by doing an indexed anti-join we're able to reduce the time to
select the pending orders by over 10x on postgres. this should
help us process pending orders much more quickly.
it probably won't do as good a job on cockroach because it does
not do an indexed anti-join and instead does a hash join after
scanning the entire consumed serials table. we should either
remove orders entirely or try to make that more efficient
when necessary.
Change-Id: I8ca0535acd21c51e74955b24c9b86d20e4f2ff9c
Make sure that suspended nodes are treated appropriately by the overlay
cache. This means we should expect the following behavior:
* suspended nodes (vetted or not) should not be selected for uploading
new segments
* suspended nodes should be treated by the checker and repairer as
"unhealthy", and should be removed upon successful repair
This commit also removes unused overlay functionality.
Fixes a bug with commit 8b72181a1f where
the audit reporter was automatically suspending nodes regardless of
audit outcome (see test added).
Tests:
* updates repair tests to ensure that a suspended node is treated as
unhealthy and will be removed from the pointer on successful repair
* updates overlay tests for KnownUnreliableOrOffline and KnownReliable
to expect suspended nodes to be considered "unreliable"
* adds satellitedb test that ensures overlay.SelectStorageNodes and
overlay.SelectNewStorageNodes do not include suspended nodes
* adds audit reporter test to ensure that different audit outcomes
result in the correct suspended/disqualified states
Change-Id: I40dba67278c8e8d2ce0bcec5e0a5cb6e4ce2f561
Initial change for checking bucket existence on satellite side for
requests like BeginObject and ListObjects. This is simple implementation
that is just checking bucket in DB but should be improved in future to
avoid DB calls as much as possible.
Part of https://storjlabs.atlassian.net/browse/USR-365
Change-Id: I9076acddc44d7dbfa7612a1c24a007de01621583
This adds a piece deletion handler that has debounce for failed dialing
and batching multiple jobs into a single request.
Change-Id: If64021bebb2faae7f3e6bdcceef705aed41e7d7b
* change overlay.UpdateStats to allow a third audit outcome. Now it can
handle successful, failed, and unknown audits.
* when "unknown audit reputation"
(unknownAuditAlpha/(unknownAuditAlpha+unknownAuditBeta)) falls below the
DQ threshold, put node into suspension.
* when unknown audit reputation goes above the DQ threshold, remove node
from suspension.
* record unknown audits from audit reporter.
* add basic tests around unknown audits and suspension.
Change-Id: I125f06f3af52e8a29ba48dc19361821a9ff1daa1
To handle concurrent deletion requests we need to combine them into a
single request.
To implement this we introduces few concurrency ideas:
* Combiner, which takes a node id and a Job and handles combining
multiple requests to a single batch.
* Job, which represents deleting of multiple piece ids with a
notification mechanism to the caller.
* Queue, which provides communication from Combiner to Handler.
It can limit the number of requests per work queue.
* Handler, which takes an active Queue and processes it until it has
consumed all the jobs.
It can provide limits to handling concurrency.
Change-Id: I3299325534abad4bae66969ffa16c6ed95d5574f
My understanding is that the nodes table has the following fields:
- `address` field which can be a hostname or an IP
- `last_net` field that is the /24 subnet of the IP resolved from the address
This PR does the following:
1) add back the `last_ip` field to the nodes table
2) for uplink operations remove the calls that the satellite makes to `lookupNodeAddress` (which makes the DNS calls to resolve the IP from the hostname) and instead use the data stored in the nodes table `last_ip` field. This means that the IP that the satellite sends to the uplink for the storage nodes could be approx 1 hr stale. In the short term this is fine, next we will be adding changes so that the storage node pushes any IP changes to the satellite in real time.
3) use the address field for repair and audit since we want them to still make DNS calls to confirm the IP is up to date
4) try to reduce confusion about hostname, ip, subnet, and address in the code base
Change-Id: I96ce0d8bb78303f82483d0701bc79544b74057ac
We missed this in the migration that added the num_healthy_pieces
column. It exists in dbx, but not on the actual satellite table.
Change-Id: If16b5ec2325d56406250298531b3285215188bf3
Metainfo method validateAuth checks things like API key, user permission
and rate limit but at the end all errors were returned as
rpcstatus.Unauthenticated.
