This field is deprecated in favor of UserAgent; Removing these
references is the final step necessary before dropping the columns from
the database.
https: //github.com/storj/storj/issues/5432
Change-Id: I3a6619170dcf382f82dc8eddb73b6547eaf636f0
New SQL queries for GetProjectObjectsSegments turns out to introduce
full table scan. This is fix for this problem.
Change-Id: Ieac22aafeb780168523a97e27c9283c9ac6a24c8
Query to list (with pages) stripe customers were doing full table scan
because Offset clause was used. This refactoring changed listing to
use cursor instead Offset.
Change-Id: I14688e6c533bc932ba0d209a061562f080b4cf54
We avoid putting more than one piece of a segment on the same /24
network (or /64 for ipv6). However, it is possible for multiple pieces
of the same segment to move to the same network over time. Nodes can
change addresses, or segments could be uploaded with dev settings, etc.
We will call such pieces "clumped", as they are clumped into the same
net, and are much more likely to be lost or preserved together.
This change teaches the repair checker to recognize segments which have
clumped pieces, and put them in the repair queue. It also teaches the
repair worker to repair such segments (treating clumped pieces as
"retrievable but unhealthy"; i.e., they will be replaced on new nodes if
possible).
Refs: https://github.com/storj/storj/issues/5391
Change-Id: Iaa9e339fee8f80f4ad39895438e9f18606338908
add ability to sort api keys on the access management page by ascending
or descending name or creation date. Additionally, edit api keys query
when ordering by name to order by lower(name) so names starting with
capital letters are not treated differently from lower case when
ordering.
Change-Id: I81dbb87587a24fb7097313f76bad116b1f20d306
Add columns package_plan and purchased_package_at to stripe_customers
table and add methods to update and select these values from console
service and payments accounts.
Change-Id: I1e89909055cc3054bfb7baa33c9dca3dfdc7336e
Implementing https://github.com/storj/storj/issues/5702 means adding a
bonus billing transaction for each storjscan transaction being recorded.
To do this idempotently, we need to the ability to for both the
storjscan and bonus transaction to be committed together.
This change updates the billing database to allow multiple billing
transactions to be inserted under the same database transaction.
Change-Id: I941864f47fc64d65aab076eec2e96fd04fcc7aac
FileWalker implements methods to walk over pieces in
in a storage directory.
This is just a refactor to separate filewalker functions
from pieces.Store. This is needed to simplify the work
to create a separate filewalker subprocess and reduce the
number of config flags passed to the subprocess.
You might want to check https://review.dev.storj.io/c/storj/storj/+/9773
Change-Id: I4e9567024e54fc7c0bb21a7c27182ef745839fff
We want to eliminate usages of LoopSegmentEntry.Pieces, because it is
costing a lot of cpu time to look up node IDs with every piece of every
segment we read.
In this change, we are eliminating use of LoopSegmentEntry.Pieces in the
node tally observer (both the ranged loop and segments loop variants).
It is not necessary to have a fully resolved nodeID until it is time to
store totals in the database. We can use NodeAliases as the map key
instead, and resolve NodeIDs just before storing totals.
Refs: https://github.com/storj/storj/issues/5622
Change-Id: Iec12aa393072436d7c22cc5a4ae1b63966cbcc18
This handles cases where a user is warned and triggers payment for their
account. Previously, only a frozen account will trigger this payment,
and will be unfrozen on successful payment. Now, accounts in warning
state trigger payments and are removed from that state on successful payment.
Issue: https://github.com/storj/storj/issues/5691
Change-Id: Icc2107f5d256657d176d8b0dd0a43a470eb01277
Previously, our code produced a Go panic when attempting to index an
empty slice of bucket user agent entries. A length check has been
added to ensure that the slice is not accessed beyond its bounds.
Change-Id: I904ca275b934be1b05393a45d99ff415dcafc926
This change adds onboarding_start, onboarding_end and onboarding_step
columns to the user_settings table. the first two are used to determine
if a user should go through onboarding, the last will be used to as the
step a user got to before exiting onboarding without finishing.
Issue: https://github.com/storj/storj/issues/5660
Change-Id: I8070c880d0d2fc22086f24087c962f57c695cc50
Add a combined index on normalized_email,status to improve performance of
common "get user" query used for the satellite UI.
Change-Id: I24a20d7826e0a68a68c2f95b5847eb819921e7c0
Metainfo needs to know rate and burst limit to be able to limit users
requests. We made cache for per project limiter but to make single
instance we need to know about limits. So far we were doing direct DB
call to get rate/burst limit for project but it's generating lots of
DB requests and can be easily cached as we even have project limit cache.
This change extends project limit cache with rate/burst limit and starts
using this change while creating project limiter instance for metainfo.
Because data size kept in project limit cache is quite small this change
also bumps a bit default capacity of the cache.
Fixes https://github.com/storj/storj/issues/5663
Change-Id: Icb42ec1632bfa0c9f74857b559083dcbd054d071
This might be pretty awful, but at least it is a complete and non-flaky
solution.
**Only when using the rollingupgrade test** (which implies a throwaway
satellite and also a PostgreSQL backend), create a trigger on the nodes
table which forces last_net to be equal to last_ip_port always.
Change-Id: I8448cf131e46576d96a414d06780270c7b2b1892
Remove generate-missing-project-salt migration tool code and related
tests. This migration has already been run and this code is no longer
needed.
Issue https://github.com/storj/storj-private/issues/163
Change-Id: I4e36dcd95a07c5305c597113a7fd08148e100ccc
This test involves a satellite with dev defaults (DistinctIP=no) being
upgraded past commit 2522ff09b6, which
means we need to run the dev-defaults-satellite-upgrade migration SQL
to avoid getting DistinctIP=yes behavior (which breaks the tests).
