to support TCP_FAST_OPEN, we're considering just using
two TCP connections in parallel per request, one with
and one without. this allows us to safely fire both
concurrently without stressing out the node too much.
see https://review.dev.storj.io/c/storj/storj/+/9933
Change-Id: I9aa8a0252350db5ace04ee125bfe469203e980ec
The current implementation blocks the the startup until one or none
of the trusted satellites is able to reach the node via QUIC.
This can cause delayed startup. Also, the quic check is done
once during startup, and if there is a misconfiguration later,
snos would have to restart to node.
In this change, we reuse the contact service which pings the satellite
periodically for node checkin. During checkin the satellite tries
pinging the node back via both TCP and QUIC and reports both statuses.
WIth this, we are able to get a periodic update of the QUIC status
without restarting the node.
Also adds the time the node was last pinged via QUIC to the tooltip
on the QUIC status tab.
Resolves https://github.com/storj/storj/issues/4398
Change-Id: I18aa2a8e8d44e8187f8f2eb51f398fa6073882a4
Currently, if a node has untrusted a satellite, the satellite can still
successfully ping the node. If a node decide to untrust a satellite, the
satellite should also mark it as conact failed
Change-Id: Idf80fa00d9849205533dd3e5b3b775b5b9686705
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
QUIC
We want to encourage storagenodes to open their udp port. This PR
changes contact service in satellite to try to connect to nodes through
QUIC. If satellite can't reach nodes through quic, it will send an error
message back to nodes. On the nodes side, it will always log out error
message from check in if the error message is not empty.
Whether satellite can reach nodes through quic has no affect on nodes'
uptime check.
Change-Id: I5ebf80f921c4a6504997d83c8bd45226da9d3703
If the satellite fails to pingback the storage node during CheckIn
an error message is returned to the node in the response, but the actual
error value returned is nil. We are only checking the error. This means
the node has no feedback about the failure, and the node also does not
attempt to retry the connection.
Change-Id: Iaed00e422ba91af573e72255cc6671ea97928eae
Most places now need the NodeURL rather than the ID and Address
separately. This simplifies code in multiple places.
Change-Id: I52621d8ca52296a8b5bf7afbc1001cf8bfb44239
On satellite, remove all references to free_bandwidth column in nodes table.
On storage node, remove references to AllocatedBandwidth and MinimumBandwidth and mark as deprecated.
Protobuf message, NodeCapacity, is left intact for backwards compatibility.
Once this is released to all satellites, we can drop the column from the DB.
Change-Id: I2ff6c6537fc9008a0c5588e951afea58ede85838
When a storagenode begins to run low on capacity, we want to notify
the satellite before completely running out of space. To achieve this,
at the end of an upload request, the SN checks if its available space has
fallen below a certain threshold. If so, trigger a notification to the
satellites.
The new NotifyLowDisk method on the monitor chore is implemented using the
common/syn2.Cooldown type, which allows us to execute contact only once
within a given timeframe; avoiding hammering the satellites with requests.
This PR contains changes to the storagenode/contact package, namely moving
methods involving the actual satellite communication out of Chore and into
Service. This allows us to ping satellites from the monitor chore
Change-Id: I668455748cdc6741291b61130d8ef9feece86458
Curently, storage nodes only report their capacity to satellites
once per hour. If a node fills up, it will fail all uploads until
the next contact cycle begins. With these changes, at the end of an
upload we check whether the MinimumDiskSpace threshold has been
passed. If so, trigger the monitor chore to update the node's
capacity, then trigger the contact chore to report the new
capacity to the satellites
Change-Id: Ie6aadaade1e2c12c87e03f8ff9059a50121380a0
this commit updates our monkit dependency to the v3 version where
it outputs in an influx style. this makes discovery much easier
as many tools are built to look at it this way.
graphite and rothko will suffer some due to no longer being a tree
based on dots. hopefully time will exist to update rothko to
index based on the new metric format.
it adds an influx output for the statreceiver so that we can
write to influxdb v1 or v2 directly.
Change-Id: Iae9f9494a6d29cfbd1f932a5e71a891b490415ff
Remove starting up messages from peers. We expect all of them to start,
if they don't, then they should return an error why they don't start.
The only informative message is when a service is disabled.
When doing initial database setup then each migration step isn't
informative, hence print only a single line with the final version.
Also use shorter log scopes.
