all permissions
Without read and list permissions BeginObjectDelete won't return error
if occurs. This was breaking Batch processing because there was
assumption that without error response will be always not nil.
https://storjlabs.atlassian.net/browse/SM-590
Change-Id: I0fc9539e429110a660eb28725b266d5e4771d198
This implements a service for pointer verification. This makes the
slightly clearer, because it's not part of metainfo.
It also adds a peer identity cache which reduces database calls and peer
identity decoding.
Change-Id: I45da40460d579c6f5fd74c69bccea215157aafda
Initial change for checking bucket existence on satellite side for
requests like BeginObject and ListObjects. This is simple implementation
that is just checking bucket in DB but should be improved in future to
avoid DB calls as much as possible.
Part of https://storjlabs.atlassian.net/browse/USR-365
Change-Id: I9076acddc44d7dbfa7612a1c24a007de01621583
Metainfo method validateAuth checks things like API key, user permission
and rate limit but at the end all errors were returned as
rpcstatus.Unauthenticated.
Old Metainfo is not touched to avoid backward compatibility issues.
Change-Id: I78eb276210fc50151da58a5c84e13ecd0961da29
uplinks
New libuplink is not storing encryption values in with bucket but old
uplinks are using those values for configuration. If bucket was created
with new libuplink we will send back satellite defaults.
Change-Id: Ie1bf3682847e07b302270b4c4bf1a7219f4bf011
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these requests as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
This change should handle issue we have in older uplinks with incorrect
order of storing pointers.
Change-Id: I86514c95df169e6fbc91b52e5117472cae70cb8b
Fixes https://storjlabs.atlassian.net/browse/USER-240
- Adds UnsynchronizedPut method to metainfo service that overwrites any
existing pointer under the same path
- Uses UnsynchronizedPut in the metainfo endpoint for committing the
segments
Change-Id: Icb43f31ea33f14066ca9dfdcf226eb3079b90948
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
Allow rate limit project cache to expire so we can make project level rate limit changes without restarting the satellite process.
Change-Id: I159ea22edff5de7cbfcd13bfe70898dcef770e42
Satellite now is keeping RS values for uplink but old uplinks were using
default bucket settings. Because of that we need to override buckets
settings with satellite settings to avoid breaking older uplinks.
Change-Id: Ia1068db70e4adbf741c5e81d27d9e39799049c22
This reverts commit 8772867855.
for uplink versions v0.25.0 through v0.30.7, there's a bug with multiplesegment upload
where the last segment is inline caused by this commit.
Change-Id: If375e186b23265586caf08991c25980e99f3cc1a
Change is adding object deletion to BeginObject request (before upload).
Now when satellite controls deletion we can move deletion before upload
to satellite. This change improves two things:
* no need for additional request to delete object before upload (need
one more change to storj/uplink)
* fix an issue with lack of permissions to upload if caveat allows only
for writing (e.g. disallow deletes but allows to write)
https://storjlabs.atlassian.net/browse/V3-3362
Change-Id: Ic453146298cdd302df290c532123731a3f99e38e
Change DeleteObjectPieces for deleting the segments' pointers of an
object in a reverse order.
Last segment: L
N: total number of segments
Deleting in reverse order is: L, n-1 to 0
Deleting in reverse order makes BeginDeleteObject usable to delete
partially uploaded objects that were interrupted (e.g. upload
cancellation).
With this change, the uplink upload cancellation, can be changed to use
BeginDeleteObject to cleanup already uploaded segments without having to
retrieve orders and dial every single node which stored a piece.
Ticket: https://storjlabs.atlassian.net/browse/V3-3525
Change-Id: Ieca6fd3801c4b71671811cb5f08a99d5146928a6
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these request as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
Change-Id: If170e78c8410f5ba5916cbff6a29b9221db9ce2e
live accounting used to be a cache to store writes before they are picked up during
the tally iteration, after which the cache is cleared. This created a window in which
users could potentially exceed the storage limit. This PR refactors live accounting to
hold current estimations of space used per project. This should also reduce DB load
since we no longer need to query the satellite DB when checking space used for limiting.
The mechanism by which the new live accounting system works is as follows:
During the upload of any segment, the size of that segment is added to its respective
project total in live accounting. At the beginning of the tally iteration we record
the current values in live accounting as `initialLiveTotals`. At the end of the tally
iteration we again record the current totals in live accounting as `latestLiveTotals`.