Change-Id: I29fb596d1ffa568dad635d98cfe9abacd3aaa48f
Up to now, we have been implementing the DistinctIP preference with code
in two places:
1. On check-in, the last_net is determined by taking the /24 or /64
(in ResolveIPAndNetwork()) and we store it with the node record.
2. On node selection, a preference parameter defines whether to return
results that are distinct on last_net.
It can be observed that we have never yet had the need to switch from
DistinctIP to !DistinctIP, or from !DistinctIP to DistinctIP, on the
same satellite, and we will probably never need to do so in an automated
way. It can also be observed that this arrangement makes tests more
complicated, because we often have to arrange for test nodes to have IP
addresses in different /24 networks (a particular pain on macOS).
Those two considerations, plus some pending work on the repair framework
that will make repair take last_net into consideration, motivate this
change.
With this change, in the #2 place, we will _always_ return results that
are distinct on last_net. We implement the DistinctIP preference, then,
by making the #1 place (ResolveIPAndNetwork()) more flexible. When
DistinctIP is enabled, last_net will be calculated as it was before. But
when DistinctIP is _off_, last_net can be the same as address (IP and
port). That will effectively implement !DistinctIP because every
record will have a distinct last_net already.
As a side effect, this flexibility will allow us to change the rules
about last_net construction arbitrarily. We can do tests where last_net
is set to the source IP, or to a /30 prefix, or a /16 prefix, etc., and
be able to exercise the production logic without requiring a virtual
network bridge.
This change should be safe to make without any migration code, because
all known production satellite deployments use DistinctIP, and the
associated last_net values will not change for them. They will only
change for satellites with !DistinctIP, which are mostly test
deployments that can be recreated trivially. For those satellites which
are both permanent and !DistinctIP, node selection will suddenly start
acting as though DistinctIP is enabled, until the operator runs a single
SQL update "UPDATE nodes SET last_net = last_ip_port". That can be done
either before or after deploying software with this change.
I also assert that this will not hurt performance for production
deployments. It's true that adding the distinct requirement to node
selection makes things a little slower, but the distinct requirement is
already present for all production deployments, and they will see no
change.
Refs: https://github.com/storj/storj/issues/5391
Change-Id: I0e7e92498c3da768df5b4d5fb213dcd2d4862924
We changed primary key for bucket_bandwidth_rollups table. Now we
need to do some cleanup in places like structs, sorting methods or SQL
queries.
Change-Id: Ida4f874f161356df193379a53507602e04db1668
In the past we set incorrect primary key for bucket_bandwidth_rollups
table and bucket name was first column of key instead of project id.
This change fixes this problem.
We will alter primary key manually for production satellites. That's
why migration code is checking if change was already applied.
https://github.com/storj/storj/issues/5332
Change-Id: I7dd555eb0c2f6fda1c90eaed08fa847b7f273bc7
Add passphrase_prompt column to user_settings table to store a boolean
whether a user would like to be prompted to enter a passphrase when
entering a new project.
Issue https://github.com/storj/storj/issues/5613
Change-Id: I5d086df277aff458453343c7c38a379e7b1b8bf9
This change adds a new chore that will check for failed invoices and
potentially freeze corresponding accounts.
It makes slight modifications to stripemock.go and invoices.go (adding
stripe CustomerID to the Invoice struct).
Issue: https://github.com/storj/storj-private/issues/140
Change-Id: I161f4037881222003bd231559c75f43360509894
Commit fb59974 disabled usage price overrides because of a failing
test. This change reenables it while resolving the issue that caused
the test to fail.
The previous version of the test passed Gerrit verification and was
merged, but it failed for the primary Jenkins pipeline after merge.
This is due to a difference in how the Jenkins build runs Cockroach
and Postgres for each pipeline.
This commit rewrites the test to be safe for concurrent execution by
ensuring any mutable variables are defined within each test so that
shared state across tests is reduced.
Change-Id: Ia4566c9cd2d698afdb2caa4b7e2808b17e18de4e
Also, fix nodevents iota usage. Type is directly used in the database
hence we should avoid iota, because it's easy to mess-up the constant
values.
Change-Id: I32bf6d0502fbf3d18660dab5b1dd0b5627b444df
Project usage price overriding has been removed because it produces
incorrect results when tested. It should not be re-implemented until
the issues it causes are resolved.
Change-Id: Ic92eff374c9af4fea3bf32782a72303a7978b055
We are supposed to wait for some amount of time after a timed-out audit
before retrying the audit on the contained node. We are also supposed to
wait for some amount of time before subsequent retries, if they are
necessary. The test added here tries to assure that those delays happen,
as far as it is possible to assure that a delay will happen in computer
code.
The previous behavior of the system was, in fact, to carry out
Reverifies as soon as a worker could retrieve the job from the
reverification queue. That's not a very major problem, as subsequent
retries do have a delay and the node does get several retries. Still, it
was not ideal, and this test exposed that mismatch with expectations, so
this commit includes a minor change to effect that pause between verify
and the first reverify.
Refs: https://github.com/storj/storj/issues/5499
Change-Id: I83bb79c166a458ba59a2db2d17c85eca43ca90f0
This change adds a database migration for a new table that stores
configurations for a user, the first of which is the session duration.
Database methods are implemented to interact with this table.
Resolves#5472
Change-Id: I01049265f385ea5de65907da1bc3bcf426d3c577
Previously we were exposing the testing facilities via interface casting
the necessary parts, however, when things are not part of the main
satellite.DB interface they need to be manually propagated. Rather than
relying on using hidden methods lets expose things as long as they don't
create a direct dependency to the database driver.
Change-Id: I2eb7d8b60f4b64de1320c2d32581f7be267c0f57
