The redis key associated to bandwidth usage depended on the current month.
This change makes it depends also on the day, so that we update bandwidth usage
daily to take into account changes associated to expired but not used allocated bandwidth.
It also add a test to to check that the allocated but not settled bandwidth is not counted after 2 days.
Change-Id: Iee9dbe3517cc3b9825438360b276a07a43dfbc64
Migration step for adding a 'egress_dead' column to the project_bandwidth_daily_rollups.
It will be used to track bandwidth allocation that won't be consumned
as the corresponding order has already been processed and has a settled
bandwidth amount lower than the order limit (allocated bandwidth).
Change-Id: Ic07592e69292ae2076e69f6038bb0e0fae79b271
Full prefix: web/satellite, satellite/{console, analytics, satellitedb}
- checkbox added to register view - business tab
- user being saved with new column
- add sales contact choice to Segment calls
- ui fix added to employee count dropdown
Change-Id: Ib976872463b88874ea9714db635d58c79cdbe3a1
We are not using this table so make no sense to put data there.
This change removes only code that is using this table. Before next
release we need to drop table with migration step.
Change-Id: I80f400aa778c717e70324bd00da502b7032c9d9f
Until now, whenever audits were recorded we would try to delete
the node from containment just in case it exists. Since we now
want to treat segment repair downloads as audits, this would
erroneously remove nodes from containment, as repair does not go
through a Reverify step. With this changeset, (Batch)UpdateStats
will not remove nodes from containment. The Reverify method will
remove all necessary nodes from containment.
Change-Id: Iabc9496293076dccba32ddfa028e92580b26167f
Because of recent changes to how coupons for the free tier are handled
(see commit 4c0817bcfb), we no longer want all these $10
non-expiring coupons. After coupons are applied during invoice
generation, if a customer does not have any valid (non expired, non
consumed) coupons, a new promotional coupon is applied.
We could just wait for users to consume all $10 of the non-expiring
coupons, and the new promotional coupon would be applied for the
following billing cycle, but this gets tricky, because if in the final
month, the user is billed for $1 of usage, but only $0.5 of the $10
non-expiring coupon is remaining, the user will be charged for the
remaining $0.5. With the new promotional coupon of $1.65, expiring every
month, this would not be an issue.
So long story short, this commit migrates all non-expiring coupons to
expire within 2 billing periods (all existing non-expiring coupons in
prod were created in early April or later). That way, there is still
enough value in the $10 coupon that we don't have to worry about
customers exceeding it, and the coupons will expire. Then we'll
immediately apply the $1.65 coupon for the next month! And then
hopefully this unfortunate situation will come to a pleasant end.
Change-Id: I8a593948d8876c41a71d886b9a95d4e2c802b4f3
Replace GetProjectAllocatedBandwidth by GetProjectBandwidth which calculates
used bandwidth from allocated and settled bandwidth recorded in the
project_bandwidth_daily_rollups table.
For each day in the month, if the allocated bandwidth is expired, it uses the
settled bandwidth for computing used bandwidth.
Change-Id: Ife723c6d5275338f470619631acb25930d39ac3c
project_bandwidth_daily_rollups table
We want to calculate used bandwidth better so we need to calculate it
from allocated and settled bandwidth. To do this we need first populate
this new table.
https://storjlabs.atlassian.net/browse/PG-56
Change-Id: I308b737bf08ee48ce4e46a3605697ab2095f7257
Improve UpdateCheckIn on a contended row:
name old time/op new time/op delta
UpdateCheckInContended-100x-32 2.29s ±55% 0.17s ±61% -92.45% (p=0.008 n=5+5)
Change-Id: I053ab9f1cff136c306e5fb57f5e355cdc0269a8c
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Initially metabase was developed separately and it was useful to have a
separate environment flag for tests, however, it's more convenient to
use the same as rest of the testsuite.
Change-Id: Ia4d79be27ce5911cbae68d57cdf0b30f63459444
Currently we were duplicating code for AS OF SYSTEM TIME in several
places. This replaces the code with using a method on
dbutil.Implementation.
As a consequence it's more useful to use a shorter name for
implementation - 'impl' should be sufficiently clear in the context.
Similarly, using AsOfSystemInterval and AsOfSystemTime to distinguish
between the two modes is useful and slightly shorter without causing
confusion.
Change-Id: Idefe55528efa758b6176591017b6572a8d443e3d
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
multiregion satellites have complex database connection strings
largely due to using a different backend for the repair queue than
cockroach.
billing stuff didn't work right with this.
Change-Id: Ie8759a8c47e71347c3a190abfc9d53945d7b8855
When audits are being recorded, we automatically add some SQL to remove
the node from the pending audits table in case it exists. They are
removed from pending audits even if the node was offline for the audit.
This is not the correct behavior.
Add statement to record audit results in reverify tests to ensure no
more false positives.
Change-Id: I186ae68bc5e7962ef6c5defbebc1d95e63596a17
The DBs of our production satellites have some indexes that we didn't
have in the migrations because at that time we weren't able to add them
because our migration test was not able to deal with Cockroach indexes
with the STORING clause.
We have recently modified the storj.io/private/dbutil/pgutil package to
support the CRDB STRORING clause, so we are adding the missing indexes
to our migrations for being able to have them if we have to recover a DB
from scratch or we deploy a new DB satellite.
