Firstly, this changes the repair functionality to return Canceled errors
when a repair is canceled during the Get phase. Previously, because we
do not track individual errors per piece, this would just show up as a
failure to download enough pieces to repair the segment, which would
cause the segment to be added to the IrreparableDB, which is entirely
unhelpful.
Then, ignore Canceled errors in the return value of the repair worker.
Apparently, when the worker returns an error, that makes Cobra exit the
program with a nonzero exit code, which causes some piece of our
deployment automation to freak out and page people. And when we ask the
repair worker to shut down, "canceled" errors are what we _expect_, not
an error case.
Change-Id: Ia3eb1c60a8d6ec5d09e7cef55dea523be28e8435
Old iterator returns object keys without prefixes, this helps to reduce
the bandwidth from the database. The endpoint also doesn't send the
prefixes.
Change-Id: I77d85dae671ee3a16abe75db14e19674e80abaf4
to metabase
* EncryptedMetainfoEncryptedKey added to CommitSegment and
UpdateMetadata request
* EncryptedMetainfoEncryptedKey returned with GetObject response and all
delete responses
* EncryptedMetainfoEncryptedKey returned with object iterator results
Change-Id: I917541ab5f3e1863bc8f238d17a15fbf72a23025
We plan to add support for a new Reed-Solomon scheme soon, but our
repair queue orders segments by least number of healthy pieces first.
With a second RS scheme, fewer healthy pieces will not necessarily
correlate to lower health.
This change just adds the new column in a migration. A separate change
will add the new health function.
Right now, since we only support one RS scheme, behavior will not
change. Number of healthy pieces is being inserted as "segment health"
until the new health function is merged.
Segment health is calculated with a new priority function created in
commit 3e5640359. In order to use the function, a new config value is
added, called NodeFailureRate, representing the approximate probability
of any individual node going down in the duration of one checker run.
Change-Id: I51c4202203faf52528d923befbe886dbf86d02f2
It turns out we need to make 2 more changes in order for the new order submission phase 3 to get deployed.
This PR makes 2 changes:
1) when the rollup service deletes tallies, we now keep tallies around until orders expire (vs 1 day like before).
2) the reported rollup chore will now write the storagenode_bandwidth_rollups to a new table _phase2 as an intermediary step so it doesn't conflict with phase 3 order settlement.
These changes need to be deployed for 2 days before we can turn on phase 3 of the new orders settlement workflow.
Change-Id: Iafbff577ba7d55f8f17b7db857311b2ce799de60
The current monkit reporting for "remote_segments_lost" is not usable for
triggering alerts, as it has reported no data. To allow alerting, two new
metrics "checker_segments_below_min_req" and "repairer_segments_below_min_req"
will increment by zero on each segment unless it is below the minimum
required piece count. The two metrics report what is found by the checker
and the repairer respectively.
Change-Id: I98a68bb189eaf68a833d25cf5db9e68df535b9d7
This change is adjusting metainfo endpoint to use metabase for uploading
and downloading remote objects. Inline segments will be added later.
Change-Id: I109d45bf644cd48096c47361043ebd8dfeaea0f3
This PR does the following three things:
1. Defines a high-level interface for this wasm package
- All return value from this package will be wrapped with an
result object that contains a value field and an error field
2. Exposes two new functions to allow users to add permissions for a
given API key
- newPermission()
- setAPIKeyPermission()
3. Adds API documentation for the newly added API functions
Change-Id: Id995189702b369bba18fa344bef4ddfb0f3f1f44
While resolving conflicts with `master` I missed this change which is
needed e.g. to run storj-sim.
Change-Id: I56a548ed92b978510526c26c81af03051acfde2f
Make metainfo.RSConfig a valid pflag config value. This allows us to
configure the RSConfig as a string like k/m/o/n-shareSize, which makes
having multiple supported RS schemes easier in the future.
RS-related config values that are no longer needed have been removed
(MinTotalThreshold, MaxTotalThreshold, MaxBufferMem, Verify).
Change-Id: I0178ae467dcf4375c504e7202f31443d627c15e1
A change was made to use a metabase.SegmentKey (a byte slice alias)
as the last seen item to iterate through the irreparable DB in a
for loop. However, this SegmentKey was not initialized, thus it was
nil. This caused the DB query to return nothing, and healthy segments
could not be cleaned out of the irreparable DB.
Change-Id: Idb30d6fef6113a30a27158d548f62c7443e65a81
WHAT:
change user's email endpoint and appropriate service method was implemented
WHY:
make it possible to change user's email for temporary filezilla account
Change-Id: Ieea41bf49819a42b5f433e8dfaeec24c6d5ddc9f
Storage nodes undergoing Graceful Exit have up to now been receiving
hostnames for all other storage nodes they need to contact when
transferring pieces. This adds up to a lot of DNS lookups, which
apparently overwhelm some home routers. There does not seem to be any
need for us to send hostnames for graceful exit as opposed to IP
addresses; we already use IP addresses (as given by the last_ip_port
column in the nodes table) for all the GET and PUT orders we send out.
This change causes IP addresses to be used instead.
I started trying to construct a test to ensure that the behavior
changed, but it was rabbit-holing, so I've begun to feel that maybe this
change doesn't require one; it is a very simple change, and very much of
the same nature as what we already do for IPs in CreateGetOrderLimits
and CreatePutOrderLimits (and others).
Change-Id: Ib2b5ffe7a9310e9cdbe7464450cc7c934fa229a1
With the new overlay.AuditOutcome type for offline audits, the
IsUp field is redundant. If AuditOutcome != AuditOffline, then
the node is online.
In addition to removing the field itself, other changes needed
to be made regarding the relationship between 'uptime' and 'audits'.
