this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
it was noticed that if you had a long lived transaction A that
was blocking some other transaction B and A was being aborted
due to retriable errors, then transaction B was never given
priority. this was due to using savepoints to do lightweight
retries.
this behavior was problematic becaue we had some queries blocked
for over 16 hours, so this commit addresses the issue with two
prongs:
1. bound the amount of time we will retry a transaction
2. create new transactions when a retry is needed
the first ensures that we never wait for 16 hours, and the value
chosen is 10 minutes. that should be long enough for an ample
amount of retries for small queries, and huge queries probably
shouldn't be retried, even if possible: it's more preferrable to
find a way to make them smaller.
the second ensures that even in the case of retries, queries that
are blocked on the aborted transaction gain priority to run.
between those two changes, the maximum stall time due to retries
should be bounded to around 10 minutes.
Change-Id: Icf898501ef505a89738820a3fae2580988f9f5f4
This change updates the storagenode piecestore apis to expose access to
the full piece size stored on disk. Previously we only had access to
(and only kept a cache of) the content size used for all pieces. This
was inaccurate when reporting the amount of disk space used by nodes.
We now have access to the total content size, as well as the total disk
usage, of all pieces. The pieces cache also keeps a cache of the total
piece size along with the content size.
Change-Id: I4fffe7e1257e04c46021a2e37c5adc6fe69bee55
Replace all the remaining uses of sql.DB with tagsql.DB to
fix issues with context cancellation.
Introduce tagsql.Open which helps to get rid of all tagsql.Wrap-s.
Use tagsql in cockroachkv and postgreskv.
Change-Id: I8946d203341cb85a25976896fc7881e1f704e779
Migration step was closing a database that was used by
the migration itself. There is an active tranasction
over the database.
Instead of closing in the same transaction we can wait
until restart for the database cleanup.
Change-Id: Ic971d8cea81a3ab783f4a1bdc6357009c8b31386
Also added temporary types withRebind and withTagTx,
which will be later removed. Currently they help to avoid
changing the whole codebase at the same time.
Change-Id: I7f07ba8f4709a23a463bfa67464628665a05808f
for storagenode
Ensure that database schema matches latest test migration schema before
allowing the node to start up.
Ensure minimal read/write functionality for each storagenode database
before allowing the node to start up.
This will eliminate many unhandled audit errors we are seeing.
Change-Id: Ic0e628b04a9c35b7a8243f6a81d4683918170ba9
This reverts commit 8e242cd012.
Revert because lib/pq has known issues with context cancellation.
These issues need to be resolved before these changes can be merged.
Change-Id: I160af51dbc2d67c5449aafa406a403e5367bb555
this will allow for some nice runtime analysis down the road.
also, this allows for wrapping database handles in a way that
can interact with these contexts
requires https://review.dev.storj.io/c/storj/dbx/+/514
Change-Id: Ib087b7cd73296dd2c1e0331314da34d861f61d2b
This code needs to work against cockroachDB, so transactions must be retried
when a retryable error is returned. This change puts migrate
transactions into the dbutil.WithTx transactional helpers to achieve
this in the easiest way.
Change-Id: Ib930e82d55cb0257357a222ce9131e6e53372c03
* put TestCreateV0 back in StoreForTest
* avoid direct handles to V0 pieceinfo db
* type mismatch fix
* use storage.Blobs interface in store_test.go
..instead of filestore.Store. this will allow filestore.Store to become
unexported.
* unexport filestore.Store
rename it to blobStore. things should use the storage.Blobs interface
instead. changes in this commit are purely mechanical (made through the
"refactor" tool in Gocode followed by search/replace on the word "Store"
within the storage/filestore/ directory).
* kill filestore.StoreForTest
now that filestore.blobStore is unexported, there isn't a need for a
specialized wrapper type. this (not coincidentally) also makes it
possible for the WriterForFormatVersion() method on
storagenode/pieces.StoreForTest to work, without requiring everything to
wrap the store.blobs attribute in a filestore.StoreForTest, which was
impractical.
