We have added a bug with v0.31.7 and deploying it would kick out all the
storage nodes that are full. Easy fix is setting the requirment to 0.
That will allow them to still start up even if they are full.
Change-Id: Ie66f369952d929fcfd47f44f6e5e57eea8f51ff6
Per default our server address is listening on all IP addresses on the machine.
This caused our preflight check to fail, as it did not have an hostname to lookup.
With this change, we are fine with this and go ahead.
Change-Id: I9eb5c891c099eb35f679d6d7e79ec38bb43b619f
1 transfer with a minimum speed of 128 Bytes was a nice try but it is
way too low. Even a pi3 was able to handle 7 grpc transfers. We have 4
satellites and with 5 concurrent transfers that should be a total of 20
concurrent transfers. Each transfer will have a minimum speed of 5KB/s.
That should give us a better througput and still be Ok on a pi3.
Change-Id: I650a7baf890080901ef70ea3b5636d93009b4e60
With the v0.30.5 release we asked the storage node operators to manually
enable the preflight check while they are in front of their machine. We
didn't want to risk taking too many storage nodes offline at the same
time because of some unknow bug. The preflight check worked. We have no
negative feedback. We can now enable it by default.
Change-Id: Ic670ee52becd0b35eca84af7a0841ea983d7b19d
clock sync
Change 24h and 1h to 30m and 10m respectively for clock sync. If a
storagenode's clock is off by more than 30m for every trusted satellite,
it will not start. If it is off by more than 10m for any trusted
satellite, a warning is displayed.
Change-Id: I05ef611a30a49c1783e3b68b513745922c2f7e28
this is to help protect against intentional or unintentional
slowloris style problems where a client keeps a tcp connection
alive but never sends any data. because grpc is great, we have
to spawn a separate goroutine for every read/write to the stream
so that we can return from the server handler to cancel it if
necessary. yep. really.
additionally, we update the rpcstatus package to do some stack
trace capture and add a Wrap method for the times where we want
to just use the existing error.
also fixes a number of TODOs where we attach status codes to the
returned errors in the endpoints.
Change-Id: Id8bb8ff84aa34e0f711b0cf9bce3908b36a1d3c1
A few variables were not renamed to the new standard piecesTotal and
piecesContentSize, so it was unclear which value was being used. These
have been updated, and some comments made more thorough.
Change-Id: I363bad4dec2a8e5c54d22c3c4cd85fc3d2b3096c
This change updates the storagenode piecestore apis to expose access to
the full piece size stored on disk. Previously we only had access to
(and only kept a cache of) the content size used for all pieces. This
was inaccurate when reporting the amount of disk space used by nodes.
We now have access to the total content size, as well as the total disk
usage, of all pieces. The pieces cache also keeps a cache of the total
piece size along with the content size.
Change-Id: I4fffe7e1257e04c46021a2e37c5adc6fe69bee55
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
Replace all the remaining uses of sql.DB with tagsql.DB to
fix issues with context cancellation.
Introduce tagsql.Open which helps to get rid of all tagsql.Wrap-s.
Use tagsql in cockroachkv and postgreskv.
Change-Id: I8946d203341cb85a25976896fc7881e1f704e779
Migration step was closing a database that was used by
the migration itself. There is an active tranasction
over the database.
Instead of closing in the same transaction we can wait
until restart for the database cleanup.
Change-Id: Ic971d8cea81a3ab783f4a1bdc6357009c8b31386
Also added temporary types withRebind and withTagTx,
which will be later removed. Currently they help to avoid
changing the whole codebase at the same time.
Change-Id: I7f07ba8f4709a23a463bfa67464628665a05808f
storagenode database preflight check.
Disable preflight database check by default, and have the option to
enable it. This will allow us to enable it once it is definitely
working.
Also change the name of the config flag for preflight time sync.
Change-Id: Ie2e20f9e25dcb38794eafa7e1505e7c6ff287c99
On pieces usage cache init we now load the trash info from the db. Also
fixes a test that was masking the failure here.
