it was noticed that if you had a long lived transaction A that
was blocking some other transaction B and A was being aborted
due to retriable errors, then transaction B was never given
priority. this was due to using savepoints to do lightweight
retries.
this behavior was problematic becaue we had some queries blocked
for over 16 hours, so this commit addresses the issue with two
prongs:
1. bound the amount of time we will retry a transaction
2. create new transactions when a retry is needed
the first ensures that we never wait for 16 hours, and the value
chosen is 10 minutes. that should be long enough for an ample
amount of retries for small queries, and huge queries probably
shouldn't be retried, even if possible: it's more preferrable to
find a way to make them smaller.
the second ensures that even in the case of retries, queries that
are blocked on the aborted transaction gain priority to run.
between those two changes, the maximum stall time due to retries
should be bounded to around 10 minutes.
Change-Id: Icf898501ef505a89738820a3fae2580988f9f5f4
before dbx would generate a compilcated blob of conditions that
encoded a row comparison, which only optimized to an index seek
on cockroachdb. this means that sqlite and postgres both had
quadratic behavior on paged queries of this form. instead, use
the implicit row construction feature supported in all of the
databases to do paged support so that they all optimize well.
Change-Id: Iac8703929ba2a59ee3ffa619b916d12663422887
The old migration was not working. It was updateding pending (status 0)
and failed (status -1) to completed (status 100).
Change-Id: I808ff3cc692fe6c698ce26a8b411b134e67b752b
A uuid.UUID is an array of bytes, and slicing it refers to the
underlying value, much like taking the address. Because range
in Go reuses the same value for every loop iteration, this means
that later iterations would overwrite earlier stored project
ids. We fix that by making a copy of the value before slicing it
for every loop iteration.
Change-Id: Iae3f11138d11a176ce360bd5af2244307c74fdad
Currently storage tests were tied to the default lookup limit.
By increasing the limits, the tests will take longer and sometimes
cause a large number of goroutines to be started.
This change adds configurable lookup limit to all storage backends.
Also remove boltdb.NewShared, since it's not used any more.
Change-Id: I1a052f149da471246fac5745da133c3cfc27582e
Currently Cockroach DB setup takes a significant amount of time.
This flattens the database setup into a single query,
which improves the test time significantly.
The migration tests still test each migration separately.
Change-Id: Iaca16f34a6af3926fa2b5ebf618f939fd59460b3
Since incoming times may be in any time zone, and we want the output
to be in UTC and for them to have 00:00:00 hours, minutes and seconds
we first convert the incoming timestamp to UTC before doing the
truncate to the day and adding a day.
Because the old code always returned a timestamp that was in the
future, this is just for efficiency.
Change-Id: Ie692d47bca8691e73852c822d5c56cf8773d99b4
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
Replace all the remaining uses of sql.DB with tagsql.DB to
fix issues with context cancellation.
Introduce tagsql.Open which helps to get rid of all tagsql.Wrap-s.
Use tagsql in cockroachkv and postgreskv.
Change-Id: I8946d203341cb85a25976896fc7881e1f704e779
Also added temporary types withRebind and withTagTx,
which will be later removed. Currently they help to avoid
changing the whole codebase at the same time.
Change-Id: I7f07ba8f4709a23a463bfa67464628665a05808f
warning: databases migrated to version 77 before this commit
is merged must be manually re-migrated. this should not be a
problem for anything but staging databases.
Change-Id: Ie1631c48379472352014183ee43f1465e22200f7
this commit introduces the reported_serials table. its purpose is
to allow for blind writes into it as nodes report in so that we have
minimal contention. in order to continue to accurately account for
used bandwidth, though, we cannot immediately add the settled amount.
if we did, we would have to give up on blind writes.
the table's primary key is structured precisely so that we can quickly
find expired orders and so that we maximally benefit from rocksdb
path prefix compression. we do this by rounding the expires at time
forward to the next day, effectively giving us storagenode petnames
for free. and since there's no secondary index or foreign key
constraints, this design should use significantly less space than
the current used_serials table while also reducing contention.
after inserting the orders into the table, we have a chore that
periodically consumes all of the expired orders in it and inserts
them into the existing rollups tables. this is as if we changed
the nodes to report as the order expired rather than as soon as
possible, so the belief in correctness of the refactor is higher.
since we are able to process large batches of orders (typically
a day's worth), we can use the code to maximally batch inserts into
the rollup tables to make inserts as friendly as possible to
cockroach.
