This change forces the test of GetObjectIPs to use multiple remote
segments (earlier versions of the test were accidentally using inline
segments). This change also revealed a small bug in the for loop code,
which is fixed.
Change-Id: Ic486b079d221952ba13553acf0ca41a8873f3f21
* The audit worker wants to get items from the queue and process them.
* The audit chore wants to create new queues and swap them in when the
old queue has been processed.
This change adds a "Queues" struct which handles the concurrency
issues around the worker fetching a queue and the chore swapping a new
queue in. It simplifies the logic of the "Queue" struct to its bare
bones, so that it behaves like a normal queue with no need to understand
the details of swapping and worker/chore interactions.
Change-Id: Ic3689ede97a528e7590e98338cedddfa51794e1b
Add online score used for the new audit history offline tracking system
to the nodes table. This allows us easy access to the node's online
score for the storagenode dashboard as well as for data analysis.
Change-Id: Ie99be1192e5236862a5b3dbed2e5ef03b9169410
We were seeing error on the last day of the month with TestProjectAllocatedBandwidthRetainTwo.
This is due to AddDate normalizes its result in the same way that Date does, so, for example,
adding one month to October 31 yields December 1, the normalized form for November 31."
I also fixed a minor UTC issue with this test as well.
Change-Id: I0157873e7befa57810e5f264a922b188890fa46a
satellite.DB.Console().Projects().GetAll database query
can be replaced with planet.Uplinks[0].Projects[0].ID
Change-Id: I73b82b91afb2dde7b690917345b798f9d81f6831
When a node's audit history "online score" passes below a configured
threshold, the node goes into "offline suspension" mode and begins a
review period, where the operator is given an opportunity to bring their
node back online.
After the review period passes, offline suspension is turned off for the
node.
In the future, if a node still has a bad online score at the end of the
review period, it will be disqualified. This is disabled right now.
In the future, if a node is in offline suspension, it will be treated as
"unhealthy". Right now, there are no consequences for being in offline
suspension.
Minor changes:
* Moves AuditHistoryConfig out of UpdateStats/BatchUpdateStats args and
into UpdateRequest.
* Adds "now" argument to UpdateStats/BatchUpdateStats args for easy
testing.
* Changes formatting strings inside buildUpdateStatement to use specific
types.
Change-Id: I032b60298840fc16e6ef831da750f2d57619a397
Currently there is confusion between responsibilities of
metainfo.Endpoint, metainfo.Service, PointerDB.
By separating database "service" into a separate package and
its types allows to disentagle them.
This gives us responsibilities:
1. metainfo.Endpoint - translates requests and permissions
2. metainfo.Service - handles requests and coordinates with
objectdeletion, piecedeletion, metabase
3. metabase.Service - communication with the database interface and invariants
Currently metabase will contain the types necessary to coordinate
information.
Change-Id: If8c992b4b9d9e70a56bbd8a378a5af6b1a2ec34e
Jenkins has been failing a lot lately due to test timeouts with CockroachDB.
TestMigrateCockroach previously took around 5 minutes, now it takes 2.
Why 103? I couldn't get 100 to work due to an error w/ NOT NULL and PKs.
Change-Id: Iec95d4e25f9d6cd36920e7f43272c486a17fa879
TestMaxOutBuckets is one of our slower tests (50-90s).
This change seems to make it 2-12s.
It reduces the number of buckets that need to be created.
It also removes unnecessary storage nodes.
Change-Id: I1012fc6e9258b2f7674b16da4e8b418741c93eea
If a segment is deleted, is modified, or expires during an audit, this
is not problematic, so we should not return errors. Functionally,
nothing changes, but our metrics around audit success rate will be
improved after this change.
Change-Id: Ic11df056b2c73894b67a55894bd4d58c00470606
This PR changes DeleteBucket to be able to delete all objects within a
bucket if `DeleteAll` is set in `BucketDeleteRequest`.
It also changes `DeleteBucket` API to treat `ErrBucketNotFound` as a
successful delete operation instead of returning an error back to the
client.
