This change allows for overriding project usage prices for a specific
partner so that users who sign up with that partner do not need their
invoices to be manually adjusted.
Relates to storj/storj-private#90
Change-Id: Ia54a9cc7c2f8064922bbb15861f974e5dea82d5a
* use the same DB application name for satellite and metabase
* use noop orders DB implementation to avoid storing allocated bandwidth
in DB
Change-Id: I20e88c694d38240fe1a20c45719e210cfb76402c
On BSD, the storagenode-updater falls back to renaming the storagenode without
doing anything to restart the service.
Like the approach we have for linux, this change finds the process ID of the
storagenode using pgrep and sends an interrupt signal to the process.
Closes https://github.com/storj/storj/issues/5333
Change-Id: Icced90ea3e831528804784c2170a3b8b14952e8c
We have to wait until the slowest node is done being tested before we
can move on to the next of segments. Since the slowest node can be
arbitrarily slow, we'll set a timeout and treat too-slow nodes as
temporarily offline.
Change-Id: I80fe865dd4e8f826700430fb0140c2d3aefca381
When we are verifying pieces by downloading the first byte, if we
encounter a timeout, treat the node as if we failed to connect to it,
and log the error once instead of twice.
Change-Id: I70602d554183c98f1213f3ffb1bfec41100ea0e7
This csv file was being closed as soon as the service was created.
All subsequent writes to the closed file handle produced errors,
which were logged but otherwise ignored.
Instead, we would like the file to remain open and writable, until
the service is destroyed.
Change-Id: Ib29944d25b2f5b2d0f90fdbdcde44fea8d769321
The copyFile method has some safeguards to ensure that the multipart
write is aborted. This is accomplished by always calling abort on the
MultiWriteHandle when the copy is finished, whether or not there was a
failure or it was successfully committed. If the copy was committed,
then this RPC is a no-op on the metainfo server.
Regardless, the calls to abort to constitute an additional RPC to the
satellite for no benefit. This is exacerbated by the fact that the code
currently ends up calling abort twice.
This change updates the libuplink-backed MultiWriteHandle implementation
to not call abort if the write is committed and vice-versa. This
eliminates the two wasteful RPC calls.
Change-Id: I13679234f6f473e9a93179e6791fb57eac512f25
added in storj-sim rangedloop for each satellite, to verify it works for metrics oveserver,
removed identity from rangedloop peer as we never use it, added logs on service run, added loop
to service instead of endless for loop, interval value to config
Closes: https://github.com/storj/storj/issues/5414
Change-Id: Ibc3b06071b68feda4a35b45da2bbe36e22a02fc8
Previously, if any pieces are still on disqualified nodes, this tool
would treat those pieces as fine (if the disqualified node is still
online) or temporarily unavailable (if the disqualified node is
offline). Instead, we should treat such pieces as lost.
This also fixes a slight problem with the code that handles a broken
alias. This is not likely to happen, but if we do see an alias that is
not in the alias map, we return an error instead of nil.
Change-Id: Ib4e2e729ef0535dd7bd9ce2f621680d9f959891c
Because it was originally intended to work on only a few pieces from
each segment at a time, and would frequently have reset its list of
online nodes, segment-verify has been taking nodes out of its
onlineNodes set and never putting them back. This means that over a long
run in Check=0 mode, we end up treating more and more nodes as offline,
permanently. This trend obfuscates the number of missing pieces that
each segment really has, because we don't check pieces on offline nodes.
This commit changes the onlineNodes set to an "offlineNodes" set, with
an expiration time on the offline-ness quality. So nodes are added to
the offlineNodes set when we see they are offline, and then we only
treat them as offline for the next 30 minutes (configurable). After that
point, we will try connecting to them again.
Change-Id: I14f0332de25cdc6ef655f923739bcb4df71e079e
The WithExists methods previously were not writing problematic pieces to
problem-pieces.csv. With this change, they will.
