It was surprising that `satellite auditor` complained about SMTP mail settings, even if it's not supposed to sending any mail.
Looks like we can remove the mail service dependency, as it's not a hard requirement for overlay.Service.
Change-Id: I29a52eeff3f967ddb2d74a09458dc0ee2f051bd7
I tried to configure a satellite service and got this error:
```
DEBUG process/exec_conf.go:408 Unrecoverable error {"error": "missing port in address"}
```
It took some time to realize that I forgot to set the SMTPServerAddress.
This patch makes it easier to detect similar problem (detailed error message), and makes SMTP parameters optional if no real mail sending is used (simulated or nomail)
Change-Id: I32535a7c8d6529e19e4d919806f42ba430d074a5
Up to now, we have been implementing the DistinctIP preference with code
in two places:
1. On check-in, the last_net is determined by taking the /24 or /64
(in ResolveIPAndNetwork()) and we store it with the node record.
2. On node selection, a preference parameter defines whether to return
results that are distinct on last_net.
It can be observed that we have never yet had the need to switch from
DistinctIP to !DistinctIP, or from !DistinctIP to DistinctIP, on the
same satellite, and we will probably never need to do so in an automated
way. It can also be observed that this arrangement makes tests more
complicated, because we often have to arrange for test nodes to have IP
addresses in different /24 networks (a particular pain on macOS).
Those two considerations, plus some pending work on the repair framework
that will make repair take last_net into consideration, motivate this
change.
With this change, in the #2 place, we will _always_ return results that
are distinct on last_net. We implement the DistinctIP preference, then,
by making the #1 place (ResolveIPAndNetwork()) more flexible. When
DistinctIP is enabled, last_net will be calculated as it was before. But
when DistinctIP is _off_, last_net can be the same as address (IP and
port). That will effectively implement !DistinctIP because every
record will have a distinct last_net already.
As a side effect, this flexibility will allow us to change the rules
about last_net construction arbitrarily. We can do tests where last_net
is set to the source IP, or to a /30 prefix, or a /16 prefix, etc., and
be able to exercise the production logic without requiring a virtual
network bridge.
This change should be safe to make without any migration code, because
all known production satellite deployments use DistinctIP, and the
associated last_net values will not change for them. They will only
change for satellites with !DistinctIP, which are mostly test
deployments that can be recreated trivially. For those satellites which
are both permanent and !DistinctIP, node selection will suddenly start
acting as though DistinctIP is enabled, until the operator runs a single
SQL update "UPDATE nodes SET last_net = last_ip_port". That can be done
either before or after deploying software with this change.
I also assert that this will not hurt performance for production
deployments. It's true that adding the distinct requirement to node
selection makes things a little slower, but the distinct requirement is
already present for all production deployments, and they will see no
change.
Refs: https://github.com/storj/storj/issues/5391
Change-Id: I0e7e92498c3da768df5b4d5fb213dcd2d4862924
Segments loop have build-in sanity check to verify if number of segments
processed by loop is roughly fine. We want to have the same verification
for ranged loop.
https://github.com/storj/storj/issues/5544
Change-Id: Ia19edc0fb4aa8dc45993498a8e6a4eb5928485e9
If the session_minutes column in user_settings is not null, use this
value to determine the expiration when creating or refreshing a session.
github issue: https://github.com/storj/storj/issues/5487
Change-Id: I1f777f7ffcd4018b0c40f0b26c8a50de85a31909
We should return public project id instead of regular one when quering project charges so that it is consistent on a client side.
This is a fix for an issue with displaying project name on a Billing screen.
Issue:
https://github.com/storj/storj/issues/5641
Change-Id: Ic0c544dbe7369aa88f3a7c97a2f5de5bc854e1fd
quic is still configurable based on the quic rollout
environment variables in storj.io/common. this stops
using a method removed in:
https://review.dev.storj.io/c/storj/uplink/+/9815
Change-Id: Ibfe28cfb19e5672630970b9e2c8c6ac0c98d4822
We decided to remove sanitizing dependency and restrict v-html with 2 exceptions for web/satellite (we control the content in those cases)
Issue:
https://github.com/storj/storj-private/issues/148
Change-Id: Ic6b2e894d20e7f0553f759ede51845a10831e890
Divide single error event into 2 separate events.
Those are list objects event and change route event.
Issue:
https://github.com/storj/storj-private/issues/164
Change-Id: I3efe0f2d14fceb5841b6d0ff6db685540351281a
We changed primary key for bucket_bandwidth_rollups table. Now we
need to do some cleanup in places like structs, sorting methods or SQL
queries.
Change-Id: Ida4f874f161356df193379a53507602e04db1668
Disable buckets checkbox if all buckets option is selected for new access grant flow.
This would disallow unchecking all buckets checkbox if none of the specific buckets is selected.
Change-Id: I81a9f03d49d2cde862fd0afbc2fde0abeb0b31ce
I use `uplink share` command but I always fail to set the --not-before parameter.
* Usually I try +2d when I see in the help that +2h is possible --> fail
* When it fails, I try to set explicit date, like 2012-12-23 --> fail
This patch makes it possible to use:
* day duration (like +3d)
* shorter date definition (like `2023-12-12` or `2023-12-12T12:40`)
Change-Id: I2243b36f59c8929eb0473c4bb4fed19220890c71
The tests were using global variables for keeping the mock state, which
was indexed by the satellite ID. However, the satellite ID-s are
deterministic and it's possible for two tests end up using the same
mocks.