Change-Id: I3a22c16224c7894f2d0c2a40ba1ae8717fa1005f
Add a function to the overlay cache called UpdateAuditHistory, which
allows us to add online or offline audits to a particular node's audit
history, and get that node's "online score" for the configured tracking
period.
The next step will be to use UpdateAuditHistory from inside
BatchUpdateStats/UpdateStats, so that audit history is actually updated
when nodes get audited, and we can suspend nodes based on their online
score.
Change-Id: I2289105e6961e68e829a987ff756b0e576fab120
This change accomplishes multiple things:
1. Instead of having a max in flight time, which means
we effectively have a minimum bandwidth for uploads
and downloads, we keep track of what windows have
active requests happening in them.
2. We don't double check when we save the order to see if it
is too old: by then, it's too late. A malicious uplink
could just submit orders outside of the grace window and
receive all the data, but the node would just not commit
it, so the uplink gets free traffic. Because the endpoints
also check for the order being too old, this would be a
very tight race that depends on knowledge of the node system
clock, but best to not have the race exist. Instead, we piggy
back off of the in flight tracking and do the check when
we start to handle the order, and commit at the end.
3. Change the functions that send orders and list unsent
orders to accept a time at which that operation is
happening. This way, in tests, we can pretend we're
listing or sending far into the future after the windows
are available to send, rather than exposing test functions
to modify internal state about the grace period to get
the desired effect. This brings tests closer to actual
usage in production.
4. Change the calculation for if an order is allowed to be
enqueued due to the grace period to just look at the
order creation time, rather than some computation involving
the window it will be in. In this way, you can easily
answer the question of "will this order be accepted?" by
asking "is it older than X?" where X is the grace period.
5. Increases the frequency we check to send up orders to once
every 5 minutes instead of once every hour because we already
have hour-long buffering due to the windows. This decreases
the maximum latency that an order will be reported back to
the satellite by 55 minutes.
Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
services
This PR adds a limiter on the amount of concurrent objects deletion can be handled so
we don't run out of memory.
Change-Id: Id2ce368af6f86845fcdfd34cb2f5e460efe9b272
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.
The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.
Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
This change will require less work for the user of peiecedeletion
service by moving overlay database call into the package.
Change-Id: I14a150ab71fe885780e7a7a74db006a779507ae5
This adds the unimplemented GetObjectIPs method to metainfo endpoint so
we can import new common protobuf definitions.
Change-Id: I154f26baccb6bb3c66de3eb25611930545c9754b
When investigating a gap in storage usage data in the SN dashboard, I noticed that there were 2 entries in the accounting_rollups table on the date of the gap.
This change accounts for multiple entries in the accounting_rollups table for a given day.
Change-Id: Ibf2b5d0455117cb0417163e8fcfb7e509d594171
It's an obsolete table from earlier state of Stripe invoices
implementation. No code is currently using it. It is confirmed that this
table is currently empty across all satellites.
Change-Id: I12d2756578faf8418ea8f3b09088e885694b8925
Small extension to test case where another partner is upload/downloading
to/from the same bucket as partner which creates this bucket.
Change-Id: Ib674fe5f95f868b71341e30aba5e2440847738f4
Use new objectdeletion package for deleting pointers.
In the best case scenario, it will make on database call to fetch
information about the number of segments. And another request to delete
and fetch information about other segments.
This PR also changes our object deletion API to return no error when an
object is not found but instead consider such operation as success. This
behavior is asligned with S3 API and makes the code less complex.
Change-Id: I280c56e8b5d815a8c4dafe8227689467e899775a
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.
Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
This change removes the overlay function FindStorageNodesForRepair,
which skips using the node selection cache and hits the database
directly. Otherwise, it is functionally identical to
FindStorageNodesForUpload, which checks the node selection cache first.
When selecting nodes for PUT_REPAIRs, we now call
FindStorageNodesForUpload instead of FindStorageNodesForRepair to reduce
database load.
Change-Id: If34e109695b2ed2b8fb6759115bf769a3459684e
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.
In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).
In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.
In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.
The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.
Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.
Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