Change-Id: I25d609ca2679b8331979184f16c6d46d4f74c1a6
everyone was importing it as dbx anyway. why should it be
named satellitedb? so yeah just pass the "-p dbx" flag.
Change-Id: I5efa669f4f00f196b38a9acd0d402009475a936f
This reverts commit 8e242cd012.
Revert because lib/pq has known issues with context cancellation.
These issues need to be resolved before these changes can be merged.
Change-Id: I160af51dbc2d67c5449aafa406a403e5367bb555
this will allow for some nice runtime analysis down the road.
also, this allows for wrapping database handles in a way that
can interact with these contexts
requires https://review.dev.storj.io/c/storj/dbx/+/514
Change-Id: Ib087b7cd73296dd2c1e0331314da34d861f61d2b
When an uplink requests an upload or download from the satellite we are trackig the
allocated bandwidth twice. The value in bucket_bandwidth_rollups is used
for project limits but the value in storagenode_bandwidth_rollups is not
used at all. We can increase the performance by removing it. Uplinks
will get a faster response from the satellite.
Change-Id: Icccd41f94107ef34668f30f99bf5f728c384b07e
any database error doesn't mean the order wasn't found. for example
in cockroach it may say that the transaction is aborted. then what?
maybe we get big old row level deadlocks like we've observed? so
instead explicitly check for ErrNoRows to reject the order and bail
out otherwise. the surrounding logic will give it a retry.
Change-Id: I6e1f8f6e6a6def3e45b44f5088cbdc158e1098e4
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb
Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
turns out portable sed is hard: it has to work with both
linux and bsd sed, etc. instead, use a really really basic
bash script and a temporary file. this should be much less
likely to cause issues on a wide range of machines.
Change-Id: Ia759789fb52aa1ee3361426bb6c02ed4eac3d23a
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
I also fleshed out consoledb_test.go to do actual inserts and gets to
make sure things were working correctly.
Change-Id: I089bf4c776d15dc8578080e26760bd6dff4beec9
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: I22b850ce5859fa07d13bf475be5140e6bde95b8a
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The WithTx
helper functions in dbutil and dbx do that automatically. I am changing
this code to use those helpers instead.
Change-Id: Iaf492af35471931125f2b7365aa4338f44154881
Disqualifies a node when the node fails to complete a graceful
exit.
Adds a new DisqualifyNode method to the overlay cache, since there
wasn't an existing method to disqualify a node but do nothing else
to its stats.
Adds checks to existing tests to make sure that a storage node that
fails a graceful exit is marked as disqualified in the overlay
cache.
https: //storjlabs.atlassian.net/browse/V3-3342
Change-Id: I4d554a519ab59db31ad3b8e28764c8683a6e3888
crdb.ExecuteTx is great, but I don't think it will work right with
PostgreSQL. It works by way of cockroach savepoints, which allows
it to react to retryable errors, whereas tx.Commit() doesn't. But
I don't think PostgreSQL savepoints work exactly the same way. I'm not
100% sure, but it doesn't seem worth the risk.
So, I'm switching one case here to use the new dbutil.WithTx instead,
which will use crdb.ExecuteTx if appropriate. The other case doesn't
need a transaction at all.
Change-Id: I39283f3b5d8d47596db7aff5048bb74597e5918f
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: I660540885a0784fae844cf99376d1537e208fa69
overlay.GetOfflineNodesLimited
We only care about node ID, address, and last contact success/failure
from the downtime service, so the overlay should only return these
values for the downtime-specific queries.
Change-Id: I08a6ecfdd2a12b82cae62e87d6adeab53975bfce
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: Icd3da71448a84c582c6afdc6b52d1f345fe9469f
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: Ibaadd2c8540ba5c8cccd6ecbf529017ab98b78ca
Transactions in our code that might need to work against CockroachDB
need to be retried in the event of a retryable error. The transaction
helper functions in dbutil do that automatically. I am changing this
code to use those helpers instead.
Change-Id: Id24906f5f3ae83245dabb218e1f70e0bcb3b417a
Adds the KnownReliable method to Overlay Service that filters all nodes
from the given list to be only reliable nodes (online and qualified).
The method return []*pb.Node of reliable nodes. The pb.Node values are
ready for dialing.
The first use case is when deleting an object to efficiently dial all
reliable nodes holding a piece of that object and send them a delete
request.
