This change has two purposes. First is to avoid DB call in case
source and destination bucket are the same.
Second is to return bucket not found error in correct order. If
source and destination bucket are different we will first check
source and later destination. Currently we will get first error
about not existing destination bucket.
Because of this change we stop putting bucket placement
into satellite stream id but its not needed as we don't use
this value with finish move/copy object methods.
Change-Id: I0f7b3ba604d53c722e8fa4d7a37843a69d02bebd
So far we assumes that metadata key/nonce cannot be empty at all
but at some point we adjusted code to accept empty metadata/key/nonce
to save DB space.
This change is adjusting how we are processing nonce while
FinishMoveObject/FinishCopyObject. We can use storj.Nonce directly
which makes code cleaner. It's also fixing issue in FinishMoveObject
where we didn't convert nonce correctly to []byte.
Part of change is disabling validation for key and nonce until
uplink will be adjusted. We need change uplink to send always
both key and nonce or non of them. Validation will be restored
as soon as change for uplink will be merged.
https://github.com/storj/storj/issues/4646
Change-Id: Ia1772bc430ae591f54c6a9ae0308a4968aa30bed
Add uplink-php and nextcloud as user agents. These sending of these
user agents was added to recent releases of these clients.
Change-Id: Ia2732ade1d9e5cf8d4e41fe246faec3feaa58c25
Uplink have some types aliased from storj/common repo. It's like
that for easier type replacement if we decide to use custom type
instead of aliasing. Because in storj/storj we are not using aliases
it's impossible to do refactoring on uplink side. This change is
cleaning up this situation.
Change-Id: I20c8e31b9a821983483af1c67b2e7bb91397fd9d
Chronograph statistics indicate that much of our Gateway-MT traffic may
originate from and also is metriced as rclone traffic. This makes it
difficult to understand what our users are doing. This solution makes
it clear what products are actually being used, likely without
increasing the cardinality of our metrics by more than one.
Change-Id: I5d5e2af3715fa0864f69f1145fd78caf7e4a4224
For server-side copy we adjusted one method DeleteObjectExactVersion.
Other deletion methods won't be used directly in code at the moment.
We will adjust other methods later or decide if we will need them at
all.
To handle deletion of objects with copies or just copies correctly we
need to use DeleteObjectExactVersion method in two places while:
* removing object before upload
* explicit object deletion
This change is also changing DeleteObjectExactVersion method to
delete pending objects because we need this functionality to
delete object before new upload.
https://github.com/storj/storj/issues/4481
Change-Id: Ieff5cc95732bb70ed8cc0ecdd62e03c929857c02
Copy object functionality should support setting new metadata for
copy. This change is adjusting FinishCopyObject method to set new
metadata when OverrideMetadata field is set to true.
Fixes https://github.com/storj/storj/issues/4483
Change-Id: Ica37cb57e8edae301cdc483fbda4f3ddba5d2702
Updates metadata and metainfo to return object metadata with
FinishCopyObject request.
https://github.com/storj/storj/issues/4474
Change-Id: I32cba5c20a943272e9b5964df1b3d6463ad212dc
We would like to disable in production those parts of code
which are now mixed with new server-side copy logic.
Change-Id: Iff50682bc9545207330f58dd19b5eee53d404d7f
Tests refactoring to reuse testplanet instance between some
of tests. This should decrease resources needed to run those
tests.
Change-Id: I98f3041ec23085d3903b19acd339904973319ec1
A user-agent string can contain multiple "products", in the case of
Gateway-MT at least this includes the HTTP client's full user agent.
This means that "other" is often logged even when we know the Storj
product, and sometimes logged more than once per call to "collect".
This makes sure that "other" is only logged if a product isn't
identified, and only logged once.
Change-Id: I8536f7eb32877e36fec97dab7b8d477ccb10f92e
transfer-sh will be set as of https://github.com/dutchcoders/transfer.sh/pull/467.
filezilla needs to be verified and duplicati is set per info from @TopperDEL
comet and orbiter are added as preparation.
Change-Id: I44d730a7b3ba1969068e48c2477b478831799cd1
Before this change we were returning full DB error message.
That can be very confusing for end user. This change is translating
error message into more user frindly version and fixes also DRPC
error status code.
Fixes https://github.com/storj/team-metainfo/issues/76
Change-Id: I29b06ab4ba50a0d14db7a822a2906d95d65ab524
We don't have different version of object than 1 so at the moment
this method is not needed. Also using GetObjectExactVersion
should be slightly more performant.
Change-Id: I78235d8ae22594cc1d6345dabcc915f41cd7797b
We already split main code base, now we need to split test
to reflect new files structure (bucket/object/segment/other).
Fixes https://github.com/storj/team-metainfo/issues/12
Change-Id: Ica1054c4fc7df764483b03f204b4beba094df8e1
This is part of change to split metainfo endpoint into smaller
files. It will be grouped by bucket/object/segment/other requests.
Tests will be split as a separate set of changes.
Updates https://github.com/storj/team-metainfo/issues/12
Change-Id: I6c691e4d0e192fe3ad7974d2d0ab5ced0d272f3c
This is part of change to split metainfo endpoint into smaller
files. It will be grouped by bucket/object/segment/other requests.
Tests will be split as a separate set of changes.
Change-Id: I9b097dcc8fa889f985b7f4ef5f8f435a1ff0ef95
This is part of change to split metainfo endpoint into smaller
files. It will be grouped by bucket/object/segment/other requests.
Tests will be split as a separate set of changes.
