Commit Graph

48 Commits

Author SHA1 Message Date
Cameron Ayer
b22bf16b35 satellite/overlay: add config flag for node selection free disk requirement
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.

Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
2020-02-11 18:08:25 +00:00
Natalie Ventura Villasana
3900dadafd satellite/overlay: find new nodes with ExcludedIPs
Adds ExcludedIPs to the NodeCriteria for selecting new storage
nodes. Previously, ExcludedIPs was only added to the NodeCriteria
for selecting reputable storage nodes. Now that both are included
in the FindStorageNodesWithPreferences call, it should no longer
be possible to repair pieces to nodes that are on the same IP as
nodes already storing pieces from that segment.
Adds TestSelectNewStorageNodesExcludedIPs to make sure that
SelectNewStorageNodes returns nodes with different IP addresses.

https://storjlabs.atlassian.net/browse/V3-3011

Change-Id: Ic2d5e607cadeba6e8d5c40f9717149cb30880335
2020-02-10 23:45:17 +00:00
Jeff Wendling
7999d24f81 all: use monkit v3
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.

graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.

it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.

Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
2020-02-05 23:53:17 +00:00
Egon Elbre
0c0b47823d satellite: use require.WithinDuration
Noticed that assert/require has WithinDuration for comparing
time.Time-s.

Change-Id: Ia340896443f610d38799b7ef245b5775eecfc92b
2020-01-21 19:43:53 +02:00
Egon Elbre
f3b4bf2b7c satellite/satellitedb/satellitedbtest: pass ctx as an argument
ctx is created in most tests, instead pass in as argument
to reduce code duplication.

Change-Id: I466c51c008392001129c8b007c9d6b3619935ac4
2020-01-20 16:35:42 +02:00
Egon Elbre
a4026f97b8 satellite: fix test time comparisons
Correct way to compare time that may have an error is to use InDelta.

Change-Id: I0140892119c44c63fa042bbc7292ab91bb33a350
2020-01-20 10:17:20 +00:00
Natalie Ventura Villasana
6b1829f3c3
satellite/downtime: new chore estimates downtime
Adds EstimationChore to the downtime package, which is an
independent chore that finds offline nodes given a configurable
limit, then uptime checks those nodes, and sets a last contact
success or failure given a response. For failed nodes, the chore
updates the amount of downtime the node has been offline in the
DowntimeTracking table.

Design doc section: https://github.com/storj/storj/blob/master/docs/blueprints/storage-node-downtime-tracking.md#estimating-offline-time
Jira: https://storjlabs.atlassian.net/browse/V3-2545

Change-Id: I60af95803930bf9b33232b248bb20cca6f0e0b5f
2020-01-09 15:05:13 -05:00
Yingrong Zhao
76ee8a1b4c satellite: remove UptimeReputation configs from codebase
With the new storage node downtime tracking feature, we need remove current uptime reputation configs: UptimeReputationAlpha, UptimeReputationBeta, and
UptimeReputationDQ. This is the first step of removing the uptime
reputation columns from satellitedb

Change-Id: Ie8fab13295dbf545e33aeda0c4306cda4ba54e36
2020-01-08 18:54:15 +00:00
Natalie Ventura Villasana
1cb0f80a8d satellite/gracefulexit: dq node on exit fail
Disqualifies a node when the node fails to complete a graceful
exit.

Adds a new DisqualifyNode method to the overlay cache, since there
wasn't an existing method to disqualify a node but do nothing else
to its stats.

Adds checks to existing tests to make sure that a storage node that
fails a graceful exit is marked as disqualified in the overlay
cache.

https: //storjlabs.atlassian.net/browse/V3-3342
Change-Id: I4d554a519ab59db31ad3b8e28764c8683a6e3888
2020-01-06 19:16:26 -05:00
Moby von Briesen
6c2e4cc0cd satellite/overlay: Return NodeLastContact instead of a node dossier from
overlay.GetOfflineNodesLimited

We only care about node ID, address, and last contact success/failure
from the downtime service, so the overlay should only return these
values for the downtime-specific queries.

Change-Id: I08a6ecfdd2a12b82cae62e87d6adeab53975bfce
2020-01-06 17:12:30 -05:00
Ethan
05b406e992 satellite:{downtime,overlay}: Implement offline node detection chore
https://storjlabs.atlassian.net/browse/V3-3398

Change-Id: I598c3bad819026377d1d113c099dc9bba8b02742
2020-01-03 17:10:03 +00:00
Moby von Briesen
ff74b44c5f satellite/overlay: Add ability for overlay to get offline nodes ordered by last checked time
This is required for the downtime tracking service: https://storjlabs.atlassian.net/browse/V3-2545

Change-Id: I286cdc07d802393948eb10c25c45ba78cc3ceafc
2020-01-02 16:39:38 +00:00
Egon Elbre
6615ecc9b6 common: separate repository
Change-Id: Ibb89c42060450e3839481a7e495bbe3ad940610a
2019-12-27 14:11:15 +02:00
Kaloyan Raev
f8d0864630 satellite/metainfo: use KnownReliable in DeleteObjectPieces
This reduces the number of queries to the overlay when deleting objects.