Old Metainfo is not touched to avoid backward compatibility issues.
Change-Id: I78eb276210fc50151da58a5c84e13ecd0961da29
Previously, we were simply discarding rows from the repair queue when
they couldn't be repaired (either because the overlay said too many
nodes were down, or because we failed to download enough pieces).
Now, such segments will be put into the irreparableDB for further
and (hopefully) more focused attention.
This change also better differentiates some error cases from Repair()
for monitoring purposes.
Change-Id: I82a52a6da50c948ddd651048e2a39cb4b1e6df5c
New API has limited number of options to configure at the moment. We
should remove unused flags from Uplink CLI and add if needed in the
future.
Change-Id: Icf3f3dadd43cb61a3b408b02d0762aef34425dbf
In production, the satellite is overriding the default repair threshold
(35) to a higher value (52). In some places in the checker and
irreparable processes, the repair threshold on the redundancy scheme is
used in place of the override value. This fixes those cases.
Change-Id: Ie7387217d9fb3886f050b5e5b67be51f276196de
The migration was broken into one migration per table to reduce table locking and reduce the
chances of failure due to SQL timeouts.
Of the 14 fields that lacked time zones, only the 3 named 'interval_start` seemed to have non-UTC data in them.
These fields are fixed in the migration by removing the +00 and adding AT TIME ZONE current_setting('TIMEZONE')
Field with good data are migrated by adding AT TIME ZONE 'UTC'
Note that postgres's timezone() is different than cockroach's timezone() so AT TIME ZONE is used.
https://storjlabs.atlassian.net/browse/SM-104
Change-Id: I410f2f1d7c11b143f17844347f37e6f4b1e70fce
- Previously, checkSegmentAltered only checked for segments that were replaced
but we want to detect all changes to a segment that occurred while an audit was being conducted.
- Fixed a bug where nodes failing audits during reverify for non-piece-hash-verified
segments were not being removed from containment mode.
- Filled in gaps in reverify testing to ensure nodes are properly removed from containment.
Change-Id: Icd96d369278987200fd28581395725438972b292
The billing tests were flaky because some assertions ran before the
storage nodes finish their work.
A new helper function in testplanet has been added to allow to wait for
storage nodes endpoints to finish their work. This function now it's
used in the billing tests for avoiding their flakiness.
This commit closes the ticket:
https://storjlabs.atlassian.net/browse/SM-403
A part of fixing other billing tests flakiness.
Change-Id: Iacb750af435f515c04b1e1d3510a218d184c9abc
uplinks
New libuplink is not storing encryption values in with bucket but old
uplinks are using those values for configuration. If bucket was created
with new libuplink we will send back satellite defaults.
Change-Id: Ie1bf3682847e07b302270b4c4bf1a7219f4bf011
Submit an order limit with a high amount but the order has a low amount of traffic.
Make sure the order amount is used for billing.
Change-Id: I6b6ae26e9b8896f4a3acf530b2f48510b6df89cc
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
Add a test for checking that the billing:
* it doesn't include upload traffic
* it includes download traffic
Change-Id: I1655c15c1fad642f77dd210f2014b2586ae10104
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these requests as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
This change should handle issue we have in older uplinks with incorrect
order of storing pointers.
Change-Id: I86514c95df169e6fbc91b52e5117472cae70cb8b
these tables are used in future commits with respect to the new
storagenode payments code. if we create them now, it will make
backfilling them with historical data easier.
Change-Id: I3c08c9770ec5b2baa38b4f2fd18c2f07746a61c2
Remove the check around consuming an expired serial so that we
have more time to run the migration. It does open a small race
of double spends for entries already counted and then added to
the pending queue right around when they're going to expire and
the consumed serials have already been removed, but that should
be rare if we keep the pending queue empty.
Change-Id: I000b15979b09c67751281ff675ea6c81fc9d22dc
common/pb moved grpc to a separate package common/pb/pbgrpc.
This updates this repository to use it.
