We have lots of direct DB requests to get API keys. It should be handled
by cache but default value is very low at the moment.
Fixes https://github.com/storj/storj/issues/5665
Change-Id: I214ebebd6e397cacff80b2f36dc4a2eea388f93d
This test involves a satellite with dev defaults (DistinctIP=no) being
upgraded past commit 2522ff09b6, which
means we need to run the dev-defaults-satellite-upgrade migration SQL
to avoid getting DistinctIP=yes behavior (which breaks the tests).
Change-Id: I29fb596d1ffa568dad635d98cfe9abacd3aaa48f
Only API peer needs access to order DB (and rollups cache) because it's
only place where we are creating orders for PUT and GET operations. For
other peers like auditor and repairer we can set noop implementation to
reduce number of dependencies needed for them.
Change-Id: Ic32d1879f0b97ffc4516f401898e31e95ae892e4
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Implements logic for satellite command to repair a single segment.
Segment will be repaired even if it's healthy. This is not checked
during this process. As a part of repair command will download whole
segment into memory and will try to reupload segment to number of new
nodes that equal to existing number of pieces. After successful
upload new pieces will completely replace existing pieces.
Command:
satellite repair-segment <streamid> <position>
https://github.com/storj/storj/issues/5254
Change-Id: I8e329718ecf8e457dbee3434e1c68951699007d9
New flag 'MultipleVersions' was not correctly passed from metainfo
configuration to metabase configuration. Because configuration was
set correctly for unit tests we didn't catch it and issue was found
while testing on QA satellite.
This change reduce number of places where new metabase flags needs
to be propagated from metainfo configuration to avoid problems with
setting new flags in the future.
Fixes https://github.com/storj/storj/issues/5274
Change-Id: I74bc122649febefd87f665be2fba628f6bfd9044
This patch addresses the following issues:
1. Running full migration in cockroachdb is quite slow. We already have an approach for unit tests to start from the latest snapshot. This patch makes it possible to use it for integrations tests.
2. Migration requires executing a separated command which makes it hard to run application in containerized test environments (like storj-up) or from IDE. This patch introduces a hidden flag to run migration.
3. Test user creation is painful. We do it with calling GraphQL + admin API. Providing an option with testuser makes the integration tests significant more simple (especially as the projectID -> access grant can be predictable)
Change-Id: I61010728727b490ea6aac32620f2da0484966727
Add an extra parameter to the pay-invoices command that can be used to restrict which invoices will have a payment attempted in stripe. The parameter should be of the form MM/DD/YYY and any invoices created on or after the date will have token balances applied and be processed for payment according to stripe subscriptions settings.
Change-Id: I5da5070d3ac97f45c05c02f2849254bdc44413c3
This change introduces the generate-invoices satellite billing
command whose functionality is equivalent to running
apply-free-coupons, prepare-invoice-records,
create-project-invoice-items, and create-invoices in order.
Invoice finalization must still be performed separately.
Change-Id: Ia3d80b95eef1f2776c38bd730ed731e42ec4c35e
Rather than using Invoice Items to account for storjscan token payments, credit notes will be used and applied to the users finalized invoice. This credit note will reduce the amount due of the users invoice based on the amount of storj token balance the user has on the satellite. Applying credit notes to a finalized invoice also requires that the invoice not be automatically paid when finalized. Therefore, a new command (pay-invoices) was added to initiate payment for users invoices.
Change-Id: Ie539375a10e842e3cb64bf0140834bbab0774f54
We would like to have separate process/command to collect bloom
filters from source different than production DBs. Such process will
use segment loop to build bloom filters for all storage nodes and
will send it to Storj bucket. This change is extending satellite binary
with appropriete command.
New GC service for collecting bloom filter will be a subsequent
change.
Updates https://github.com/storj/team-metainfo/issues/120
Change-Id: Ibc03e119c340919cf468fc1f5a4f3d187bb3a5a1
This change adds project ID and bucket name columns to the generated
partner attribution report. Attribution values are now summed based on
their project ID and bucket name in addition to their user agent.
Additionally, the command to generate the attribution report has been
modified to optionally include only certain user agents.
Change-Id: I61a1d854379134f26b31467d9e83a787beb451dd
Implement a buffer for inserting repair items into the queue in a batch.
Part of https://github.com/storj/storj/issues/4727
Change-Id: I718472b2f2b1f4993c3d6f15c44923776407155a
We would like to disable in production those parts of code
which are now mixed with new server-side copy logic.
Change-Id: Iff50682bc9545207330f58dd19b5eee53d404d7f
Currently the metainfo/metabase DB connections are missing the proper
application_name in order to differentiate and filter queries on the DB
side for analytics.
Without it, it is very time-consuming to correlate processes and their load.
This change adds the "check" on DB connection init and passes the fallbacks
in all places to catch connection strings, that do not set it.