Change-Id: I9ff7da5bc6c0f74cf0942e20931b40e0c88d70fa
for storagenode
Ensure that database schema matches latest test migration schema before
allowing the node to start up.
Ensure minimal read/write functionality for each storagenode database
before allowing the node to start up.
This will eliminate many unhandled audit errors we are seeing.
Change-Id: Ic0e628b04a9c35b7a8243f6a81d4683918170ba9
This reverts commit 8e242cd012.
Revert because lib/pq has known issues with context cancellation.
These issues need to be resolved before these changes can be merged.
Change-Id: I160af51dbc2d67c5449aafa406a403e5367bb555
this will allow for some nice runtime analysis down the road.
also, this allows for wrapping database handles in a way that
can interact with these contexts
requires https://review.dev.storj.io/c/storj/dbx/+/514
Change-Id: Ib087b7cd73296dd2c1e0331314da34d861f61d2b
When error is formatted using %v it's not possible to check
whether the error was caused by a context cancellation.
Change-Id: Ia77dfb0817e49d9a7b168c12a6300d131007d0ee
This code needs to work against cockroachDB, so transactions must be retried
when a retryable error is returned. This change puts migrate
transactions into the dbutil.WithTx transactional helpers to achieve
this in the easiest way.
Change-Id: Ib930e82d55cb0257357a222ce9131e6e53372c03
Remove starting up messages from peers. We expect all of them to start,
if they don't, then they should return an error why they don't start.
The only informative message is when a service is disabled.
When doing initial database setup then each migration step isn't
informative, hence print only a single line with the final version.
Also use shorter log scopes.
Change-Id: Ic8b61411df2eeae2a36d600a0c2fbc97a84a5b93
Remove direct dependency on uplink.RSConfig, this simplifies
moving the config file without introducing weird dependencies.
Change-Id: I7fd2a145401e0205d7047631df9d2810241efeec
This commit adds functionality to include the space used in the trash
directory when calculating available space on the node.
It also includes this trash value in the space used cache, with methods
to keep the cache up-to-date as files are trashed, restored, and
emptied.
As part of the commit, the RestoreTrash and EmptyTrash methods have
slightly changed signatures. RestoreTrash now also returns the keys that
were restored, while EmptyTrash also returns the total disk space
recovered. Each of these changes makes it possible to keep the cache
up-to-date and know how much space is being used/recovered.
Also changed is the signature of PieceStoreAccess.ContentSize method.
Previously this method returns only the content size of the blob,
removing the size of any header data. This method has been renamed
`Size` and returns both the full disk size and content size of the blob.
This allows us to only stat the file once, and in some instances (i.e.
cache) knowing the full file size is useful.
Note: This commit simply adds the trash size data to the piece size data
we were already collecting. The piece size data is not accurate for all
use-cases (e.g. because it does not contain piece header data); however,
this commit does not fix that problem. Now that the ContentSize (Size)
method returns the full size of the file, it should be easier to fix
this problem in a future commit.
Change-Id: I4a6cae09e262c8452a618116d1dc66b687f59f85
Fixes a data race caused by not waiting for workers to finish
before shutting down. Currently this ended up failing logging
because it was closed when test tried to write to it.
Change-Id: I074045cd83bbf49e658f51353aa7901e9a5d074b
- also updated ping chore to pick up trust changes
- fixed small typo in blueprint
- fixed flags for storj-sim
- wired up changes to testplanet
Change-Id: I02982f3a63a1b4150b82a009ee126b25ed51917d
planet.Start starts a testplanet system, whereas planet.Run starts a testplanet
and runs a test against it with each DB backend (cockroach compat).
Change-Id: I39c9da26d9619ee69a2b718d24ab00271f9e9bc2
Satellite URL is a stricter form of the STORJ Node URL. It requires both
the ID and port specifier.
Change-Id: I7fd302064f864c1de8240a7915bf5263b898dfd1
* pkg/pg: Add new service function storage node
Add a new service function to the storage node piece store for deleting
pieces when satellites request them.
* storagenode/piecestore: Add endpoint to delete piece
Add a new endpoint to receive from trusted satellites to delete a piece.