Change-Id: I686ff84e5b4c02d9615f50fa531261363affefb8
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
The previously configured never-expiring coupon does not refill every
month. Eventually, even though it never expires, it will run out. This
commit makes several small changes to address this issue for the free
tier:
* Change the config for the promotional coupon to be $1.65 for 1 month
(the change from $10 to $1.65 is due to our recent pricing changes)
* Update PopulatePromotionalCoupons (PPC for brevity) to add promotional
coupons to users with expired and consumed coupons (all users with a
project and no active coupons should get a new coupon when PPC is called)
* Call PPC at the end of the `create-invoice-coupons` stage of invoice
generation - after current coupons are processed and expired/exhausted.
* Remove legacy admin functionality for PPC from satellite/console - we
do not currently use it, but if we did, it should be in satellite/admin
instead.
Change-Id: I77727b97bef972df32ebb23cdc05055827076e2a
For business accounts we need to track the sales contact.
It will be a question to business accounts during onboarding.
Change-Id: I8d101ce1b52091478dfb0ddd875e1cc717d765d3
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
When nodes check in for the very first time, if the satellite can't ping
them back, they are inserted into the nodes table with
last_contact_success of '0001-01-01 00:00:00+00'. If the stray nodes
chore runs before the node can fix their problem, they are DQd.
Solution: when DQing stray nodes, dont DQ where last_contact_success =
'0001-01-01 00:00:00+00'::timestamptz
Change-Id: I477a02d5ef85b2c930ed6b7d99a4d1995169bca8
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
The new default promotional coupon is $10/month, and doesn't expire.
This change also migrates the coupon.duration column over to the new
coupon.billing_periods, and switches to rely completely on
billing_periods.
Change-Id: Ic3341e9fa4040449bab5e66ca4ee2640b095cf3d
Currently we can have an error about duplicated entry while inserting into value_attributions table. This change is changing simple insert into insert that is doing nothing on conflict.
Change-Id: I3efd8dc0b63115e8e2ed8f4196ccf969ee942295
* Add a nullable billing_periods column in the coupons table
* Add nullable billing_periods column to the currently unused
coupon_codes table
* Drop the duration column from the coupon_codes table
* Replace duration config type so that the default promotional coupon
can be configured to never expire
Zero downtime migration plan:
* Add billing_periods column to coupons and coupon_codes tables (this change)
* After one release, remove all references to the old duration column,
replacing with references to billing_periods. At this point, we can also
change the defult promotional coupon to never expire and migrate over
values from the old duration column.
* After another release, drop the duration column.
Change-Id: I374e8dc9fab9f81b4a5bc681771955662d4c007a
instead of only generating invoices for nodes that had some
activity, we generate it for every node so that we can find
and pay terminal nodes that did not meet thresholds before
we recognized them as terminal.
Change-Id: Ibb3433e1b35f1ddcfbe292c034238c9fa1b66c44
This change introduces a new config flag,
--overlay.audit-history.offline-suspension-enabled,
to toggle suspending nodes for offline audits.
If the flag is set to true, nodes will be suspended if they meet the
requirements.
If the flag is false, nodes will not be suspended. If they are already
suspended and/or under review, these will be cleared.
Change-Id: Ibeba759c42d6e504f6b7598120d4fd4dab85ca74
Previously we would select a limited number of nodes for DQ in a
CTE and run the update on that set in a single transaction. This
could lead to locking on the table, so instead we select and update
in separate transactions.
Change-Id: I1e802c0845e829eeadcee4fa382f58462515fdb1
This is one step for implementing the free tier:
* Change the default project limit from 10 to 3
* Move storage and bandwidth project usage limits from the metainfo
package to the console package (otherwise there is a cyclical
dependency, and metainfo doesn't use these values anyway)
* Change the default storage usage limit per project from 500gb to 50gb
* Change the default bandwidth usage limit per project from 500gb to 50gb
* Migrate the database so that old users and projects continue to have
the old defaults (10 projects/500gb usage)
Change-Id: Ice9ee6a738bc6410da18c336c672d3fcd0cab1b9
We would like to log Node IDs and last contact successes of nodes DQd
in this manner. We would also like to avoid returning an unbounded list
of items from the db. Therefore we change the query to select a limited
number of nodes that meet the DQ conditions and iterate until 0 rows are
returned. Each column of the query is already indexed.
Change-Id: Iaec2d9b56e7202b7c2028ba21750d40c8dd506ee
The coupon_codes table will allow for administrators to create new promo
codes associated with coupon information (amount, duration, etc...).
A user will be able to enter a promo code (aka coupon code) in order to
apply a new coupon to their account. The coupon in the coupons table is
linked to the template defined in the coupon_codes table.
Change-Id: I50e49fa92afbc6aa9d01d8a895c069efb59e472b
Migration step 148 will cause errors because we missed some
references to the columns being dropped. Removing the step
altogether causes problems with backwards compatibility tests
because the change already exists in the latest release tag.
To circumvent, we change v148 to an empty migration.
Add methods FindTable and RemoveColumn in private/dbutil/dbschema
Change-Id: Ia527e95b88a88c5dc82800928ce6f8cfb879e334
cockroach is having problems with huge transactions and
having them complete before timeouts or whatever, so
do smaller transactions.
because we can have partial recording of payments which
are not unique, we have to do a thing where we read and
check if it already exists before writing. this is not
concurrency safe.
Change-Id: Ia7d59499a43ce6d70cb2a23754edbdd1b643ef1a