Previously, uptime and audit outcome were completely separated. For
example, it was possible to update a node's stats to give it a
successful/failed/unknown audit while simultaneously indicating that
the node was offline by setting IsUp to false. This is no longer possible
under this changeset. Some test which did this have been changed slightly
in order to pass.
Also add new benchmarks for UpdateStats and BatchUpdateStats with different
audit outcomes.
Change-Id: I998892d615850b1f138dc62f9b050f720ea0926b
After moving SatStreamID and SatSegmentID from common I missed changing
some methods in metainfo endpoint. This change is a fix for that.
Change-Id: I34e121fce47371ee4cfd92cce03809520b68859f
After moving SatStreamID and SatSegmentID from common I missed changing
some methods in metainfo endpoint. This change is a fix for that.
Change-Id: I3344623dc7acfa73db6c20cd3212301e74335857
We have some types that are only valid for satellite usage. Such types
are SatStreamID and SatSegmentID. This change moves those types to
storj/storj and adds basic infrastructure for generating code.
Change-Id: I1e643844f947ce06b13e51ff16b7e671267cea64
Some of metainfo endpoint methods are not used but we still have
implementation there. This change removes unused code and returns
unimplemented error for those methods.
Change-Id: I74e75e0caff76a4f5d119ee989b687b4e9d6e6f9
This change removed unused 'createRequests' struct. As far I remember it
was used to help validating old metainfo beginObject/commitObject flow.
Change-Id: I0f139b9934196d73f26eafa347ba5605722f3a55
As part of the Metainfo Refactoring, we need to make the Metainfo Loop
working with both the current PointerDB and the new Metabase. Thus, the
Metainfo Loop should pass to the Observer interface more specific Object
and Segment types instead of pb.Pointer.
After this change, there are still a couple of use cases that require
access to the pb.Pointer (hence we have it as a field in the
metainfo.Segment type):
1. Expired Deletion Service
2. Repair Service
It would require additional refactoring in these two services before we
are able to clean this.
Change-Id: Ib3eb6b7507ed89d5ba745ffbb6b37524ef10ed9f
- Remove flag for switching off offline audit reporting.
- Change the overlay method used from UpdateUptime to BatchUpdateStats, as this
is where the new online scoring is done.
- Add a new overlay.AuditOutcome type: AuditOffline. Since we now use the same
method to record offline audits as success, failure, and unknown, we need to
distinguish offline audits from the rest.
Change-Id: Iadcfe10cf13466fa1a1c2dc542db8994a6423355
This fixes a slow query that was taking up to 4 seconds in production
SELECT node_id, path, piece_num, root_piece_id, durability_ratio, queued_at, requested_at, last_failed_at, last_failed_code, failed_count, finished_at, order_limit_send_count
FROM graceful_exit_transfer_queue
WHERE node_id = '[redacted]'
AND finished_at is NULL
AND last_failed_at is NULL
ORDER BY durability_ratio asc, queued_at asc LIMIT 300 OFFSET 0;
Change-Id: Ib89743ca35f1d8d0a1456b20fa08c683ebdc1549
Fix the DeleteAccount handler to return 501 HTTP status code because
it's what corresponds for a "Not Implemented" status.
Add a black box test for the DeleteAccount to ensure that always return
an error response because, at this time, we don't allow to delete
accounts through the API.
This test was not added to the corresponding commit
https://review.dev.storj.io/c/storj/storj/+/2712 due to the rush to
fix it.
Change-Id: Ibcf09e2ec52f182a8a580d606c457328d94c8b60
A year ago we made the audit service deleting expired segments.
Meanwhile, we introduced an expired deletetion sub-service in the
metainfo service which sole purpose is deleting expired segments.
Therefore, now we are removing this responsibility from the audit
service. It will continue to avoid reporting failures on expired
segments, but it would not delete them anymore.
We do this to cleanup responsibilities in advance of the metainfo
refactoring.
Change-Id: Id7aab2126f9289dbb5b0bdf7331ba7a3328730e4
In production we are seeing ~115 storage nodes (out of ~6,500) are not using the new SettlementWithWindow endpoint (but they are upgraded to > v1.12).
We analyzed data being reported by monkit for the nodes who were above version 1.11 but were not successfully submitting orders to the new endpoint.
The nodes fell into a few categories:
1. Always fail to list orders from the db; never get to try sending orders from the filestore
2. Successfully list/send orders from the db; never get to calling satellite endpoint for submitting filestore orders
3. Successfully list/send orders from the db; successfully list filestore orders, but satellite endpoint fails (with "unauthenticated" drpc error)
The code change here add the following to address these issues:
- modify the query for ordersDB.listUnsentBySatellite so that we no longer select expired orders from the unsent_orders table
- always process any orders that are in the ordersDB and also any orders stored in the filestore
- add monkit monitoring to filestore.ListUnsentBySatellite so that we can see the failures/successes
Change-Id: I0b473e5d75252e7ab5fa6b5c204ed260ab5094ec
This preserves the last_ip_and_port field from node lookups through
CreateAuditOrderLimits() and CreateAuditOrderLimit(), so that later
calls to (*Verifier).GetShare() can try to use that IP and port. If a
connection to the given IP and port cannot be made, or the connection
cannot be verified and secured with the target node identity, an
attempt is made to connect to the original node address instead.
A similar change is not necessary to the other Create*OrderLimits
functions, because they already replace node addresses with the cached
IP and port as appropriate. We might want to consider making a similar
change to CreateGetRepairOrderLimits(), though.
The audit situation is unique because the ramifications are especially
powerful when we get the address wrong. Failing a single audit can have
a heavy cost to a storage node. We need to make extra effort in order
to avoid imposing that cost unfairly.
Situation 1: If an audit fails because the repair worker failed to make
a DNS query (which might well be the fault on the satellite side), and
we have last_ip_and_port information available for the target node, it
would be unfair not to try connecting to that last_ip_and_port address.