Change-Id: I2de2a190688871cf9cb61f7ea511f8a01e264e4e
Add a column to the repair queue table in the satellite db for healthy
piece count. When an item is selected from the repair queue, the least
durable segment that has not been attempted in the past hour should be
selected first. This prevents our repairer from getting stuck doing work
on segments that are close to the repair threshold while allowing
segments that are more unhealthy to degrade further.
The migration also clears the repair queue so that the migration runs
quickly and we can properly account for segment health in future repair
work.
We do not select items off the repair queue that have been attempted in
the past six hours. This was changed from on hour to allow us time to
try a wider variety of segments when the repair queue is very large.
Change-Id: Iaf183f1e5fd45cd792a52e3563a3e43a2b9f410b
This new repair timeout (configured as TotalTimeout) will include both
the time to download pieces and the time to upload pieces, as well as
the time to pop the segment from the repair queue.
This is a move from Github PR #3645.
Change-Id: I47d618f57285845d8473fcd285f7d9be9b4318c8
This change adds two new tables to process orders as fast as we used
to but in an asynchronous manner and with hopefully less storage
usage. This should help scale on cockroach, but limits us to one
worker. It lays the groundwork for the order processing pipeline to
be queue rather than database driven.
For more details, see the added fast billing changes blueprint.
It also fixes the orders db so that all the timestamps that are
passed to columns that do not contain a time zone are converted to
UTC at the last possible opportunity, making it less likely to use
the APIs incorrectly. We really should migrate to include timezones
on all of our timestamp columns.
Change-Id: Ibfda8e7a3d5972b7798fb61b31ff56419c64ea35
we want to return back to the user as quick as possible but also keep
deleting remaining pieces on the storagenodes
Change-Id: I04e9e7a80b17a8c474c841cceae02bb21d2e796f
Curently, storage nodes only report their capacity to satellites
once per hour. If a node fills up, it will fail all uploads until
the next contact cycle begins. With these changes, at the end of an
upload we check whether the MinimumDiskSpace threshold has been
passed. If so, trigger the monitor chore to update the node's
capacity, then trigger the contact chore to report the new
capacity to the satellites
Change-Id: Ie6aadaade1e2c12c87e03f8ff9059a50121380a0
Enhance the documentation of the UseSerialNumber method (interface and
implementation) and add several missing dots in doc comments of the
methods of the same interface and implementation.
Change-Id: I792cd344f0d2542e060fa2ec288b71231cae69de
at the end of tally iteration, in order to set the new live
accounting totals, we were iterating over all live accounting
projects. We found a bug with this when running storj-sim. If
we restarted the satellite live accounting would be cleared
because storj-sim was running the live accounting redis instance.
Since live accounting was cleared, at the end of tally, even if
it found data in projects, we would not update the live accounting
totals because we were iterating over the projects from live
accounting to do so. We now iterate over projects found from tally
in order to update live accounting
We also found that if a user deleted everything from their project,
tally would not find it and the live accounting would not be updated.
For this reason, we merge live accounting projects into tally projects
Change-Id: If0726ba0c7b692d69f42c5806e6c0f47eecccb73
rationale: if GC kills the satellite, it would be nice to make
it through a repair checker sweep first
Change-Id: Id56171dc8e13940cfb6481e36a910bad077a01ed
Trace the calls to DeletePiecesService.DeletePieces method and add
metrics for having statistics about the rate that specific storage node
is dialed and duration time spent on dialing storage nodes.
These statistics will help us to find out if we should implement
connections queues to storage node for reducing the deletion time in cae
that we see that we're spending too much time dialing frequent storage
nodes.
Ticket: https://storjlabs.atlassian.net/browse/SM-85
Change-Id: I9601676c3a8ad96c73c93833145929e4817755e2
rate
Graceful exit is very slow at the moment. Over the last couple days we
increase the batch size on Stefans satellite to 1000 but as a side
effect the error rate was increased. With a batch size of 500 the error
rate looks stable.
This PR will increase the default to batch size to 300. Graceful exit
will still be painful slow but at least it will be a bit faster. At the
same time this PR also increases the number of errors we tolerate. We
don't want to DQ slow storage nodes just because they didn't finish all
300 transfers in time. We want to give them more retries.
