Pieces count in DB are stored as int64 and we would like to align bloom
filter processing with this type.
Change-Id: Iaec767e609a40d802077ae057520541805a7c44f
We added nodes.disqualification_reason recently, but we didn't add a
corresponding column in the reputations table (despite having a
corresponding `disqualified` column there).
Without this change, the (very useful and informative) assignments to
updateFields.DisqualificationReason in reputations.go have no effect.
Refs: https://github.com/storj/storj/issues/4601
Change-Id: I77404902ca64b56aed72f1de76b303fe82b76aab
Set disqualification reason when reputations stats are updated on DB.Update.
Added tests for DisqualifyNode and for disqualification cases which happens during Update.
Change-Id: I00130ab5d9722422805159ad2f183c205de60f7e
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
Add a RepairExcludedCountryCodes config flag for overlay for providing a list of country codes to exclude nodes from target repair selection.
Mark segments with less than repairThreshold pieces in countries not in the RepairExcludedCountryCodes as not healthy.
With this change, the repair process is not affected. The segment will be removed from the repair queue by the repairer.
Another change will handle the logic at the repairer level.
Fixes https://github.com/storj/team-metainfo/issues/95
Change-Id: I9231b32de117a116488de055a3e94efcabb46e81
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
We had a bug in the stray nodes chore where nodes who had not been seen
in several months were not being DQd. We figured out that this was
happening because we were using two queries: The first to grab
nodes where last_contact_success < some cutoff, the second to DQ them
unless last_contact_success == '0001-01-01 00:00:00+00'. The problem
is that if all of the nodes returned from the first query had
last_contact_success of '0001-01-01 00:00:00+00', we would pass them to
the second query which would not DQ them. This would result in the stray
nodes DQ loop ending since we found a number of nodes to DQ less than the
limit.
The fix: add the "WHERE last_contact_success != '0001-01-01
00:00:00+00'::timestamptz" to the selection query.
Change-Id: I4e60de90b68d8745d641b4467c2b23e0e56f7dff
We don't use this column for anything. If you want to know if a node is
contained, you can check the pending_audits table.
Change-Id: I8da1d8e01a2dcaff63c5067a7927b5451424ad04
nodes and audit_history tables
This PR removes all code reference to audit_histories table and
```
audit_reputation_alpha, audit_reputation_beta,
unknown_audit_reputation_alpha, unknown_audit_reputation_beta,
```
columns from nodes table.
It also drops audit_histories table from the db since the code
that's referencing it currently are not being used.
Change-Id: Ifcda8db36afb3a333d487ff831f2fdefc8b02a4c
gracefulexit
With the effort to move audit related data into reputation store, this
PR updates gracefulexit endpoint to use reputation service to get a
node's audit score
Change-Id: Iad93ea689ad67ff9c57c7be16687e21e715fab7a
package in audit
This PR implements reputation store and replace overlay in audit service
to use such store for storing node's audit stats.
In order to keep the changeset smaller, most of the changes in this PR is for copying audit logic in overlay to
reputation package. In a following PR, the duplicating code will be
removed from overlay.
Change-Id: I16c12494a0970f44c422b26cf603c1dc489e5bc1
Define service and DB interface for storing node reputation data
and updating the overlay cache.
Add overlay service and DB method UpdateReputation.
See https://github.com/storj/storj/pull/4144
Change-Id: Iedd8bd3274457d26c595919303d55327c1464b8c
Until now, whenever audits were recorded we would try to delete
the node from containment just in case it exists. Since we now
want to treat segment repair downloads as audits, this would
erroneously remove nodes from containment, as repair does not go
through a Reverify step. With this changeset, (Batch)UpdateStats
will not remove nodes from containment. The Reverify method will
remove all necessary nodes from containment.