* private/testplanet: Fix storagenode mock
Add to the storagenode mock the new endpoint method.
* proto.lock: Update it with the last protbuff changes
* storagenode/piecestore: Reuse test piece upload
Extract the repeated logic from several tests functions for uploading a
test piece to a test helper function.
* uplink/piecestore: Implement client side method
Implement the client side method of the new piecestore RPC function.
* storagenode/piecestore: Add test DeletePiece endpoint
Implement a test for the DeletePiece new endpoint method.
* put TestCreateV0 back in StoreForTest
* avoid direct handles to V0 pieceinfo db
* type mismatch fix
* use storage.Blobs interface in store_test.go
..instead of filestore.Store. this will allow filestore.Store to become
unexported.
* unexport filestore.Store
rename it to blobStore. things should use the storage.Blobs interface
instead. changes in this commit are purely mechanical (made through the
"refactor" tool in Gocode followed by search/replace on the word "Store"
within the storage/filestore/ directory).
* kill filestore.StoreForTest
now that filestore.blobStore is unexported, there isn't a need for a
specialized wrapper type. this (not coincidentally) also makes it
possible for the WriterForFormatVersion() method on
storagenode/pieces.StoreForTest to work, without requiring everything to
wrap the store.blobs attribute in a filestore.StoreForTest, which was
impractical.
* change satellite.Peer name to Core
* change to Core in testplanet
* missed a few places
* keep shared stuff in peer.go to stay consistent with storj/docs
* improve errors in satellite contact endpoints
* add changes per CR comments
* update pingback method so it still updates node table
* fix err and returns
* fix zap logging to be better
When the contact chore starts running before the monitor service has
provided any useful capacity data, the first outgoing contact has
not-very-helpful data for the satellite. This change causes the contact
chore to wait until capacity data is available. The wait should be quite
short in all reasonable cases: even when a node starts with a lot of
stored pieces and no cached spaceUsedDB data, new data will have been
calculated and cached by the call to
`peer.Storage2.CacheService.Init(ctx)` in `storagenode.cmdRun()` before
`peer.Run(ctx)`.
Change-Id: Ibc26d5c1fc10a23006c00bc3f13ff6cf71f8bf1d
* Make the exiting node check piece hashes, piece IDs, and piece hash signatures before relaying successful transfer data to the satellite.
* Enable immediate graceful exit failure for "successful" transfers that fail satellite-side validation.
* Move transfer piece logic in storagenode worker to separate function (to make the worker easier to understand)
* add overall failure percentage check and inactive time frame check before sending a response to sno
* update comment
* delete node from transfer queue if it has been inactive for too long
* fix linting error
* add test config value
* fix nil pointer
* add config value into testplanet
* add unit test for overall failure threshold
* move timeframe threshold to chore
* update protolock
* add chore test
* add per peiece failure count logic
* change config name from EndpointMaxFailures to MaxFailuresPerPiece
* address comments
* fix linting error
* add error handling for no row returned from progress table
* fix test for graceful exit chore on storagenode
* fix typo InActive -> Inactive
* improve readability for failure threshold calculation
* update config lock
* change error handling for GetProgress in graceful exit endpoint on the satellite side
* return proper rpc error in endpoint
* add check in chore test for checking finish timestamp and queue
libuplink was incorrectly setting timeouts to 10 seconds still, but
should have been at least 10 minutes. the order sender was setting them
to 1 hour. we don't want timeouts in uplink-side logic as it establishes
a minimum rate on tcp streams.
instead of all of this, just use tcp keep alive. tcp keep alive packets are
sent every 15 seconds and if the peer stops responding the connection
dies. this is enabled by default with go. this will kill tcp connections
when they stop working.
Change-Id: I3d7ad49f71950b3eb43044eedf4b17993116045b
The upload code currently updates the usage in a deferred call to saveOrder().
The consequence is that in the success case, the RPC is completed before
the usage has been updated.
This change repurposes the deferred call to update usage in the
failure case, while explicitly updating the usage before completing the
RPC.