Situation 2: If a node has changed addresses recently and the operator
correctly changed its DNS entry, but we don't bother querying DNS, it
would be unfair to penalize the node for our failure to connect to it.
So the audit worker must try both last_ip_and_port _and_ the node
address as supplied by the SNO.
We elect here to try last_ip_and_port first, on the grounds that (a) it
is expected to work in the large majority of cases, and (b) there
should not be any security concerns with connecting to an out-or-date
address, and (c) avoiding DNS queries on the satellite side helps
alleviate satellite operational load.
Change-Id: I9bf6c6c79866d879adecac6144a6c346f4f61200
This change allows the creation and deletion of api keys via the admin API.
It adds two methods for deletion, one via the name and projectID and the
second one via the serialized apikey directly.
Change-Id: Ida8aa729e716db58c671a901e5f7e39253e89a0d
We are moving an error into rejectErr since its preventing storage nodes from being able to settle other orders.
Change-Id: I3ac97c340e491b127f5e0024c5e8bd9f4df8d5c3
Use tagsql.DB pointer as step database, to propagate changes
back and forth between actual database and migration.
Adds CreateDB operation to the migration step to be able to
create new dbs before executing migration action.
Adjusts storagenode database migration to use inner tagsql.DB
pointer of each database as step.DB.
Adjusts satellite dabase migration, adds proxy migrationDB field
to satellite db that wraps itself as tagsql.DB, pointer of which
is used as step.DB.
Change-Id: Ifed4de5b01a356cf7b37db64d2eaeb7b61982c5c
This change completes the column migration of
5f6fccc6e8 and
2f648fd981.
It resets every users project limits who are below or equal to our
current production defaults.
Change-Id: Ie041d08bb67b62844f6023190fc00bc2dad5b1cb
WHAT:
Now project amount limit is taken from users db instead of config. But if db value is 0 then default config value will be used instead.
WHY:
this will allow us to change user's project limit by changing db value.
Change-Id: I9edcd0bf9eaae5fe40e90a44cac82d9ce8519274
This makes it possible to remove of this obsolete flag from the
multi-tenant gateway.
As a consequence, displaying the GATEWAY_0_ACCESS env var will always
require a running storj-sim. Until now, it was required only the first
time. Then the value was stored in the 'access' config. But this is now
not possible anymore.
The changes in StripeMock are required to fix failures in integration
tests. StripeMock is in-memory and its data does not survive restarts of
storj-sim. The second and following starts of storj-sim had invalid
state of StripeMock, which failed requests that were required to
populate the GATEWAY_0_ACCESS env var. The changes in StripeMock makes
it repopulate the Stripe customers from the database.
Change-Id: I981a208172b76577f12ecdaae485f5ae4ea269bc
The same was that our Admin API handles project and account deletions currently, we would like
to have the same checks on the user-facing API. This PR adds the same checks to the console service.
General more applicable checks have been moved directly into the payments service.
In addition it adds the BucketsDB to the console DB, to have easier access and avoiding import cycles with
the metainfo package.
A small cleanup around our unnecessary monkit imports made it in as well.
Change-Id: I8769b01c2271c1687fbd2269a738a41764216e51
holding it during node i/o means slow nodes can hold up order
processing for everyone else. this dramatically increases
the amount of tiem spent handling orders.
Change-Id: Iec999b7ed0817c921a0fd039097a75bdd3c70ea2
Doing it at the ProcessOrders level was insufficient: the endpoints
make multiple database calls. It was a misguided attempt to only
have one spot enter the semaphore. By putting it in the endpoint
we can not only be sure that the concurrency is correctly limited
but it can be configurable easily.
Change-Id: I937149dd077adf9eb87fce52a1a17dc0afe96f64
we have thundering herds of order submissions that take all of the
database connections causing temporary periodic outages. limit
the amount of concurrent order processing to 2.
Change-Id: If3f86cdbd21085a4414c2ff17d9ef6d8839a6c2b
Adds membership checks for the following calls:
- GetProject
Add ownership checks for the following calls:
- DeleteProject
It also disables the API endpoint to delete a project.
Furthermore it adds tests for the console service.
Change-Id: I1ffc8dcb44746a74ad06a7dbd064a29c57c25272
The VerifyPieceHashes method has a sanity check for the number pieces to
be removed from the pointer after the audit for verifying the piece
hashes.
This sanity check failed when we executed the command on the production
satellites because the Verify command removes Fails and PendingAudits
nodes from the audit report if piece_hashes_verified = false.
A new temporary UsedToVerifyPieceHashes flag is added to
audits.Verifier. It is set to true only by the verify-piece-hashes
command. If the flag is true then the Verify method will always include
Fails and PendingAudits nodes in the report.
Test case is added to cover this use case.
Change-Id: I2c7cb6b12029d52b2fc565365eee0826c3de6ee8
To avoid further name collisions, the very broad named package gets moved into
the consoleauth package where its also mainly being used.
Change-Id: Ie563c9700adbf0553baca2b7b8ba4a1d9c29d144
This change adds the capabilities to adjust the users project limit via the Admin API.
Adds a test for the new added function of the API and updates the existing tests.
It renames the json field on the user struct to be more consistent.
Change-Id: I9018acd80dae0af68d1d50526f20987132c654f3
Previously if a node did not have audit history data for each of the
windows over the tracking period, we would give them the benefit of
the doubt and set their score to 1. This was to prevent nodes from
being suspended right out the gate. We need a minimum amount of data
to evaluate them.
However, a node who is actually failing at being online will have no
idea until they have received enough audits and we suspend them.
Instead, we will always use their real score, but use a flag to determine
whether they are eligible for suspension/dq.
