The code responsible for generating TypeScript classes has been
separated from the rest of the TypeScript generation code so that other
packages may take advantage of this functionality.
References #5494
Change-Id: I97eabd430bd6a5f748eafaf8b1d783977e75e660
Only API peer needs access to order DB (and rollups cache) because it's
only place where we are creating orders for PUT and GET operations. For
other peers like auditor and repairer we can set noop implementation to
reduce number of dependencies needed for them.
Change-Id: Ic32d1879f0b97ffc4516f401898e31e95ae892e4
Up to now, we have been implementing the DistinctIP preference with code
in two places:
1. On check-in, the last_net is determined by taking the /24 or /64
(in ResolveIPAndNetwork()) and we store it with the node record.
2. On node selection, a preference parameter defines whether to return
results that are distinct on last_net.
It can be observed that we have never yet had the need to switch from
DistinctIP to !DistinctIP, or from !DistinctIP to DistinctIP, on the
same satellite, and we will probably never need to do so in an automated
way. It can also be observed that this arrangement makes tests more
complicated, because we often have to arrange for test nodes to have IP
addresses in different /24 networks (a particular pain on macOS).
Those two considerations, plus some pending work on the repair framework
that will make repair take last_net into consideration, motivate this
change.
With this change, in the #2 place, we will _always_ return results that
are distinct on last_net. We implement the DistinctIP preference, then,
by making the #1 place (ResolveIPAndNetwork()) more flexible. When
DistinctIP is enabled, last_net will be calculated as it was before. But
when DistinctIP is _off_, last_net can be the same as address (IP and
port). That will effectively implement !DistinctIP because every
record will have a distinct last_net already.
As a side effect, this flexibility will allow us to change the rules
about last_net construction arbitrarily. We can do tests where last_net
is set to the source IP, or to a /30 prefix, or a /16 prefix, etc., and
be able to exercise the production logic without requiring a virtual
network bridge.
This change should be safe to make without any migration code, because
all known production satellite deployments use DistinctIP, and the
associated last_net values will not change for them. They will only
change for satellites with !DistinctIP, which are mostly test
deployments that can be recreated trivially. For those satellites which
are both permanent and !DistinctIP, node selection will suddenly start
acting as though DistinctIP is enabled, until the operator runs a single
SQL update "UPDATE nodes SET last_net = last_ip_port". That can be done
either before or after deploying software with this change.
I also assert that this will not hurt performance for production
deployments. It's true that adding the distinct requirement to node
selection makes things a little slower, but the distinct requirement is
already present for all production deployments, and they will see no
change.
Refs: https://github.com/storj/storj/issues/5391
Change-Id: I0e7e92498c3da768df5b4d5fb213dcd2d4862924
The tests were using global variables for keeping the mock state, which
was indexed by the satellite ID. However, the satellite ID-s are
deterministic and it's possible for two tests end up using the same
mocks.
Instead make the mock creation not depend on the satellite ID and
instead require it being configured via paymentsconfig.
This fixes TestAutoFreezeChore failure.
Change-Id: I531d3550a934fbb36cff2973be96fd43b7edc44a
Peer for generating bloom filters will be able to use ranged loop.
As an addition some cleanup were made:
* remove unused parts of GC BF peer (identity, version control)
* added missing Close method for ranged loop service
* some additional tests added
https://github.com/storj/storj/issues/5545
Change-Id: I9a3d85f5fffd2ebc7f2bf7ed024220117ab2be29
This commit introduces tests that perform multiple concurrent audits
against the same storage node, to make sure that doing so does not
create incorrect outcomes.
Refs: https://github.com/storj/storj/issues/5495
Change-Id: Iaae49e042306bfa59bdf04c1a1540667488e51e5
this change uses the new storj/common noise helpers, which:
* add a security fix (require an expected node id for validating
noise key attestations)
* stops doing an unnecessary order signature validation (it's
already been done inside of PutPiece)
* removes some duplicate code
Change-Id: I5e67a08ff216cd9c5b0b82e40b4d9de664b6b0fc
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds the actual chore.
Refs: https://github.com/storj/storj/issues/5431
Change-Id: Id78b40bf69fae1ac39010e3b553315db8a1472bd
Previously we were exposing the testing facilities via interface casting
the necessary parts, however, when things are not part of the main
satellite.DB interface they need to be manually propagated. Rather than
relying on using hidden methods lets expose things as long as they don't
create a direct dependency to the database driver.