Change-Id: I92e3f99e116d4988457d8b902a88e85ed1bcc1a7
Fixes https://storjlabs.atlassian.net/browse/USER-240
- Adds UnsynchronizedPut method to metainfo service that overwrites any
existing pointer under the same path
- Uses UnsynchronizedPut in the metainfo endpoint for committing the
segments
Change-Id: Icb43f31ea33f14066ca9dfdcf226eb3079b90948
if redis crashed in the middle of tally we could have a situation
where we erroneously subtract from a project total. Currently,
`latest` should never be less than `initial`
Change-Id: Ibb5ab724ac0ad4d684f7954fad7a9e061104b7df
Currently SNs report their free disk space once per hour. If a node
becomes full, it has to wait until the next contact cycle begins to
report; all the while receiving and failing upload requests. By increasing
the minimum required disk space, we can give the storage nodes more time
to report their space before the completely fill up. This change goes
hand-in-hand with another change we want to implement: trigger capacity
report on SN immediately upon falling below threshold.
Change-Id: I12f778286c6c3f582438b0e2949765ac43325e27
This change resolves all the storage node addresses to their IP addresses
before giving them to the uplink so that the uplink doesn't have to resolve
a hundred hosts and can immediately connect to improve uplink performance.
Change-Id: Idb834351e0fece409d74c8a1c29b0b8c9b09c9ff
This peer will contain our administrative panels.
It's completely separated from our other satellite
processes because it allows better control for restricting
access to it.
Change-Id: Ifca473bee82ff6c680b346918ba32b835a7a6847
Add monkit metric for the rate-limit when the rate limit is hit
Logs warning with projectID
https://storjlabs.atlassian.net/browse/SM-165
Change-Id: I352dc40006021990d1bc66a999f62bbf8deb54db
Adds ExcludedIPs to the NodeCriteria for selecting new storage
nodes. Previously, ExcludedIPs was only added to the NodeCriteria
for selecting reputable storage nodes. Now that both are included
in the FindStorageNodesWithPreferences call, it should no longer
be possible to repair pieces to nodes that are on the same IP as
nodes already storing pieces from that segment.
Adds TestSelectNewStorageNodesExcludedIPs to make sure that
SelectNewStorageNodes returns nodes with different IP addresses.
https://storjlabs.atlassian.net/browse/V3-3011
Change-Id: Ic2d5e607cadeba6e8d5c40f9717149cb30880335
more trustworthy downtime tracking
Detection chore: Do not update downtime at all from the detection chore.
We only want to include downtime between two explicitly failed ping attempts
(the duration between last contact success and the first failed ping is no longer
included in downtime calculation)
Estimation chore: If the satellite started after the last failed ping for a node,
do not include offline time since the last failed ping time - only
estimate based on two failed pings with no satellite downtime in
between.
This protects us from including satellite downtime in our storagenode downtime calculations.
Change-Id: I1fddc9f7255a7023e02474255d70c64faae75b8a
Sometimes the upload that is supposed to fail due to excess usage
would pass. This looks to be because it's overwriting another object
uploaded earlier in the test and deleting the old pointer. If tally
happened to run after the pointer is deleted but before the current
upload reaches the live accounting check, it might pass through.
The solution is to upload to a different path each time.
Change-Id: Ie6c825b9c6eab9ed53426ae262e7997bcb6beb7f
In the methods we use to retrieve a user's chargeable BW, we were summing GET, GET_AUDIT,
and GET_REPAIR. We only want to charge for GET
Change-Id: Icead7695494b22c7c835482cf8b1512a980d59f1
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
it was noticed that if you had a long lived transaction A that
was blocking some other transaction B and A was being aborted
due to retriable errors, then transaction B was never given
priority. this was due to using savepoints to do lightweight
retries.
this behavior was problematic becaue we had some queries blocked
for over 16 hours, so this commit addresses the issue with two
prongs:
1. bound the amount of time we will retry a transaction
2. create new transactions when a retry is needed
the first ensures that we never wait for 16 hours, and the value
chosen is 10 minutes. that should be long enough for an ample
amount of retries for small queries, and huge queries probably
shouldn't be retried, even if possible: it's more preferrable to
find a way to make them smaller.
the second ensures that even in the case of retries, queries that
are blocked on the aborted transaction gain priority to run.
between those two changes, the maximum stall time due to retries
should be bounded to around 10 minutes.
