Added new projectaccounting query to get project's single bucket usage rollup.
Added new service method to call new query.
Added implementation for IsAuthenticated method which is used by new generated API.
Change-Id: I7cde5656d489953b6c7d109f236362eb465fa64a
Finished implementing queries for both bandwidth and storage using pgx.Batch.
Fixed CSP styling issue.
Change-Id: I5f9e10abe8096be3115b4e1f6ed3b13f1e7232df
Existing tests are checking errors by comparing error message.
We plan to expose storage/segment limit errors as a public uplink
API but before that will happen we need to update tests to handle
both cases as new uplink error will have a bit different error message
than current tested error.
https://github.com/storj/uplink/issues/77
Change-Id: Id2706323c60d050d96752e66e859d4ec051a69b9
Implemented endpoint and query to get bandwidth chart data for new project dashboard.
Connected backend with frontend.
Storage chart data is mocked right now.
Change-Id: Ib24d28614dc74bcc31b81ee3b8aa68b9898fa87b
For better performance we should use AOST for getting
data where being up to data it not very crucial. We don't
care about small differences for segment limit calculation.
Change-Id: I9b2d4f2bd15ebc9d1c46bc84dd51a2e9d9231506
Additional test case to cover situation when cache value
expired and we need to get this value directly from DB.
Change-Id: I07bda67e19333e09a567104ce70f112fd47a7845
We had two problems here. First was how we were handling
errors message from GetProjectSegmentUsage. We were always
returning error, even for ErrKeyNotFound which should be used
to refresh value in cache and not propagated out of method.
Second, we were using wrong value to update cache. We used
current value from cache which obviously it's not what we intend.
Fixes https://github.com/storj/storj/issues/4389
Change-Id: I4d7ca7a1a0a119587db6a5041b44319102ef64f8
We need to combine methods from accounting.Service (ExceedsStorageUsage and ExceedsSegmentUsage)
to run checks concurrently.
Resolves https://github.com/storj/team-metainfo/issues/73
Change-Id: I47831bca92457f16cfda789da89dbd460738ac97
We want to be able to limit the number of segments per project for users.
To limit this we need to check limit value associated with project
and value of used segments already in BeginMoveObject, BeginMoveSegment
and increment cache segments usage after each CommitSegment call.
Resolves https://github.com/storj/team-metainfo/issues/1
Change-Id: I6290e67c095a174b9d101c4521802d9bfe0453b8
Batching of the order submissions can lead to combining the allocated
traffic totals for two completely different time windows, resulting
in incorrect customer accounting. This change will group the batched
order submissions by projectID as well as time window, leading to
distinct updates of a buckets bandwidth rollup based on the hour
window in which the order was created.
Change-Id: Ifb4d67923eec8a533b9758379914f17ff7abea32
We want to set maximum number of segments per project. This change will
add functionality to get number of segments currently used by project.
To avoid often DB calls segment cound will be cached and refreshed every
few minutes.
Change-Id: I2ecb6484f5afc3875c0e0dfaea360e8872f9d196
Exposes functionality to get and update project segment
limit. It will be used to limit number of segments per project
while uploading object.
Change-Id: I971d48eebb4e7db8b01535c3091829e73437f48d
Added new query to get project object and segment count.
Added appropriate object and segment count view for new project dashboard.
Change-Id: I69a2e55442f318c51dc365c0c578b964f2f06c7f
Even though we want to start charging segment fee instead of object fee,
it's hard for users to understand what a segment is. This PR adds the
object count back in the UI alongside with segment count to help address
the issue.
Change-Id: I92eb42c769d350eba68a72443deffec5c278359c
Populate the egress_dead column for taking into account allocated bandwidth that can be removed because orders have been sent by the storage nodes. The bandwidth not used in these orders can be allocated again.
Change-Id: I78c333a03945cd7330aec052edd3562ec671118e
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
Bucket tally calculation will be removed from metaloop and will
use metabase objects iterator directly.
At the moment only bucket tally needs objects so it make no sense
to implement separate objects loop.