Change-Id: I13e0a8666f3807c5c31ef1a1087476018a5d3acb
this will allow us to inspect the type of `db.Driver()` on *sql.DB
connections to correctly differentiate between pg and crdb conns.
as a bonus, this moves all concerns about when to replace "cockroach://"
with "postgres://" out of view, letting the thin shim "driver" take care
of that.
Change-Id: Ib24103ab7c508231e681f89a7321b623e4e125e9
Backstory: I needed a better way to pass around information about the
underlying driver and implementation to all the various db-using things
in satellitedb (at least until some new "cockroach driver" support makes
it to DBX). After hitting a few dead ends, I decided I wanted to have a
type that could act like a *dbx.DB but which would also carry
information about the implementation, etc. Then I could pass around that
type to all the things in satellitedb that previously wanted *dbx.DB.
But then I realized that *satellitedb.DB was, essentially, exactly that
already.
One thing that might have kept *satellitedb.DB from being directly
usable was that embedding a *dbx.DB inside it would make a lot of dbx
methods publicly available on a *satellitedb.DB instance that previously
were nicely encapsulated and hidden. But after a quick look, I realized
that _nothing_ outside of satellite/satellitedb even needs to use
satellitedb.DB at all. It didn't even need to be exported, except for
some trivially-replaceable code in migrate_postgres_test.go. And once
I made it unexported, any concerns about exposing new methods on it were
entirely moot.
So I have here changed the exported *satellitedb.DB type into the
unexported *satellitedb.satelliteDB type, and I have changed all the
places here that wanted raw dbx.DB handles to use this new type instead.
Now they can just take a gander at the implementation member on it and
know all they need to know about the underlying database.
This will make it possible for some other pending code here to
differentiate between postgres and cockroach backends.
Change-Id: I27af99f8ae23b50782333da5277b553b34634edc
for storj-sim to work, we need to avoid schemas in cockroach urls
so we have storj-sim create namespaced databases instead of schemas
and we have the migrate command create the database in the same way
that it would create a schema for postgres. then it works!
a follow up commit will move the creation of the database/schemas
into storj-sim's setup step so that we can avoid doing these icky
creations during normal migration calls. it will also make the
pointerdb have an explicit call to migrate instead of just doing
it every time it's opened.
Change-Id: If69ef5cb96b6866b0438c761bd445afb3597ae5f
satellitedb migration tests ran against multiple base versions, however after the merging all the steps the base versions didn't exists anymore - which meant none of the migration tests were actually running.
first, so that they all work the same way, because it's getting
complicated, and second, so that we can do the appropriate thing
instead of CREATE SCHEMA for cockroachdb.
Change-Id: I27fbaeeb6223a3e06d97bcf692a2d014b31465f7
it doesn't necessarily _have_ to be UTC; the time is correct as returned
either way, but this will make it a little less prone to variance.
also, there is a test that depends on the time being returned in UTC.
Change-Id: Ia71e24ecd9973ba70a1cfb5621a3030a5c82d004
This will make it so we don't need to comment out those lines every time
we want to enable the cockroachdb tests during development.
Once it's ready this flag can go away.
* update migration steps, add crdb support to testplanet
* add crdb support
* have jenkins run a bares bones crdb compat test
* skip crdb tests
* skip crdb tests
* fix root_piece_id column
* write crdb store to tmp dir
* escape
* merge migration
* rm migration versions
* rm unneeded migration test data
* create index w/postgres + crdb compatible syntax
* add default to offers.invitee_credit_duration_days
* changes so that schema matches from master to branch
* change to be crdb compatible
* add check to confirm db version
* mv version check to migration
* update tests
* add minversion to sadb migration, update tests
* confirm min version for all dbs in a migration
* add validate migration to sadb
* fix lint err
* rm min version check from migrate
* change sadb check
* hard code min db version
* fix comment
* satellite/nodeselection: dont select nodes that havent checked in for a while
* change testplanet online window to one minute
* remove satellite reconfigure online window = 0 in repair tests
* pass timestamp into UpdateCheckIn
* change timestamp to timestamptz
* edit tests to set last_contact_success to 4 hours ago
* fix syntax error
* remove check for last_contact_success > last_contact_failure in IsOnline
* separate sadb migration, add version check
* update checkversion to do same validation as migration
* changes per CR
* add sa migration to storj-sim
* add different debug port in storj-sim for migration
* add wait for exit for storj-sim migration
* update sa docker entrypoint to support migration
* storj-sim satellite parts all wait for migration
* upgrade golang-migrate/migrate to v4 because bug
* fix go mod tidy
* add overall failure percentage check and inactive time frame check before sending a response to sno
* update comment
* delete node from transfer queue if it has been inactive for too long
* fix linting error
* add test config value
* fix nil pointer
* add config value into testplanet
