We have an alert on `repair_too_many_nodes_failed` which fires too
frequently. Every time so far, it has been because of a network blip of
some nature on the satellite side.
Satellite operators are expected to have other means in place for
alerting on network problems and fixing them, so it's not necessary for
the repair framework to act in that way.
Instead, in this change, we change the way that
`repair_too_many_nodes_failed` works. When a repair fails, we collect
piece fetch errors by type and determine from them whether it looks like
we are having network problems (most errors are connection failures,
possibly also some successful connections which subsequently time out)
or whether something else has happened.
We will now only emit `repair_too_many_nodes_failed` when the outcome
does not look like a network failure. In the network failure case, we
will instead emit `repair_suspected_network_problem`.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: I49df98da5df9c606b95ad08a2bdfec8092fba926
This structure is entirely unused within the audit module, and is only
used by repair code. Accordingly, this change moves the structure from
audit code to repair code.
Also, we take the opportunity here to rename the structure to something
less generic.
Refs: https://github.com/storj/storj/issues/4669
Change-Id: If85b37e08620cda1fde2afe98206293e02b5c36e
This is in response to community feedback that our existing reputation
calculation is too likely to disqualify storage nodes unfairly with
extreme swings up and down.
For details and analysis, please see the data_loss_vs_dq_chance_sim.py
tool, the "tuning reputation further.ipynb" Jupyter notebook in the
storj/datascience repository, and the discussion at
https://forum.storj.io/t/tuning-audit-scoring/14084
In brief: changing the lambda and initial-alpha parameters in this way
causes the swings in reputation to be smaller and less likely to put a
node past the disqualification threshold unfairly.
Note: this change will cause a one-time reset of all (non-disqualified)
node reputations, because the new initial alpha value of 1000 is
dramatically different, and the disqualification threshold is going to
be much higher.
Change-Id: Id6dc4ba8fde1be3db4255b72282207bab5491ca3
I don't know why the go people thought this was a good idea, because
this automatic reformatting is bound to do the wrong thing sometimes,
which is very annoying. But I don't see a way to turn it off, so best to
get this change out of the way.
Change-Id: Ib5dbbca6a6f6fc944d76c9b511b8c904f796e4f3
TestSegmentInExcludedCountriesRepair and TestSegmentInExcludedCountriesRepairIrreparable are using 20 storage nodes.
This change make them use 7 by adjusting the test redundancy scheme.
Change-Id: I1a44aa8b997d6edcc9a3305fdd0dac57e4d525b5
We don't need to have every single test for both, only one for
each should be sufficient. For all other tests it doesn't matter
which one we use.
Change-Id: I9962206a4ee025d367332c29ea3e6bc9f0f9a1de
For nodes in excluded areas, we don't necessarily want to remove them
from the pointer, but we do want to increase the number of pieces in the
segment in case those excluded area nodes go down. To do that, we
increase the number of pieces repaired by the number of pieces in
excluded areas.
Change-Id: I0424f1bcd7e93f33eb3eeeec79dbada3b3ea1f3a
inconsistency
The original design had a flaw which can potentially cause discrepancy
for nodes reputation status between reputations table and nodes table.
In the event of a failure(network issue, db failure, satellite failure, etc.)
happens between update to reputations table and update to nodes table, data
can be out of sync.
This PR tries to fix above issue by passing through node's reputation from
the beginning of an audit/repair(this data is from nodes table) to the next
update in reputation service. If the updated reputation status from the service
is different from the existing node status, the service will try to update nodes
table. In the case of a failure, the service will be able to try update nodes
table again since it can see the discrepancy of the data. This will allow
both tables to be in-sync eventually.
Change-Id: Ic22130b4503a594b7177237b18f7e68305c2f122
If satellite can't find enough nodes to successfully download a segment,
it probably is not the fault of storage nodes.
Change-Id: I681f66056df0bb940da9edb3a7dbb3658c0a56cb
work
Since we have changed the repair worker to also mark a node as audit
failure if they return a not found error, we should ignore expired
segments when possible
Change-Id: Ie6a677e1d7b234e93965c736d05950440236653c
Update repair tests to check if audit score increases for nodes
that successfully send pieces during successfull and failed repairs.
Change-Id: Ie6abbde6155ab4697d209366c9fa497e731756e9
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
Sometimes we see timeouts from DNS lookups when trying to do
repair GETs. Solution: try using node's last IP and port first.
If we can't connect, retry with DNS lookup.
Change-Id: I59e223aebb436118779fb18378f6e09d072f12be
We want to use StreamID/Position to identify injured
segment. As it is hard to alter existing injuredsegments
table we are adding a new table that will replace existing
one. Old table will be dropped later.