Change-Id: Iee60059fc8b9a1bf64d01cafe9659b69b0e27eb1
Current tally is calculating storage both for buckets and
storage nodes. This change is moving nodes storage
calculation to separate service that will be using
segment loop.
Change-Id: I9e68bfa0bc751c82ff738c71ca58d311f257bd8d
When a user adds a credit card, switch them to the paid tier and update
their projects with new bandwidth/storage limits. New projects for the
paid tier user will also have the updated limits.
The new limits are:
* storage per project - 50 GB free/25 TB paid
* bandwidth per project - 50 GB free/100 TB paid
Change-Id: I7d6467d077e8bb2bbe4bcf88ab8d75490f83165e
We want to calculate bucket tally only from iterating objects.
Object currently has an info about totals for bytes and segments.
We need to adjust tallies to keep those totals. Older entries will
be untouched and code will use totals only if available. Change
is adding columns for totals to bucket_storage_tally table and
is adding general handling for them.
Next step is to start using total columns instead of inline/remote.
This will be done with next change.
Change-Id: I37fed1b327789efcf1d0570318aee3045db17fad
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
Adding AS OF SYSTEM TIME to query that is calculating project bandiwdth.
As an addition method for setting interval is added as test doesn't
work well with default interval.
Change-Id: Id1e15be4f6afff13b9dc2b7f595e2edb6de28db9
The redis key associated to bandwidth usage depended on the current month.
This change makes it depends also on the day, so that we update bandwidth usage
daily to take into account changes associated to expired but not used allocated bandwidth.
It also add a test to to check that the allocated but not settled bandwidth is not counted after 2 days.
Change-Id: Iee9dbe3517cc3b9825438360b276a07a43dfbc64
Satellites set their configuration values to default values using
cfgstruct, however, it turns out our tests don't test these values
at all! Instead, they have a completely separate definition system
that is easy to forget about.
As is to be expected, these values have drifted, and it appears
in a few cases test planet is testing unreasonable values that we
won't see in production, or perhaps worse, features enabled in
production were missed and weren't enabled in testplanet.
This change makes it so all values are configured the same,
systematic way, so it's easy to see when test values are different
than dev values or release values, and it's less hard to forget
to enable features in testplanet.
In terms of reviewing, this change should be actually fairly
easy to review, considering private/testplanet/satellite.go keeps
the current config system and the new one and confirms that they
result in identical configurations, so you can be certain that
nothing was missed and the config is all correct.
You can also check the config lock to see what actual config
values changed.
Change-Id: I6715d0794887f577e21742afcf56fd2b9d12170e
Replace GetProjectAllocatedBandwidth by GetProjectBandwidth which calculates
used bandwidth from allocated and settled bandwidth recorded in the
project_bandwidth_daily_rollups table.
For each day in the month, if the allocated bandwidth is expired, it uses the
settled bandwidth for computing used bandwidth.
Change-Id: Ife723c6d5275338f470619631acb25930d39ac3c
project_bandwidth_daily_rollups table
We want to calculate used bandwidth better so we need to calculate it
from allocated and settled bandwidth. To do this we need first populate
this new table.
https://storjlabs.atlassian.net/browse/PG-56
Change-Id: I308b737bf08ee48ce4e46a3605697ab2095f7257
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
Currently the loop handling is heavily related to the metabase rather
than metainfo.
metainfo over time has become related to the "public API" for accessing
the metabase data.
Currently updates monkit.lock, because monkit monitoring does not handle
ScopeNamed correctly. Needs a followup change to monitoring check.
Change-Id: Ie50519991d718dfb872ec9a0176a82e732c97584
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
Check that the bloom filter creation date is earlier than the
metainfo loop system time used for db scanning.
Change-Id: Ib0f47c124f5651deae0fd7e7996abcdcaac98fb4
Rename the functions that are prefixed with 'New' which connect with
Redis by 'Open' to make clear that they perform network operations.
Change-Id: I1351e89a642e8e2c2586626646315ad0fb2c6242
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
