The test case wasn't testing all the combinations.
But, testing all 3 byte combinations would take too long,
instead test special values and +- 1 of them, with some
additional noise characters.
Change-Id: If53ff25863a1f27c534922bd399fbbbdfefda441
Move rpc test that uses testplanet into private/testplanet.
This ensures that rpc doesn't have the whole system as a dependency
making it easier to separate.
This unfortunately leaves pkg/rpc without specific tests, but
we would need to write new tests that only use the core packages.
Change-Id: I402ab3c2d50282af159c2ef3371d23b0997fef0a
This changes when we write the drpcheader. Rather than making it its own
write to the connection, it now prepends the drpc header to the first
write on the connection (typically the tls handshake). This results in
one less packet being sent at the beginning of each drpc connection.
For an operation like uploading a file from uplink, this results in many
packets being dropped: one when communicating with the satellite, and
one for each communication with the storage nodes.
Change-Id: I7644b46e90ffa7acea73ac56831396307352ed7a
After changing how we execute the storagenode-updater process we lost
timestamps in the log.
The fix is to start using zap logging.
The Windows Installer is changed to register the storagenode-updater
service in a way that the Windows Service Manager passes the
--log.output flag instead of the old --log.
The old --log flag is deprecated, but not removed. We will support it
for backward compatibility. This is required as the storagenode-updater
can auto-updated itself, but the Windows Service Manager of this old
installtion will continue passing the old --log flag when starting it.
Change-Id: I690dff27e01335e617aa314032ecbadc4ea8cbd5
Signed-off-by: Kaloyan Raev <kaloyan@storj.io>
long lived uplinks could just hold on to connections forever
if their client to the storagenode or satellite isn't closed.
this will prevent that from happening on the client. more
changes will be necessary to add appropriate prevention on
the servers.
Change-Id: Ib36d85e70cbafb315664ad7657bb70b936b3828c
planet.Start starts a testplanet system, whereas planet.Run starts a testplanet
and runs a test against it with each DB backend (cockroach compat).
Change-Id: I39c9da26d9619ee69a2b718d24ab00271f9e9bc2
* pkg/pg: Add new service function storage node
Add a new service function to the storage node piece store for deleting
pieces when satellites request them.
* storagenode/piecestore: Add endpoint to delete piece
Add a new endpoint to receive from trusted satellites to delete a piece.
* private/testplanet: Fix storagenode mock
Add to the storagenode mock the new endpoint method.
* proto.lock: Update it with the last protbuff changes
* storagenode/piecestore: Reuse test piece upload
Extract the repeated logic from several tests functions for uploading a
test piece to a test helper function.
* uplink/piecestore: Implement client side method
Implement the client side method of the new piecestore RPC function.
* storagenode/piecestore: Add test DeletePiece endpoint
Implement a test for the DeletePiece new endpoint method.
if your server is built to make drpc connections, clients can
still connect with grpc. thus, your responses to grpc clients
must still look the same, so we have to have all of our status
wrapping include codes for both the drpc and grpc servers to
return the right thing.
Change-Id: If99fa0e674dec2e20ddd372a827f1c01b4d305b2
these may not be optimal but they're probably better based on
our previous testing. we can tune better in the future now that
the groundwork is there.
Change-Id: Iafaee86d3181287c33eadf6b7eceb307dda566a6
We don't use reverse listing in any of our code, outside of tests, and
it is only exposed through libuplink in the
lib/uplink.(*Project).ListBuckets() API. We also don't know of any users
who might have a need for reverse listing through ListBuckets().
Since one of our prospective pointerdb backends can not support
backwards iteration, and because of the above considerations, we are
going to remove the reverse listing feature.
Change-Id: I8d2a1f33d01ee70b79918d584b8c671f57eef2a0
drpc will call Close on any transport we pass to it, but some
transports (like tls.Conn) will attempt to notify the remote
side of things. we don't want to do that, so pass a new
interface that just closes the underlying socket.
Change-Id: I53344d2747de21b3146abe4f82b8394bb8948cb5
Change signature of metainfo DeleteObject to get rid of an extra call to
kvmetainfo GetBucket method and eliminate one round trip to the
satellite when deleting objects.
grpc doesn't exit dials right away if the context dialer
returns an error. since that's the only spot where we were
enforcing dial timeouts, dials could just leak for an
unknown amount of time.
add a timeout above the grpc dial because that's the documented
way that grpc expected to be canceled.
Change-Id: Ic47ac61ce8a5f721510cc2c4584f63d43fe4f2d5
we don't know if an incoming connection is from drpc or grpc during
the migration time, so check both.
Change-Id: I2418dde8b651dcc4a23726057178465224a48103
* add signatures, fix process loop bug, move delete to on success
* added tests for signatures
* PR comment updates
* fixed setting reason by default.
