FindStorageNodesForRepair to reduce
database load.
Change-Id: If34e109695b2ed2b8fb6759115bf769a3459684e
