Remove the logic associated to the old transfer queue.
A new transfer queue (gracefulexit_segment_transfer_queue) has been created for migration to segmentLoop.
Transfers from the old queue were not moved to the new queue.
Instead, it was still used for nodes which have initiated graceful exit before migration.
There is no such node left, so we can remove all this logic.
In a next step, we will drop the table.
Change-Id: I3aa9bc29b76065d34b57a73f6e9c9d0297587f54
Currently TextMaxVerifyCount flakes in some tests, try increasing the
sleep time to ensure that things are slow enough to trigger the error
condition.
Also pass ctx to all the funcs so we can handle sleep better.
Change-Id: I605b6ea8b14a0a66d81a605ce3251f57a1669c00
At some point we moved metabase package outside Metainfo
but we didn't do that for satellite structure. This change
refactors only tests.
When uplink will be adjusted we can remove old entries in
Metainfo struct.
Change-Id: I2b66ed29f539b0ec0f490cad42c72840e0351bcb
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration and made accessible through graceful exit db in another one.
This changes makes graceful exit enqueue transfer items for new exiting nodes in the new table.
Change-Id: I7bd00de13e749be521d63ef3b80c168df66b9433
For being able to use the segment metainfo loop, graceful exit transfers have to include the segment stream_id/position instead of the path. For this, we created a new table graceful_exit_segment_transfer_queue that will replace the graceful_exit_transfer_queue. The table has been created in a previous migration.
This change gives access to this table.
Graceful Exit doesn't use the table yet, this will be done in a next change.
Change-Id: I6c09cff4cc45f0529813a8898ddb2d14aadb2cb8
Estimate speed of the uploads by calculating the time a client has been in a non-congested state. Storage node is uncongested when it has used up over 80% of its maximum concurrent requests capacity.
Currently it's disabled by default.
fillInBlobAccess was using a non-pointer receiver so the receiver wasn't
being modified. Luckily, this seems to be only being used in tests.
Change-Id: Ice01419933295562d558d48ba314d476660b67bd
Added expectations endpoint (estimations and distributed), added
coalesce to db query, so in case of empty payouts db 0 will be returned instead of error.
Change-Id: I535f14ef097876448d8949bc302895b25da2b6e7
Currently, if a node has untrusted a satellite, the satellite can still
successfully ping the node. If a node decide to untrust a satellite, the
satellite should also mark it as conact failed
Change-Id: Idf80fa00d9849205533dd3e5b3b775b5b9686705
errs.Class should not contain "error" in the name, since that causes a
lot of stutter in the error logs. As an example a log line could end up
looking like:
ERROR node stats service error: satellitedbs error: node stats database error: no rows
Whereas something like:
ERROR nodestats service: satellitedbs: nodestatsdb: no rows
Would contain all the necessary information without the stutter.
Change-Id: I7b7cb7e592ebab4bcfadc1eef11122584d2b20e0
Initially there were pkg and private packages, however for all practical
purposes there's no significant difference between them. It's clearer to
have a single private package - and when we do get a specific
abstraction that needs to be reused, we can move it to storj.io/common
or storj.io/private.
Change-Id: Ibc2036e67f312f5d63cb4a97f5a92e38ae413aa5
Initially we duplicated the code to avoid large scale changes to
the packages. Now we are past metainfo refactor we can remove the
duplication.
Change-Id: I9d0b2756cc6e2a2f4d576afa408a15273a7e1cef
metabase has become a central concept and it's more suitable for it to
be directly nested under satellite rather than being part of metainfo.
metainfo is going to be the "endpoint" logic for handling requests.
Change-Id: I53770d6761ac1e9a1283b5aa68f471b21e784198
QUIC
We want to encourage storagenodes to open their udp port. This PR
changes contact service in satellite to try to connect to nodes through
QUIC. If satellite can't reach nodes through quic, it will send an error
message back to nodes. On the nodes side, it will always log out error
message from check in if the error message is not empty.
Whether satellite can reach nodes through quic has no affect on nodes'
uptime check.