Change-Id: Ic8b61411df2eeae2a36d600a0c2fbc97a84a5b93
- also updated ping chore to pick up trust changes
- fixed small typo in blueprint
- fixed flags for storj-sim
- wired up changes to testplanet
Change-Id: I02982f3a63a1b4150b82a009ee126b25ed51917d
* improve errors in satellite contact endpoints
* add changes per CR comments
* update pingback method so it still updates node table
* fix err and returns
* fix zap logging to be better
When the contact chore starts running before the monitor service has
provided any useful capacity data, the first outgoing contact has
not-very-helpful data for the satellite. This change causes the contact
chore to wait until capacity data is available. The wait should be quite
short in all reasonable cases: even when a node starts with a lot of
stored pieces and no cached spaceUsedDB data, new data will have been
calculated and cached by the call to
`peer.Storage2.CacheService.Init(ctx)` in `storagenode.cmdRun()` before
`peer.Run(ctx)`.
Change-Id: Ibc26d5c1fc10a23006c00bc3f13ff6cf71f8bf1d
all of the packages and tests work with both grpc and
drpc. we'll probably need to do some jenkins pipelines
to run the tests with drpc as well.
most of the changes are really due to a bit of cleanup
of the pkg/transport.Client api into an rpc.Dialer in
the spirit of a net.Dialer. now that we don't need
observers, we can pass around stateless configuration
to everything rather than stateful things that issue
observations. it also adds a DialAddressID for the
case where we don't have a pb.Node, but we do have an
address and want to assert some ID. this happened
pretty frequently, and now there's no more weird
contortions creating custom tls options, etc.
a lot of the other changes are being consistent/using
the abstractions in the rpc package to do rpc style
things like finding peer information, or checking
status codes.
Change-Id: Ief62875e21d80a21b3c56a5a37f45887679f9412
* test that all nodes can check in with all satellites
* keep kademlia config
* add untrusted satellite test
* use getversion
* remove kademlia config changes in test-sim-backwards.sh
* add kademlia flags back to storj-sim storagenode
* reset kademlia flags in storagenode entrypoint
What:
cmd/inspector/main.go: removes kad commands
internal/testplanet/planet.go: Waits for contact chore to finish
satellite/contact/nodesservice.go: creates an empty nodes service implementation
satellite/contact/service.go: implements Local and FetchInfo methods & adds external address config value
satellite/discovery/service.go: replaces kad.FetchInfo with contact.FetchInfo in Refresh() & removes Discover()
satellite/peer.go: sets up contact service and endpoints
storagenode/console/service.go: replaces nodeID with contact.Local()
storagenode/contact/chore.go: replaces routing table with contact service
storagenode/contact/nodesservice.go: creates empty implementation for ping and request info nodes service & implements RequestInfo method
storagenode/contact/service.go: creates a service to return the local node and update its own capacity
storagenode/monitor/monitor.go: uses contact service in place of routing table
storagenode/operator.go: moves operatorconfig from kad into its own setup
storagenode/peer.go: sets up contact service, chore, pingstats and endpoints
satellite/overlay/config.go: changes NodeSelectionConfig.OnlineWindow default to 4hr to allow for accurate repair selection
Removes kademlia setups in:
cmd/storagenode/main.go
cmd/storj-sim/network.go
internal/testplane/planet.go
internal/testplanet/satellite.go
internal/testplanet/storagenode.go
satellite/peer.go
scripts/test-sim-backwards.sh
scripts/testdata/satellite-config.yaml.lock
storagenode/inspector/inspector.go
storagenode/peer.go
storagenode/storagenodedb/database.go
Why: Replacing Kademlia
Please describe the tests:
• internal/testplanet/planet_test.go:
TestBasic: assert that the storagenode can check in with the satellite without any errors
TestContact: test that all nodes get inserted into both satellites' overlay cache during testplanet setup
• satellite/contact/contact_test.go:
TestFetchInfo: Tests that the FetchInfo method returns the correct info
• storagenode/contact/contact_test.go:
TestNodeInfoUpdated: tests that the contact chore updates the node information
TestRequestInfoEndpoint: tests that the Request info endpoint returns the correct info
Please describe the performance impact: Node discovery should be at least slightly more performant since each node connects directly to each satellite and no longer needs to wait for bootstrapping. It probably won't be faster in real time on start up since each node waits a random amount of time (less than 1 hr) to initialize its first connection (jitter).
* create upsert query for check-in method
* add tests
* fix lint err
* add benchmark test for db query
* fix lint and tests
* add a unit test, fix lint
* add address to tests
* replace print w/ b.Fatal
* refactor query per CR comments
* fix disqualified, only set if null
* fix query
* add version to updatecheckin query
* fix version
* fix tests
* change version for tests
* add version to tests
* add IP, add transport, mv unit test
* use node.address as arg
* add last ip
* fix lint
