this change tries really hard to never have all of the storage node
rollups in memory at the same time, up until the rollups are actually
getting summed together.
Change-Id: If67f49e7d71106798d996a6850b3e48671bd9e18
Previously uplink register only accepted a fully serialized access grant.
This is kind of annoying, I changed it so that it could also use access names.
Change-Id: If6d4d1baa8d4fb3d87fdedb895d459fa12743f1a
Firstly, this changes the repair functionality to return Canceled errors
when a repair is canceled during the Get phase. Previously, because we
do not track individual errors per piece, this would just show up as a
failure to download enough pieces to repair the segment, which would
cause the segment to be added to the IrreparableDB, which is entirely
unhelpful.
Then, ignore Canceled errors in the return value of the repair worker.
Apparently, when the worker returns an error, that makes Cobra exit the
program with a nonzero exit code, which causes some piece of our
deployment automation to freak out and page people. And when we ask the
repair worker to shut down, "canceled" errors are what we _expect_, not
an error case.
Change-Id: Ia3eb1c60a8d6ec5d09e7cef55dea523be28e8435
For coordinating with other processes it can be useful to wait until
another process is accepting requests on an address.
Change-Id: Id623ed815149f14f9f0344e2f396ab70fc4dec6a
Previously, we created a new file to use for directory verification
every time the storage node starts. This is not helpful if the storage node
points to the wrong directory when restarting. Now we will only create the file
on setup. Now the file should be created only once and will be verified at
runtime.
Change-Id: Id529f681469138d368e5ea3c63159befe62b1a5b
Previously, we ran setup if no config file was found in the expected dir.
However, there may be situations where a previously set up node's files
may be unreachable. In this case, we would prefer to exit with an error
rather than assume this node needs to be initialized.
The solution here is to add a new env variable to call the setup command.
If SETUP == true, the node will setup, but not run. If SETUP != true,
the node will run and not setup.
If a previously set up node runs with SETUP, it will return an error.
If a node runs without an initial SETUP, it will return an error.
Change-Id: Id2c796ec3d43f2add5e5f34fb777a563eae59f2f
This change forward-proofs the satellite selection on uplink setup.
Currently we have hard-coded response values, so if we add satellites in
the future we have to remember to update the switch statement below. In
this change it should work for any number of future satellites.
Change-Id: I3250fe2154dbeb4820efadf49780b20c4b7a3408
This PR fixes below issues:
1. remove concurrent installation for various versions
We were doing this to decrease the amount of execution time the versions test.
However, it's returning incorrect exit code when there's an
installation failure.
Right now, we are only installing two versions of `storj-sim` and
the rest are only doing uplink cli installation. The performance of
this test should be hugely impacted by the setup step now.
2. only remove release settings instead of deleting the entire file
uplink CLI is referrencing `private/version` package. Therefore, we
cannot delete it
3. add back `GATEWAY_0_API_KEY` in storj-sim
In order to set up older version of uplink cli, we need access to
the gate way api key.
Change-Id: Ia3c37c197bd007b6e1f7c2bd71adde42181d46f0
As part of the Metainfo Refactoring, we need to make the Metainfo Loop
working with both the current PointerDB and the new Metabase. Thus, the
Metainfo Loop should pass to the Observer interface more specific Object
and Segment types instead of pb.Pointer.
After this change, there are still a couple of use cases that require
access to the pb.Pointer (hence we have it as a field in the
metainfo.Segment type):
1. Expired Deletion Service
2. Repair Service
It would require additional refactoring in these two services before we
are able to clean this.
Change-Id: Ib3eb6b7507ed89d5ba745ffbb6b37524ef10ed9f
Check binary version on self-update instead of current process
version to prevent updating already updated binary.
Add info logs to report current version of service beeing
updated.
Change-Id: Id22dee188a99d6d45db925104786f49f5d3a61ae
This makes it possible to remove of this obsolete flag from the
multi-tenant gateway.
As a consequence, displaying the GATEWAY_0_ACCESS env var will always
require a running storj-sim. Until now, it was required only the first
time. Then the value was stored in the 'access' config. But this is now
not possible anymore.
The changes in StripeMock are required to fix failures in integration
tests. StripeMock is in-memory and its data does not survive restarts of
storj-sim. The second and following starts of storj-sim had invalid
state of StripeMock, which failed requests that were required to
populate the GATEWAY_0_ACCESS env var. The changes in StripeMock makes
it repopulate the Stripe customers from the database.
Change-Id: I981a208172b76577f12ecdaae485f5ae4ea269bc
log.Fatal immediately terminates the program without running any defers.
We should properly close all the services and databases.
Change-Id: I5e959cef3eafedeacb3a2062e3da47e8d04e8e75
Sadly the build process with this command is very, very flaky and often fails pulling down curl via apk.
As we currently do not need it anyway, it is safe to remove.
Change-Id: I8a396c560d61a7fe6324560152a68c07c6b31638
The VerifyPieceHashes method has a sanity check for the number pieces to
be removed from the pointer after the audit for verifying the piece
hashes.
This sanity check failed when we executed the command on the production
satellites because the Verify command removes Fails and PendingAudits
nodes from the audit report if piece_hashes_verified = false.
A new temporary UsedToVerifyPieceHashes flag is added to
audits.Verifier. It is set to true only by the verify-piece-hashes
command. If the flag is true then the Verify method will always include
Fails and PendingAudits nodes in the report.
Test case is added to cover this use case.
Change-Id: I2c7cb6b12029d52b2fc565365eee0826c3de6ee8
Remove usage of --non-interactive flag. It is not provided (and
necessary) by the multitenant S3 gateway anymore.
ACCESS_KEY and SECRET_KEY env vars are not provided anymore as they are
not generated by the multitenant S3 gateway.
Change-Id: I3ecfb92110e31ae13977de3899dad273daae6c1e
Jira: https://storjlabs.atlassian.net/browse/PG-69
There are a number of segments with piece_hashes_verified = false in
their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. Most probably, this happened due to a bug we had in the
past. We want to verify them before executing the main migration to
metabase. This would simplify the main migration to metabase with one
less issue to think about.
Change-Id: I8831af1a254c560d45bb87d7104e49abd8242236
Jira: https://storjlabs.atlassian.net/browse/PG-67
There are a number of old-style objects (without the number of segments
in their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. We want to migrate their metadata to contain the number of
segments before executing the main migration to metabase. This would
simplify the main migration to metabase with one less issue to think
about.
Change-Id: I42497ae0375b5eb972aab08c700048b9a93bb18f
Fix case where line is larger than maxline and writer ended up in an
infinite loop trying to buffer more data.
Change-Id: I243da738b331279d6bf27255778b5798e7f37f95
This PR updates `uplink rb --force` command to use the new libuplink API
`DeleteBucketWithObjects`.
It also updates `DeleteBucket` endpoint to return a specific error
message when a given bucket has concurrent writes while being deleted.
Change-Id: Ic9593d55b0c27b26cd8966dd1bc8cd1e02a6666e