This fixes some test flakiness when using dRPC. gRPC waits until the final status is written before a Recv call completes, and the final status is written by the server after the handler function has exited. In practice this means that the client is blocked until the defer call is also finished. So this change will not change performance at all.
It has two advantages:
(1) It fixes test flakiness
and, more importantly:
(2) reduces the chances that someone will accidentally write a flaky test in the future
* add exit-status command
* remove todo and fix format
* fix status display
* change startExit to exit progress
* fix linting error
* add successful column in exit progress
* fix test
* remove extra new line
* fix TYPOS
* format the percentage better
This change adds a trusted registry (via the source code) of node address to node id mappings (currently only for well known Satellites) to defeat MITM attacks to Satellites. It also extends the uplink UI such that when entering a satellite address by hand, a node id prefix can also be added to defeat MITM attacks with unknown satellites.
When running uplink setup, satellite addresses can now be of the form 12EayRS2V1k@us-central-1.tardigrade.io (not even using a full node id) to ensure that the peer contacted is the peer that was expected. When using a known satellite address, the known node ids are used if no override is provided.
the net package does not make it easy to know if DialContext
failed because the context was done. it's important for some
of our tests that canceled contexts are detected as such, so
we accept the small race that's arguably correct (the context
must be canceled asynchronously) to ensure we always return
the context error if available.
Change-Id: I058064d5c666e5353b74fb5bd300bf7abe537ff5
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
* storagenode/storagenodedb: Migrate to separate dbs
* storagenode/storagenodedb: Add migration to drop versions tables
* Put drop table statements into a transaction.
* Fix CI errors.
* Fix CI errors.
* Changes requested from PR feedback.
* storagenode/storagenodedb: fix tx commit
* test that all nodes can check in with all satellites
* keep kademlia config
* add untrusted satellite test
* use getversion
* remove kademlia config changes in test-sim-backwards.sh
* add kademlia flags back to storj-sim storagenode
* reset kademlia flags in storagenode entrypoint
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
* Split the info.db database into multiple DBs using Backup API.
* Remove location. Prev refactor assumed we would need this but don't.
* Added VACUUM to reclaim space after splitting storage node databases.
* Added unique names to SQLite3 connection hooks to fix testplanet.
* Moving DB closing to the migration step.
* Removing the closing of the versions DB. It's already getting closed.
* Swapping the database connection references on reconnect.
* Moved sqlite closing logic away from the boltdb closing logic.
* Moved sqlite closing logic away from the boltdb closing logic.
* Remove certificate and vouchers from DB split migration.
* Removed vouchers and bumped up the migration version.
* Use same constructor in tests for storage node databases.
* Use same constructor in tests for storage node databases.
* Adding method to access underlining SQL database connections and cleanup
* Adding logging for migration diagnostics.
* Moved migration closing database logic to minimize disk usage.
* Cleaning up error handling.
* Fix missing copyright.
* Fix linting error.
* Add test for migration 21 (#3012)
* Refactoring migration code into a nicer to use object.
* Refactoring migration code into a nicer to use object.
* Fixing broken migration test.
* Removed unnecessary code that is no longer needed now that we close DBs.
* Removed unnecessary code that is no longer needed now that we close DBs.
* Fixed bug where an invalid database path was being opened.
* Fixed linting errors.
* Renamed VersionsDB to LegacyInfoDB and refactored DB lookup keys.
* Renamed VersionsDB to LegacyInfoDB and refactored DB lookup keys.
* Fix migration test. NOTE: This change does not address new tables satellites and satellite_exit_progress
* Removing v22 migration to move into it's own PR.
* Removing v22 migration to move into it's own PR.
* Refactored schema, rebind and configure functions to be re-useable.
* Renamed LegacyInfoDB to DeprecatedInfoDB.
* Cleaned up closeDatabase function.
* Renamed storageNodeSQLDB to migratableDB.
* Switched from using errs.Combine() to errs.Group in closeDatabases func.
* Removed constructors from storage node data access objects.
* Reformatted usage of const.
* Fixed broken test snapshots.
* Fixed linting error.