Change-Id: I28ed2c2d225e0c5eb1a8d952235fa7e5837a48d1
2019-12-18 12:38:22 +00:00
Kaloyan Raev
5ee1a00857 satellite/overlay: filter reliable nodes from a list
Adds the KnownReliable method to Overlay Service that filters all nodes
from the given list to be only reliable nodes (online and qualified).
The method return []*pb.Node of reliable nodes. The pb.Node values are
ready for dialing.

The first use case is when deleting an object to efficiently dial all
reliable nodes holding a piece of that object and send them a delete
request.

Change-Id: I13e0a8666f3807c5c31ef1a1087476018a5d3acb
2019-12-17 21:20:08 +00:00
Egon Elbre
7a36507a0a private/testcontext: ensure we call cleanup everywhere
Change-Id: Icb921144b651611d78f3736629430d05c3b8a7d3
2019-12-17 14:16:09 +00:00
littleskunk
8b3444e088
satellite/nodeselection: don't select nodes that haven't checked in for a while (#3567)
* satellite/nodeselection: dont select nodes that havent checked in for a while

* change testplanet online window to one minute

* remove satellite reconfigure online window = 0 in repair tests

* pass timestamp into UpdateCheckIn

* change timestamp to timestamptz

* edit tests to set last_contact_success to 4 hours ago

* fix syntax error

* remove check for last_contact_success > last_contact_failure in IsOnline
2019-11-15 23:43:06 +01:00
Egon Elbre
ee6c1cac8a
private: rename internal to private (#3573) 2019-11-14 21:46:15 +02:00
Egon Elbre
1e64006e32 lint: add staticcheck as a separate step (#3569) 2019-11-14 10:31:30 +02:00
Natalie Villasana
68a7790069 satellite/gracefulexit: select new node filtered by Distinct IP (#3435) 2019-11-06 16:38:51 -05:00
Maximillian von Briesen
54594e79c3 satellite/gracefulexit: add metrics on satellite for graceful exit (#3355) 2019-10-29 16:22:20 -04:00
Yingrong Zhao
fa1ac24e19
satellite/gracefulexit: add failure threshold check (#3329)
* add overall failure percentage check and inactive time frame check before sending a response to sno

* update comment

* delete node from transfer queue if it has been inactive for too long

* fix linting error

* add test config value

* fix nil pointer

* add config value into testplanet

* add unit test for overall failure threshold

* move timeframe threshold to chore

* update protolock

* add chore test

* add per peiece failure count logic

* change config name from EndpointMaxFailures to MaxFailuresPerPiece

* address comments

* fix linting error

* add error handling for no row returned from progress table

* fix test for graceful exit chore on storagenode

* fix typo InActive -> Inactive

* improve readability for failure threshold calculation

* update config lock

* change error handling for GetProgress in graceful exit endpoint on the satellite side

* return proper rpc error in endpoint

* add check in chore test for checking finish timestamp and queue
2019-10-24 12:24:42 -04:00
Maximillian von Briesen
abb567f6ae
cmd/satellite: add graceful exit reports command to satellite CLI (#3300)
* update lock file and add comment

* add created at and bytes transferred

* cleanup

* rename db func to GetGracefulExitNodesByTimeFrame

* fix flag

* split into two overlay functions

* := to =

* fix test

* add node not found error class

* fix overlay test

* suggested test changes

* review suggestions

* get exit status from overlay.Get()

* check rows.Err

* fix panic when ExitFinishedAt is nil

* fix comments in cmdGracefulExit
2019-10-22 21:06:01 -04:00
Natalie Villasana
45c35d7c3f
satellite/satellitedb: add exit_status column to nodes table (#3301) 2019-10-17 11:01:39 -04:00
Jennifer Li Johnson
b185dbbee2
satellite/discovery: remove discovery related code (#3175) 2019-10-14 10:57:01 -04:00
Ethan Adams
a1275746b4
satellite/gracefulexit: Implement the 'process' endpoint on the satellite (#3223) 2019-10-11 17:18:05 -04:00
Maximillian von Briesen
f75893c1ba
satellite/overlay: do not include gracefully exiting nodes in node selection (#3211) 2019-10-08 15:03:38 -04:00
Maximillian von Briesen
0ea0d8c3da
satellite/overlay: remove overlay.IsVetted (#3203) 2019-10-08 09:25:41 -04:00
Jennifer Li Johnson
7ceaabb18e
Delete Bootstrap and Kademlia (#2974) 2019-10-04 16:48:41 -04:00
Natalie Villasana
4f2f8ae11b satellite/overlay: add UpdateExitStatus and GetExitingNodes for graceful exit (#3087) 2019-10-01 18:18:21 -04:00
Cameron
fd72de211c satellite/satellitedb: update node version columns in UpdateCheckIn (#3129)
* update node version columns in UpdateCheckIn