Change-Id: Icf898501ef505a89738820a3fae2580988f9f5f4
Allow rate limit project cache to expire so we can make project level rate limit changes without restarting the satellite process.
Change-Id: I159ea22edff5de7cbfcd13bfe70898dcef770e42
Core shouldn't be handling any repair load and we have already disabled it in production.
Let's make it official and remove it.
Change-Id: I46e236692a9164421648cfc974dd3246416b2e00
Satellite now is keeping RS values for uplink but old uplinks were using
default bucket settings. Because of that we need to override buckets
settings with satellite settings to avoid breaking older uplinks.
Change-Id: Ia1068db70e4adbf741c5e81d27d9e39799049c22
before dbx would generate a compilcated blob of conditions that
encoded a row comparison, which only optimized to an index seek
on cockroachdb. this means that sqlite and postgres both had
quadratic behavior on paged queries of this form. instead, use
the implicit row construction feature supported in all of the
databases to do paged support so that they all optimize well.
Change-Id: Iac8703929ba2a59ee3ffa619b916d12663422887
This reverts commit 8772867855.
for uplink versions v0.25.0 through v0.30.7, there's a bug with multiplesegment upload
where the last segment is inline caused by this commit.
Change-Id: If375e186b23265586caf08991c25980e99f3cc1a
Change is adding object deletion to BeginObject request (before upload).
Now when satellite controls deletion we can move deletion before upload
to satellite. This change improves two things:
* no need for additional request to delete object before upload (need
one more change to storj/uplink)
* fix an issue with lack of permissions to upload if caveat allows only
for writing (e.g. disallow deletes but allows to write)
https://storjlabs.atlassian.net/browse/V3-3362
Change-Id: Ic453146298cdd302df290c532123731a3f99e38e
The old migration was not working. It was updateding pending (status 0)
and failed (status -1) to completed (status 100).
Change-Id: I808ff3cc692fe6c698ce26a8b411b134e67b752b
For the last few month we had no issues with order submission. I would
call it stable and now it is time to risk a lower expire time. This will
increase the database performance on the satellite and it will reduce
the delay for billing.
The long term goal is 6h but for that step we need to change graceful
exit first. At the moment storage nodes would get disuqlaified for not
transfering alle pieces in less than 6 hours.
Change-Id: I421a2c2421c5374c4e706e2338f1c2161fedc14c
paths are organized as follows:
project_id/segment_index/bucket_name/encrypted_key
so by picking parts[0] and parts[1], we were using the segment
index instead of the bucket name, causing bandwidth to be
accounted for incorrectly. additionally, we were using the
PUT action instead of the PUT_GRACEFUL_EXIT action, causing
the data to be charged incorrectly. we use PUT_REPAIR for
now because nodes won't accept uploads with PUT_GRACEFUL_EXIT
and our tables need migrations to handle rollups with it.
Change-Id: Ife2aff541222bac930c35df8fcf76e8bac5d60b2
Enable a new golangci-lint linter that has been added to the last
release. It reports a very little number of issues so they are fix it in
this commit.
Change-Id: I74fef4779c3f592aae19103fd9f70103586fe24e
Change DeleteObjectPieces for deleting the segments' pointers of an
object in a reverse order.
Last segment: L
N: total number of segments
Deleting in reverse order is: L, n-1 to 0
Deleting in reverse order makes BeginDeleteObject usable to delete
partially uploaded objects that were interrupted (e.g. upload
cancellation).
With this change, the uplink upload cancellation, can be changed to use
BeginDeleteObject to cleanup already uploaded segments without having to
retrieve orders and dial every single node which stored a piece.
Ticket: https://storjlabs.atlassian.net/browse/V3-3525
Change-Id: Ieca6fd3801c4b71671811cb5f08a99d5146928a6
A uuid.UUID is an array of bytes, and slicing it refers to the
underlying value, much like taking the address. Because range
in Go reuses the same value for every loop iteration, this means
that later iterations would overwrite earlier stored project
ids. We fix that by making a copy of the value before slicing it
for every loop iteration.