Change-Id: I51eadd3d8f4299e1efa787c9266a7aacfa525eb3
When this branch is followed, `audit.OutcomeFailure` is returned, and
`MarkNotFound()` is immediately called again (in
`(*NodeVerifier).Verify()`). Calling `MarkNotFound()` twice for the same
piece is not correct.
Change-Id: I1a2764bc32ed015628fcd9353ac3307f269b4bbd
It may help to know how much faster these methods are than the
alternative (asking nodes for each piece in turn).
Change-Id: Ieb7c963f62b662f72c84a49de8a09c065c14f782
It was ok as it was, but since we want to keep a close eye on progress
while the tool is running, it will help to have results written to the
output file immediately instead of after the buffer is full or the
program exits.
Change-Id: Ie027f05771a637afb06969ec775cd32b142b7635
This change is similar to
https://review.dev.storj.io/c/storj/storj/+/7687 but applied when
uploading from stdin with parallelism > 1.
Currently, the paralellism from stdin scales up to 3 or 4, but not
greater than that. If we buffer the content from stdin more aggressively
the parallelism scales to higher levels and reaches the performance of
reading directly from a file.
Change-Id: I1f447686a88074882709992ee6d52dd262e220fb
When Check == 0 (check all pieces), there is nearly always a piece left
in the retry count, so most segments get logged in segments-retry.csv.
This change makes it so we require retry>5 before adding to
segments-retry.csv (only in the check==0 case).
Change-Id: Iaea523c27eb777e3c248c27c7ef5effe77ae54cf
This new advanced flag configures libuplink to store in-memory the
erasure-coded pieces that are temporarily created during upload.
By default, libuplink writes the erasure-coded pieces as temp files on
the disk, but this results in additional IOPS that affect the
performance in hot-rodded scenarios.
If the erasure-coded pieces are kept in-memory and the system has enough
RAM, the upload speed may be boosted with 20-30%.
The flag is added as "advanced" as we don't recommend it by default.
Co-authored-by: Stefan Benten <mail@stefan-benten.de>
Change-Id: Icc54f03b6c0bc27c97126f6f1d22748d21a15959
* better error handling when Exists method is not avaialble on SN
* more optimal processing of response from Exists method
Change-Id: I6d61c09473e9f5ab76a4601720e8bd520767f4c2
This change creates a new independent process, the 'auditor', comparable
to the repairer, gc, and api processes. This will allow auditors to be
scaled independently of the core.
Refs: https://github.com/storj/storj/issues/5251
Change-Id: I8a29eeb0a6e35753dfa0eab5c1246048065d1e91
Now that all the reverification changes have been made and the old code
is out of the way, this commit renames the new things back to the old
names. Mostly, this involves renaming "newContainment" to "containment"
or "NewContainment" to "Containment", but there are a few other renames
that have been promised and are carried out here.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: I34e2b857ea338acbb8421cdac18b17f2974f233c
Now that we are doing scalable piecewise reverifications, the code for
handling the old way of doing things (containment, pending audits,
reporting, testing) can now be removed.
Refs: https://github.com/storj/storj/issues/5230
Change-Id: Ief1a75f423eff682e8f3d57804e343b3409a6631
This adds the capability to the segment-verify tool of checking all
pieces of every indicated segment.
Pieces which could not be accessed (i.e. we couldn't get a single
byte from them) are recorded in a csv file.
I haven't been able to test this in any very meaningful way, yet, but I
am comforted by the fact that the worst things it could possibly do are
(a) download pieces too many times, and (b) miss downloading some
pieces.
Change-Id: I3aba30921572c974993363eb36d0fd5b3ae97907
Provides the `segment-verify run buckets` command for verifying segments within a list of buckets.
Bucket list is a csv file with `project_id,bucket_name` to be checked.
https://github.com/storj/storj-private/issues/101
Change-Id: I3d25c27b56fcab4a6a1aebb6f87514d6c97de3ff
Because --readonly is default true, passing something like
--disallow-deletes=false would not actually update that
value because the readonly flag would override. this makes it
so that the --disallow-* flags override the --readonly and
--writeonly flags.
