We are moving an error into rejectErr since its preventing storage nodes from being able to settle other orders.
Change-Id: I3ac97c340e491b127f5e0024c5e8bd9f4df8d5c3
The same was that our Admin API handles project and account deletions currently, we would like
to have the same checks on the user-facing API. This PR adds the same checks to the console service.
General more applicable checks have been moved directly into the payments service.
In addition it adds the BucketsDB to the console DB, to have easier access and avoiding import cycles with
the metainfo package.
A small cleanup around our unnecessary monkit imports made it in as well.
Change-Id: I8769b01c2271c1687fbd2269a738a41764216e51
holding it during node i/o means slow nodes can hold up order
processing for everyone else. this dramatically increases
the amount of tiem spent handling orders.
Change-Id: Iec999b7ed0817c921a0fd039097a75bdd3c70ea2
Doing it at the ProcessOrders level was insufficient: the endpoints
make multiple database calls. It was a misguided attempt to only
have one spot enter the semaphore. By putting it in the endpoint
we can not only be sure that the concurrency is correctly limited
but it can be configurable easily.
Change-Id: I937149dd077adf9eb87fce52a1a17dc0afe96f64
nodes are submitting using both the legacy and windowed endpoints
and thus having their legacy submissions rejected.
it is legal to use both the legacy and windowed endpoints
in phase1 since they use the same backend. the legacy endpoint
is disabled in phase2 and phase3.
therefore, if we wait an order expiration period (2 days) after
we determine enough nodes have started using the windowed
endpoint, we can be sure that any orders they did have to
submit with the legacy endpoint will have expired.
Change-Id: I4418a881bf8bb9377efaef4c651e6103a5dc6ed0
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.
In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).
In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.
In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.
The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.
Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.
Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
Why: We need a way to cut down on database traffic due to bandwidth
measurement and tracking.
What: This changeset is the Satellite side of settling orders in 1 hr windows.
See design doc for more details: https://review.dev.storj.io/c/storj/storj/+/1732
Change-Id: I2e1c151e2e65516ebe1b7f47b7c5f83a3a220b31
there are a subset of storagenodes hammering the satellite with
expired orders. if we check for expiration first, we don't have
to do a bunch of pointless signature verification. since a && b
is equal to b && a, we can order these checks in any way we want
and have it still be correct.
Change-Id: I6ffc8025c8b0d54949a1daf5f5ea1fed9e213372
we still need to come up with a better plan to get storage nodes
to stop doing this, but in the meantime, we know this is happening,
just stop logging it and keep some stats instead.
Change-Id: Icb6bcba275e0e955c54b1a90da2b37219fff2349
by doing an indexed anti-join we're able to reduce the time to
select the pending orders by over 10x on postgres. this should
help us process pending orders much more quickly.
it probably won't do as good a job on cockroach because it does
not do an indexed anti-join and instead does a hash join after
scanning the entire consumed serials table. we should either
remove orders entirely or try to make that more efficient
when necessary.
Change-Id: I8ca0535acd21c51e74955b24c9b86d20e4f2ff9c
common/pb moved grpc to a separate package common/pb/pbgrpc.
This updates this repository to use it.
Change-Id: I2de2a190688871cf9cb61f7ea511f8a01e264e4e
This change adds two new tables to process orders as fast as we used
to but in an asynchronous manner and with hopefully less storage
usage. This should help scale on cockroach, but limits us to one
worker. It lays the groundwork for the order processing pipeline to
be queue rather than database driven.
For more details, see the added fast billing changes blueprint.
It also fixes the orders db so that all the timestamps that are
passed to columns that do not contain a time zone are converted to
UTC at the last possible opportunity, making it less likely to use
the APIs incorrectly. We really should migrate to include timezones
on all of our timestamp columns.
Change-Id: Ibfda8e7a3d5972b7798fb61b31ff56419c64ea35
Enhance the documentation of the UseSerialNumber method (interface and
implementation) and add several missing dots in doc comments of the
methods of the same interface and implementation.
Change-Id: I792cd344f0d2542e060fa2ec288b71231cae69de
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
warning: databases migrated to version 77 before this commit
is merged must be manually re-migrated. this should not be a
problem for anything but staging databases.
Change-Id: Ie1631c48379472352014183ee43f1465e22200f7
this commit introduces the reported_serials table. its purpose is
to allow for blind writes into it as nodes report in so that we have
minimal contention. in order to continue to accurately account for
used bandwidth, though, we cannot immediately add the settled amount.
if we did, we would have to give up on blind writes.
the table's primary key is structured precisely so that we can quickly
find expired orders and so that we maximally benefit from rocksdb
path prefix compression. we do this by rounding the expires at time
forward to the next day, effectively giving us storagenode petnames
for free. and since there's no secondary index or foreign key
constraints, this design should use significantly less space than
the current used_serials table while also reducing contention.
after inserting the orders into the table, we have a chore that
periodically consumes all of the expired orders in it and inserts
them into the existing rollups tables. this is as if we changed
the nodes to report as the order expired rather than as soon as
possible, so the belief in correctness of the refactor is higher.
since we are able to process large batches of orders (typically
a day's worth), we can use the code to maximally batch inserts into
the rollup tables to make inserts as friendly as possible to
cockroach.
Change-Id: I25d609ca2679b8331979184f16c6d46d4f74c1a6
the hope is that it is mostly interfering with itself, so this
will make it not do that (well, N api servers, but hopefully
that's not enough to cause it to have issues).
Change-Id: Ifd0c9e6617457785ab25fe5b714d8556cdc8e2d3
When an uplink requests an upload or download from the satellite we are trackig the
allocated bandwidth twice. The value in bucket_bandwidth_rollups is used
for project limits but the value in storagenode_bandwidth_rollups is not
used at all. We can increase the performance by removing it. Uplinks
will get a faster response from the satellite.
Change-Id: Icccd41f94107ef34668f30f99bf5f728c384b07e
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
Creates a new chore, dbcleanup, which can be used for routine deletion of items from the satellite database and adds functionality for deletion of expired serial numbers
* pkg/process: Fatal show complete error information
Change the general process execution function to not using the sugared
logger for outputting the full error information.
Delete some unreachable code because Zap logger Fatal method calls exit
1 internally.
* storagenode/storagenodedb: Add info to error
Add more information to an error returned due to some data
inconsistency.
* storagenode/orders: Don't use sugared logger
Don't use sugar logger and provide better contextualized error messages
in settle method.
* storagenode/orders: Add some log fields to error msgs
Add some relevant log fields to some logged errors of the sender settle
method.
* satellite/orders: Remove always nil error from debug
Remove an error which as logged in debug level which was always nil and
makes the logic that used this variable clear.
* storagenode/orders: Don't return error Archiving unsent
Don't stop the process which archive unsent orders if some of them
aren't found the DB because it cause the Storage Node to stop with a
fatal error.
* satellitedb/certDB: refactors of the node certificate storage DB table
The existing implementation doesnt allow to store the complete certificate chain of uplinkIDs or storagenodeIDs, so the current table is dropped and new table will be added which addresses the storage and retrieval of certificates
pkg/identity: fixes spelling mistakes that I missed on PR#2754
Fixes V3-1992/V3-2388
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
* fix orderdDB methods to take correct args
* update tally to save projectID in correct format
* update var names in splitBucket test
* changes per CR comments
