Several tests using `(*ECRepairer).Get()` have begun to exhibit flaky
results. The tests are expecting to see failures in certain cases, but
the failures are not present. It appears that the cause of this is that,
sometimes, the fastest good nodes are able to satisfy the repairer
(providing RequiredCount pieces) before the repairer is able to identify
the problem scenario we have laid out.
In this commit, we add an argument to `(*ECRepairer).Get()` which
specifies how many failure results are expected. In normal/production
conditions, this parameter will be 0, meaning Get need not wait for
any errors and should only report those that arrived while waiting for
RequiredCount pieces (the existing behavior). But in these tests, we can
request that Get() wait for enough results to see the errors we are
expecting.
Refs: https://github.com/storj/storj/issues/5593
Change-Id: I2920edb6b5a344491786aab794d1be6372c07cf8
The Reporter is responsible for processing results from auditing
operations, logging the results, disqualifying nodes that reached
the maximum reverification count, and passing the results on to
the reputation system.
In this commit, we extend the Reporter so that it knows how to process
the results of piecewise reverification audits.
We also change most reporter-related tests so that reverifications
happen as piecewise reverification audits, exercising the new code.
Note that piecewise reverification audits are not yet being done outside
of tests. In a later commit, we will switch from doing segmentwise
reverifications to piecewise reverifications, as part of the
audit-scaling effort.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I9438164ce1ea4d9a1790d18d0e1046a8eb04d8e9
Reputation updates during repair currently consumes a lot of database
resources. Sometimes increasing the rate of repair is more important
than auditing a node based on whether they have or don't have the
correct piece during repair. This is the job of the audit service.
This commit is to implement an intermediate solution from this issue: https://github.com/storj/storj/issues/5089
This commit does not address the more in-depth fix discussed here: https://github.com/storj/storj/issues/4939
Change-Id: I4163b18d78a96fadf5265789fd73c8aa8def0e9f
We have an alert on `repair_too_many_nodes_failed` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the repair framework to act in that way.
Instead, in this change, we change the way that
`repair_too_many_nodes_failed` works. When a repair fails, we collect
piece fetch errors by type and determine from them whether it looks like
we are having network problems (most errors are connection failures,
possibly also some successful connections which subsequently time out)
or whether something else has happened.
We will now only emit `repair_too_many_nodes_failed` when the outcome
does not look like a network failure. In the network failure case, we
will instead emit `repair_suspected_network_problem`.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: I49df98da5df9c606b95ad08a2bdfec8092fba926
This structure is entirely unused within the audit module, and is only
used by repair code. Accordingly, this change moves the structure from
audit code to repair code.
Also, we take the opportunity here to rename the structure to something
less generic.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: If85b37e08620cda1fde2afe98206293e02b5c36e
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
The "satellite fetch-pieces" command allows a satellite operator to
fetch as many pieces of a segment as possible, along with their
original order limits and hashes as provided by the storage nodes. The
fetched pieces and associated info will be stored on in a specified
folder as they are, rather than being RS-decoded or decrypted.
It is hoped that this will allow easier debugging of certain one-off
problems we've observed in the wild.
Change-Id: I42ae0e9ef0023538e42473a9be5a2460a3ac0f3a
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
If satellite can't find enough nodes to successfully download a segment,
it probably is not the fault of storage nodes.
Change-Id: I681f66056df0bb940da9edb3a7dbb3658c0a56cb
work
Since we have changed the repair worker to also mark a node as audit
failure if they return a not found error, we should ignore expired
segments when possible
Change-Id: Ie6a677e1d7b234e93965c736d05950440236653c
Update repair tests to check if audit score increases for nodes
that successfully send pieces during successfull and failed repairs.
Change-Id: Ie6abbde6155ab4697d209366c9fa497e731756e9
When we can't complete an audit or repair, we need more information about
what happened during each individual share/piece download.
In audit, add the number of offline, unknown, contained, failed nodes to
the error log. In repair, combine the errors from each download and add
them to the error log.
Change-Id: Ic5d2a0f3f291f26cb82662bfb37355dd2b5c89ba
This change adds a NOT NULL constraint to the created_at column in the segment table.