Change-Id: I382218f12e8770f95d4bcddcf101ef348940cadf
Repair workers prioritize the most unhealthy segments. This has the consequence that when we
finally begin to reach the end of the queue, a good portion of the remaining segments are
healthy again as their nodes have come back online. This makes it appear that there are more
injured segments than there actually are.
solution:
Any time the checker observes an injured segment it inserts it into the repair queue or
updates it if it already exists. Therefore, we can determine which segments are no longer
injured if they were not inserted or updated by the last checker iteration. To do this we
add a new column to the injured segments table, updated_at, which is set to the current time
when a segment is inserted or updated. At the end of the checker iteration, we can delete any
items where updated_at < checker start.
Change-Id: I76a98487a4a845fab2fbc677638a732a95057a94
Jira: https://storjlabs.atlassian.net/browse/PG-69
There are a number of segments with piece_hashes_verified = false in
their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. Most probably, this happened due to a bug we had in the
past. We want to verify them before executing the main migration to
metabase. This would simplify the main migration to metabase with one
less issue to think about.
Change-Id: I8831af1a254c560d45bb87d7104e49abd8242236
We have configlock_test for checking changes so the separate script and
makefile target are not needed.
Change-Id: I2bbc1c21ad849c9b7ec8bba43c0e11e94e04f6a6
Currently Cockroach migration test is the most heavy with regards to
schema changes. This causes other tests to time out. This adds an
alternate cockroach instance that is used for migration tests.
Change-Id: I01fe9313527ff002f0bb0914dd52c3645b8eaf6d
Currently a user is only able to create a project if either
a STORJ deposit or CC was added to his account. With this change, an existing
coupon is also valid to let the user proceed.
Change-Id: I7be8d2d9ec58a15c50755b3fe33af04d2fd64ea2
This PR adds the following items:
1) an in-memory read-only cache thats stores project limit info for projectIDs
This cache is stored in-memory since this is expected to be a small amount of data. In this implementation we are only storing in the cache projects that have been accessed. Currently for the largest Satellite (eu-west) there is about 4500 total projects. So storing the storage limit (int64) and the bandwidth limit (int64), this would end up being about 200kb (including the 32 byte project ID) if all 4500 projectIDs were in the cache. So this all fits in memory for the time being. At some point it may not as usage grows, but that seems years out.
The cache is a read only cache. When requests come in to upload/download a file, we will read from the cache what the current limits are for that project. If the cache does not contain the projectID, it will get the info from the database (satellitedb project table), then add it to the cache.
The only time the values in the cache are modified is when either a) the project ID is not in the cache, or b) the item in the cache has expired (default 10mins), then the data gets refreshed out of the database. This occurs by default every 10 mins. This means that if we update the usage limits in the database, that change might not show up in the cache for 10 mins which mean it will not be reflected to limit end users uploading/downloading files for that time period..
Change-Id: I3fd7056cf963676009834fcbcf9c4a0922ca4a8f
Our current endpoints bail on us, if the column data is null. Thus we need
to take the intermediate step and set the default to a fixed value and
reset those with the following release.
It sets the default column value to our current config values of 50GB
for storage and bandwidth and 100 buckets, while still enabling the field to be nullable.
All 0 values are migrated to be the default as well to ensure they can
keep using their projects, as with the original change, 0 actually means 0.
Change-Id: I797be80ce2d2105091599dc1b3fc76f74336b66b
Currently we have no way to actually set one
of the following limits to 0 (meaning not usable):
- maxBuckets
- usageLimit
- bandwidthLimit
With having the field nullable,
NULL corresponds to the global default,
0 now actually 0 and
a set value determines a custom limit.
Change-Id: I92bb77529dcbd0881ae8368921be9d246eb0919e
Jira: https://storjlabs.atlassian.net/browse/PG-67
There are a number of old-style objects (without the number of segments
in their metadata) on US-Central-1, Europe-West-1, and Asia-East-1
satellites. We want to migrate their metadata to contain the number of
segments before executing the main migration to metabase. This would
simplify the main migration to metabase with one less issue to think
about.
Change-Id: I42497ae0375b5eb972aab08c700048b9a93bb18f
WHAT:
added functionality for user to update project name. Logic only, without actual GUI updates.
WHY:
better user experience
Change-Id: I1e38e33ba827b0bdf2c89e29de24e4e87edb474a
nodes are submitting using both the legacy and windowed endpoints
and thus having their legacy submissions rejected.
it is legal to use both the legacy and windowed endpoints
in phase1 since they use the same backend. the legacy endpoint
is disabled in phase2 and phase3.
therefore, if we wait an order expiration period (2 days) after
we determine enough nodes have started using the windowed
endpoint, we can be sure that any orders they did have to
submit with the legacy endpoint will have expired.
Change-Id: I4418a881bf8bb9377efaef4c651e6103a5dc6ed0
Another change which is a part of refactoring to replace path parameter
(string/[]byte) with key paramter (metabase.SegmentKey)
Change-Id: I617878442442e5d59bbe5c995f913c3c93c16928
objectdeletion.ObjectIdentifier with metabase.ObjectLocation
Another change to use metabase.ObjectLocation across satellite codebase
to avoid duplication and provide better type safety.
Change-Id: I82cb52b94a9107ed3144255a6ef4ad9f3fc1ca63
WHAT:
notification bar added to project dashboard page. It is shown when projects count limit is reached.
Create project button is removed after creating last available project
WHY:
inform user that their projects count limit was reached
Change-Id: If0d67148003be40cc9eb4d8b25cc17f8204008d4
Additionally, this PR changes NewNodeFraction devDefault and testplanet config from 0.05 to 1.
This is because many tests relied on selecting nodes that were reputable based on audit and uptime
counts of 0, in effect, selecting new nodes as reputable ones.