Change-Id: I2eb7d8b60f4b64de1320c2d32581f7be267c0f57
Testplanet tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because
currently we have multiple queries which are doing full table scan and it's not trivial to change.
https://github.com/storj/storj/issues/5471
Change-Id: Ia2fcbfb9102424d58f95e00071329454a8c1066e
Satellite DB tests will print into logs (WARN) if full table scan will
be detected. Test won't be failed automatically. That's because currently
we have multiple queries which are doing full table scan and it's not
trivial to change.
We may change that behavior when we will figure out how to skip
specific query from detection or we will fix all problematic queries.
https://github.com/storj/storj/issues/5471
Change-Id: Icafe782257a0d353e8bcdf6fa8a19c20b1091a0b
The previous test relied on timing, but instead let's try dialing
the server and see whether we can do something with the connection.
We probably should test all the supported protocols instead of just tcp.
Change-Id: I9217494859faea0a7b93515aad706da4fdd8a140
Our DB support in storj/private was updated to enable basic context
support for executing SQL queries. This change requires some small
adjustments as not all parts were working correctly.
storj/private commit with change:
4bc77107b7acfcc2f7ad65796d5dd3d7c64801e4
Change-Id: I64d7ed92788ea0920d12cecd1aa0e414720e9b9c
Move the IsAuthenticated check until after initial parameter
parsing/validation. IsAuthenticated will be more expensive than
parsing/validation, so we should fail before auth if possible.
Change-Id: I96a020892eabcb750e8ec9ecc1d8b7d9bf8bf573
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
This change stubs userinfo endpoint from storj/common/pb/userinfo.proto.
It also adds config for allowed peers, and a method for verifying peers.
Issue: https://github.com/storj/storj/issues/5358
Change-Id: I057a0e873a9e9b3b9ad0bba69305f0d708bd9b9e
Adds new method Exists which can be used to verify which
requested piece ids exists on storage node. Will verify only pieces
which belongs to the satellite that used that endpoint.
Minum WASM size was increased a bit.
https://github.com/storj/storj/issues/5415
Change-Id: Ia5f9cadeb526541b2776a8973eb7d50133ad8636
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
Now that we are doing scalable piecewise reverifications, the code for
handling the old way of doing things (containment, pending audits,
reporting, testing) can now be removed.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ief1a75f423eff682e8f3d57804e343b3409a6631
Here we add a worker class comparable to audit.Worker, which will be
responsible for pulling items off of the reverification queue and
calling reverifier.ReverifyPiece on them.
Note that piecewise reverification audits (which this will control) are
not yet being done. That is, nothing is being added to the
reverification queue at this point.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I94e28830e27caa49f2c8bd4a2336533e187ab69c
The query changes we did while fixing the usage graph led to wrong
payout calculations directly linked to disk space.
This change:
- avoids converting from Bh to B directly in the query
- returns the at_rest_total in the original bytes*hour value
- returns at_rest_total_bytes as the calculated disk spaced used in bytes
- uses the at_rest_total_bytes only for the disk space graph
- return summary_bytes as the average disk space used within the specified date
- updates the disk space graph header to "average disk space used this month"
The total disk used in the month is also displayed in B not B*day
Resolves https://github.com/storj/storj/issues/5355
Change-Id: I2cfefb0fe711f9c59de2adb547c4ab50b05c7cbb
NewContainment will replace Containment later in this commit chain, but
for now it is not yet being used.
NewContainment will allow a node to be contained for multiple pending
reverify jobs at a time. It is implemented by way of the reverify queue.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I126eda0b3dfc4710a88fe4a5f41780618ec19101
at_rest_total_bytes and summary_bytes are storage usages return as bytes
instead of bytes*hour. This is used for the disk space graph.
Updates https://github.com/storj/storj/issues/5355
Change-Id: I81f77fe9b9069cf3b29ab681586e506363e5b066
Adding a new worker comparable to Verifier, called Reverifier; as the
name suggests, it will be used for reverifications, whereas Verifier
will be used for verifications.
This allows distinct logging from the two classes, plus we can add some
configuration that is specific to the Reverifier.
There is a slight modification to GetNextJob that goes along with this.