Change-Id: Iae3f11138d11a176ce360bd5af2244307c74fdad
A few variables were not renamed to the new standard piecesTotal and
piecesContentSize, so it was unclear which value was being used. These
have been updated, and some comments made more thorough.
Change-Id: I363bad4dec2a8e5c54d22c3c4cd85fc3d2b3096c
This change updates the storagenode piecestore apis to expose access to
the full piece size stored on disk. Previously we only had access to
(and only kept a cache of) the content size used for all pieces. This
was inaccurate when reporting the amount of disk space used by nodes.
We now have access to the total content size, as well as the total disk
usage, of all pieces. The pieces cache also keeps a cache of the total
piece size along with the content size.
Change-Id: I4fffe7e1257e04c46021a2e37c5adc6fe69bee55
Currently we risk losing pending bandwidth rollup writes even on a clean
shutdown. This change ensures that all pending writes are actually
written to the db when shutting down the satellite.
Change-Id: Ideab62fa9808937d3dce9585c52405d8c8a0e703
Currently storage tests were tied to the default lookup limit.
By increasing the limits, the tests will take longer and sometimes
cause a large number of goroutines to be started.
This change adds configurable lookup limit to all storage backends.
Also remove boltdb.NewShared, since it's not used any more.
Change-Id: I1a052f149da471246fac5745da133c3cfc27582e
Currently Cockroach DB setup takes a significant amount of time.
This flattens the database setup into a single query,
which improves the test time significantly.
The migration tests still test each migration separately.
Change-Id: Iaca16f34a6af3926fa2b5ebf618f939fd59460b3
With this change RS configuration will be set on satellite. Uplink with
get RS values with BeginObject request and will use it. For backward
compatibility and to avoid super large change redundancy scheme stored
with bucket is not touched. This can be done in future.
Change-Id: Ia5f76fc10c37e2c44e4f7b8754f28eafe1f97eff
Since incoming times may be in any time zone, and we want the output
to be in UTC and for them to have 00:00:00 hours, minutes and seconds
we first convert the incoming timestamp to UTC before doing the
truncate to the day and adding a day.
Because the old code always returned a timestamp that was in the
future, this is just for efficiency.
Change-Id: Ie692d47bca8691e73852c822d5c56cf8773d99b4
Limits how many times metainfo APIs can be called per second by project ID. If limit is exceeded, the API will return Unauthorized/Too Many requests.
Limit per second and the size of the limiter cache per project are configurable, as well as whether the limiter is enabled.
Tests added/updated for the new rate_limit field in projects table.
Tests added for exceeding limits and disableing limiter.
Change-Id: Ic8ad102de3b690a475809d4f684156d5715f20fa
This change is a special case for batch processing. If in batch request
CommitSegment and CommitObject are one after another we can execute
these request as one. This will avoid current logic where we are saving
pointer for CommitSegment and later we are deleting this pointer and
saving it once again as under last segment path for CommitObject.
Change-Id: If170e78c8410f5ba5916cbff6a29b9221db9ce2e
Replace all the remaining uses of sql.DB with tagsql.DB to
fix issues with context cancellation.
Introduce tagsql.Open which helps to get rid of all tagsql.Wrap-s.
Use tagsql in cockroachkv and postgreskv.
Change-Id: I8946d203341cb85a25976896fc7881e1f704e779
Not having a skew caused an issue where:
1. Uplink calls "begin segment", where segment isn't committed to the
database.
2. Uplink stores piece X to the storage node A with timestamp 1.
3. Satellite runs garbage collection with timestamp 2.
4. Satellite sends retain request to storage node A with timestamp 2.
5. Storage node A deletes piece X, because 1 < 2.
6. Uplink calls "commit segment" with storage node A in it.
7. Download of segment fails, because A doesn't have piece X.
In production this is not an issue since the MaxTimeSkew is 72h by
default.
Change-Id: Id87ca3ddc44103dcd85d031b1367168c014b8e7b
Also added temporary types withRebind and withTagTx,
which will be later removed. Currently they help to avoid
changing the whole codebase at the same time.