* updates for PR comments
* added signed failure when verificationi fails
* moved to sign_test
* fix panic
* removed testplanet from test
* add overall failure percentage check and inactive time frame check before sending a response to sno
* update comment
* delete node from transfer queue if it has been inactive for too long
* fix linting error
* add test config value
* fix nil pointer
* add config value into testplanet
* add unit test for overall failure threshold
* move timeframe threshold to chore
* update protolock
* add chore test
* add per peiece failure count logic
* change config name from EndpointMaxFailures to MaxFailuresPerPiece
* address comments
* fix linting error
* add error handling for no row returned from progress table
* fix test for graceful exit chore on storagenode
* fix typo InActive -> Inactive
* improve readability for failure threshold calculation
* update config lock
* change error handling for GetProgress in graceful exit endpoint on the satellite side
* return proper rpc error in endpoint
* add check in chore test for checking finish timestamp and queue
keep a pool of connections open when dialing for drpc. this
makes it so that long lived clients (like lib/uplink's Project)
don't continue to use a bad connection forever. it also allows
for concurrent rpcs.
Change-Id: If649b286050e4f09c413fadc3e1ce88f5fc6e600
libuplink was incorrectly setting timeouts to 10 seconds still, but
should have been at least 10 minutes. the order sender was setting them
to 1 hour. we don't want timeouts in uplink-side logic as it establishes
a minimum rate on tcp streams.
instead of all of this, just use tcp keep alive. tcp keep alive packets are
sent every 15 seconds and if the peer stops responding the connection
dies. this is enabled by default with go. this will kill tcp connections
when they stop working.
Change-Id: I3d7ad49f71950b3eb43044eedf4b17993116045b
When code is compiled without -tags=drpc the statuses for drpc server
weren't handled, which meant an uplink using -tags=drpc didn't get the
correct status code.
* add exit-status command
* remove todo and fix format
* fix status display
* change startExit to exit progress
* fix linting error
* add successful column in exit progress
* fix test
* remove extra new line
* fix TYPOS
* format the percentage better
What:
Bring back partial nodeID to debug.trace-out
Why:
The information is useful for interpreting the trace file and was there up drpc. I just bring it back.
https://github.com/storj/storj/blob/v0.21.3/pkg/transport/transport.go#L76
Please describe the tests:
Test 1:
Test 2:
Please describe the performance impact:
No impact.
This change adds a trusted registry (via the source code) of node address to node id mappings (currently only for well known Satellites) to defeat MITM attacks to Satellites. It also extends the uplink UI such that when entering a satellite address by hand, a node id prefix can also be added to defeat MITM attacks with unknown satellites.
When running uplink setup, satellite addresses can now be of the form 12EayRS2V1k@us-central-1.tardigrade.io (not even using a full node id) to ensure that the peer contacted is the peer that was expected. When using a known satellite address, the known node ids are used if no override is provided.
we spawned a goroutine to wait on the context's done
channel sending the error afterward, but we forgot
to ensure the context was eventually done, so the
goroutine would be leaked until then.
instead, we can just do a select on two channels to
get the error rather than spawn a goroutine which
makes it impossible to leak a goroutine.
Change-Id: I2fdba206ae6ff7a3441b00708b86b36dfeece2b5
the net package does not make it easy to know if DialContext
failed because the context was done. it's important for some
of our tests that canceled contexts are detected as such, so
we accept the small race that's arguably correct (the context
must be canceled asynchronously) to ensure we always return
the context error if available.
Change-Id: I058064d5c666e5353b74fb5bd300bf7abe537ff5
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
it was possible, because we spawned Run before we did any calls
to Route, that the listenmux would send multiple connections to
the default listener. Fix that by ensuring we call Route before
we call Run.
Change-Id: Ie8fd754997975969a99fd2a3f8d3010c24cdc73d
It provides an abstraction around the rpc details so that one
can use dprc or gprc with the same code. It subsumes using the
protobuf package directly for client interfaces as well as
the pkg/transport package to perform dials.
Change-Id: I8f5688bd71be8b0c766f13029128a77e5d46320b
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
What: we move api keys out of the grpc connection-level metadata on the client side and into the request protobufs directly. the server side still supports both mechanisms for backwards compatibility.
Why: dRPC won't support connection-level metadata. the only thing we currently use connection-level metadata for is api keys. we need to move all information needed by a request into the request protobuf itself for drpc support. check out the .proto changes for the main details.
One fun side-fact: Did you know that protobuf fields 1-15 are special and only use one byte for both the field number and type? Additionally did you know we don't use field 15 anywhere yet? So the new request header will use field 15, and should use field 15 on all protobufs going forward.
Please describe the tests: all existing tests should pass
Please describe the performance impact: none
The fundamental problem is that both drpc and grpc servers
want to close the listener and they both want to ignore the
error from Accept after the listener is closed. There's no
way to do this in a race free way. Fortunately, the mux
hands out listeners that can be independently closed. That
means they can both do their own shutdown logic where they
ignore the error, and then after they're closed, the code
orchestrating the servers can close the listeners.
The final weird bit is that the server's Close method is
required to wait until the Run method has exited (or at
least enough for the listeners to definitely be closed)
because tests depend on that behavior, so we have to add
some channels/mutexes/onces to ensure that Run has exited
and that a new call can't start after Close is called.
Change-Id: I7c4ef293f7963f83138815f51824fd5b8d09ce15
this is a trivial operation for storagenode/console, as it doesn't
really need or use kademlia in the first place.
What:
Removes kademlia from storagenode/console
Why:
We are in the process of getting rid of kademlia, and this is one place where it's particularly easy.
Please describe the tests:
Existing tests exercise storagenode/console behavior; if they continue to work, everything here should be tested satisfactorily.
Please describe the performance impact:
None