This should have no impact on operational concerns.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: Ie60d2d833bc5db8660bb463dd93c764bb40fc49c
This change turns off fsync on the postgres container used for tests. This
reduces migration time significantly when initializing new satellite
databases.
The change also includes a new benchmark for satellite initialization in
testplanet.
$ benchstat old.txt new.txt name old time/op new time/op delta
Run_Satellite/Postgres-16 1.36s ± 0% 0.08s ± 0% ~ (p=1.000 n=1+1)
Change-Id: Ic954767133864770cf652b0dfdcd6b109a167b5f
Running all of the migrations necessary to initialize a storage node
database takes a significant amount of time during runs.
The package current supports initializing a database from manually coalesced
migration data (i.e. snapshot) which improves the situation somewhat.
This change takes things a bit further by changing the snapshot code to
instead hydrate the database directory from a pre-generated snapshot zip
file.
name old time/op new time/op delta
Run_StorageNodeCount_4/Postgres-16 2.50s ± 0% 0.16s ± 0% ~ (p=1.000 n=1+1)
Change-Id: I213bbba5f9199497fbe8ce889b627e853f8b29a0
This change causes rate limiting errors to be returned to the client
as JSON objects rather than plain text to prevent the satellite UI from
encountering issues when trying to parse them.
Resolvesstorj/customer-issues#88
Change-Id: I11abd19068927a22f1c28d18fc99e7dad8461834
As part of the effort of splitting out the auditor workers to their own
process, we are transitioning the communication between the auditor
chore and the verification workers to a queue implemented in the
database, rather than the sequence of in-memory queues we used to use.
This logical database is safely partitionable from the rest of
satelliteDB.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I6cd31ac5265423271fbafe6127a86172c5cb53dc
Add a new chore to periodically insert nodes who are offline and
have not gotten an offline email in a certain amount of time into node
events
Change-Id: I658b385bb777b0240c98092946a93d65bee94abc
Create NodeEvents Chore on satellite core to read nodeevents DB and
notify node operators on node events. The chore sends notifications
grouped by email and event type: it selects the oldest entry in
nodeevents.DB and also any other event with the same email and event
type no matter how old it is. The oldest entry of a group must exist for
a minimum amount of time before that group can be selected, however.
This minimum amount of time is a configurable value:
--node-events.selection-wait-period. This wait period allows us to
combine events of the same time and same email address into a singular
email.
Change-Id: I8b444aa324d2dae265cc27d9e9e85faef79195d8
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
Full file sync before saving files to piecestore seems to be very expensive.
Bwfore we do any step to eliminate them we are planning to do more measurement which requires a temporary flag to turn it off. (not for production).
Change-Id: I5cb8f8cb348ca3590fb5eae14d02edb3f0424617
Currently, its not strightforward how to benchmark with testplanet.
This change add Bench method to make it easy.
Change-Id: I212dfe71a18bb6ddd7a127e5b6d313b1b0c1f824
We will introduce new logic for creating new objects (BeginObject).
Instead of using single version internally (1) we will be selecting first
available version during object creation. Because we need to be sure
that everything is wired up correctly we need a feature flag to be
able to control if new feature is enabled.
Change-Id: If0f8496397130811f43bf9db9fdcc2b30cd2e4ca
Implement a new service to read retain filter from a bucket and
send them out to storagenodes.
This allows the retain filters to be generated by a separate command on
a backup of the database.
Paralellism (setting ConcurrentSends) and end-to-end garbage collection
tests will be restored in a subsequent commit.
Solves https://github.com/storj/team-metainfo/issues/121
Change-Id: Iaf8a33fbf6987676cc3cf74a18a8078916fe673d
Our Test Versions still requires 1.16 to be compatible with our oldest
uplink versions. These changes make the code compile with 1.16.
Also, it makes go generate work in private/apigen/example.
Change-Id: Ib2f7493941a16f361328fe01d2be293f26123719
Currently the paths were set relative to the root of the module,
however the code did not ensure that we are running relative to the
module directory.
Also, ensure typescript output corresponds to our styling.
Change-Id: I2b3cbd4ea8f2615e35c7b58c6fb8851669c47885
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket.