* tests and fix sqlite implementation

* check timestamps

* edit timestamp check
2019-09-26 02:07:39 +02:00
Egon Elbre
9ceff9f9c6 satellite/overlay: move CheckIn benchmark to overlay (#3095) 2019-09-20 16:35:52 -04:00
paul cannon
53db517154 satellite/overlay: don't use transport observers (#2989) 2019-09-19 16:22:50 -04:00
Jess G
93788e5218
remove kademlia: create upsert query to update uptime (#2999)
* create upsert query for check-in method

* add tests

* fix lint err

* add benchmark test for db query

* fix lint and tests

* add a unit test, fix lint

* add address to tests

* replace print w/ b.Fatal

* refactor query per CR comments

* fix disqualified, only set if null

* fix query

* add version to updatecheckin query

* fix version

* fix tests

* change version for tests

* add version to tests

* add IP, add transport, mv unit test

* use node.address as arg

* add last ip

* fix lint
2019-09-19 11:37:31 -07:00
Jennifer Li Johnson
ce3203e910
update NodeSelectionConfig.OnlineWindow to 4hr default (#3082) 2019-09-18 14:57:57 -04:00
Maximillian von Briesen
574c96c350
satellite/metainfo: Verify storagenode signature on satellite upload (#2985) 2019-09-18 09:50:33 -04:00
Natalie Villasana
aa3567187e
satellite/audit: worker now verifies and reverifies (#2965) 2019-09-11 18:37:01 -04:00
Egon Elbre
3d410add40
satellite/overlay: avoid large statement for piece counts (#3001) 2019-09-12 00:38:58 +03:00
Egon Elbre
a801fab66a
all: add archview annotations (#2964) 2019-09-10 16:24:16 +03:00
Bryan White
a33106df1c
satellite/satellitedb: persist piece counts to/from db (#2803) 2019-08-27 14:37:42 +02:00
aligeti
33aff71959 satellitedb/overlay: add database for storing peer identities (#2764) 2019-08-26 19:49:42 +03:00
Egon Elbre
00b2e1a7d7 all: enable staticcheck (#2849)
* by having megacheck in disable it also disabled staticcheck

* fix closing body

* keep interfacer disabled

* hide bodies

* don't use deprecated func

* fix dead code

* fix potential overrun

* keep stylecheck disabled

* don't pass nil as context

* fix infinite recursion

* remove extraneous return

* fix data race

* use correct func

* ignore unused var

* remove unused consts
2019-08-22 13:40:15 +02:00
Bryan White
6400d63a6c
satellite/satellitedb: Add piece count column to nodes table (#2795) 2019-08-19 12:58:13 +02:00
Isaac Hess
e34b2c553c
Reduce UpdateAddress calls with address cache (#2681) 2019-08-06 16:56:12 -06:00
Egon Elbre
c8edeb0257
satellite/overlay: rename overlay.Cache to overlay.Service (#2717) 2019-08-06 19:35:59 +03:00
ethanadams
c9b46f2fe2
V3-1987: Optimize audits stats persistence (#2632)
* Added batch update stats for recordAuditSuccessStatus
* Added batch update stats to recordAuditFailStatus
* added configurable batch size
* build individual update/delete statements so the statements can be batched into 1 call to the DB
* notified #config-changes channel and ran make update-satellite-config-lock
* updated tests to use batch update stats
2019-07-31 13:21:06 -04:00
Egon Elbre
ec3d5c0bdd
don't use global loggers (#2671)
* pkg/server: don't use global logger
* satellite/overlay: use correct logger
* pkg/kademlia: use correct logger
* linksharing: use conventional way to pass in logger
* use zaptest in tests
2019-07-31 15:09:45 +03:00
Egon Elbre
5d0816430f
rename all the things (#2531)
* rename pkg/linksharing to linksharing
* rename pkg/httpserver to linksharing/httpserver
* rename pkg/eestream to uplink/eestream
* rename pkg/stream to uplink/stream
* rename pkg/metainfo/kvmetainfo to uplink/metainfo/kvmetainfo
* rename pkg/auth/signing to pkg/signing
* rename pkg/storage to uplink/storage
* rename pkg/accounting to satellite/accounting
* rename pkg/audit to satellite/audit
* rename pkg/certdb to satellite/certdb
* rename pkg/discovery to satellite/discovery
* rename pkg/overlay to satellite/overlay
* rename pkg/datarepair to satellite/repair
2019-07-28 08:55:36 +03:00