Change-Id: I5ebf80f921c4a6504997d83c8bd45226da9d3703
This is a temporary precaution to avoid incorrectly auditing nodes for pieces that were deleted between database backups if we have to restore from a previous backup.
Here we send pieces to trash rather than directly deleting them from storage nodes so we can restore from trash after a db restoration.
Change-Id: Icd979d2a9a755e7428190c0129c9bc969649d544
TestStorageNodeApi is failing due to very slight differences in
float values. This change rounds these values to 3 decimal places before
comparing them.
Change-Id: Ic7fae3a5e0a0a942c03d982bfa7b19357f2e3d2e
while satellites have also run this logic, old satellites that
no longer exist cannot and so the node cannot get the updated
data. this locally migrates it so that the calculations for
the undistributed amounts are correct.
there's also some tab/space whitespace and gofmt fixes.
Change-Id: I470879703314fe6541eaba5f21b47849781894f8
Remove the orders Settlement endpoint because it isn't used and it was
already always returning an error.
Change-Id: I81486fbe7044a1444182173bc0693698ee7cfe7e
allow disabling tcp/quic
In order to have more control of a server so that we can
simulate connection failures in `testplanet`, this PR changes
quic.Listener to accept an existing UDPConn instead of relying on the
quic-go library to create the UDPConn.
This PR also adds two flags on the `server.Config` struct to allow
enabling/disabling tcp/tls listener and quic listener. By default, they
are both set to true.
- `DisableTCPTLS`: internal flag, disables tcp/tls listener.
- `DisableQUIC`: hidden flag, disables quic listener
By making the `DisableQUIC` a hidden flag, it allows storagenode operators to
have the ability to disable quic traffic in case their set up can't work
with udp traffic.
Change-Id: I853b12435d988b9c41ad9b873fd57480d792e378
Delete satellite order methods and DB tables which aren't used anymore
after we have done a refactoring on the orders to stuck bucket
information in the orders' encrypted metadata.
There are also configuration parameters and a satellite chore that
aren't needed anymore after the orders refactoring.
Change-Id: Ida3682b95921df70792284b42c96d2508bf8ca9c
From the name of the function and from the way it is used (only called
in one place, from "storj.io/storagenode/gracefulexit".(*Chore).Run()),
it should not return graceful exits that have already completed.
In particular, this causes a problem in the case that a node has already
completed a graceful exit from one satellite, after which the satellite
was decommissioned and no longer in the "trusted" list. This causes an
error message to show up in the node logs every single minute like
"failed to get satellite address ... satellite \"X\" is untrusted".
https://forum.storj.io/t/error-gracefulexit-service-failed-to-get-satellite-address/11372
This change causes ListPendingExits to list pending exits only, not all
exits.
Correspondingly, the check for whether an exit is already completed, in
(*Chore).Run(), becomes unnecessary and is here removed.
Change-Id: Ia3e9bb3e92be4a32ebcbda0321e3fe61d77deaa8
When using calling time.Now() multiple times, they can cross
month boundary causing errors in calculations.
Change-Id: I66b5be7598f3bf475b4b5fe0dcce82eee55b3134
Full scope:
storagenode/{console,nodestats,notifications,reputation,storagenodedb},
web/storagenode
These columns are deprecated. They used to be for the uptime reputation
system which has been replaced by downtime tracking with audits.
Change-Id: I151d6569577d89733ac97af21a1d885323522b21
On servers with non-UTC it would have calculated a different month boundary.
If node joined in current month calculations will be related on amount of days node've been working.
Change-Id: Ie572b197f50c6cdff5a044a53dfb5b9138f82f24
Full prefix: satellite/{overlay,nodestats},storagenode/{reputation,nodestats}
Allow the storagenode to receive its audit history data from the
satellite via the satellite's GetStats endpoint.
The storagenode does not save this data for use in the API yet.
Change-Id: I9488f4d7a4ccb4ccf8336b8e4aeb3e5beee54979
Add the upload size to the log lines of the storagenode Upload endpoint
to provides the information to Storage node operators.
Change-Id: Ife661d28be72c2bf02579093e21fa811566ac8dd