Change-Id: Iabc9496293076dccba32ddfa028e92580b26167f
Improve UpdateCheckIn on a contended row:
name old time/op new time/op delta
UpdateCheckInContended-100x-32 2.29s ±55% 0.17s ±61% -92.45% (p=0.008 n=5+5)
Change-Id: I053ab9f1cff136c306e5fb57f5e355cdc0269a8c
Currently we were duplicating code for AS OF SYSTEM TIME in several
places. This replaces the code with using a method on
dbutil.Implementation.
As a consequence it's more useful to use a shorter name for
implementation - 'impl' should be sufficiently clear in the context.
Similarly, using AsOfSystemInterval and AsOfSystemTime to distinguish
between the two modes is useful and slightly shorter without causing
confusion.
Change-Id: Idefe55528efa758b6176591017b6572a8d443e3d
When audits are being recorded, we automatically add some SQL to remove
the node from the pending audits table in case it exists. They are
removed from pending audits even if the node was offline for the audit.
This is not the correct behavior.
Add statement to record audit results in reverify tests to ensure no
more false positives.
Change-Id: I186ae68bc5e7962ef6c5defbebc1d95e63596a17
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
When nodes check in for the very first time, if the satellite can't ping
them back, they are inserted into the nodes table with
last_contact_success of '0001-01-01 00:00:00+00'. If the stray nodes
chore runs before the node can fix their problem, they are DQd.
Solution: when DQing stray nodes, dont DQ where last_contact_success =
'0001-01-01 00:00:00+00'::timestamptz
Change-Id: I477a02d5ef85b2c930ed6b7d99a4d1995169bca8
instead of only generating invoices for nodes that had some
activity, we generate it for every node so that we can find
and pay terminal nodes that did not meet thresholds before
we recognized them as terminal.
Change-Id: Ibb3433e1b35f1ddcfbe292c034238c9fa1b66c44
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
Previously we would select a limited number of nodes for DQ in a
CTE and run the update on that set in a single transaction. This
could lead to locking on the table, so instead we select and update
in separate transactions.
Change-Id: I1e802c0845e829eeadcee4fa382f58462515fdb1
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
Full scope:
private/testplanet,satellite/{overlay,satellitedb}
Description:
In most cases, downtime tracking with audits will eventually lead
to DQ for nodes who are unresponsive. However, if a stray node has no
pieces, it will not be audited and will thus never be disqualified.
This chore will check for nodes who have not successfully been contacted
in some set time and DQ them.
There are some new flags for toggling DQ of stray nodes and the timeframes
for running the chore and how long nodes can go without contact.
Change-Id: Ic9d41fdbf214736798925e728245180fb3c55615
GetSuccessfulNodeNotCheckedInSince and GetOfflineNodesLimited are overlay methods
which were only used by the previous downtime tracking system which has been removed.
These methods should also be removed.
Change-Id: Idb829d742e1f987e095604423fff656fe581183e
* Separate audit history interface into its own file in the overlay
package
* Add overlay.AuditHistory struct so that internalpb.AuditHistory is
only used from within the database layer
* Add overlay.GetAuditHistory function for features that will require
access to detailed audit history information
* Do not return full audit history from UpdateAuditHistory - callers to
that function only need to know the online score and whether a full
tracking period has been completed
* Move audit history tests out of satellite/satellitedb, since they are
independent of database implementation
Change-Id: I35b0c4ac23bbaabd80624f8a9631c3cb1a1f33bd
Nodes which are offline_suspended will no longer be considered for new
uploads. The current threshold that enters a node into offline
suspension is 0.6. Disqualification for offline suspension is still
disabled.
Change-Id: I0da9abf47167dd5bf6bb21e0bc2186e003e38d1a
Query nodes table using AS OF SYSTEM TIME '-10s' (by default) when on CRDB to alleviate contention on the nodes table and minimize CRDB retries. Queries for standard uploads are already cached, and node lookups for graceful exit uploads has retry logic so it isn't necessary for the nodes returned to be current.