All occurrences of CreatedAt as a pointer are changed to non pointer version (metabase, segment loop, etc)
Change-Id: I3efd476ebd1edd3327b69c9223d9edc800e1cc52
This change adds dedicated methods on metabase.Pieces to be able to add, remove pieces and also to check duplicates.
Change-Id: I21aaeff40c017c2ebe1cc85a864ae546754769cc
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
At some point we might try to change original segment RS values and set Pieces according to the new values. This change adds add NewRedundancy parameter for UpdateSegmentPieces method to give ability to do that. As a part of change NewPieces are validated against NewRedundancy.
Change-Id: I8ea531c9060b5cd283d3bf4f6e4c320099dd5576
It's impossible to time correctly this check. The segment may expire
just at the time we upload the repaired pieces to new storage nodes.
They will reject this as expired and the repair will fail.
Also, we penalize storage nodes with audit failure only if they fail
piece hash verification, i.e. return incorrect data, but only if they
have already deleted the piece.
So, it would be best if the repair service does not care about object
expiration at all. This is a responsibility of another service.
Removing this check will also simplify how we migrate this code
correctly to the metabase.
Change-Id: I09f7b372ae2602daee919a8a73cd0475fb263cd2
Rather than having a single repair override value, we will now support
repair override values based on a particular segment's RS scheme.
The new format for RS override values is
"k/o/n-override,k/o/n-override..."
Change-Id: Ieb422638446ef3a9357d59b2d279ee941367604d
Firstly, this changes the repair functionality to return Canceled errors
when a repair is canceled during the Get phase. Previously, because we
do not track individual errors per piece, this would just show up as a
failure to download enough pieces to repair the segment, which would
cause the segment to be added to the IrreparableDB, which is entirely
unhelpful.
Then, ignore Canceled errors in the return value of the repair worker.
Apparently, when the worker returns an error, that makes Cobra exit the
program with a nonzero exit code, which causes some piece of our
deployment automation to freak out and page people. And when we ask the
repair worker to shut down, "canceled" errors are what we _expect_, not
an error case.
Change-Id: Ia3eb1c60a8d6ec5d09e7cef55dea523be28e8435
The current monkit reporting for "remote_segments_lost" is not usable for
triggering alerts, as it has reported no data. To allow alerting, two new
metrics "checker_segments_below_min_req" and "repairer_segments_below_min_req"
will increment by zero on each segment unless it is below the minimum
required piece count. The two metrics report what is found by the checker
and the repairer respectively.
Change-Id: I98a68bb189eaf68a833d25cf5db9e68df535b9d7
With the new overlay.AuditOutcome type for offline audits, the
IsUp field is redundant. If AuditOutcome != AuditOffline, then
the node is online.
In addition to removing the field itself, other changes needed
to be made regarding the relationship between 'uptime' and 'audits'.
Previously, uptime and audit outcome were completely separated. For
example, it was possible to update a node's stats to give it a
successful/failed/unknown audit while simultaneously indicating that
the node was offline by setting IsUp to false. This is no longer possible
under this changeset. Some test which did this have been changed slightly
in order to pass.
Also add new benchmarks for UpdateStats and BatchUpdateStats with different
audit outcomes.
Change-Id: I998892d615850b1f138dc62f9b050f720ea0926b
This change removes the overlay function FindStorageNodesForRepair,
which skips using the node selection cache and hits the database
directly. Otherwise, it is functionally identical to
FindStorageNodesForUpload, which checks the node selection cache first.
When selecting nodes for PUT_REPAIRs, we now call
FindStorageNodesForUpload instead of FindStorageNodesForRepair to reduce
database load.
Change-Id: If34e109695b2ed2b8fb6759115bf769a3459684e
It feels weird having a repairer configuration part of order services.
Let's have a single source of truth for it.
Change-Id: I24f7c897aec80f3293f8af24876cbb6733d85a0b
Inside CreateGetRepairOrderLimits we pass in a list of healthy pieces,
but when we query node info from this list we apply the "reliable" filter
again. We sometimes end up with nodes which at first were healthy, but then
became unhealthy, and thus can be repaired, but we do not update the 'unhealthyPieces'
list with these nodes.
This causes an error, 'piece to add already exists', as we fail to remove these
pieces from the pointer before replacing them with repaired pieces.
Change-Id: I6e2445f342ac117ded30351fa7e5e523c9ec26bd