Change-Id: I5128c84e06c82777fe71460bf5f9a6e26e52a243
Currently the rate limit has kept per satellite api endpoint.
Since we run 9+ api endpoints in production, we do not need
a limit of 1000, since the intention was to allow 1000 total.
This change reduces the effective limit given 9 instances
down to 900, which should be close enough.
Change-Id: Ia579149ccc3a12e8febe0cfd5586b8a39de40f55
We were returning pure non rpc errors in two cases.
This change added loging and correct rpc error as a
return.
Change-Id: I581ceb17dcdc00921dfa3c1057015c3b4d04308d
We need to combine methods from accounting.Service (ExceedsStorageUsage and ExceedsSegmentUsage)
to run checks concurrently.
Resolves https://github.com/storj/team-metainfo/issues/73
Change-Id: I47831bca92457f16cfda789da89dbd460738ac97
Refactoring to do few things:
* move simple validation before validations with DB calls
* combine validation check/update for storage and segment
limits together
Change-Id: I6c2431ba236d4e388791d2e2d01ca7e0dd4439fc
updating project segment usage entry to redis is enabled only if
segment validation is enabled in config value, so no incompatible
changes will be added while deployment.
Change-Id: I1288cb9ff0a8a00f095dc94e20d2f14393e9a613
We want to know usage statistics for our main tools
like uplink-cli or rclone. Initially we will collect
only usage stats without relation to specific process
e.g. download or upload.
Change-Id: I203b1a6c07ae014e710368f77163f13fdf10763c
comment tests that contains fields needs
to rename on uplink side without breaking compatibility.
after rename tests will be moved back from comments.
Change-Id: I3bc4aff6ae7f6711ade956ac389f0d7e1a1ab91a
comment tests that contains fields needs
to rename on uplink side without breaking compatibility.
after rename tests will be moved back from comments.
Change-Id: I439783c62678c32805a85aa52bef1d2b767543a1
We want to be able to limit the number of segments per project for users.
To limit this we need to check limit value associated with project
and value of used segments already in BeginMoveObject, BeginMoveSegment
and increment cache segments usage after each CommitSegment call.
Resolves https://github.com/storj/team-metainfo/issues/1
Change-Id: I6290e67c095a174b9d101c4521802d9bfe0453b8
At some point we missed to add metadata key to list objects
response. Because of that uplink is taking key from pb.SteamMeta.
We need to clean it up.
Tests will be added on uplink side.
https://github.com/storj/uplink/issues/71
Change-Id: I3328e2f1b86bca15aeaf89f8e59cdca3c8e97742
For backward compatibility we are overriding pb.StreamMeta
values returned as encrypted metadata. It turns out that we
should do it not when target values are missing but when
values to override exists.
This was causing problems after move operation. Details can be
found here https://github.com/storj/uplink/issues/70
Backward compatibility test will be added to storj/uplink testsuite.
Change-Id: I72e7a01226b1dd62902cb0d6ebb1ff91a4693005
Previously, only valid partner IDs could be used for bucket level value attribution. Now that any useragent byte slice can be used, we should allow for empty useragent strings to be stored rather than throwing an error or leaving the bucket with no attribution.
Change-Id: I7043f835588dab1c401a27e31afd74b6b5a3e44b
Currently detecting if error NotFound is for object
or bucket is very fragile on uplink side. We cannot
change this messages for now.
Change-Id: I6ec4d98116477812f031134e4f1c9e73bdce8b27
Check if the context is done at the beginning of the download object and
segment and return right away if it's the case.
Check if Redis returned an error due to context cancellation for not
logging the error.
Change some logging messages of Redis errors to reflect on them if the
error happens while downloading an object or a segment.
Change-Id: I8ed8ff9ff7bb170b560f41356ea06820ce6c4e12
The main motivation is to wrap the bucket DB and metainfo DB, so we
could check if a bucket is empty before applying geofencing config.
Change-Id: I8bac21555e01d51a663fb557bc1acfc8106bc2e1
Add the project ID to error logs messages about not being able to
retrieve and track storage or bandwidth usage.
Some error logs related to these errors already contained the project ID
but others didn't, having it in the ones that didn't make them more
consistent and will provide more info which may be helpful for
troubleshooting them.
Change-Id: Ia9fc707a7f3aff0867645bb941badc199c2bf832
Don't log as an Error when users make request that cannot be fulfilled
because they exceed their storage or bandwidth limits.
Those are not system errors and the service is handling them correctly
and showing them in the logs an "ERROR" is misleading.
Change-Id: Iac642b7e8ba92840bb943192ad0694b5f4930258
To resolve problem with lack of ability to set metadata while MPU on
gateway we are adding setting metadata with BeginObject. This
change makes also metadata optional while CommitObject. We need
this functionality to not override metadata set with BeginObject in
case when metadata is not set with CommitObject.
Another reson is that we would like to not set metadata at all if user
didn't specify metadata. At the moment we always setting some bytes
for metadata fields e.g. empty EncryptedMetadata field can have key
and nonce set.
Change-Id: Ifee25b7718eb1f919119db9b698b29d8b5ebe2ec
To reduce database load, add option to omit as many object properties
as possible when listing objects.
Change-Id: I817633801b00629a4042d1d1bd2389ee581953de
Removed PathCipher and DefaultSegmentSize from CreateBucketParams
since they are unused anymore and breaks Integration on uplink side
Change-Id: I1393a7f1f436940731aa59edd693043336383290
The UserAgent should be stored as is, with the exception of removing the trailing version from any libuplink user agents
Change-Id: If17ef2fc4b59480a3477300f2585a07d64cc2bf4