* add unit test for overall failure threshold
* move timeframe threshold to chore
* update protolock
* add chore test
* add per peiece failure count logic
* change config name from EndpointMaxFailures to MaxFailuresPerPiece
* address comments
* fix linting error
* add error handling for no row returned from progress table
* fix test for graceful exit chore on storagenode
* fix typo InActive -> Inactive
* improve readability for failure threshold calculation
* update config lock
* change error handling for GetProgress in graceful exit endpoint on the satellite side
* return proper rpc error in endpoint
* add check in chore test for checking finish timestamp and queue
* update lock file and add comment
* add created at and bytes transferred
* cleanup
* rename db func to GetGracefulExitNodesByTimeFrame
* fix flag
* split into two overlay functions
* := to =
* fix test
* add node not found error class
* fix overlay test
* suggested test changes
* review suggestions
* get exit status from overlay.Get()
* check rows.Err
* fix panic when ExitFinishedAt is nil
* fix comments in cmdGracefulExit
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
* implement contact.checkin method
* add batching to update uptime checks
* rm batching
* rm other unneeded things
* fix lint
* fix unit test
* changes per CR comments
* couple more CR changes
* add identity check into grpcOpt
* fix lint
* why do you fix the test
* revert test change
* stop contact chore for repair test
* put node in cache
* comment out contact chore. See what happens
* Revert "comment out contact chore. See what happens"
This reverts commit 2e45008e36a50e0a842ae455ac83de77093d4daa.
* try stopping contact earlier
* stop contact chore in uplink_test
* replace self on chore with *RoutingTable for access to latest node info
* Revert "stop contact chore in uplink_test"
This reverts commit 302db70f4071112d1b9f7ee0279225ea12757723.
* Revert "try stopping contact earlier"
This reverts commit 806cc3b82f9d598899dafd83da9315a1cb0cb43c.
* Revert "stop contact chore for repair test"
This reverts commit dd34de1cfdfc09b972186c9ab9a4f1e822446b79.
* satellite/satellitedb: Always release savepoint
Release the savepoint when processing orders in any case.
* satellite/satellitedb: Wrap errors exec savepoints
Wrap the errors returned by the execution of savepoints operations when
processing orders.
* V3-2529: Add DB savepoint to fix issue with postgres. Add test force a rejected order
Co-Authored-By: Ivan Fraixedes <ivan@fraixed.es>
* Update satellite/satellitedb/orders.go
Creates a new chore, dbcleanup, which can be used for routine deletion of items from the satellite database and adds functionality for deletion of expired serial numbers
* update offer once redemption cap has reached
* use transaction to get offer info before insert
* update offer status when redeemable capacity has reached
* fix format
* use pgutil to check constraint error
* change error message
* satellitedb/certDB: refactors of the node certificate storage DB table
The existing implementation doesnt allow to store the complete certificate chain of uplinkIDs or storagenodeIDs, so the current table is dropped and new table will be added which addresses the storage and retrieval of certificates
pkg/identity: fixes spelling mistakes that I missed on PR#2754
Fixes V3-1992/V3-2388
* Added batch update stats for recordAuditSuccessStatus
* Added batch update stats to recordAuditFailStatus
* added configurable batch size
* build individual update/delete statements so the statements can be batched into 1 call to the DB
* notified #config-changes channel and ran make update-satellite-config-lock
* updated tests to use batch update stats
* parent 13dd501042
author Yingrong Zhao <yingrong.zhao@gmail.com> 1563560530 -0400
committer Yingrong Zhao <yingrong.zhao@gmail.com> 1563581673 -0400
parent 13dd501042
author Yingrong Zhao <yingrong.zhao@gmail.com> 1563560530 -0400
committer Yingrong Zhao <yingrong.zhao@gmail.com> 1563581428 -0400
satellite/console: add referral link logic (#2576)
* setup referral route
* referredBy
* add user id
* modify user query
* separate optional field from userInfo
* get current reward on init of satellite gui
* remove unsed code
* fix format
* only apply 0 credit on registration
* only pass required information for rewards
* fix time parsing
* fix test and linter
* rename method
* add todo
* remove user referral logic
* add null check and fix format
* get current offer
* remove partnerID on CreateUser struct
* fix storj-sim user creation
* only redeem credit when there's an offer
* fix default offer configuration
* fix migration
* Add helper function for get correct credit duration
* add comment
* only store userid into user_credit table
* add check for partner id to set correct offer type
* change free credit to use invitee credits
* remove unecessary code
* add credit update in activateAccount
* remove unused code
* fix format
* close reader and fix front-end build
* move create credit logic into CreateUser method
* when there's no offer set, user flow shouldn't be interrupted by referral program
* add appropriate error messages
* remove unused code
* add comment
* add error class for no current offer error
* add error class for credits update
* add comment for migration
* only log secret when it's in debug level
* fix typo
* add testdata
* Update overlaycache.go
Removes one select statement and columns gets filtered in first query.