However, since reputation is now indicated by a vetted_at db field that is explicitly set
rather than implied by audit and uptime counts, it would be more complicated to try to
update all of the nodes' reputations before selecting nodes for tests.
Now we just allow all test nodes to be new if needed.
Change-Id: Ib9531be77408662315b948fd029cee925ed2ca1d
metabaseSegmentKey` TransferQueueItem
We are unifying which name (and type) we are using for value we are
using to point to segment. We want to use `key` instead of `path`.
Dedicated type `metabase.SegmentKey` was created for this purposes also.
This change is doing refactoring around gracefulexit.
Change-Id: I90d51ff087b206179e61d5f1bc95f4709d76f917
This PR updates `uplink rb --force` command to use the new libuplink API
`DeleteBucketWithObjects`.
It also updates `DeleteBucket` endpoint to return a specific error
message when a given bucket has concurrent writes while being deleted.
Change-Id: Ic9593d55b0c27b26cd8966dd1bc8cd1e02a6666e
This PR fixes a deadlock that can happen when the number of piece
deletion requests is different from the distinct node count from those
requests. The success threshold should be based on the number of nodes
instead of the amount of requests
Change-Id: I83073a22eb1e111be1e27641cebcefecdc16afcb
This change forces the test of GetObjectIPs to use multiple remote
segments (earlier versions of the test were accidentally using inline
segments). This change also revealed a small bug in the for loop code,
which is fixed.
Change-Id: Ic486b079d221952ba13553acf0ca41a8873f3f21
* The audit worker wants to get items from the queue and process them.
* The audit chore wants to create new queues and swap them in when the
old queue has been processed.
This change adds a "Queues" struct which handles the concurrency
issues around the worker fetching a queue and the chore swapping a new
queue in. It simplifies the logic of the "Queue" struct to its bare
bones, so that it behaves like a normal queue with no need to understand
the details of swapping and worker/chore interactions.
Change-Id: Ic3689ede97a528e7590e98338cedddfa51794e1b
Add online score used for the new audit history offline tracking system
to the nodes table. This allows us easy access to the node's online
score for the storagenode dashboard as well as for data analysis.
Change-Id: Ie99be1192e5236862a5b3dbed2e5ef03b9169410
We were seeing error on the last day of the month with TestProjectAllocatedBandwidthRetainTwo.
This is due to AddDate normalizes its result in the same way that Date does, so, for example,
adding one month to October 31 yields December 1, the normalized form for November 31."
I also fixed a minor UTC issue with this test as well.
Change-Id: I0157873e7befa57810e5f264a922b188890fa46a
satellite.DB.Console().Projects().GetAll database query
can be replaced with planet.Uplinks[0].Projects[0].ID
Change-Id: I73b82b91afb2dde7b690917345b798f9d81f6831
When a node's audit history "online score" passes below a configured
threshold, the node goes into "offline suspension" mode and begins a
review period, where the operator is given an opportunity to bring their
node back online.
After the review period passes, offline suspension is turned off for the
node.
In the future, if a node still has a bad online score at the end of the
review period, it will be disqualified. This is disabled right now.
In the future, if a node is in offline suspension, it will be treated as
"unhealthy". Right now, there are no consequences for being in offline
suspension.
Minor changes:
* Moves AuditHistoryConfig out of UpdateStats/BatchUpdateStats args and
into UpdateRequest.
* Adds "now" argument to UpdateStats/BatchUpdateStats args for easy
testing.
* Changes formatting strings inside buildUpdateStatement to use specific
types.
Change-Id: I032b60298840fc16e6ef831da750f2d57619a397
Currently there is confusion between responsibilities of
metainfo.Endpoint, metainfo.Service, PointerDB.
By separating database "service" into a separate package and
its types allows to disentagle them.
This gives us responsibilities:
1. metainfo.Endpoint - translates requests and permissions
2. metainfo.Service - handles requests and coordinates with
objectdeletion, piecedeletion, metabase
3. metabase.Service - communication with the database interface and invariants
Currently metabase will contain the types necessary to coordinate
information.
Change-Id: If8c992b4b9d9e70a56bbd8a378a5af6b1a2ec34e
Jenkins has been failing a lot lately due to test timeouts with CockroachDB.
TestMigrateCockroach previously took around 5 minutes, now it takes 2.
Why 103? I couldn't get 100 to work due to an error w/ NOT NULL and PKs.
Change-Id: Iec95d4e25f9d6cd36920e7f43272c486a17fa879
TestMaxOutBuckets is one of our slower tests (50-90s).
This change seems to make it 2-12s.
It reduces the number of buckets that need to be created.
It also removes unnecessary storage nodes.
Change-Id: I1012fc6e9258b2f7674b16da4e8b418741c93eea
If a segment is deleted, is modified, or expires during an audit, this
is not problematic, so we should not return errors. Functionally,
nothing changes, but our metrics around audit success rate will be
improved after this change.
Change-Id: Ic11df056b2c73894b67a55894bd4d58c00470606
This PR changes DeleteBucket to be able to delete all objects within a
bucket if `DeleteAll` is set in `BucketDeleteRequest`.
It also changes `DeleteBucket` API to treat `ErrBucketNotFound` as a
successful delete operation instead of returning an error back to the
client.
Change-Id: I3a22c16224c7894f2d0c2a40ba1ae8717fa1005f
Add a function to the overlay cache called UpdateAuditHistory, which
allows us to add online or offline audits to a particular node's audit
history, and get that node's "online score" for the configured tracking
period.
The next step will be to use UpdateAuditHistory from inside
BatchUpdateStats/UpdateStats, so that audit history is actually updated
when nodes get audited, and we can suspend nodes based on their online
score.
Change-Id: I2289105e6961e68e829a987ff756b0e576fab120
This change accomplishes multiple things:
1. Instead of having a max in flight time, which means
we effectively have a minimum bandwidth for uploads
and downloads, we keep track of what windows have
active requests happening in them.