Instead make the mock creation not depend on the satellite ID and
instead require it being configured via paymentsconfig.
This fixes TestAutoFreezeChore failure.
Change-Id: I531d3550a934fbb36cff2973be96fd43b7edc44a
In the past we set incorrect primary key for bucket_bandwidth_rollups
table and bucket name was first column of key instead of project id.
This change fixes this problem.
We will alter primary key manually for production satellites. That's
why migration code is checking if change was already applied.
https://github.com/storj/storj/issues/5332
Change-Id: I7dd555eb0c2f6fda1c90eaed08fa847b7f273bc7
The pricing plan selection step of the onboarding tour is skipped if
there are no pricing packages configured for a user's partner.
Change-Id: I14bacbfaa10acf4cb97db04724749111a73e3928
This change uses the corresponding icons for different types of files
in the file browser.
Issue: https://github.com/storj/storj/issues/5477
Change-Id: I8b10ac4ece03563a465c7823a1e7482244a324b9
An endpoint has been added that returns whether a pricing package is
available for a user to purchase. This will be used to conditionally
skip the pricing plan selection step of the onboarding tour.
Change-Id: I8c02a4e474e5f0f80778453b7daf674c8da64306
If a user changes password while a password recovery token exists,
delete the token so the reset password email doesn't work.
github issue: https://github.com/storj/storj-private/issues/149
Change-Id: Ibb0c13076e182c46501c1d7ac92d3fecc7d5ee58
This change adds a tag to the project dashboard indicating if the user
is the owner of the project.
It also adds the project limit notification to the all projects dashboard
Issue: https://github.com/storj/storj/issues/5485
Change-Id: Ie2f446966459c160408fb5614ac1701179092cd5
The content alignment of project items that have descriptions and those
that don't differ. This change fixes that. It also adds some text style
changes.
Change-Id: Ic7bb348bdafee463a00faec7faa7af2d814416f8
Add passphrase_prompt column to user_settings table to store a boolean
whether a user would like to be prompted to enter a passphrase when
entering a new project.
Issue https://github.com/storj/storj/issues/5613
Change-Id: I5d086df277aff458453343c7c38a379e7b1b8bf9
Earlier we made a change to not cancel flushing orders when flushing
was triggered by orders endpoint method but we missed a case
where it can be also triggered (and canceled) by metainfo endpoints
method. This change moves ignoring context cancellation deeper.
Change-Id: Id43176f552efc3167345783f73aab885411ac247
Right now there is a problem that we list objects inside object browser using Delimiter param which helps us to define if bucket includes folders.
If we set Delimiter to '/' then in response we get a list of plain objects called Contents and another list called CommonPrefixes which includes 'folder' keys.
So this approach makes it impossible to know the exact object count because we don't know a number of objects behind folder keys.
So to correctly calculate objects count we have to make another list request without Delimeter param.
By doing this we get a single Contents list which includes plain objects and objects containing folder Prefix.
Example of Contents response without Delimiter param:
['object', 'object1', 'folder/object2', 'folder1/object3']
Change-Id: Id23f26bed369d2063bdbae96e7d915168c6c9bdd
This change adds a new chore that will check for failed invoices and
potentially freeze corresponding accounts.
It makes slight modifications to stripemock.go and invoices.go (adding
stripe CustomerID to the Invoice struct).
Issue: https://github.com/storj/storj-private/issues/140
Change-Id: I161f4037881222003bd231559c75f43360509894
A pricing plan selection step for users with a recognized partner has
been added to the beginning of the onboarding tour. Once visited, users
have the option of purchasing the pricing plan associated with their
partner or proceeding as a paid or free tier user.
Resolves storj-private#118
Resolves storj-private#126
Change-Id: I3b423194d96deaf87cf9807a766bf4d04fbcf86d
Added extra step for new access grant flow where user can confirm all selected caveats (except passphrase).
Change-Id: I9ac603d588016f30a95d4b578b3752e256a496da
The project limit banner allows free tier users to upgrade, and paid
tier users to request limit increase when project limit is reached.
Issue: https://github.com/storj/storj/issues/5483
Change-Id: I44cca07bee99618adbc1c25b8e559e42a51a3b01
Refactored project level passphrase flow to work correctly with new access grant flow.
Now we don't generate edge credentials when project passphrase is set.
We set them only when they are needed (bucket is being opened or created).
Replaced edge credentials generation to vuex objects module to be single source of truth.
Change-Id: I2a11194fff5a63f7970f6df60db16ad6a1ac7c60
This change does the initial implementation of the all projects
dashboard. It is accessible on satelliteUrl/all-projects.
This change does not implement onboarding step for new accounts.
Issue: https://github.com/storj/storj/issues/5514
Change-Id: Ideadbe91e7ce523f77bde0dee53a7d35ba9f16e0
Storagenode download metrics are not accurate:
* the current metric bump cancel metrics only for specific error messages, but there are cases where the error is already handled (err == nill)
* instead of the full size of the piece we need to use the size of the downloaded bytes
Change-Id: I6ca75770e2d40bf514f5e273785c78e02968c919
This change just adds the components/changes needed by the all projects
dashboard.
Issue: https://github.com/storj/storj/issues/5514
Change-Id: Ie7926f563dd3eb47a56b234cfd004f5b69be00a8
