During testing it's possible to get into a scenario where all nodes are
offline and list of requests is empty.
Change-Id: I271c0ca2c72009244df13e8bc1441fcd5f3da9e0
Currently ListV2 loaded the whole data into memory, even when all the
data wasn't being used, using up more memory than needed.
Change-Id: I5846d979344729b447c108a6cc9f4227229ec981
potential encryption overhead.
This is the same approach we have for validating remote segment size.
https://storjlabs.atlassian.net/browse/USR-619
Change-Id: I2597ee734313a3068fd986001680bbedbf1bed2a
size with BeginObject
Such solution will add one round trip to satellite during upload so for
now we are reverting this until we will have solution for this.
Change-Id: Ic2d826448ab7b0318cd6922df05deee9167cf2f0
BeginObject response
We want to control inline segment size and segment size on satellite
side. We need to return such information to uplink like with redundancy
scheme.
Change-Id: If04b0a45a2757a01c0cc046432c115f475e9323c
all permissions
Without read and list permissions BeginObjectDelete won't return error
if occurs. This was breaking Batch processing because there was
assumption that without error response will be always not nil.
https://storjlabs.atlassian.net/browse/SM-590
Change-Id: I0fc9539e429110a660eb28725b266d5e4771d198
uuid.UUID implements driver.Value so it can be directly used as a
scannable result.
Replace uses of dbutil.BytesToUUID with uuid.FromBytes.
Change-Id: I51a670185ceb3cc2199d5aa2b76bc3fc191ca8fe
Instead of providing the database from outside to testplanet create it
inside and then allow wrapping and modifying it. This is more convenient
to use.
Change-Id: I9b8f69e6e0a19ff984b4e2bfe927c9100c77bc6c
This implements a service for pointer verification. This makes the
slightly clearer, because it's not part of metainfo.
It also adds a peer identity cache which reduces database calls and peer
identity decoding.
Change-Id: I45da40460d579c6f5fd74c69bccea215157aafda
step 1 in https://review.dev.storj.io/c/storj/uplink/+/1236
Now the old libuplink uses the temporary DeleteBucketReturnDeleted and
DeleteObjectReturnDeleted methods. This way, in the next step, we will
be able to change the DeleteBucket and DeleteObject methods to return
the deleted bucket/object.
Change-Id: I2e638be1960bca6ce1456c92849fcdd6d93e5252
Initial change for checking bucket existence on satellite side for
requests like BeginObject and ListObjects. This is simple implementation
that is just checking bucket in DB but should be improved in future to
avoid DB calls as much as possible.
Part of https://storjlabs.atlassian.net/browse/USR-365
Change-Id: I9076acddc44d7dbfa7612a1c24a007de01621583
This adds a piece deletion handler that has debounce for failed dialing
and batching multiple jobs into a single request.
Change-Id: If64021bebb2faae7f3e6bdcceef705aed41e7d7b
To handle concurrent deletion requests we need to combine them into a
single request.
To implement this we introduces few concurrency ideas:
* Combiner, which takes a node id and a Job and handles combining
multiple requests to a single batch.
* Job, which represents deleting of multiple piece ids with a
notification mechanism to the caller.
* Queue, which provides communication from Combiner to Handler.
It can limit the number of requests per work queue.
* Handler, which takes an active Queue and processes it until it has
consumed all the jobs.
It can provide limits to handling concurrency.
Change-Id: I3299325534abad4bae66969ffa16c6ed95d5574f
Metainfo method validateAuth checks things like API key, user permission
and rate limit but at the end all errors were returned as
rpcstatus.Unauthenticated.
Old Metainfo is not touched to avoid backward compatibility issues.
Change-Id: I78eb276210fc50151da58a5c84e13ecd0961da29
New API has limited number of options to configure at the moment. We
should remove unused flags from Uplink CLI and add if needed in the
future.
Change-Id: Icf3f3dadd43cb61a3b408b02d0762aef34425dbf
uplinks
New libuplink is not storing encryption values in with bucket but old
uplinks are using those values for configuration. If bucket was created
with new libuplink we will send back satellite defaults.
Change-Id: Ie1bf3682847e07b302270b4c4bf1a7219f4bf011
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these requests as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
This change should handle issue we have in older uplinks with incorrect
order of storing pointers.
Change-Id: I86514c95df169e6fbc91b52e5117472cae70cb8b
we want to return back to the user as quick as possible but also keep
deleting remaining pieces on the storagenodes
Change-Id: I04e9e7a80b17a8c474c841cceae02bb21d2e796f
rationale: if GC kills the satellite, it would be nice to make
it through a repair checker sweep first
Change-Id: Id56171dc8e13940cfb6481e36a910bad077a01ed
Trace the calls to DeletePiecesService.DeletePieces method and add
metrics for having statistics about the rate that specific storage node
is dialed and duration time spent on dialing storage nodes.
These statistics will help us to find out if we should implement
connections queues to storage node for reducing the deletion time in cae
that we see that we're spending too much time dialing frequent storage
nodes.
Ticket: https://storjlabs.atlassian.net/browse/SM-85
Change-Id: I9601676c3a8ad96c73c93833145929e4817755e2
Fixes https://storjlabs.atlassian.net/browse/USER-240
- Adds UnsynchronizedPut method to metainfo service that overwrites any
existing pointer under the same path
- Uses UnsynchronizedPut in the metainfo endpoint for committing the
segments
Change-Id: Icb43f31ea33f14066ca9dfdcf226eb3079b90948
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
Add monkit metric for the rate-limit when the rate limit is hit
Logs warning with projectID
https://storjlabs.atlassian.net/browse/SM-165
Change-Id: I352dc40006021990d1bc66a999f62bbf8deb54db
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