2. We don't double check when we save the order to see if it
is too old: by then, it's too late. A malicious uplink
could just submit orders outside of the grace window and
receive all the data, but the node would just not commit
it, so the uplink gets free traffic. Because the endpoints
also check for the order being too old, this would be a
very tight race that depends on knowledge of the node system
clock, but best to not have the race exist. Instead, we piggy
back off of the in flight tracking and do the check when
we start to handle the order, and commit at the end.
3. Change the functions that send orders and list unsent
orders to accept a time at which that operation is
happening. This way, in tests, we can pretend we're
listing or sending far into the future after the windows
are available to send, rather than exposing test functions
to modify internal state about the grace period to get
the desired effect. This brings tests closer to actual
usage in production.
4. Change the calculation for if an order is allowed to be
enqueued due to the grace period to just look at the
order creation time, rather than some computation involving
the window it will be in. In this way, you can easily
answer the question of "will this order be accepted?" by
asking "is it older than X?" where X is the grace period.
5. Increases the frequency we check to send up orders to once
every 5 minutes instead of once every hour because we already
have hour-long buffering due to the windows. This decreases
the maximum latency that an order will be reported back to
the satellite by 55 minutes.
Change-Id: Ie08b90d139d45ee89b82347e191a2f8db1b88036
services
This PR adds a limiter on the amount of concurrent objects deletion can be handled so
we don't run out of memory.
Change-Id: Id2ce368af6f86845fcdfd34cb2f5e460efe9b272
* Add all new orders to the orders filestore instead of the database.
* Submit orders from the filestore to the new satellite SettleWindow
endpoint.
The orders filestore will eventually replace the orders DB completely.
For now, we will still be checking the orders DB and submitting those
orders if they exist. In a later release, we will completely remove the
orders DB, but we need both the DB and filestore for the transitionary
period.
Change-Id: Iac8780fd5ab770296181bbd313e1d335f072d4dc
This change will require less work for the user of peiecedeletion
service by moving overlay database call into the package.
Change-Id: I14a150ab71fe885780e7a7a74db006a779507ae5
This adds the unimplemented GetObjectIPs method to metainfo endpoint so
we can import new common protobuf definitions.
Change-Id: I154f26baccb6bb3c66de3eb25611930545c9754b
When investigating a gap in storage usage data in the SN dashboard, I noticed that there were 2 entries in the accounting_rollups table on the date of the gap.
This change accounts for multiple entries in the accounting_rollups table for a given day.
Change-Id: Ibf2b5d0455117cb0417163e8fcfb7e509d594171
It's an obsolete table from earlier state of Stripe invoices
implementation. No code is currently using it. It is confirmed that this
table is currently empty across all satellites.
Change-Id: I12d2756578faf8418ea8f3b09088e885694b8925
Small extension to test case where another partner is upload/downloading
to/from the same bucket as partner which creates this bucket.
Change-Id: Ib674fe5f95f868b71341e30aba5e2440847738f4
Use new objectdeletion package for deleting pointers.
In the best case scenario, it will make on database call to fetch
information about the number of segments. And another request to delete
and fetch information about other segments.
This PR also changes our object deletion API to return no error when an
object is not found but instead consider such operation as success. This
behavior is asligned with S3 API and makes the code less complex.
Change-Id: I280c56e8b5d815a8c4dafe8227689467e899775a
Adds AuditHistory{WindowSize, TrackingPeriod, GracePeriod,
OfflineThreshold}. These values will be used to track offline audits over
time, and to suspend/disqualify nodes for being offline for too long.
Change-Id: I05f7dbc3c034bdc53c4fbd7719c71a44f37ec6a5
This change removes the overlay function FindStorageNodesForRepair,
which skips using the node selection cache and hits the database
directly. Otherwise, it is functionally identical to
FindStorageNodesForUpload, which checks the node selection cache first.
When selecting nodes for PUT_REPAIRs, we now call
FindStorageNodesForUpload instead of FindStorageNodesForRepair to reduce
database load.
Change-Id: If34e109695b2ed2b8fb6759115bf769a3459684e
This adds a config flag orders.window-endpoint-rollout-phase
that can take on the values phase1, phase2 or phase3.
In phase1, the current orders endpoint continues to work as
usual, and the windowed orders endpoint uses the same backend
as the current one (but also does a bit extra).
In phase2, the current orders endpoint is disabled and the
windowed orders endpoint continues to use the same backend.
In phase3, the current orders endpoint is still disabled and
the windowed orders endpoint uses the new backend that requires
much less database traffic and state.
The intention is to deploy in phase1, roll out code to nodes
to have them use the windowed endpoint, switch to phase2, wait
a couple days for all existing orders to expire, then switch
to phase3.
Additionally, it fixes a bug where a node could submit a bunch
of orders and rack up charges for a bucket.
Change-Id: Ifdc10e09ae1645159cbec7ace687dcb2d594c76d
Jira: https://storjlabs.atlassian.net/browse/USR-822
This the last step of dropping these 2 db tables. It also deletes all
code associate with them.
Change-Id: I8be840dc2a7be255cf6308c9434b729fe4d9391e
* Do not swap the active audit queue with the pending audit queue until
the active audit queue is empty.
* Do not begin creating a new pending audit queue until the existing
pending audit queue has been swapped to the active queue.
Change-Id: I81db5bfa01458edb8cdbe71f5baeebdcb1b94317
Add a config so that some percent of users require credit cards /
account balances
in order to create a project or have a promotional coupon applied
UI was updated to match needed paywall status
At this point we decided not to use a field to store if a user is in an
A/B
test, and instead just use math to see if they're in a test. We decided
to use MD5 (because its in Postgres too) and User UUID for that math.