Change-Id: I0d3b06522645013178b6678c19378ebafe485c49
This is part of metaloop refactoring. We plan to remove
irreparable at some point but there was not time for it.
Now instead refatoring it for segmentloop its just easier
to drop it.
Later we still need to drop table with migration step.
Change-Id: I270e77f119273d39a1ecdcf5e1c37a5662a29ab4
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
It's impossible to time correctly this check. The segment may expire
just at the time we upload the repaired pieces to new storage nodes.
They will reject this as expired and the repair will fail.
Also, we penalize storage nodes with audit failure only if they fail
piece hash verification, i.e. return incorrect data, but only if they
have already deleted the piece.
So, it would be best if the repair service does not care about object
expiration at all. This is a responsibility of another service.
Removing this check will also simplify how we migrate this code
correctly to the metabase.
Change-Id: I09f7b372ae2602daee919a8a73cd0475fb263cd2
Rather than having a single repair override value, we will now support
repair override values based on a particular segment's RS scheme.
The new format for RS override values is
"k/o/n-override,k/o/n-override..."
Change-Id: Ieb422638446ef3a9357d59b2d279ee941367604d
Make metainfo.RSConfig a valid pflag config value. This allows us to
configure the RSConfig as a string like k/m/o/n-shareSize, which makes
having multiple supported RS schemes easier in the future.
RS-related config values that are no longer needed have been removed
(MinTotalThreshold, MaxTotalThreshold, MaxBufferMem, Verify).
Change-Id: I0178ae467dcf4375c504e7202f31443d627c15e1
* The audit worker wants to get items from the queue and process them.
* The audit chore wants to create new queues and swap them in when the
old queue has been processed.
This change adds a "Queues" struct which handles the concurrency
issues around the worker fetching a queue and the chore swapping a new
queue in. It simplifies the logic of the "Queue" struct to its bare
bones, so that it behaves like a normal queue with no need to understand
the details of swapping and worker/chore interactions.
Change-Id: Ic3689ede97a528e7590e98338cedddfa51794e1b
* Do not swap the active audit queue with the pending audit queue until
the active audit queue is empty.
* Do not begin creating a new pending audit queue until the existing
pending audit queue has been swapped to the active queue.
Change-Id: I81db5bfa01458edb8cdbe71f5baeebdcb1b94317
What:
Use the github.com/jackc/pgx postgresql driver in place of
github.com/lib/pq.
Why:
github.com/lib/pq has some problems with error handling and context
cancellations (i.e. it might even issue queries or DML statements more
than once! see https://github.com/lib/pq/issues/939). The
github.com/jackx/pgx library appears not to have these problems, and
also appears to be better engineered and implemented (in particular, it
doesn't use "exceptions by panic"). It should also give us some
performance improvements in some cases, and even more so if we can use
it directly instead of going through the database/sql layer.
Change-Id: Ia696d220f340a097dee9550a312d37de14ed2044
Sometimes nodes who have gracefully exited will still be holding pieces
according to the satellite. This has some unintended side effects
currently, such as nodes getting disqualified after having successfully
exited.
* When the audit reporter attempts to update node stats, do not update
stats (alpha, beta, suspension, disqualification) if the node has
finished graceful exit (audit/reporter_test.go TestGracefullyExitedNotUpdated)
* Treat gracefully exited nodes as "not reputable" so that the repairer
and checker do not count them as healthy (overlay/statdb_test.go
TestKnownUnreliableOrOffline, repair/repair_test.go
TestRepairGracefullyExited)
Change-Id: I1920d60dd35de5b2385a9b06989397628a2f1272
* Delete expired segments in expired segments service using metainfo
loop
* Add test to verify expired segments service deletes expired segments
* Ignore expired segments in checker observer
* Modify checker tests to verify that expired segments are ignored
* Ignore expired segments in segment repairer and drop from repair queue
* Add repair test to verify that a segment that expires after being
added to the repair queue is ignored and dropped from the repair queue
Change-Id: Ib2b0934db525fef58325583d2a7ca859b88ea60d
Add flag to satellite repairer, "InMemoryRepair" that allows the
satellite to decide whether to download the entire segment being
repaired into memory (this is what the satellite already does), or to
download it into temporary files on disk that will be read from in the
upload phase of repair.
This should help with handling high repair traffic on satellites that
cannot afford to spend 64mb of memory per repair worker.
Updates tests to test repair for both in memory and to disk.
Change-Id: Iddf591e165621497c98533d45bfea3c28b08a194