* storagenode/storagenodedb: Migrate to separate dbs
* storagenode/storagenodedb: Add migration to drop versions tables
* Put drop table statements into a transaction.
* Fix CI errors.
* Fix CI errors.
* Changes requested from PR feedback.
* storagenode/storagenodedb: fix tx commit
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* Split the info.db database into multiple DBs using Backup API.
* Remove location. Prev refactor assumed we would need this but don't.
* Added VACUUM to reclaim space after splitting storage node databases.
* Added unique names to SQLite3 connection hooks to fix testplanet.
* Moving DB closing to the migration step.
* Removing the closing of the versions DB. It's already getting closed.
* Swapping the database connection references on reconnect.
* Moved sqlite closing logic away from the boltdb closing logic.
* Moved sqlite closing logic away from the boltdb closing logic.
* Remove certificate and vouchers from DB split migration.
* Removed vouchers and bumped up the migration version.
* Use same constructor in tests for storage node databases.
* Use same constructor in tests for storage node databases.
* Adding method to access underlining SQL database connections and cleanup
* Adding logging for migration diagnostics.
* Moved migration closing database logic to minimize disk usage.
* Cleaning up error handling.
* Fix missing copyright.
* Fix linting error.
* Add test for migration 21 (#3012)
* Refactoring migration code into a nicer to use object.
* Refactoring migration code into a nicer to use object.
* Fixing broken migration test.
* Removed unnecessary code that is no longer needed now that we close DBs.
* Removed unnecessary code that is no longer needed now that we close DBs.
* Fixed bug where an invalid database path was being opened.
* Fixed linting errors.
* Renamed VersionsDB to LegacyInfoDB and refactored DB lookup keys.
* Renamed VersionsDB to LegacyInfoDB and refactored DB lookup keys.
* Fix migration test. NOTE: This change does not address new tables satellites and satellite_exit_progress
* Removing v22 migration to move into it's own PR.
* Removing v22 migration to move into it's own PR.
* Refactored schema, rebind and configure functions to be re-useable.
* Renamed LegacyInfoDB to DeprecatedInfoDB.
* Cleaned up closeDatabase function.
* Renamed storageNodeSQLDB to migratableDB.
* Switched from using errs.Combine() to errs.Group in closeDatabases func.
* Removed constructors from storage node data access objects.
* Reformatted usage of const.
* Fixed broken test snapshots.
* Fixed linting error.
* Rebasing changes against master.
* Added back withTx().
* Fix using new error type.
* Moving back database initialization back into the struct.
* Fix failing migration tests.
* Fix linting errors.
* Renamed database object names to be consistent.
* Fixing linting error in imports.
* Rebasing changes against master.
* Added back withTx().
* Fix using new error type.
* Moving back database initialization back into the struct.
* Fix failing migration tests.
* Fix linting errors.
* Renamed database object names to be consistent.
* Fixing linting error in imports.
* Adding missing change from merge.
* Fix error name.
Deprecate the pieceinfo database, and start storing piece info as a header to
piece files. Institute a "storage format version" concept allowing us to handle
pieces stored under multiple different types of storage. Add a piece_expirations
table which will still be used to track expiration times, so we can query it, but
which should be much smaller than the pieceinfo database would be for the
same number of pieces. (Only pieces with expiration times need to be stored in piece_expirations, and we don't need to store large byte blobs like the serialized
order limit, etc.) Use specialized names for accessing any functionality related
only to dealing with V0 pieces (e.g., `store.V0PieceInfo()`). Move SpaceUsed-
type functionality under the purview of the piece store. Add some generic
interfaces for traversing all blobs or all pieces. Add lots of tests.
* replace direct reference with an interface in various places
* hide piecePath
* ensure psserver tests don't use path
* ensure psserver tests don't use sql queries directly