Change-Id: I0fcd80707dc29afc668632d078e1b5a7a24f3bb3
It feels weird having a repairer configuration part of order services.
Let's have a single source of truth for it.
Change-Id: I24f7c897aec80f3293f8af24876cbb6733d85a0b
Inside CreateGetRepairOrderLimits we pass in a list of healthy pieces,
but when we query node info from this list we apply the "reliable" filter
again. We sometimes end up with nodes which at first were healthy, but then
became unhealthy, and thus can be repaired, but we do not update the 'unhealthyPieces'
list with these nodes.
This causes an error, 'piece to add already exists', as we fail to remove these
pieces from the pointer before replacing them with repaired pieces.
Change-Id: I6e2445f342ac117ded30351fa7e5e523c9ec26bd
Jira: https://storjlabs.atlassian.net/browse/USR-822
The balance history in Satellite GUI display the deposit bonuses as
separate rows. These bonuses used to be stored in the satellite DB. We
recently started depositing the bonus directly to the Stripe balance and
migrated old bonuses to Stripe metadata.
This change displays all billing history entirely from Stripe, so we can
remove the `credits` and `credits_spendings` DB tables in a next step.
Change-Id: I14c304c66ec47c6a51f5b8508f11470cf36c4e24
There's still a possibility of tests clashing due to the shared mock,
however it's slightly better, because it avoids the race.
Change-Id: I80eedf1ca50b6114ebe69ea3c4d61176452f4df0
Removes old project_bandwidth_rollups records that are no longer used.
Uses a retain months configuration to determine how many months to save. Current month cannot be removed.
Tests retainMonths=-1, 0, 2
Change-Id: Ia4be2546cdb28802427acf41ecd85ad66df3e62c
Jira: https://storjlabs.atlassian.net/browse/USR-968
We want to keep track of the STORJ amount and exchange rate in the
metadata of Stripe Customer Balance Transaction to be able to generate
reports without the need of requesting CoinPayments for this info.
Change-Id: Ia93af95706cd2312cf688f044874495279fe8fa2
I introduced a bug with https://review.dev.storj.io/c/storj/storj/+/2216
Because the log change allowed insert to be called multiple times.
This changes the insert logic to do nothing if the PK already exists.
Change-Id: I90d192a0f6619bfbb360ea104066f00a3348f6dd
Improve our delete logic to require fewer database requests.
This PR creates a new objectdeletion package
Change-Id: I0500173bb9b8c771accb350f076329ede6dbb42c
request
We are no longer using `BeginDeleteSegment` or `ListSegments` so we can
avoid generating StreamID as a result of `BeginDeleteObject`.
StreamID from `BeginDeleteObject` is also not used on Uplink side.
Change-Id: I3b068deab17068459849b5cf05811cad4b8a9034
We are adding a monkit evaluation for the total sum of data stored on
the nodes before it is inserted into the database. This will give us a
time-series history of total data stored so we can see it change over
time.
Change-Id: I41145a2d7a09c8e63b42ae578bd081035b60e529
To prevent creating multiple users with the same email via API, we should check for an existing user with given email.
Change-Id: Ie35b85c4f94a7ca72d42951dab8ff475d7f0dd7c
Currently a customer created via the IP does not get an payment account until he signs in.
That causes issues if the account should be deleted again.
Change-Id: I393c8f301e426301bb713c423d6ce011138d4ae4
This change switches the backend logic to use the new DB column on the users table to restrict project creation.
Furthermore it back fills the existing limits from registration tokens to the new column to ensure no users are reset to the new default.
UI is updated to reflect ability to create several projects
Change-Id: Ie29157430ae6b065411ca4c4557c9f1be69cdc4f
the flush batch size was set to 1 which means that a flush was
async scheduled after the first write. the explicit trigger wait
was then always flushing nothing, and the test would only
pass if the async flush was scheduled before the read.
remove that async flush and pause the flush loop so that we are
in full control of when the flushes happen so there are no races.
the tests are still disabled but that's because the endpoint is
still disabled.
Change-Id: I2b7b07fd5525388c30be8efbf4af7105087228da
We passed in revocationDB and metainfoDB for no reason.
Lets remove it from the dependency list to further reduce the footprint.
Change-Id: Ic0317bb92670fbd305d4a8b0ed1cb82858e2f6d3
Why: We need a way to cut down on database traffic due to bandwidth
measurement and tracking.
What: This changeset is the Satellite side of settling orders in 1 hr windows.
See design doc for more details: https://review.dev.storj.io/c/storj/storj/+/1732
Change-Id: I2e1c151e2e65516ebe1b7f47b7c5f83a3a220b31
What:
Use the github.com/jackc/pgx postgresql driver in place of
github.com/lib/pq.
Why:
github.com/lib/pq has some problems with error handling and context
cancellations (i.e. it might even issue queries or DML statements more
than once! see https://github.com/lib/pq/issues/939). The
github.com/jackx/pgx library appears not to have these problems, and
also appears to be better engineered and implemented (in particular, it
doesn't use "exceptions by panic"). It should also give us some
performance improvements in some cases, and even more so if we can use
it directly instead of going through the database/sql layer.
Change-Id: Ia696d220f340a097dee9550a312d37de14ed2044
STORJ_POSTGRES_TEST naming was not consistent with STORJ_SIM_POSTGRES.
This allows to use STORJ_TEST_POSTGRES for clarity, it still has a
fallback to STORJ_POSTGRES_TEST.
Change-Id: I6f294c66c80fcfd6750fea2a89795f3b7f5dd691
This runs each benchmark for one iteration to ensure that they are
valid. Unfortunately, it does not give any useful metrics as output.
Change-Id: I68940398c8dd849aed656bd12656f48d5df10128
This system tracks an abstract "api version" from nodes based on
their usage, allowing us to have latching behavior where if a node
ever uses a new api, it can be blocked from using the old api.