Also fixes some minor formatting issues with share like an
extra space after the "Public Access:" entry.
Simplifies the handling of the explicit "none" by making the
flags for the dates optional and using nil to signify that
the value was left unset.
Bump the go.mod to go1.18 to enable the use of generics and
add a small generic function. This can easily be backed out
if it causes problems.
Change-Id: I1c5f1321ad17b8ace778ce55561cbbfc24321a68
NewContainment will replace Containment later in this commit chain, but
for now it is not yet being used.
NewContainment will allow a node to be contained for multiple pending
reverify jobs at a time. It is implemented by way of the reverify queue.
Refs: https://github.com/storj/storj/issues/5231
Change-Id: I126eda0b3dfc4710a88fe4a5f41780618ec19101
The default 'info' level for the storagenode will dump dozens of
lines every second. This change adds the ability to configure
the log.level argument at run time using LOG_LEVEL env variable.
Co-authored-by: Clement Sam <clementsam75@gmail.com>
Uplink doesn't have a `save` command, however, it's referred on an error
message that's returned when the `access register` command is executed
without having any default access configured.
The correct command to mention is `import`.
Change-Id: Ia2092d02965737f421683fc98c52a51c9529b86e
Reputation updates during repair currently consumes a lot of database
resources. Sometimes increasing the rate of repair is more important
than auditing a node based on whether they have or don't have the
correct piece during repair. This is the job of the audit service.
This commit is to implement an intermediate solution from this issue: https://github.com/storj/storj/issues/5089
This commit does not address the more in-depth fix discussed here: https://github.com/storj/storj/issues/4939
Change-Id: I4163b18d78a96fadf5265789fd73c8aa8def0e9f
If we are processing list of segments (csv) we should not stop if one of
segments is not found in DB.
Change-Id: I720f85dc7601c2ca77032e20c1577de55092bd9b
Current option is to put stream id and position as an input but
it's not very efficient when we have long list of segments to repair.
This change adds option to read whole csv file and process each entry
one by one.
If command will have single argument then it will treat it as csv file
location and if will have two arguments then it will parse it just as
stream id and position.
Change-Id: I1e91cf57a794d81d74af0091c24a2e7d00d1fab9
Implements logic for satellite command to repair a single segment.
Segment will be repaired even if it's healthy. This is not checked
during this process. As a part of repair command will download whole
segment into memory and will try to reupload segment to number of new
nodes that equal to existing number of pieces. After successful
upload new pieces will completely replace existing pieces.
Command:
satellite repair-segment <streamid> <position>
https://github.com/storj/storj/issues/5254
Change-Id: I8e329718ecf8e457dbee3434e1c68951699007d9
This patch makes it possible to use `uplink share` in test environment (like storj-up) where authservice doesn't have full secure endpoint.
This supposed to be an undocumented feature (no flag, just a custom prefix) to avoid any confusion for regular users.
Change-Id: I256aefc944066e52c72224e7b6f1a593b5bc57f7
Add nodeevents.DB to satellite overlay service so we can insert node
events into the nodeevents DB.
Change-Id: I642c0ccc9941ecdb08cb22d5c8cf701959a55156
New flag 'MultipleVersions' was not correctly passed from metainfo
configuration to metabase configuration. Because configuration was
set correctly for unit tests we didn't catch it and issue was found
while testing on QA satellite.
This change reduce number of places where new metabase flags needs
to be propagated from metainfo configuration to avoid problems with
setting new flags in the future.
Fixes https://github.com/storj/storj/issues/5274
Change-Id: I74bc122649febefd87f665be2fba628f6bfd9044
The current deployment strategy requires that the GC bloomfilter generation process executes only once and exits.
Change-Id: I952991f126596aa165d1f2e9fce6f8548c21bdba
