FileWalker implements methods to walk over pieces in
in a storage directory.
This is just a refactor to separate filewalker functions
from pieces.Store. This is needed to simplify the work
to create a separate filewalker subprocess and reduce the
number of config flags passed to the subprocess.
You might want to check https://review.dev.storj.io/c/storj/storj/+/9773
Change-Id: I4e9567024e54fc7c0bb21a7c27182ef745839fff
Calling stat() (really, lstat()) on every file during a directory walk
is the step that takes up the most time. Furthermore, not all directory
walk uses _need_ to have a stat done on every file. Therefore, in this
commit we avoid doing the stat at the lowest level of
walkNamespaceInPath. The stat will still be done when it is requested,
with the Stat() method on the blobInfo object.
The major upside of this is that we can avoid the stat call on most
files during a Retain operation. This should speed up garbage collection
considerably.
The major downside is that walkNamespaceInPath will no longer
automatically skip over directories that are named like blob files, or
blob files which are deleted between readdir() and stat(). Callers to
walkNamespaceInPath and its variants (WalkNamespace,
WalkSatellitePieces, etc) are now expected to handle these cases
individually.
Thanks to forum member Toyoo for the insight that this would speed up
garbage collection.
Refs: https://github.com/storj/storj/issues/5454
Change-Id: I72930573d58928fa25057ed89cd4ec474b884199
This ensures that empty trash and restore trash cannot run at the same
time.
Fixes https://github.com/storj/storj/issues/5416
Change-Id: I9d2e3aa3d66e61e5c8a7427a95208bb96089792d
Adds new method Exists which can be used to verify which
requested piece ids exists on storage node. Will verify only pieces
which belongs to the satellite that used that endpoint.
Minum WASM size was increased a bit.
https://github.com/storj/storj/issues/5415
Change-Id: Ia5f9cadeb526541b2776a8973eb7d50133ad8636
Starting restore trash in the background allows the satellite to
continue to the next storagenode without needing to wait until
completion.
Of course, this means the satellite doesn't get feedback whether it
succeeds successfully or not. This means that the restore-trash needs to
be executed several times.
Change-Id: I62d43f6f2e4a07854f6d083a65badf897338083b
The collector tries deleting a piece over and over again, though
the piece does not exist on the storagenode's filesystem.
We need to delete the piece info from the expired db if the
targeted file does not exist.
This does not resolve the base problem of why the file
is deleted before the collector tries deleting it.
This change deletes the piece info from the expired db
if the file does not exist, since we're already trying
to delete that piece anyway.
Closes https://github.com/storj/storj/issues/4192
Change-Id: If659185ca14f1cb29fd3c4237374df6fcd535df8
* Allow configure initial piece scan
* Update tests to include new flag
* Update default config specification
* Rename configuration flag
* Rename variable and fix formatting
* Fix format
* Fix typo
Co-authored-by: Stefan Benten <mail@stefan-benten.de>
Co-authored-by: Clement Sam <clementsam75@gmail.com>
Co-authored-by: littleskunk <jens.heimbuerge@googlemail.com>
Currently TextMaxVerifyCount flakes in some tests, try increasing the
sleep time to ensure that things are slow enough to trigger the error
condition.
Also pass ctx to all the funcs so we can handle sleep better.
Change-Id: I605b6ea8b14a0a66d81a605ce3251f57a1669c00
This is a temporary precaution to avoid incorrectly auditing nodes for pieces that were deleted between database backups if we have to restore from a previous backup.
Here we send pieces to trash rather than directly deleting them from storage nodes so we can restore from trash after a db restoration.
Change-Id: Icd979d2a9a755e7428190c0129c9bc969649d544
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.
Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
Sometimes SNOs fail to properly configure or lose connection to their storage directory
which can result in DQ. This causes unnecessary repair and is unfortunate for all parties.
This change introduces the creation of a special file in the storage directory at runtime
containing the node ID. While the storage node runs, it periodically verifies that it can
find said file with the correct contents in the correct location. If not, the node will
shut down with an error message.
This change will solve the issue of nodes losing access to the storage directory, but it will not
solve the issue of nodes pointing to the wrong directory, as the identifying file is created each
time the node starts up. After this change has been the minimum version for a few releases, we will
remove the creation of the directory-identifying file from the storage node run command and add it
to the setup command.
Change-Id: Ib7b10e96ac07373219835e39239e93957e7667a4
In walkNamespaceWithPrefix log in case of "lstat" error, because this may indicate an underlying disk corruption.
SG-50
Change-Id: I867c3ffc47cfac325ae90658ec4780d213ff3e63
Currently uploads can cause a lot of IOPS, reduce this by introducing a
in-memory buffer on-top of the file.
Change-Id: I5f4e3e01c0a36258271d180b922107de447bcb59
Before the deleter would close its done channel once, so if additional
tests shared a storagenode, even if not in parallel, the later waits
would not work properly. This fixes that problem.
Change-Id: I7dcacf6699cef7c2c2948ba0f4369ef520601bf5
There was a race in the test code for piece deleter, which made it
possible to broadcast on the condition variable before anyone was
waiting. This change fixes that and has Wait take a context so it times
out with the context.
Change-Id: Ia4f77a7b7d2287d5ab1d7ba541caeb1ba036dba3
When we receive a piece deletion request, include the number of piece
IDs we couldn't add to the queue in the reponse
Change-Id: Ibebbe92ac50105bb5c74b18211ed38d468eb33f3
Each time we process a piece deletion on the storagenode, monitor how
long the item was in the queue and the size of the queue.
Change-Id: I23f1a44f8b9cecb901bdf4739d55c005ffed4bef
To improve delete performance, we want to process deletes asynchronously
once the message has been received from the satellite. This change makes
it so that storagenodes will send the delete request to a piece Deleter,
which will process a "best-effort" delete asynchronously and return a
success message to the satellite.
There is a configurable number of max delete workers and a max delete
queue size.
Change-Id: I016b68031f9065a9b09224f161b6783e18cf21e5
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
This test checks that we are actually walking over the pieces when
starting the cache, and that it is returning expected values.
A recent outage was partially caused by the fact that this cache was
accidentally reading itself (via the pieces store, which has the cache
embedded). This test ensures that does not happen, and checks that when
the cache's `Run` method is called, the space used values are read from
disk and accurately update the cache.
Change-Id: I9ec61c4299ed06c90f79b17de3ffdbbb06bc502e
instead of aborting on the first error, so that we can hit all
satellites and get the best numbers we can
Change-Id: I21d5163884940612d7d39eaf73a6fac07235cd9e
