Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
Previously, we created a new file to use for directory verification
every time the storage node starts. This is not helpful if the storage node
points to the wrong directory when restarting. Now we will only create the file
on setup. Now the file should be created only once and will be verified at
runtime.
Change-Id: Id529f681469138d368e5ea3c63159befe62b1a5b
periodically create and delete a temp file in the storage directory
to verify writability. If this check fails, shut the node down.
Change-Id: I433e3a8d1d775fc779ae78e7cf3144a05ffd0574
This change accomplishes multiple things:
1. Instead of having a max in flight time, which means
we effectively have a minimum bandwidth for uploads
and downloads, we keep track of what windows have
active requests happening in them.
2. We don't double check when we save the order to see if it
is too old: by then, it's too late. A malicious uplink
could just submit orders outside of the grace window and
receive all the data, but the node would just not commit
it, so the uplink gets free traffic. Because the endpoints
also check for the order being too old, this would be a
very tight race that depends on knowledge of the node system
clock, but best to not have the race exist. Instead, we piggy
back off of the in flight tracking and do the check when
we start to handle the order, and commit at the end.
3. Change the functions that send orders and list unsent
orders to accept a time at which that operation is
happening. This way, in tests, we can pretend we're
listing or sending far into the future after the windows
are available to send, rather than exposing test functions
to modify internal state about the grace period to get
the desired effect. This brings tests closer to actual
usage in production.
4. Change the calculation for if an order is allowed to be
enqueued due to the grace period to just look at the
order creation time, rather than some computation involving
the window it will be in. In this way, you can easily
answer the question of "will this order be accepted?" by
asking "is it older than X?" where X is the grace period.
5. Increases the frequency we check to send up orders to once
every 5 minutes instead of once every hour because we already
have hour-long buffering due to the windows. This decreases
the maximum latency that an order will be reported back to
the satellite by 55 minutes.
Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
On run, write the storage directory verification file.
Every time the node runs it will write the file even if it already exists.
The reason we do this is because if the verification file is missing, the SN
doesn't know whether it is an incorrect directory, or it simply hasn't written
the file yet, and we want to keep nodes running without needing operator intervention.
Once this change has been a part of the minimum version for several releases,
we will move the file creation from the run command to the setup
command. Run will only verify its existence.
Change-Id: Ib7d20e78e711c63817db0ab3036a50af0e8f49cb
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.
The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.
Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
Part 2 of moving usedserials in memory
* Drop usedserials table in storagenodedb
* Use in-memory usedserials store in place of db for order limit
verification
* Update order limit grace period to be only one hour - this means
uplinks must send their order limits to storagenodes within an hour of
receiving them
Change-Id: I37a0e1d2ca6cb80854a3ef495af2d1d1f92e9f03
See https://storjlabs.atlassian.net/browse/SM-752
These changes allow us to change the log level at runtime through a handler off of the debug endpoint.
Examples of changing the log level on storj-sim
To get the current level for the satellite api process:
curl -XGET 'http://127.0.0.1:10009/logging' --header 'Content-Type: text/plain'
To change the log level:
curl -XPUT 'http://127.0.0.1:10009/logging' --header 'Content-Type: text/plain' --data-raw '{"level":"error"}'
Change-Id: I05d164b290929fa06b6d78c01075ee41f8238044
Currently uploads can cause a lot of IOPS, reduce this by introducing a
in-memory buffer on-top of the file.
Change-Id: I5f4e3e01c0a36258271d180b922107de447bcb59
CreateTables hasn't been quite true for a while now, rename to
MigrateToLatest to be clearer in it's behavior.
Change-Id: Ida48e95122a5d9b7a814e922d3698e00024a2ba7
When running testplanet tests, mark storagenode peer PieceDeleter as in
testing mode so that you don't have to do it on each test.
Change-Id: I2592e02c63f8bcc9152ecf436bac4e798b08bccf
Instead of providing the database from outside to testplanet create it
inside and then allow wrapping and modifying it. This is more convenient
to use.
Change-Id: I9b8f69e6e0a19ff984b4e2bfe927c9100c77bc6c
* debug
* traces
* cfgstruct
* process
Package `storj/private/version` will be removed as a separate change.
Change-Id: Iadc40faa782e6225513b28218952f02d9c240a9f
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
When a storagenode begins to run low on capacity, we want to notify
the satellite before completely running out of space. To achieve this,
at the end of an upload request, the SN checks if its available space has
fallen below a certain threshold. If so, trigger a notification to the
satellites.
The new NotifyLowDisk method on the monitor chore is implemented using the
common/syn2.Cooldown type, which allows us to execute contact only once
within a given timeframe; avoiding hammering the satellites with requests.
This PR contains changes to the storagenode/contact package, namely moving
methods involving the actual satellite communication out of Chore and into
Service. This allows us to ping satellites from the monitor chore
Change-Id: I668455748cdc6741291b61130d8ef9feece86458
Curently, storage nodes only report their capacity to satellites
once per hour. If a node fills up, it will fail all uploads until
the next contact cycle begins. With these changes, at the end of an
upload we check whether the MinimumDiskSpace threshold has been
passed. If so, trigger the monitor chore to update the node's
capacity, then trigger the contact chore to report the new
capacity to the satellites
Change-Id: Ie6aadaade1e2c12c87e03f8ff9059a50121380a0
this is to help protect against intentional or unintentional
slowloris style problems where a client keeps a tcp connection
alive but never sends any data. because grpc is great, we have
to spawn a separate goroutine for every read/write to the stream
so that we can return from the server handler to cancel it if
necessary. yep. really.
additionally, we update the rpcstatus package to do some stack
trace capture and add a Wrap method for the times where we want
to just use the existing error.
also fixes a number of TODOs where we attach status codes to the
returned errors in the endpoints.
Change-Id: Id8bb8ff84aa34e0f711b0cf9bce3908b36a1d3c1
Not having a skew caused an issue where:
1. Uplink calls "begin segment", where segment isn't committed to the
database.
2. Uplink stores piece X to the storage node A with timestamp 1.
3. Satellite runs garbage collection with timestamp 2.
4. Satellite sends retain request to storage node A with timestamp 2.
5. Storage node A deletes piece X, because 1 < 2.
6. Uplink calls "commit segment" with storage node A in it.
7. Download of segment fails, because A doesn't have piece X.
In production this is not an issue since the MaxTimeSkew is 72h by
default.
Change-Id: Id87ca3ddc44103dcd85d031b1367168c014b8e7b
storagenode database preflight check.
Disable preflight database check by default, and have the option to
enable it. This will allow us to enable it once it is definitely
working.
Also change the name of the config flag for preflight time sync.
Change-Id: Ie2e20f9e25dcb38794eafa7e1505e7c6ff287c99
The default interval tries to balance:
1. ensure that most things run at least once during tests
2. ensure that they won't run over 10 times
Change-Id: I911b57b595ffbef1963654bf4a42efad1534b058
Close a peer didn't guarantee that the peer ended its services and we
want that when a StopPeer method returns the peer service is actually
finished.
Change-Id: If97f41b7e404990555640c71e097ebc719678ae7
- also updated ping chore to pick up trust changes
- fixed small typo in blueprint
- fixed flags for storj-sim
- wired up changes to testplanet
Change-Id: I02982f3a63a1b4150b82a009ee126b25ed51917d