This change adds integration with testplanet which makes writing
unit tests possible.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: I7b335c5dafa8cffe265c56b75d8c8f8567580893
This change adds the following endpoints:
- projects/apikeys/{id}: returns a paged list of API keys for the
project specified by the given ID
- apikeys/delete/{id}: deletes the API key specified by the given ID
Additionally, the API Go code generator has been given the ability to
process unsigned integer parameters.
Change-Id: I5ff24e012da24a3f06bea1ebb62bae6ff62f951a
Today each storagenode should have a port which is opened for the internet, and handles DRPC protocol calls.
When we do a HTTP call on the DRPC endpoint, it hangs until a timeout.
This patch changes the behavior: the main DRPC port of the storagenodes can accept HTTP requests and can be used to monitor the status of the node:
* if returns with HTTP 200 only if the storagnode is healthy (not suspended / disqualified + online score > 0.9)
* it CAN include information about the current status (per satellite). It's opt-in, you should configure it so.
In this way it becomes extremely easy to monitor storagenodes with external uptime services.
Note: this patch exposes some information which was not easily available before (especially the node status, and used satellites). I think it should be acceptable:
* Until having more community satellites, all storagenodes are connected to the main Storj satellites.
* With community satellites, it's good thing to have more transparency (easy way to check who is connected to which satellites)
The implementation is based on this line:
```
http.Serve(NewPrefixedListener([]byte("GET / HT"), publicMux.Route("GET / HT")), p.public.http)
```
This line answers to the TCP requests with `GET / HT...` (GET HTTP request to the route), but puts back the removed prefix.
Change-Id: I3700c7e24524850825ecdf75a4bcc3b4afcb3a74
When enconding structs into JSON, byte slices are marshalled as base64
encoded string using the base64.StdEncoding.Encode():
ea9c3fd42d/src/encoding/json/encode.go (L833-L861)
We, however, expect API Secrets to be encoded as base64URL, so when
an marshalled secret (with byte slice type) is added to the multinode
dashboard, it fails with `illegal base64 data at input byte XX`.
This change changes the type of APISecret field in the
multinode/nodes.Nodes struct to use multinodeauth.Secret type instead
of []byte.
multinodeauth.Secret is extended with custom MarshalJSON and
UnmarshalJSON methods which implement the json.Marshaler and
json.Unmarshaler interfaces, respectively.
Resolves https://github.com/storj/storj/issues/4949
Change-Id: Ib14b5f49ceaac109620c25d7ff83be865c698343
Similar to the existing snapshot based tests of satellite/metabase db we make a migration here which is:
* dedicated to unit tests
* faster (with less steps)
* but safe: additional unit test ensures that the snapshot based migration and normal prod migration have the same results.
Change-Id: Ie324b09f64b4553df02247a9461ece305a6cf832
This change implements a unit test for ensuring proper
processing of requests and responses by generated API code.
Additionally, this change requires API handlers to explicitly receive
Monkit scopes rather than assuming that `mon` will always exist in the
generated API code's namespace.
Change-Id: Iea56f139f9dad0050b7d09ea765189280c3466f2
I don't know why the go people thought this was a good idea, because
this automatic reformatting is bound to do the wrong thing sometimes,
which is very annoying. But I don't see a way to turn it off, so best to
get this change out of the way.
Change-Id: Ib5dbbca6a6f6fc944d76c9b511b8c904f796e4f3
- Previously unused struct Endpoint.Request now defines the form
of the request body.
- Path parameters (e.g. "id" in "/delete/{id}") are defined in
the Endpoint.PathParams field.
- Endpoint.Params has been renamed to Endpoint.QueryParams to
eliminate confusion.
Change-Id: Ifef51ca2f362c33086f0e43e936d50b0fdd18aa1
Previously there was no realtime administration of the storage usage
during copies. Now there is.
Closes https://github.com/storj/storj/issues/4719
Change-Id: I0d536bf551d16208116c3aceac89ed590ec473bf
This change fixes the issue where the API generator would produce
different Go code for the same API definition upon each invocation
due to the random nature of map iteration.
Change-Id: I6770a10faf06311c24f541611c25d0b2b0f8e521
A message intended to diagnose issues in a previous change was
accidentally allowed to remain in finalized code and merged into
the codebase.