This is better than using self-reported semver version information
because the node cannot lie, there's no confusion about what semver
version implies which features, no questions about dev and ci
environments, and no dependencies between reporting the version
and using the new api.
Change-Id: Ifeced5c9ae8e0a16102d79635e176a7d3bdd8ed4
Apply the coin payments when CoinPayments.net recieves the funds
Instead of the when STORJ gets them from CoinPayments.net
Based on 7/1/20 User Growth standup guidance by JG
Relates to: https://storjlabs.atlassian.net/browse/USR-801
Change-Id: I174ca23a585010f39464c45525e1dfe0179b7c1a
Allow more than 25 coin payment statuses to be queries from coinpayments.net
Add some slight logging, a coinpayments duration metric, and a disabled test
These changes are small changes in support of https://storjlabs.atlassian.net/browse/USR-801
Change-Id: I5b176cdd5e513d8bd88b92f9b22a8bd2456bbdd5
Since we increased the number of concurrent audit workers to two, there are going
to be instances of a single node being audited simultaneously for different segments.
If the node times out for both, we will try to write them both to the pending audits
table, and the second will return an error since the path is not the same as what
already exists. Since with concurrent workers this is expected, we will log the
occurrence rather than return an error.
Since the release default audit concurrency is 2, update testplanet default to run with
concurrent workers as well.
Change-Id: I4e657693fa3e825713a219af3835ae287bb062cb
This adds EncryptionKey definition that can be used as a flag.
These order.EncryptionKey-s will be used to encrypt data in
order limits.
This helps to avoid storing lots of transient data in the
main database.
This code doesn't yet contain encryption itself.
Change-Id: I2efae102a89b851d33342a0106f8d8b3f35119bb
Use a field to distinguish migration steps that need to use a
different transaction from previous steps. This is clearer than
using a func.
Change-Id: I2147369d05413f3e8ddb50c71a46ab1ba3ab5114
Jira: https://storjlabs.atlassian.net/browse/USR-821
The `migrate-credits` billing command checks the available credits
balance for all users and moves it to the Stripe balance by creating a
new credit balance transaction.
Change-Id: Iafc7b95a4edad47f7c145a22e210f8c821ac183d
WHAT:
GTM added for partnered satellites sign up pages
csp values were extended to make GTM work at all:
1. googletagmanager.com for GTM script
2. google-analytics.com for GA script
3. hash was added to avoid using 'unsafe-inline' value in 'script-src' directive
Also config flag for GTM id was added
WHY:
Marketing team needs GTM and GA for their campaigns
Change-Id: Ibb2ace737feb971dda6c191599d479fe4a7af332
When a request comes in on the satellite api and we validate the
macaroon, we now also check if any of the macaroon's tails have been
revoked.
Change-Id: I80ce4312602baf431cfa1b1285f79bed88bb4497
Make some minimal improvements in the README about the API documentation
regarding the required requests and successful response bodies.
Change-Id: If7832f3c40166a55d9baefdb2395211ff9e8dc04
add new columns `offline_suspended` and `under_review` to nodes table.
`unknown_audit_suspended` is a new column which will replace `suspended`
Change-Id: I22ddeb338ea0ff63f14332a7ebd0f3e9e4c06cdc
We should not be sending any type of orders to nodes that have completed
graceful exit with the current satellite. In particular, we should not
be trying to audit them, because that would be silly.
Change-Id: Ie2153e5739914ab696feefcdef28545ed70f84e4
WHAT:
credit history page implemented.
can be visited by clicking specific button in a free credits dropdown.
WHY:
UI didn't display remaining coupon value.
coupons and referral items (in future) are displayed in the same place.
Change-Id: I495fd7a99f2ea5117152aaf8f495bd5322f02588
As the tables that get cleaned up by this job get a lot of inserts and deletes over the course of a day, the autovacuum process on PostgreSQL struggles fairly easily/quickly.
Due to its limitation, it can only delete 180,000,000 tuples in one go, before it has to rescan the entire table/index.
With the current load, the most busy satellites accumulate about 1,000,000,000 tuples per day (consumed_serials). With our current 24h interval that results in ~6-7 scans, slowing the entire database down for a quite long time.
This PR reduces the interval to 4 hours, which under a constant load, results in less than 180,000,000 entries per run.
That way, we do not scan twice for only a small gain over said amount. Reducing the interval further would also increase the DB load unnecessary, as each run scans the entire tables at least once.
For future reference, we might need to adjust the interval, if the load is significantly changing.
Change-Id: I18fdd45d93d468cff126e719c8380c29a49f43dd
This test failed due to a timeout on a download which is supposed to
succeed. The testplanet default for the value is 5 seconds, but here
it is 500 milliseconds.
It looks like this is due to the fact that later in the test we need to
wait for a slow node to timeout, so we cut the timeout shorter to reduce
test time.
This PR increases the timeout to 1 second. Still not too long to wait, but
gives us twice as much time to download, decreasing the likelihood that we
see the timeout error.
Change-Id: I504db39ab5dc4d3c505520337b258265d6da7020
Since we increased the number of audit workers from 1 to 2, we need to make sure
concurrent updates do not trample each other. We can do this by serializing the
transactions.
Change-Id: If1b2f71cabe3c779c12ffa33c0c3271778ac3ae0
WHAT:
1. Deposit & Billing history view was divided to be shown separately as Deposit History and Billing History
2. Datepicker was removed from billing page
WHY:
billing UX enhancements
Change-Id: Ie183849ef0965169997674ce37b71db38a562fc2
This ensures that rows are closed to avoid leaks.
Also verifies that Err() is called, to ensure that no
error is left behind.
Change-Id: Idd1bec9bf479f40021da67b2c80ce83033149469