Change-Id: Iea5cea8658bc63778ff89038e5c1c352bf482cfd
The "satellite fetch-pieces" command allows a satellite operator to
fetch as many pieces of a segment as possible, along with their
original order limits and hashes as provided by the storage nodes. The
fetched pieces and associated info will be stored on in a specified
folder as they are, rather than being RS-decoded or decrypted.
It is hoped that this will allow easier debugging of certain one-off
problems we've observed in the wild.
Change-Id: I42ae0e9ef0023538e42473a9be5a2460a3ac0f3a
Usage: from a host for the affected satellite, issue this command
and supply the number of segments that have been permanently lost. For
example, to indicate 2 segments permanently lost:
satellite register-lost-segments 2
If the unthinkable happens and this is necessary to use, it is presumed
that we will also remove the non-recoverable segments from the metainfo
db, so they will not continue to appear as 'temporarily unavailable' to
the repair checker.
The influxQL query for this will probably look something like:
SELECT sum(total) AS "sum_total"
FROM "v3_stats_new"."autogen"."lost-segments"
WHERE time > :dashboardTime: AND "scope" = 'segment-durability'
GROUP BY time(:interval:), "application", "instance"
FILL(null)
Or use the Flux language in order to get the benefit of the
cumulativeSum function:
from(bucket: "v3_stats_new/autogen")
|> range(start: dashboardTime)
|> filter(fn: (r) => r._measurement == "lost-segments"
and r.scope == "segment-durability"
and r._field == "total")
|> group(columns: ["application", "instance"])
|> cumulativeSum()
Change-Id: I73d364937705aa815af7520ab79c00bc2aea09f6
Multipart upload limits added. Last part has no size limit.
Max number of parts: 10000, min part size: 5 MiB
Change-Id: Ic2262ce25f989b34d92f662bde720d4c4d0dc93d
Removes database tables and functionality related to our custom
coupon implementation because it has been superseded by the Stripe
coupon and promo code system. Requires implementations of the
payments Invoices interface to return coupon usages along with
invoices.
Change-Id: Iac52d2ff64afca8cc4dbb2d1f20e6ad4b39ddfde
Now that the command has been run on all production satellites
(US1, AP1, EU1), we should not need it again.
Change-Id: I25a4ffb03a7172445d90a04ec539be36c4eb2c8e
This command is intended to be run as part of invoice generation - it
iterates over Stripe customers, and applies the free tier coupon to any
customer who doesn't already have a coupon.
This way, we can ensure that all customers have at least the free tier
coupon before and after invoice generation, in case a different coupon
has expired.
Change-Id: I33a4aff9174049f9e051de53ef65298ca65ed688
We have implemented the paid tier, but it currently only handles new
users entering paid tier. It does not convert users who have already
added a credit card previously. We still want to convert these users'
project limits. This billing command can be run once to convert all old
customers with a credti card. Afterwards, we should be able to safely
remove it.
Change-Id: Ia496580b8e72ef436375b74f590fe57cca704fa8
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
Currently the interface is not useful. When we need to vary the
implementation for testing purposes we can introduce a local interface
for the service/chore that needs it, rather than using the large api.
Unfortunately, this requires adding a cleanup callback for tests, there
might be a better solution to this problem.
Change-Id: I079fe4dbe297b0ae08c10081a1cea4dfbc277682
Use the 'AS OF SYSTEM TIME' Cockroach DB clause for the Graceful Exit
(a.k.a GE) queries that count the delete the GE queue items of nodes
which have already exited the network.
Split the subquery used for deleting all the transfer queue items of
nodes which has exited when CRDB is used and batch the queries because
CRDB struggles when executing in a single query unlike Postgres.
The new test which has been added to this commit to verify the CRDB
batch logic for deleting all the transfer queue items of the exited
nodes has raised that the Enqueue method has to run in baches when CRDB
is used otherwise CRDB has return the error "driver: bad connection"
when a big a amount of items are passed to be enqueued. This error
didn't happen with the current test implementation it was with an
initial one that it was creating a big amount of exited nodes and
transfer queue items for those nodes.
Change-Id: I6a099cdbc515a240596bc93141fea3182c2e50a9
multiregion satellites have complex database connection strings
largely due to using a different backend for the repair queue than
cockroach.
billing stuff didn't work right with this.
Change-Id: Ie8759a8c47e71347c3a190abfc9d53945d7b8855
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
cache is really common variable and type name and we have already used
the package name alias in multiple places.
Change-Id: I6435785b7549b541d533de59ec94557b9bd11e04
Rename the functions that are prefixed with 'New' which connect with
Redis by 'Open' to make clear that they perform network operations.
Change-Id: I1351e89a642e8e2c2586626646315ad0fb2c6242
Update the Redis dependency to use the last major production version.
The last version accepts a context parameter in all the network methods
so it allows us to pass it through them.
Change-Id: I34121b2ec3c2728602115c724933ad24c9e6e4fd
