We want to eliminate usages of LoopSegmentEntry.Pieces, because it is
costing a lot of cpu time to look up node IDs with every piece of every
segment we read.
In this change, we are eliminating use of LoopSegmentEntry.Pieces in the
node tally observer (both the ranged loop and segments loop variants).
It is not necessary to have a fully resolved nodeID until it is time to
store totals in the database. We can use NodeAliases as the map key
instead, and resolve NodeIDs just before storing totals.
Refs: https://github.com/storj/storj/issues/5622
Change-Id: Iec12aa393072436d7c22cc5a4ae1b63966cbcc18
This change sends an event to segment for when a user is unfrozen.
It also moves freeze and warning event triggers from the autofreeze
chore to the account freeze service.
Change-Id: I5c0522b921b7baf52d6db5eb7ef841c08644a461
Only API peer needs access to order DB (and rollups cache) because it's
only place where we are creating orders for PUT and GET operations. For
other peers like auditor and repairer we can set noop implementation to
reduce number of dependencies needed for them.
Change-Id: Ic32d1879f0b97ffc4516f401898e31e95ae892e4
It was surprising that `satellite auditor` complained about SMTP mail settings, even if it's not supposed to sending any mail.
Looks like we can remove the mail service dependency, as it's not a hard requirement for overlay.Service.
Change-Id: I29a52eeff3f967ddb2d74a09458dc0ee2f051bd7
The tests were using global variables for keeping the mock state, which
was indexed by the satellite ID. However, the satellite ID-s are
deterministic and it's possible for two tests end up using the same
mocks.
Instead make the mock creation not depend on the satellite ID and
instead require it being configured via paymentsconfig.
This fixes TestAutoFreezeChore failure.
Change-Id: I531d3550a934fbb36cff2973be96fd43b7edc44a
This change adds a new chore that will check for failed invoices and
potentially freeze corresponding accounts.
It makes slight modifications to stripemock.go and invoices.go (adding
stripe CustomerID to the Invoice struct).
Issue: https://github.com/storj/storj-private/issues/140
Change-Id: I161f4037881222003bd231559c75f43360509894
We will be needing an infrequent chore to check which nodes are in the
reverify queue and synchronize that set with the 'contained' field in
the nodes db, since it is easily possible for them to get out of sync.
(We can't require that the reverification queue table be in the same
database as the nodes table, so maintaining consistency with SQL
transactions is out. Plus, even if they were in the same database, using
such SQL transactions to maintain consistency would be slow and
unwieldy.)
This commit adds the actual chore.
Refs: https://github.com/storj/storj/issues/5431
Change-Id: Id78b40bf69fae1ac39010e3b553315db8a1472bd
Users with a partner package plan should be unable to replace their
plan's coupon. This change enforces this behavior by rejecting coupon
application attempts from users that meet this criteria.
Change-Id: I6383d19f2c7fbd9e1a2826473b2f867ea8a8ea3e
This change causes the bucket's partner info to be used rather than the
user's when calculating project usage prices. This ensures that users
who own differently-partnered buckets will be charged correctly for
usage based on the specific bucket they are utilizing.
according to the bucket's partner.
Related to storj/storj-private#90
Change-Id: Ieeedfcc5451e254216918dcc9f096758be6a8961
implemented observer and partial, created new structures to keep mon
metrics remain in same way as in segment loop
Change-Id: I209c126096c84b94d4717332e56238266f6cd004
This change allows for overriding project usage prices for a specific
partner so that users who sign up with that partner do not need their
invoices to be manually adjusted.
Relates to storj/storj-private#90
Change-Id: Ia54a9cc7c2f8064922bbb15861f974e5dea82d5a
Add node tally ranged loop observer and partial.
Add node tally randed observer to range loop peer.
Add config flag to select which loop to use for node tally.
Update satellite core to use segement/ranged loop based on a flag.
Duplicate existing node tally test but using ranged loop.
Change-Id: I6786f1a16933463fab5f79601bf438203a7a5f9e
This change implements the ranged loop observer to replace the audit
chore that builds the audit queue.