Needs to be tested agains real database that this query is working and faster!
* Correct linting
reorder scans that this fit to new sql result order
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
* satellite/satellitedb: User var block for Error
To follow with the code style of the majority of the sources of the
current code base the Error variable should be in a block.
Replacing a single var expression to a block one makes the godoc more
consistent across the repository.
* satellite/satellitedb: Remove empty spaces end of line
* pkg/datarepair/repairer: Track always time for repair
Make a minor change in the worker function of the repairer, that when
successful, always track the metric time for repair independently if the
time since checker queue metric can be tracked.
* storage/postgreskv: Wrap error in Get func
Wrap the returned error of the Get function as it is done when the
query doesn't return any row.
* satellite/metainfo: Move debug msg to the right place
NewStore function was writing a debug log message when the DB was
connected, however it was always writing it out despite if an error
happened when getting the connection.
* pkg/datarepair/repairer: Wrap error before logging it
Wrap the error returned by process which is executed by the Run method
of the repairer service to add context to the error log message.
* pkg/datarepair/repairer: Make errors more specific in worker
Make the error messages of the "worker" method of the Service more
specific and the logged message for such errors.
* pkg/storage/repair: Improve error reporting Repair
In order of improving the error reporting by the
pkg/storage/repair.Repair method, several errors of this method and
functions/methods which this one relies one have been updated to be
wrapper into their corresponding classes.
* pkg/storage/segments: Track path param of Repair method
Track in monkit the path parameter passed to the Repair method.
* satellite/satellitedb: Wrap Error returned by Delete
Wrap the error returned by repairQueue.Delete method to enhance the
error with a class and stack and the
pkg/storage/segments.Repairer.Repair method get a more contextualized
error from it.
* setup referral route
* referredBy
* add user id
* modify user query
* separate optional field from userInfo
* get current reward on init of satellite gui
* remove unsed code
* fix format
* only apply 0 credit on registration
* only pass required information for rewards
* fix time parsing
* fix test and linter
* rename method
* add todo
* remove user referral logic
* add null check and fix format
* get current offer
* remove partnerID on CreateUser struct
* fix storj-sim user creation
* only redeem credit when there's an offer
* fix default offer configuration
* fix migration
* Add helper function for get correct credit duration
* add comment
* only store userid into user_credit table
* add check for partner id to set correct offer type
* change free credit to use invitee credits
* remove unecessary code
* Add partnerID on user creation
* added support for partner ID on create user in consoleql User
* add partner ID to api key if the user creating it has a partner ID associated with it
* updates for consoleal user and userinfo
* add RedeemRewards method
* remove redeem from reward.db
* add redeemable cap check in redeem
* rename offerCap to redeemableCap
* remove redeem test
* update error message
* fix build
* Trigger Jenkins
* use correct credit setting for redeem
* fix comment
* change create qury to get redeemable_cap from offers table
* change referredBy to a pointer in user credit struct
* add default offer for offers table
* fix migration test
* Trigger Jenkins
* set the default value to be correct type
* skip soon will deleted test
* fix test data
* add orderby for ListAll
* change durations, redeemable cap to be a nullable field
* remove unecessary code
* organize offers
* revert changes to go.mod and go.sum
* change OfferStatus enums back to original
* revert modified auto-gen files
* don't render empty row if offers is empty
* change return val of ListAll to Offers
* fix build
* add method to check for empty offer when rendering template
* fix typo
* fix lint and typos
* lean out IsEmpty
* dont use named return vals
* better clarify offer statuses
* change back order of setting offer.Status
* lint
* satellite/marketingweb: allow disabling rewards (#2392)
* implement handler for stop offer endpoint
* use proper text and fix data-target for free-credit stop modal
* add db interface and methods, add sa metainfo endpoints and svc
* add bucket metainfo svc funcs
* add sadb bucekts
* bucket list gets all buckets
* filter buckets list on macaroon restrictions
* update pb cipher suite to be enum
* add conversion funcs
* updates per comments
* bucket settings should say default
* add direction to list buckets, add tests