The metainfo loop observer in tally allows us to get the project totals from what it
observed in metainfo DB which are stored in `tallyProjectTotals`. However, for any
particular segment uploaded during the metainfo loop, the observer may or may not
have seen it. Thus, we take half of the difference between `latestLiveTotals` and
`initialLiveTotals`, and add that to the total that was found during tally and set that
as the new live accounting total.
Initially, live accounting was storing the total stored amount across all nodes rather than
the segment size, which is inconsistent with how we record amounts stored in the project
accounting DB, so we have refactored live accounting to record segment size
Change-Id: Ie48bfdef453428fcdc180b2d781a69d58fd927fb
Create a service for deleting pieces of storage nodes.
Currently the DeletePieces method returns after a success threshold,
completion or a timeout.
The end goal is to return when reaching the success threshold and
leaving the remaining goroutines running after DeletePieces method
returns and add a life cycle to the service that it waits for them when
it closes.
This is the first commit for ticket:
https://storjlabs.atlassian.net/browse/V3-3476
Change-Id: If740bbf57c741f880449980b8176b036dd956c7b
Add a back-pressure mechanism to the satellite metainfo
DeleteObjectPieces method for returning once the 75% of successful
deleted pieces is reached.
Change-Id: Ia38df49fba5838f0605c40a77cfff8e3442cb5b0
The DeleteObjectPieces should print out the warning on closing the
connections only if there was an error.
Change-Id: If3d7ab256d8508c08388c1f22c7dd1eb819d2509
The DeleteObjectPieces must close the storage node client once it has
finished deleting its pieces.
Change-Id: I08eb8af8e4215d77d59b52f5055211b918374ab4
DeleteObjectPieces must not call overlay cache KnownReliable method with
an empty list of node IDs for avoiding to log a useless noisy warning.
Change-Id: Ibe2a34f2913f003d3ba020f9764c1369fa63123b
Use the helper function IsRPC of the err2 package rather than checking
if an error is of a specific RPC status code with an 'if' conditional.
Change-Id: Ibe89d6c2d836307c3112a6d7cc6bf95f0f985fd2
deletePointer must return an ErrObjectNotFound rather than a rpc status
error NotFound because the callers must distinguish such error if it
comes from the getPointer or from the UnsynchronizedDelete.
Change-Id: I68b4e45a2765e63b73bf85c2c39a5fc0198373f6
We are missing some tests for new Metainfo API that we have for old API.
This is first change to adjust old tests to new API.
Change-Id: Ie2b16bf85de8633662f952e863dbf3d409d801d9
For improving the deletion performance we are shifting the
responsibility to delete the pieces of the object from Uplink to the
Satellite.
BeginDeleteObject was the first call to return the stream ID which was
used for after retrieving the list of segments and then get addressed
order limits for deleting the pieces (of each segment) from the storage
nodes.
Now we want the Satellite deletes the pieces of all the object segments
from the storage nodes hence we don't need anymore to have several
network round trips between the Uplink and the Satellite because the
Satellite can delete all of them in the initial BegingDeleteObject
request.
satellite/metainfo.ListSegments has been changed to return 0 items if
the pointer of the last segment of an object is not found because we
need to preserve the backward compatibility with Uplinks that won't be
updated to the last release and they rely on listing the segments after
calling BeginDeleteObject for retrieving the addressed order limits
to contact the storage nodes to delete the pieces.
Change-Id: I5f99ecf27d62d65b0a062936b9b17581ef692af0
The endpoint listSegmentsManually method misses a check for the limit
parameter, otherwise it can return inconsistent results when it's 0 or
negative.
When 0 or negative, without the check, it returns no segments but also
that there isn't more segments and that isn't correct.
The function is only called from the Endpoint.ListSegments method and
the function cares to ensure that limit is always greater than 0, but if
the method doesn't check that a new future caller could misuse it and
provoke a bug.
Additionally:
* Documentation for the modified function has been written
* The part of the function that repeated the logic of the
Endpoint.getPointer method has been removed for using that method.
* Added logging before returning an internal error in
Endpoint.getPointer.
Change-Id: I5c4f0db2292da0162db6b7d63553895808d0925a
Do some cleanup for adding new identified TODOs (associated with ticket
https://storjlabs.atlassian.net/browse/V3-3406) and remove an old one.
Change-Id: I5d20dbe1c4dee0a8279e08b05b907f4cc9dba278