The strategy employed by this change is to use a collector for each
segment range to build separate per-node segment reservoirs that are
then merge them during the join step.
In previous observer migrations, there were only a handful of tests so
the strategy was to duplicate them. In this package, there are dozens
of tests that utilize the chore. To reduce code churn and maintenance
burden until the chore is removed, this change introduces a helper that
runs tests under both the chore and observer, providing a pair of
functions that can be used to pause or run the queueing function.
https://github.com/storj/storj/issues/5232
Change-Id: I8bb4b4e55cf98b1aac9f26307e3a9a355cb3f506
The tests are forked from the chore tests with slight adaptations for
being run against the ranged loop. I also moved a benchmark for the
database from chore_test.go to db_test.go.
The pathcollector is reused as a rangedloop.Partial.
https://github.com/storj/storj/issues/5234
Change-Id: I56182031d133812a9f4d4a433c01b9150af39f31
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
Now that we are doing scalable piecewise reverifications, the code for
handling the old way of doing things (containment, pending audits,
reporting, testing) can now be removed.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ief1a75f423eff682e8f3d57804e343b3409a6631
Here we add a worker class comparable to audit.Worker, which will be
responsible for pulling items off of the reverification queue and
calling reverifier.ReverifyPiece on them.
Note that piecewise reverification audits (which this will control) are
not yet being done. That is, nothing is being added to the
reverification queue at this point.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I94e28830e27caa49f2c8bd4a2336533e187ab69c
The Reporter is responsible for processing results from auditing
operations, logging the results, disqualifying nodes that reached
the maximum reverification count, and passing the results on to
the reputation system.
In this commit, we extend the Reporter so that it knows how to process
the results of piecewise reverification audits.
We also change most reporter-related tests so that reverifications
happen as piecewise reverification audits, exercising the new code.
Note that piecewise reverification audits are not yet being done outside
of tests. In a later commit, we will switch from doing segmentwise
reverifications to piecewise reverifications, as part of the
audit-scaling effort.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I9438164ce1ea4d9a1790d18d0e1046a8eb04d8e9
NewContainment will replace Containment later in this commit chain, but
for now it is not yet being used.
NewContainment will allow a node to be contained for multiple pending
reverify jobs at a time. It is implemented by way of the reverify queue.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I126eda0b3dfc4710a88fe4a5f41780618ec19101
Adding a new worker comparable to Verifier, called Reverifier; as the
name suggests, it will be used for reverifications, whereas Verifier
will be used for verifications.
This allows distinct logging from the two classes, plus we can add some
configuration that is specific to the Reverifier.
There is a slight modification to GetNextJob that goes along with this.
This should have no impact on operational concerns.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: Ie60d2d833bc5db8660bb463dd93c764bb40fc49c
As part of the effort of splitting out the auditor workers to their own
process, we are transitioning the communication between the auditor
chore and the verification workers to a queue implemented in the
database, rather than the sequence of in-memory queues we used to use.
This logical database is safely partitionable from the rest of
satelliteDB.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I6cd31ac5265423271fbafe6127a86172c5cb53dc
Add a new chore to periodically insert nodes who are offline and
have not gotten an offline email in a certain amount of time into node
events
Change-Id: I658b385bb777b0240c98092946a93d65bee94abc
Create NodeEvents Chore on satellite core to read nodeevents DB and
notify node operators on node events. The chore sends notifications
grouped by email and event type: it selects the oldest entry in
nodeevents.DB and also any other event with the same email and event
type no matter how old it is. The oldest entry of a group must exist for
a minimum amount of time before that group can be selected, however.
This minimum amount of time is a configurable value:
--node-events.selection-wait-period. This wait period allows us to
combine events of the same time and same email address into a singular
email.
Change-Id: I8b444aa324d2dae265cc27d9e9e85faef79195d8
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
since amount of objects is growing and looping through all of them
starts taking lot of time, we are switching for SQL query to do it
in chunks of tallies per bucket. 2nd part of issue fix.
Closes https://github.com/storj/team-metainfo/issues/125
Change-Id: Ia26bcac0a7e2c6503df9ebbf4817a636841d3284
We want to send emails to SNOs. Node status changes go through the
overlay service, so it's a good place to add the mail service.