* fix test bucket names
* lint err
* only support forward direction
* add comments
* minor refactoring
* make sure list up to limit
* update test
* update protolock file
* fix lint
* change per PR
* add bucket metadata table in SA masterDB
* fix indentation
* update db model per CR comments
* update testdata
* add missing field on sql testdata
* fix args to testdata
* unique bucket name
* fix fkey constraint for test
* fix one too many commas
* update timestamp type
* Trigger Jenkins
* Trigger Jenkins yet again
* added satalite partner value attribution report. WIP
* WIP
* basic attribution report test completed. still a WIP
* cleanup
* fixed projectID conversion
* report display cleanup
* cleanup .added more test data
* added partnerID to query results
* fixed lint issues
* fix import order
* suggestions from PR review
* updated doc to reflect implementation
* clarification comments in the report SQL
* Changed based on PR suggestion
* More changes based on PR suggestions
* Changes based on PR suggestions
* reordered tests to make consistant with previous 2
* small comments cleanup
* More PR suggestions
* fixed lint issue and removed printf
* fixed var name
* Updates based on PR suggestions
* fixed message
* fixed test
* changes required after merge from master
* v3-2023: add project_id migration for bucket_storage_tallies and bucket_bandwidth_rollups
* added test data for migration 37
* corrected data format
* test sql update
* migrate script updates
* adding previous data
* fix orderdDB methods to take correct args
* update tally to save projectID in correct format
* update var names in splitBucket test
* changes per CR comments
* move offer out of marketing package and remove marketing package
* fix imports
* fix rename errors
* remove offer service
* change package name from offers to rewards
* fix linting
* remove unused code and use appropriate comment
Adds a migration step to pull in old reputation success / total counts into modern alpha / beta scores
If audit success count is less than 50, audit alpha will be set to 50
If uptime success count is less than 100, uptime alpha will be set to 100
This helps us deal with cases where nodes have not been audited or checked for uptime yet, in which case alpha/beta values of 0/0 would cause a node to be considered disqualified.
A node with audit alpha/beta of 50/0 will be disqualified on the 19th check
A node with uptime alpha/beta of 100/0 will be disqualified on the 44th check
This does not affect brand new nodes (nodes that were not in the database before this change). The alpha/beta values for those nodes will be set to 1/0 as before
* add dbx queries
* add migration file
* start service
* Add TotalReferredCountByUserId and availableCreditsByUserID
* implement UserCredits interface and UserCredit struct type
* add UserCredits into consoledb
* add setupData helper function
* add test for update
* update lock file
* fix lint error
* add invalidUserCredits tests
* rename method
* adds comments
* add checks for erros in setupData
* change update method to only execute one query per request
* rename vairable
* should return a signal from Update method if the charge is not fully complete
* changes for readability
* prevent sql injection
* rename
* improve readability
* add counters for nodes that have/have not been seen in the past 24 hours/week
* add additional uptime counters
* add monkit stats for containment mode
* satellite/satellitedb: Alter nodes disqualification column
Change the type of the 'disqualification' column of the nodes table from
boolean to timestamp.
* overlay/cache: Change Disqualified field type
Change the Disqualified field type the NodeDossier struct type from bool
to time.Time to match with the disqualified type used by the DB layer.
* satellite/satellitedb: Update queries uses disqualified
Update the queries which uses the disqualified column due to the column
type has been changed from boolean to nullable timestamp.
* docs/design: Update disqualification due impl changes
Update the disqualification design document to contain the architectural
change required to be able to restore unfair disqualified nodes in case
of an unexpected cause (bug, mistake, hard network disconnection, etc.).
* add user credits table
* change primary key, change type for credit_type, and change relation kind of foreign keys from cascade to restrict
* modify table and query methods
* modify schema
* add dbx queries
* add migration file
* add orderby to read available credit entries
* change Offers interface to separate Update method into two.
* Implement Finish and Redeem method to avoid concurrent updates
* Implement FinishOffer and RedeemOffer service methods
* add tests
* fix linting issue
* add tests for checking Finish and Redeem's results to work as expected
* fix linting error