Change-Id: I7f07ba8f4709a23a463bfa67464628665a05808f
warning: databases migrated to version 77 before this commit
is merged must be manually re-migrated. this should not be a
problem for anything but staging databases.
Change-Id: Ie1631c48379472352014183ee43f1465e22200f7
live accounting used to be a cache to store writes before they are picked up during
the tally iteration, after which the cache is cleared. This created a window in which
users could potentially exceed the storage limit. This PR refactors live accounting to
hold current estimations of space used per project. This should also reduce DB load
since we no longer need to query the satellite DB when checking space used for limiting.
The mechanism by which the new live accounting system works is as follows:
During the upload of any segment, the size of that segment is added to its respective
project total in live accounting. At the beginning of the tally iteration we record
the current values in live accounting as `initialLiveTotals`. At the end of the tally
iteration we again record the current totals in live accounting as `latestLiveTotals`.
The metainfo loop observer in tally allows us to get the project totals from what it
observed in metainfo DB which are stored in `tallyProjectTotals`. However, for any
particular segment uploaded during the metainfo loop, the observer may or may not
have seen it. Thus, we take half of the difference between `latestLiveTotals` and
`initialLiveTotals`, and add that to the total that was found during tally and set that
as the new live accounting total.
Initially, live accounting was storing the total stored amount across all nodes rather than
the segment size, which is inconsistent with how we record amounts stored in the project
accounting DB, so we have refactored live accounting to record segment size
Change-Id: Ie48bfdef453428fcdc180b2d781a69d58fd927fb
this commit introduces the reported_serials table. its purpose is
to allow for blind writes into it as nodes report in so that we have
minimal contention. in order to continue to accurately account for
used bandwidth, though, we cannot immediately add the settled amount.
if we did, we would have to give up on blind writes.
the table's primary key is structured precisely so that we can quickly
find expired orders and so that we maximally benefit from rocksdb
path prefix compression. we do this by rounding the expires at time
forward to the next day, effectively giving us storagenode petnames
for free. and since there's no secondary index or foreign key
constraints, this design should use significantly less space than
the current used_serials table while also reducing contention.
after inserting the orders into the table, we have a chore that
periodically consumes all of the expired orders in it and inserts
them into the existing rollups tables. this is as if we changed
the nodes to report as the order expired rather than as soon as
possible, so the belief in correctness of the refactor is higher.
since we are able to process large batches of orders (typically
a day's worth), we can use the code to maximally batch inserts into
the rollup tables to make inserts as friendly as possible to
cockroach.
Change-Id: I25d609ca2679b8331979184f16c6d46d4f74c1a6
everyone was importing it as dbx anyway. why should it be
named satellitedb? so yeah just pass the "-p dbx" flag.
Change-Id: I5efa669f4f00f196b38a9acd0d402009475a936f
Create a service for deleting pieces of storage nodes.
Currently the DeletePieces method returns after a success threshold,
completion or a timeout.
The end goal is to return when reaching the success threshold and
leaving the remaining goroutines running after DeletePieces method
returns and add a life cycle to the service that it waits for them when
it closes.
This is the first commit for ticket:
https://storjlabs.atlassian.net/browse/V3-3476
Change-Id: If740bbf57c741f880449980b8176b036dd956c7b
This reverts commit 8e242cd012.
Revert because lib/pq has known issues with context cancellation.
These issues need to be resolved before these changes can be merged.
Change-Id: I160af51dbc2d67c5449aafa406a403e5367bb555
this will allow for some nice runtime analysis down the road.
also, this allows for wrapping database handles in a way that
can interact with these contexts
requires https://review.dev.storj.io/c/storj/dbx/+/514
Change-Id: Ib087b7cd73296dd2c1e0331314da34d861f61d2b
this allows for setting $STORJ_METAINFO_POSTGRESQL_USE_ALT=yes if you
want to use the cockroachkv implementation for metainfo against postgres
Change-Id: I0c9458c83fd67ee63ef4a78351e64a80a0647408
the hope is that it is mostly interfering with itself, so this
will make it not do that (well, N api servers, but hopefully
that's not enough to cause it to have issues).
Change-Id: Ifd0c9e6617457785ab25fe5b714d8556cdc8e2d3