Add the mailservice.Service, satellite address, and satellite name to
overlay service. Also add feature flag --overlay.send-node-emails
Change-Id: I3bd2cb3bf22f9724954ce2374f8b651b902b3a24
In an effort to distribute load on the reputation database, the
reputation write cache scheduled nodes to be written at a time offset by
the local nodeID. The idea was that no two repair workers would have the
same nodeID, so they would not tend to write to the same row at the same
time.
Instead, since all satellite processes share the same satellite ID
(duh), this caused _all_ workers to try and write to the same row at the
same time _always_. This was not ideal.
This change uses a random number instead of the satellite ID. The random
number is sourced from the number of nanoseconds since the Unix epoch.
As long as workers are not started at the exact same nanosecond, they
ought to get well-distributed offsets.
Change-Id: I149bdaa6ca1ee6043cfedcf1489dd9d3e3c7a163
Currently we have a significant number of tallies that need to be
deleted together. Add a limit (by default 10k) to how many will
be deleted at the same time.
Change-Id: If530383f19b4d3bb83ed5fe956610a2e52f130a1
We want to remind unverified users to verify their emails:
once after 24 hours has passed and again after 5 days has passed.
Add mailservice.Service to satellite core because it is needed by the
chore for sending emails. To add the mailservice.Service to the core,
we create a helper function in satellite/peer.go to avoid duplicating
the code in both api.go and core.go. In addition to the chore, this
change adds methods to users.DB to get unverified users in need of
reminder.
Change-Id: I4e515bdf43f922788b4f965b2efb34fa32288bd1
This will apply an appropriate "subsystem" label to goroutines which are
part of the core, api, repairer, admin, or gc subsystems.
It will also label goroutines whose job it is to watch for slow shutdown
of lifecycle groups (there are a lot of these).
Finally, this will also label goroutines whose job it is to wait on the
toplevel errgroup of a subsystem.
Change-Id: I560b5fff4a0101300d6c9a67609c2d80d7424486
This sets the corresponding _numeric columns to be NOT NULL (it has been
verified manually that there are no more NULL _numeric values on any
known satellites, and it should be impossible with current code to get
new NULL values in the _numeric columns.
We can't drop the _gob columns immediately, as there will still be code
running that expects them, but once this version is deployed we can
finally drop them and be totally done with this crazy 5-step migration.
Change-Id: I518302528d972090d56b3eedc815656610ac8e73
All code on known satellites at this moment in time should know how to
populate and use the new numeric columns on the
stripecoinpayments_tx_conversion_rates and coinpayments_transactions
tables in the satellite db. However, there are still gob-encoded
big.Float values in the database from before these columns existed. To
get rid of those values, so that we can excise the gob-decoding code
from the relevant sections, however, we need something to read the gob
bytestrings and convert them to numeric values, a few at a time, until
they're all gone.
To accomplish that, this change adds two chores to be run in the
satellite core process- one for the coinpayments_transactions table, and
one for the stripecoinpayments_tx_conversion_rates table. They should
run relatively infrequently, so that we do not impose any undue load on
processing resources or the db.
Both of these chores work without using explicit sql transactions, but
should still be concurrent-safe, since they work by way of
compare-and-swap type operations.
If the satellite core process needs to be restarted, both of these
chores will start scanning for migrateable rows from the beginning of
the id space again. This is not ideal, but shouldn't be a problem (as
far as I can tell, there are only a few thousand rows at most in either
of these tables on any production satellite).
Change-Id: I733b7cd96760d506a1cf52735f598c6c3aa19735
In addition to upgrading the storj.io/common library, this change
moves off the TCPConnector in favor of the HybridConnector per
the deprecation warning.
Change-Id: I7e7e1e7568e8b95e4a99ad9caa158a799e68e1e3
The main motivation is to wrap the bucket DB and metainfo DB, so we
could check if a bucket is empty before applying geofencing config.
Change-Id: I8bac21555e01d51a663fb557bc1acfc8106bc2e1