Change-Id: I7df662a81e3790de065beeb6db54be5280ac2fa1
This change resolves several issues:
* Imports can no longer be duplicated
* The import statement now conforms to Storj's code style requirements
* Packages are imported as needed, eliminating extraneous imports
Change-Id: Ie021e06bb0d472c65aa3575db94bc81ccac108e3
This change integrates the session management database functionality
with the web application. Claim-based authentication has been removed
in favor of session token-based authentication.
Change-Id: I62a4f5354a3ed8ca80272814aad2448f901eab1b
Implemented project delete endpoint for REST API.
Added project usage status check service method to indicate if project can be deleted.
Updated project invoice status check method to indicate if project can be deleted.
Change-Id: I57dc96efb072517144252001ab5405446c9cdeb4
Implemented new service method for generating API keys.
Implemented new endpoint.
Improved multiple endpoint groups handling.
Change-Id: Iba26fbf9123707b5b4c2d5e8c5a35d507404f24a
Add storjscan wallets DB to the satellite. For now this DB is a one to one mapping of the users account to a storjscan wallet that can be used by the account holder to make payments on their Storj account.
relates to https://github.com/storj/storj/issues/4347
Change-Id: I6e65b15817b90ceb75641244f9bf173c3b4228a7
We want to remind unverified users to verify their emails:
once after 24 hours has passed and again after 5 days has passed.
Add mailservice.Service to satellite core because it is needed by the
chore for sending emails. To add the mailservice.Service to the core,
we create a helper function in satellite/peer.go to avoid duplicating
the code in both api.go and core.go. In addition to the chore, this
change adds methods to users.DB to get unverified users in need of
reminder.
Change-Id: I4e515bdf43f922788b4f965b2efb34fa32288bd1
This will apply an appropriate "subsystem" label to goroutines which are
part of the core, api, repairer, admin, or gc subsystems.
It will also label goroutines whose job it is to watch for slow shutdown
of lifecycle groups (there are a lot of these).
Finally, this will also label goroutines whose job it is to wait on the
toplevel errgroup of a subsystem.
Change-Id: I560b5fff4a0101300d6c9a67609c2d80d7424486
This change created access grant manually to save some cpu
by avoiding root key derivation and avoid dialing satellite
for project id. It affects only testplanet tests.
Change-Id: I6742bcf699cca51e658f147e6df72c6b3db78d10
Added documentation.
Replaced PUT request with POST request.
Added inline param support for PATCH request.
Replaced unix timestamps handling with RFC-3339 timestampts handling.
Added 'Bearer' method requirement for Authorization header.
Change-Id: I4faa3864051dd18826c2c583ada53666d4aaec44
Implemented new endpoint for project update using apigen.
Implemented new service method compatible with new generated api.
Change-Id: Ic0a7e0bbf3ea942275bd927d6e30cfb7e721e9c1
Testplanet limits the execution of a single test case to 3 minutes.
This change adds a Timeout field to the Testplanet's config, so test
cases can configure their timeout. This is helpful when executing larger
3rd party test suite on top of Testplanet.
Change-Id: Ibbf7c5ffdc0a9e723e7e28b885eac084f04c6ca1
Implemented new endpoint for project creation using apigen.
Implemented new service method compatible with new generated api.
Change-Id: I2bae22c8b046f21ec5bb6522f09b9c4e74bdba0c
Implemented account management api key authentication.
Extended IsAuthenticated service method to include both cookie and api key authorization.
Change-Id: I6f2d01fdc6115cb860f2e49c74980a39155afe7e
Rather than starting all servers on 127.0.0.1 start them
on a random local host to try avoid port exhaustion.
The port exhaustion is just a guess.
Change-Id: Ibf31d6a017852238d836291d703642b44ff66c0c
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
Move storagnode/console caching headers to private/web. Also,
start using them in multinode/console/server.
Change-Id: I1f0f3c9833a183476009737cece515ae7537fb83
Added new endpoint to get project's single bucket usage rollup.
Extended generation code to handle service method args.
Change-Id: Ief768632a801c047c66e0617056fbd7b30427b33
Added new projectaccounting query to get project's single bucket usage rollup.
Added new service method to call new query.
Added implementation for IsAuthenticated method which is used by new generated API.
Change-Id: I7cde5656d489953b6c7d109f236362eb465fa64a
Added a feture flag which will be used to indicate if new generated console api is used.
Fixed some comments from previous PR.
Change-Id: Ice31c998b0b347028a491c971a648fd1269bfd49
